diff mbox series

[v3,27/36] dts: msm8916: replace with upstream DTS

Message ID 20240130-b4-qcom-common-target-v3-27-e523cbf9e556@linaro.org
State Superseded
Headers show
Series Qualcomm generic board support | expand

Commit Message

Caleb Connolly Jan. 30, 2024, 2:05 p.m. UTC
Drop the U-Boot specific dragonboard410c.dts in favour of the upstream
msm8916-sbc.dts. No additional changes are needed to this DTS for U-Boot
support.

Taken from kernel tag v6.7

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
---
 arch/arm/dts/Makefile                   |    2 +-
 arch/arm/dts/apq8016-sbc-u-boot.dtsi    |   11 +
 arch/arm/dts/apq8016-sbc.dts            |  729 +++++++++
 arch/arm/dts/dragonboard410c-uboot.dtsi |   44 -
 arch/arm/dts/dragonboard410c.dts        |  221 ---
 arch/arm/dts/msm8916.dtsi               | 2702 +++++++++++++++++++++++++++++++
 configs/dragonboard410c_defconfig       |    2 +-
 7 files changed, 3444 insertions(+), 267 deletions(-)

Comments

Sumit Garg Feb. 2, 2024, 8:38 a.m. UTC | #1
On Tue, 30 Jan 2024 at 19:35, Caleb Connolly <caleb.connolly@linaro.org> wrote:
>
> Drop the U-Boot specific dragonboard410c.dts in favour of the upstream
> msm8916-sbc.dts. No additional changes are needed to this DTS for U-Boot
> support.
>
> Taken from kernel tag v6.7
>
> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
> Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
> ---
>  arch/arm/dts/Makefile                   |    2 +-
>  arch/arm/dts/apq8016-sbc-u-boot.dtsi    |   11 +
>  arch/arm/dts/apq8016-sbc.dts            |  729 +++++++++
>  arch/arm/dts/dragonboard410c-uboot.dtsi |   44 -
>  arch/arm/dts/dragonboard410c.dts        |  221 ---
>  arch/arm/dts/msm8916.dtsi               | 2702 +++++++++++++++++++++++++++++++
>  configs/dragonboard410c_defconfig       |    2 +-
>  7 files changed, 3444 insertions(+), 267 deletions(-)
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 92a4465f5f41..4c8b29b983a4 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -628,7 +628,7 @@ dtb-$(CONFIG_TARGET_SL28) += fsl-ls1028a-kontron-sl28.dtb \
>
>  dtb-$(CONFIG_TARGET_TEN64) += fsl-ls1088a-ten64.dtb
>
> -dtb-$(CONFIG_ARCH_SNAPDRAGON) += dragonboard410c.dtb \
> +dtb-$(CONFIG_ARCH_SNAPDRAGON) += apq8016-sbc.dtb \
>         dragonboard820c.dtb \
>         sdm845-db845c.dtb \
>         sdm845-samsung-starqltechn.dtb \
> diff --git a/arch/arm/dts/apq8016-sbc-u-boot.dtsi b/arch/arm/dts/apq8016-sbc-u-boot.dtsi
> new file mode 100644
> index 000000000000..838e629a8ade
> --- /dev/null
> +++ b/arch/arm/dts/apq8016-sbc-u-boot.dtsi
> @@ -0,0 +1,11 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2024, Linaro Ltd.
> + */
> +
> +/ {
> +       /* When running as a first-stage bootloader this isn't filled in automatically */
> +       memory@80000000 {
> +               reg = <0 0x80000000 0 0x3da00000>;
> +       };
> +};

With U-Boot booting as the first stage bootloader, we have to enable
the serial driver prior to relocation. Although we have
DM_FLAG_PRE_RELOC for clock and the serial driver, what about the
pinctrl driver required to configure UART specific pins prior to
relocation? Without following change we get broken U-Boot log without
header prints:

diff --git a/arch/arm/dts/apq8016-sbc-u-boot.dtsi
b/arch/arm/dts/apq8016-sbc-u-boot.dtsi
index 838e629a8ade..0a21732be6cb 100644
--- a/arch/arm/dts/apq8016-sbc-u-boot.dtsi
+++ b/arch/arm/dts/apq8016-sbc-u-boot.dtsi
@@ -9,3 +9,11 @@
                reg = <0 0x80000000 0 0x3da00000>;
        };
 };
+
+&tlmm {
+       bootph-all;
+
+       blsp-uart2-default-state {
+               bootph-all;
+       };
+};

Fixes broken U-Boot log:

S - Flash Throughput, 82000 KB/s  (1503304 Bytes,  18330 us)
S - DDR Frequency, 400 MHz
Core:  135 devices, 20 uclasses, devicetree: board
MMC:   mmc@7824900: 0, mmc@7864900: 1
Loading Environment from MMC... OK
In:    serial@78b0000
Out:   serial@78b0000
Err:   serial@78b0000
## Error: Can't overwrite "serial#"
## Error inserting "serial#" variable, errno=1
Net:   No ethernet found.
Hit any key to stop autoboot:  0
dragonboard410c =>

-Sumit
Caleb Connolly Feb. 9, 2024, 4:06 p.m. UTC | #2
On 02/02/2024 08:38, Sumit Garg wrote:
> On Tue, 30 Jan 2024 at 19:35, Caleb Connolly <caleb.connolly@linaro.org> wrote:
>>
>> Drop the U-Boot specific dragonboard410c.dts in favour of the upstream
>> msm8916-sbc.dts. No additional changes are needed to this DTS for U-Boot
>> support.
>>
>> Taken from kernel tag v6.7
>>
>> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
>> Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
>> ---
>>  arch/arm/dts/Makefile                   |    2 +-
>>  arch/arm/dts/apq8016-sbc-u-boot.dtsi    |   11 +
>>  arch/arm/dts/apq8016-sbc.dts            |  729 +++++++++
>>  arch/arm/dts/dragonboard410c-uboot.dtsi |   44 -
>>  arch/arm/dts/dragonboard410c.dts        |  221 ---
>>  arch/arm/dts/msm8916.dtsi               | 2702 +++++++++++++++++++++++++++++++
>>  configs/dragonboard410c_defconfig       |    2 +-
>>  7 files changed, 3444 insertions(+), 267 deletions(-)
>>
>> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
>> index 92a4465f5f41..4c8b29b983a4 100644
>> --- a/arch/arm/dts/Makefile
>> +++ b/arch/arm/dts/Makefile
>> @@ -628,7 +628,7 @@ dtb-$(CONFIG_TARGET_SL28) += fsl-ls1028a-kontron-sl28.dtb \
>>
>>  dtb-$(CONFIG_TARGET_TEN64) += fsl-ls1088a-ten64.dtb
>>
>> -dtb-$(CONFIG_ARCH_SNAPDRAGON) += dragonboard410c.dtb \
>> +dtb-$(CONFIG_ARCH_SNAPDRAGON) += apq8016-sbc.dtb \
>>         dragonboard820c.dtb \
>>         sdm845-db845c.dtb \
>>         sdm845-samsung-starqltechn.dtb \
>> diff --git a/arch/arm/dts/apq8016-sbc-u-boot.dtsi b/arch/arm/dts/apq8016-sbc-u-boot.dtsi
>> new file mode 100644
>> index 000000000000..838e629a8ade
>> --- /dev/null
>> +++ b/arch/arm/dts/apq8016-sbc-u-boot.dtsi
>> @@ -0,0 +1,11 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (c) 2024, Linaro Ltd.
>> + */
>> +
>> +/ {
>> +       /* When running as a first-stage bootloader this isn't filled in automatically */
>> +       memory@80000000 {
>> +               reg = <0 0x80000000 0 0x3da00000>;
>> +       };
>> +};
> 
> With U-Boot booting as the first stage bootloader, we have to enable
> the serial driver prior to relocation. Although we have
> DM_FLAG_PRE_RELOC for clock and the serial driver, what about the
> pinctrl driver required to configure UART specific pins prior to
> relocation? Without following change we get broken U-Boot log without
> header prints:

Ohhh nice! This makes a whole lot of sense. Thanks for figuring this out.

I finally got my hands on some db410c's (thanks Neil!) and can confirm
this fixes the issue. I tried using DM_FLAG_PRE_RELOC on the pinctrl
driver but it doesn't seem like that's enough to get pinctrl going. I'll
pick your patch below.
> 
> diff --git a/arch/arm/dts/apq8016-sbc-u-boot.dtsi
> b/arch/arm/dts/apq8016-sbc-u-boot.dtsi
> index 838e629a8ade..0a21732be6cb 100644
> --- a/arch/arm/dts/apq8016-sbc-u-boot.dtsi
> +++ b/arch/arm/dts/apq8016-sbc-u-boot.dtsi
> @@ -9,3 +9,11 @@
>                 reg = <0 0x80000000 0 0x3da00000>;
>         };
>  };
> +
> +&tlmm {
> +       bootph-all;
> +
> +       blsp-uart2-default-state {
> +               bootph-all;
> +       };
> +};
> 
> Fixes broken U-Boot log:
> 
> S - Flash Throughput, 82000 KB/s  (1503304 Bytes,  18330 us)
> S - DDR Frequency, 400 MHz
> Core:  135 devices, 20 uclasses, devicetree: board
> MMC:   mmc@7824900: 0, mmc@7864900: 1
> Loading Environment from MMC... OK
> In:    serial@78b0000
> Out:   serial@78b0000
> Err:   serial@78b0000
> ## Error: Can't overwrite "serial#"
> ## Error inserting "serial#" variable, errno=1
> Net:   No ethernet found.
> Hit any key to stop autoboot:  0
> dragonboard410c =>
> 
> -Sumit
diff mbox series

Patch

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 92a4465f5f41..4c8b29b983a4 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -628,7 +628,7 @@  dtb-$(CONFIG_TARGET_SL28) += fsl-ls1028a-kontron-sl28.dtb \
 
 dtb-$(CONFIG_TARGET_TEN64) += fsl-ls1088a-ten64.dtb
 
-dtb-$(CONFIG_ARCH_SNAPDRAGON) += dragonboard410c.dtb \
+dtb-$(CONFIG_ARCH_SNAPDRAGON) += apq8016-sbc.dtb \
 	dragonboard820c.dtb \
 	sdm845-db845c.dtb \
 	sdm845-samsung-starqltechn.dtb \
diff --git a/arch/arm/dts/apq8016-sbc-u-boot.dtsi b/arch/arm/dts/apq8016-sbc-u-boot.dtsi
new file mode 100644
index 000000000000..838e629a8ade
--- /dev/null
+++ b/arch/arm/dts/apq8016-sbc-u-boot.dtsi
@@ -0,0 +1,11 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2024, Linaro Ltd.
+ */
+
+/ {
+	/* When running as a first-stage bootloader this isn't filled in automatically */
+	memory@80000000 {
+		reg = <0 0x80000000 0 0x3da00000>;
+	};
+};
diff --git a/arch/arm/dts/apq8016-sbc.dts b/arch/arm/dts/apq8016-sbc.dts
new file mode 100644
index 000000000000..9ffad7d1f2b6
--- /dev/null
+++ b/arch/arm/dts/apq8016-sbc.dts
@@ -0,0 +1,729 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
+#include <dt-bindings/sound/apq8016-lpass.h>
+
+/ {
+	model = "Qualcomm Technologies, Inc. APQ 8016 SBC";
+	compatible = "qcom,apq8016-sbc", "qcom,apq8016";
+
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart2;
+		serial1 = &blsp_uart1;
+		usid0 = &pm8916_0;
+		i2c0 = &blsp_i2c2;
+		i2c1 = &blsp_i2c6;
+		i2c3 = &blsp_i2c4;
+		spi0 = &blsp_spi5;
+		spi1 = &blsp_spi3;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+		ramoops@bff00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xbff00000 0x0 0x100000>;
+
+			record-size = <0x20000>;
+			console-size = <0x20000>;
+			ftrace-size = <0x20000>;
+		};
+	};
+
+	usb2513 {
+		compatible = "smsc,usb3503";
+		reset-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_LOW>;
+		initial-mode = <1>;
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_id_default>;
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7533_out>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&msm_key_volp_n_default>;
+
+		button {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&tlmm_leds>,
+			    <&pm8916_gpios_leds>,
+			    <&pm8916_mpps_leds>;
+
+		compatible = "gpio-leds";
+
+		led@1 {
+			label = "apq8016-sbc:green:user1";
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led@2 {
+			label = "apq8016-sbc:green:user2";
+			function = LED_FUNCTION_DISK_ACTIVITY;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&tlmm 120 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led@3 {
+			label = "apq8016-sbc:green:user3";
+			function = LED_FUNCTION_DISK_ACTIVITY;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+
+		led@4 {
+			label = "apq8016-sbc:green:user4";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+			panic-indicator;
+			default-state = "off";
+		};
+
+		led@5 {
+			label = "apq8016-sbc:yellow:wlan";
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_YELLOW>;
+			gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		led@6 {
+			label = "apq8016-sbc:blue:bt";
+			function = LED_FUNCTION_BLUETOOTH;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "bluetooth-power";
+			default-state = "off";
+		};
+	};
+};
+
+&blsp_i2c2 {
+	/* On Low speed expansion: LS-I2C0 */
+	status = "okay";
+};
+
+&blsp_i2c4 {
+	/* On High speed expansion: HS-I2C2 */
+	status = "okay";
+
+	adv_bridge: bridge@39 {
+		status = "okay";
+
+		compatible = "adi,adv7533";
+		reg = <0x39>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+
+		adi,dsi-lanes = <4>;
+		clocks = <&rpmcc RPM_SMD_BB_CLK2>;
+		clock-names = "cec";
+
+		pd-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+
+		avdd-supply = <&pm8916_l6>;
+		a2vdd-supply = <&pm8916_l6>;
+		dvdd-supply = <&pm8916_l6>;
+		pvdd-supply = <&pm8916_l6>;
+		v1p2-supply = <&pm8916_l6>;
+		v3p3-supply = <&pm8916_l17>;
+
+		pinctrl-names = "default","sleep";
+		pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>;
+		pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>;
+		#sound-dai-cells = <1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7533_in: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7533_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&blsp_i2c6 {
+	/* On Low speed expansion: LS-I2C1 */
+	status = "okay";
+};
+
+&blsp_spi3 {
+	/* On High speed expansion: HS-SPI1 */
+	status = "okay";
+};
+
+&blsp_spi5 {
+	/* On Low speed expansion: LS-SPI0 */
+	status = "okay";
+};
+
+&blsp_uart1 {
+	status = "okay";
+	label = "LS-UART0";
+};
+
+&blsp_uart2 {
+	status = "okay";
+	label = "LS-UART1";
+};
+
+&camss {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&lpass {
+	status = "okay";
+};
+
+&lpass_codec {
+	status = "okay";
+};
+
+&mba_mem {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&adv7533_in>;
+};
+
+&mpss {
+	status = "okay";
+
+	firmware-name = "qcom/apq8016/mba.mbn", "qcom/apq8016/modem.mbn";
+};
+
+&mpss_mem {
+	status = "okay";
+	reg = <0x0 0x86800000 0x0 0x2b00000>;
+};
+
+&pm8916_codec {
+	status = "okay";
+	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+};
+
+&pm8916_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pm8916_rpm_regulators {
+	/*
+	 * The 96Boards specification expects a 1.8V power rail on the low-speed
+	 * expansion connector that is able to provide at least 0.18W / 100 mA.
+	 * L15/L16 are connected in parallel to provide 55 mA each. A minimum load
+	 * must be specified to ensure the regulators are not put in LPM where they
+	 * would only provide 5 mA.
+	 */
+	pm8916_l15: l15 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-system-load = <50000>;
+		regulator-allow-set-load;
+		regulator-always-on;
+	};
+	pm8916_l16: l16 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-system-load = <50000>;
+		regulator-allow-set-load;
+		regulator-always-on;
+	};
+
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+};
+
+&sound {
+	status = "okay";
+
+	pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>;
+	pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>;
+	pinctrl-names = "default", "sleep";
+	model = "DB410c";
+	audio-routing =
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+
+	quaternary-dai-link {
+		link-name = "ADV7533";
+		cpu {
+			sound-dai = <&lpass MI2S_QUATERNARY>;
+		};
+		codec {
+			sound-dai = <&adv_bridge 0>;
+		};
+	};
+
+	primary-dai-link {
+		link-name = "WCD";
+		cpu {
+			sound-dai = <&lpass MI2S_PRIMARY>;
+		};
+		codec {
+			sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>;
+		};
+	};
+
+	tertiary-dai-link {
+		link-name = "WCD-Capture";
+		cpu {
+			sound-dai = <&lpass MI2S_TERTIARY>;
+		};
+		codec {
+			sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>;
+		};
+	};
+};
+
+&usb {
+	status = "okay";
+	extcon = <&usb_id>, <&usb_id>;
+
+	pinctrl-names = "default", "device";
+	pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>;
+	pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>;
+};
+
+&usb_hs_phy {
+	extcon = <&usb_id>;
+};
+
+&venus {
+	status = "okay";
+};
+
+&venus_mem {
+	status = "okay";
+};
+
+&wcnss {
+	status = "okay";
+	firmware-name = "qcom/apq8016/wcnss.mbn";
+};
+
+&wcnss_ctrl {
+	firmware-name = "qcom/apq8016/WCNSS_qcom_wlan_nv_sbc.bin";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&wcnss_mem {
+	status = "okay";
+};
+
+/* Enable CoreSight */
+&cti0 { status = "okay"; };
+&cti1 { status = "okay"; };
+&cti12 { status = "okay"; };
+&cti13 { status = "okay"; };
+&cti14 { status = "okay"; };
+&cti15 { status = "okay"; };
+&debug0 { status = "okay"; };
+&debug1 { status = "okay"; };
+&debug2 { status = "okay"; };
+&debug3 { status = "okay"; };
+&etf { status = "okay"; };
+&etm0 { status = "okay"; };
+&etm1 { status = "okay"; };
+&etm2 { status = "okay"; };
+&etm3 { status = "okay"; };
+&etr { status = "okay"; };
+&funnel0 { status = "okay"; };
+&funnel1 { status = "okay"; };
+&replicator { status = "okay"; };
+&stm { status = "okay"; };
+&tpiu { status = "okay"; };
+
+/*
+ * 2mA drive strength is not enough when connecting multiple
+ * I2C devices with different pull up resistors.
+ */
+&blsp_i2c2_default {
+	drive-strength = <16>;
+};
+
+&blsp_i2c4_default {
+	drive-strength = <16>;
+};
+
+&blsp_i2c6_default {
+	drive-strength = <16>;
+};
+
+/*
+ * GPIO name legend: proper name = the GPIO line is used as GPIO
+ *         NC = not connected (pin out but not routed from the chip to
+ *              anything the board)
+ *         "[PER]" = pin is muxed for [peripheral] (not GPIO)
+ *         LSEC = Low Speed External Connector
+ *         HSEC = High Speed External Connector
+ *
+ * Line names are taken from the schematic "DragonBoard410c"
+ * dated monday, august 31, 2015. Page 5 in particular.
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Board naming of a line and the schematic name of
+ * the same line are in conflict, the 96Board specification
+ * takes precedence, which means that the external UART on the
+ * LSEC is named UART0 while the schematic and SoC names this
+ * UART3. This is only for the informational lines i.e. "[FOO]",
+ * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
+ * ones actually used for GPIO.
+ */
+
+&tlmm {
+	gpio-line-names =
+		"[UART0_TX]", /* GPIO_0, LSEC pin 5 */
+		"[UART0_RX]", /* GPIO_1, LSEC pin 7 */
+		"[UART0_CTS_N]", /* GPIO_2, LSEC pin 3 */
+		"[UART0_RTS_N]", /* GPIO_3, LSEC pin 9 */
+		"[UART1_TX]", /* GPIO_4, LSEC pin 11 */
+		"[UART1_RX]", /* GPIO_5, LSEC pin 13 */
+		"[I2C0_SDA]", /* GPIO_8, LSEC pin 17 */
+		"[I2C0_SCL]", /* GPIO_7, LSEC pin 15 */
+		"[SPI1_DOUT]", /* SPI1_MOSI, HSEC pin 1 */
+		"[SPI1_DIN]", /* SPI1_MISO, HSEC pin 11 */
+		"[SPI1_CS]", /* SPI1_CS_N, HSEC pin 7 */
+		"[SPI1_SCLK]", /* SPI1_CLK, HSEC pin 9 */
+		"GPIO-B", /* LS_EXP_GPIO_B, LSEC pin 24 */
+		"GPIO-C", /* LS_EXP_GPIO_C, LSEC pin 25 */
+		"[I2C3_SDA]", /* HSEC pin 38 */
+		"[I2C3_SCL]", /* HSEC pin 36 */
+		"[SPI0_MOSI]", /* LSEC pin 14 */
+		"[SPI0_MISO]", /* LSEC pin 10 */
+		"[SPI0_CS_N]", /* LSEC pin 12 */
+		"[SPI0_CLK]", /* LSEC pin 8 */
+		"HDMI_HPD_N", /* GPIO 20 */
+		"USR_LED_1_CTRL",
+		"[I2C1_SDA]", /* GPIO_22, LSEC pin 21 */
+		"[I2C1_SCL]", /* GPIO_23, LSEC pin 19 */
+		"GPIO-G", /* LS_EXP_GPIO_G, LSEC pin 29 */
+		"GPIO-H", /* LS_EXP_GPIO_H, LSEC pin 30 */
+		"[CSI0_MCLK]", /* HSEC pin 15 */
+		"[CSI1_MCLK]", /* HSEC pin 17 */
+		"GPIO-K", /* LS_EXP_GPIO_K, LSEC pin 33 */
+		"[I2C2_SDA]", /* HSEC pin 34 */
+		"[I2C2_SCL]", /* HSEC pin 32 */
+		"DSI2HDMI_INT_N",
+		"DSI_SW_SEL_APQ",
+		"GPIO-L", /* LS_EXP_GPIO_L, LSEC pin 34 */
+		"GPIO-J", /* LS_EXP_GPIO_J, LSEC pin 32 */
+		"GPIO-I", /* LS_EXP_GPIO_I, LSEC pin 31 */
+		"GPIO-A", /* LS_EXP_GPIO_A, LSEC pin 23 */
+		"FORCED_USB_BOOT",
+		"SD_CARD_DET_N",
+		"[WCSS_BT_SSBI]",
+		"[WCSS_WLAN_DATA_2]", /* GPIO 40 */
+		"[WCSS_WLAN_DATA_1]",
+		"[WCSS_WLAN_DATA_0]",
+		"[WCSS_WLAN_SET]",
+		"[WCSS_WLAN_CLK]",
+		"[WCSS_FM_SSBI]",
+		"[WCSS_FM_SDI]",
+		"[WCSS_BT_DAT_CTL]",
+		"[WCSS_BT_DAT_STB]",
+		"NC",
+		"NC", /* GPIO 50 */
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC", /* GPIO 60 */
+		"NC",
+		"NC",
+		"[CDC_PDM0_CLK]",
+		"[CDC_PDM0_SYNC]",
+		"[CDC_PDM0_TX0]",
+		"[CDC_PDM0_RX0]",
+		"[CDC_PDM0_RX1]",
+		"[CDC_PDM0_RX2]",
+		"GPIO-D", /* LS_EXP_GPIO_D, LSEC pin 26 */
+		"NC", /* GPIO 70 */
+		"NC",
+		"NC",
+		"NC",
+		"NC", /* GPIO 74 */
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"BOOT_CONFIG_0", /* GPIO 80 */
+		"BOOT_CONFIG_1",
+		"BOOT_CONFIG_2",
+		"BOOT_CONFIG_3",
+		"NC",
+		"NC",
+		"BOOT_CONFIG_5",
+		"NC",
+		"NC",
+		"NC",
+		"NC", /* GPIO 90 */
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC", /* GPIO 100 */
+		"NC",
+		"NC",
+		"NC",
+		"SSBI_GPS",
+		"NC",
+		"NC",
+		"KEY_VOLP_N",
+		"NC",
+		"NC",
+		"[LS_EXP_MI2S_WS]", /* GPIO 110 */
+		"NC",
+		"NC",
+		"[LS_EXP_MI2S_SCK]",
+		"[LS_EXP_MI2S_DATA0]",
+		"GPIO-E", /* LS_EXP_GPIO_E, LSEC pin 27 */
+		"NC",
+		"[DSI2HDMI_MI2S_WS]",
+		"[DSI2HDMI_MI2S_SCK]",
+		"[DSI2HDMI_MI2S_DATA0]",
+		"USR_LED_2_CTRL", /* GPIO 120 */
+		"SB_HS_ID";
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tlmm_leds: tlmm-leds-state {
+		pins = "gpio21", "gpio120";
+		function = "gpio";
+
+		output-low;
+	};
+
+	usb_id_default: usb-id-default-state {
+		pins = "gpio121";
+		function = "gpio";
+
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	adv7533_int_active: adv533-int-active-state {
+		pins = "gpio31";
+		function = "gpio";
+
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	adv7533_int_suspend: adv7533-int-suspend-state {
+		pins = "gpio31";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	adv7533_switch_active: adv7533-switch-active-state {
+		pins = "gpio32";
+		function = "gpio";
+
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	adv7533_switch_suspend: adv7533-switch-suspend-state {
+		pins = "gpio32";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	msm_key_volp_n_default: msm-key-volp-n-default-state {
+		pins = "gpio107";
+		function = "gpio";
+
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
+
+&pm8916_gpios {
+	gpio-line-names =
+		"USR_LED_3_CTRL",
+		"USR_LED_4_CTRL",
+		"USB_HUB_RESET_N_PM",
+		"USB_SW_SEL_PM";
+
+	usb_hub_reset_pm: usb-hub-reset-pm-state {
+		pins = "gpio3";
+		function = PMIC_GPIO_FUNC_NORMAL;
+
+		input-disable;
+		output-high;
+	};
+
+	usb_hub_reset_pm_device: usb-hub-reset-pm-device-state {
+		pins = "gpio3";
+		function = PMIC_GPIO_FUNC_NORMAL;
+
+		output-low;
+	};
+
+	usb_sw_sel_pm: usb-sw-sel-pm-state {
+		pins = "gpio4";
+		function = PMIC_GPIO_FUNC_NORMAL;
+
+		power-source = <PM8916_GPIO_VPH>;
+		input-disable;
+		output-high;
+	};
+
+	usb_sw_sel_pm_device: usb-sw-sel-pm-device-state {
+		pins = "gpio4";
+		function = PMIC_GPIO_FUNC_NORMAL;
+
+		power-source = <PM8916_GPIO_VPH>;
+		input-disable;
+		output-low;
+	};
+
+	pm8916_gpios_leds: pm8916-gpios-leds-state {
+		pins = "gpio1", "gpio2";
+		function = PMIC_GPIO_FUNC_NORMAL;
+
+		output-low;
+	};
+};
+
+&pm8916_mpps {
+	gpio-line-names =
+		"VDD_PX_BIAS",
+		"WLAN_LED_CTRL",
+		"BT_LED_CTRL",
+		"GPIO-F"; /* LS_EXP_GPIO_F, LSEC pin 28 */
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&ls_exp_gpio_f>;
+
+	ls_exp_gpio_f: pm8916-mpp4-state {
+		pins = "mpp4";
+		function = "digital";
+
+		output-low;
+		power-source = <PM8916_MPP_L5>;	/* 1.8V */
+	};
+
+	pm8916_mpps_leds: pm8916-mpps-state {
+		pins = "mpp2", "mpp3";
+		function = "digital";
+
+		output-low;
+	};
+};
diff --git a/arch/arm/dts/dragonboard410c-uboot.dtsi b/arch/arm/dts/dragonboard410c-uboot.dtsi
deleted file mode 100644
index cec64bf80f99..000000000000
--- a/arch/arm/dts/dragonboard410c-uboot.dtsi
+++ /dev/null
@@ -1,44 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * U-Boot addition to handle Dragonboard 410c pins
- *
- * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
- */
-
-/ {
-
-	smem {
-		bootph-all;
-	};
-
-	soc {
-		bootph-all;
-
-		pinctrl@1000000 {
-			bootph-all;
-
-			uart {
-				bootph-all;
-			};
-		};
-
-		qcom,gcc@1800000 {
-			bootph-all;
-		};
-
-		serial@78b0000 {
-			bootph-all;
-		};
-	};
-};
-
-
-&pm8916_gpios {
-	usb_hub_reset_pm {
-		gpios = <&pm8916_gpios 2 0>;
-	};
-
-	usb_sw_sel_pm {
-		gpios = <&pm8916_gpios 3 0>;
-	};
-};
diff --git a/arch/arm/dts/dragonboard410c.dts b/arch/arm/dts/dragonboard410c.dts
deleted file mode 100644
index 453642b25705..000000000000
--- a/arch/arm/dts/dragonboard410c.dts
+++ /dev/null
@@ -1,221 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Qualcomm APQ8016 based Dragonboard 410C board device tree source
- *
- * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
- */
-
-/dts-v1/;
-
-#include "skeleton64.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Qualcomm Technologies, Inc. Dragonboard 410c";
-	compatible = "qcom,apq8016-sbc", "qcom,apq8016";
-	qcom,msm-id = <0xce 0x0 0xf8 0x0 0xf9 0x0 0xfa 0x0 0xf7 0x0>;
-	qcom,board-id = <0x10018 0x0>;
-	#address-cells = <0x2>;
-	#size-cells = <0x2>;
-
-	aliases {
-		usb0 = "/soc/ehci@78d9000";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x80000000 0 0x3da00000>;
-	};
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		smem_mem: smem_region@86300000 {
-			reg = <0x0 0x86300000 0x0 0x100000>;
-			no-map;
-		};
-	};
-
-	chosen {
-		stdout-path = "/soc/serial@78b0000";
-	};
-
-	smem {
-		compatible = "qcom,smem";
-		memory-region = <&smem_mem>;
-		qcom,rpm-msg-ram = <&rpm_msg_ram>;
-	};
-
-	soc {
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
-		ranges = <0x0 0x0 0x0 0xffffffff>;
-		compatible = "simple-bus";
-
-		rpm_msg_ram: memory@60000 {
-			compatible = "qcom,rpm-msg-ram";
-			reg = <0x60000 0x8000>;
-		};
-
-		soc_gpios: pinctrl@1000000 {
-			compatible = "qcom,msm8916-pinctrl";
-			reg = <0x1000000 0x400000>;
-			gpio-controller;
-			gpio-count = <122>;
-			gpio-bank-name="soc";
-			#gpio-cells = <2>;
-
-			blsp1_uart: uart {
-				function = "blsp1_uart";
-				pins = "GPIO_4", "GPIO_5";
-				drive-strength = <8>;
-				bias-disable;
-			};
-		};
-		clkc: qcom,gcc@1800000 {
-			compatible = "qcom,gcc-msm8916";
-			reg = <0x1800000 0x80000>;
-			#address-cells = <0x1>;
-			#size-cells = <0x0>;
-			#clock-cells = <0x1>;
-		};
-
-		serial@78b0000 {
-			compatible = "qcom,msm-uartdm-v1.4";
-			reg = <0x78b0000 0x200>;
-			clocks = <&clkc 4>;
-			clock-names = "core";
-			pinctrl-names = "uart";
-			pinctrl-0 = <&blsp1_uart>;
-		};
-
-		ehci@78d9000 {
-			compatible = "qcom,ci-hdrc";
-			reg = <0x78d9000 0x400>;
-			phys = <&ehci_phy>;
-
-			ulpi {
-				usb_hs_phy: phy {
-					compatible = "qcom,usb-hs-phy-msm8916",
-						     "qcom,usb-hs-phy";
-					#phy-cells = <0>;
-					clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
-					clock-names = "ref", "sleep";
-					resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
-					reset-names = "phy", "por";
-					qcom,init-seq = /bits/ 8 <0x0 0x44>,
-								 <0x1 0x6b>,
-								 <0x2 0x24>,
-								 <0x3 0x13>;
-				};
-			};
-		};
-
-		sdhci@07824000 {
-			compatible = "qcom,sdhci-msm-v4";
-			reg = <0x7824900 0x11c 0x7824000 0x800>;
-			bus-width = <0x8>;
-			index = <0x0>;
-			non-removable;
-			clock = <&clkc 0>;
-			clock-frequency = <100000000>;
-		};
-
-		sdhci@07864000 {
-			compatible = "qcom,sdhci-msm-v4";
-			reg = <0x7864900 0x11c 0x7864000 0x800>;
-			index = <0x1>;
-			bus-width = <0x4>;
-			clock = <&clkc 1>;
-			clock-frequency = <200000000>;
-			cd-gpios = <&soc_gpios 38 GPIO_ACTIVE_LOW>;
-		};
-
-		wcnss {
-			bt {
-				compatible="qcom,wcnss-bt";
-			};
-
-			wifi {
-				compatible="qcom,wcnss-wlan";
-			};
-		};
-
-		spmi_bus: spmi@200f000 {
-			compatible = "qcom,spmi-pmic-arb";
-			reg = <0x0200f000 0x001000>,
-			      <0x02400000 0x400000>,
-			      <0x02c00000 0x400000>,
-			      <0x03800000 0x200000>,
-			      <0x0200a000 0x002100>;
-			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
-			#address-cells = <0x1>;
-			#size-cells = <0x1>;
-			pmic0: pm8916@0 {
-				compatible = "qcom,spmi-pmic";
-				reg = <0x0 0x1>;
-				#address-cells = <0x1>;
-				#size-cells = <0x1>;
-
-				pon@800 {
-					compatible = "qcom,pm8916-pon";
-					reg = <0x800 0x100>;
-					mode-bootloader = <0x2>;
-					mode-recovery = <0x1>;
-
-					pwrkey {
-						compatible = "qcom,pm8941-pwrkey";
-						debounce = <15625>;
-						bias-pull-up;
-					};
-
-					pm8916_resin: resin {
-						compatible = "qcom,pm8941-resin";
-						debounce = <15625>;
-						bias-pull-up;
-					};
-				};
-
-				pm8916_gpios: pm8916_gpios@c000 {
-					compatible = "qcom,pm8916-gpio";
-					reg = <0xc000 0x400>;
-					gpio-controller;
-					gpio-ranges = <&pm8916_gpios 0 0 4>;
-					#gpio-cells = <2>;
-				};
-			};
-
-			pmic1: pm8916@1 {
-				compatible = "qcom,spmi-pmic";
-				reg = <0x1 0x1>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		user1 {
-			label = "green:user1";
-			gpios = <&soc_gpios 21 0>;
-		};
-
-		user2 {
-			label = "green:user2";
-			gpios = <&soc_gpios 120 0>;
-		};
-
-		user3 {
-			label = "green:user3";
-			gpios = <&pm8916_gpios 0 0>;
-		};
-
-		user4 {
-			label = "green:user4";
-			gpios = <&pm8916_gpios 1 0>;
-		};
-	};
-};
-
-#include "dragonboard410c-uboot.dtsi"
diff --git a/arch/arm/dts/msm8916.dtsi b/arch/arm/dts/msm8916.dtsi
new file mode 100644
index 000000000000..4f799b536a92
--- /dev/null
+++ b/arch/arm/dts/msm8916.dtsi
@@ -0,0 +1,2702 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/arm/coresight-cti-dt.h>
+#include <dt-bindings/clock/qcom,gcc-msm8916.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/interconnect/qcom,msm8916.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/reset/qcom,gcc-msm8916.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0x80000000 0 0>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		tz-apps@86000000 {
+			reg = <0x0 0x86000000 0x0 0x300000>;
+			no-map;
+		};
+
+		smem@86300000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x86300000 0x0 0x100000>;
+			no-map;
+
+			hwlocks = <&tcsr_mutex 3>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		};
+
+		hypervisor@86400000 {
+			reg = <0x0 0x86400000 0x0 0x100000>;
+			no-map;
+		};
+
+		tz@86500000 {
+			reg = <0x0 0x86500000 0x0 0x180000>;
+			no-map;
+		};
+
+		reserved@86680000 {
+			reg = <0x0 0x86680000 0x0 0x80000>;
+			no-map;
+		};
+
+		rmtfs@86700000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x86700000 0x0 0xe0000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+
+		rfsa@867e0000 {
+			reg = <0x0 0x867e0000 0x0 0x20000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@86800000 {
+			/*
+			 * The memory region for the mpss firmware is generally
+			 * relocatable and could be allocated dynamically.
+			 * However, many firmware versions tend to fail when
+			 * loaded to some special addresses, so it is hard to
+			 * define reliable alloc-ranges.
+			 *
+			 * alignment = <0x0 0x400000>;
+			 * alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
+			 */
+			reg = <0x0 0x86800000 0x0 0>; /* size is device-specific */
+			no-map;
+			status = "disabled";
+		};
+
+		wcnss_mem: wcnss {
+			size = <0x0 0x600000>;
+			alignment = <0x0 0x100000>;
+			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
+			no-map;
+			status = "disabled";
+		};
+
+		venus_mem: venus {
+			size = <0x0 0x500000>;
+			alignment = <0x0 0x100000>;
+			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
+			no-map;
+			status = "disabled";
+		};
+
+		mba_mem: mba {
+			size = <0x0 0x100000>;
+			alignment = <0x0 0x100000>;
+			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
+			no-map;
+			status = "disabled";
+		};
+	};
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+			clocks = <&apcs>;
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			qcom,acc = <&cpu0_acc>;
+			qcom,saw = <&cpu0_saw>;
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+			clocks = <&apcs>;
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			qcom,acc = <&cpu1_acc>;
+			qcom,saw = <&cpu1_saw>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+			clocks = <&apcs>;
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			qcom,acc = <&cpu2_acc>;
+			qcom,saw = <&cpu2_saw>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+			clocks = <&apcs>;
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			qcom,acc = <&cpu3_acc>;
+			qcom,saw = <&cpu3_saw>;
+		};
+
+		L2_0: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "standalone-power-collapse";
+				arm,psci-suspend-param = <0x40000002>;
+				entry-latency-us = <130>;
+				exit-latency-us = <150>;
+				min-residency-us = <2000>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+
+			CLUSTER_RET: cluster-retention {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000012>;
+				entry-latency-us = <500>;
+				exit-latency-us = <500>;
+				min-residency-us = <2000>;
+			};
+
+			CLUSTER_PWRDN: cluster-gdhs {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000032>;
+				entry-latency-us = <2000>;
+				exit-latency-us = <2000>;
+				min-residency-us = <6000>;
+			};
+		};
+	};
+
+	cpu_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+		};
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+		};
+		opp-998400000 {
+			opp-hz = /bits/ 64 <998400000>;
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-msm8916", "qcom,scm";
+			clocks = <&gcc GCC_CRYPTO_CLK>,
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_AHB_CLK>;
+			clock-names = "core", "bus", "iface";
+			#reset-cells = <1>;
+
+			qcom,dload-mode = <&tcsr 0x6100>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_SLEEP_0>;
+		};
+
+		CLUSTER_PD: power-domain-cluster {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWRDN>;
+		};
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,msm8916-rpm-proc", "qcom,rpm-proc";
+
+		smd-edge {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8916";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc";
+					#clock-cells = <1>;
+					clocks = <&xo_board>;
+					clock-names = "xo";
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8916-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <1>;
+						};
+						rpmpd_opp_svs_krait: opp2 {
+							opp-level = <2>;
+						};
+						rpmpd_opp_svs_soc: opp3 {
+							opp-level = <3>;
+						};
+						rpmpd_opp_nom: opp4 {
+							opp-level = <4>;
+						};
+						rpmpd_opp_turbo: opp5 {
+							opp-level = <5>;
+						};
+						rpmpd_opp_super_turbo: opp6 {
+							opp-level = <6>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	smp2p-hexagon {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 8 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		hexagon_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		hexagon_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-wcnss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <451>, <431>;
+
+		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 8 18>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <4>;
+
+		wcnss_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		wcnss_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smsm {
+		compatible = "qcom,smsm";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		qcom,ipc-1 = <&apcs 8 13>;
+		qcom,ipc-3 = <&apcs 8 19>;
+
+		apps_smsm: apps@0 {
+			reg = <0>;
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		hexagon_smsm: hexagon@1 {
+			reg = <1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wcnss_smsm: wcnss@6 {
+			reg = <6>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
+
+		rng@22000 {
+			compatible = "qcom,prng";
+			reg = <0x00022000 0x200>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		restart@4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0x004ab000 0x4>;
+		};
+
+		qfprom: qfprom@5c000 {
+			compatible = "qcom,msm8916-qfprom", "qcom,qfprom";
+			reg = <0x0005c000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			tsens_base1: base1@d0 {
+				reg = <0xd0 0x1>;
+				bits = <0 7>;
+			};
+
+			tsens_s0_p1: s0-p1@d0 {
+				reg = <0xd0 0x2>;
+				bits = <7 5>;
+			};
+
+			tsens_s0_p2: s0-p2@d1 {
+				reg = <0xd1 0x2>;
+				bits = <4 5>;
+			};
+
+			tsens_s1_p1: s1-p1@d2 {
+				reg = <0xd2 0x1>;
+				bits = <1 5>;
+			};
+			tsens_s1_p2: s1-p2@d2 {
+				reg = <0xd2 0x2>;
+				bits = <6 5>;
+			};
+			tsens_s2_p1: s2-p1@d3 {
+				reg = <0xd3 0x1>;
+				bits = <3 5>;
+			};
+
+			tsens_s2_p2: s2-p2@d4 {
+				reg = <0xd4 0x1>;
+				bits = <0 5>;
+			};
+
+			// no tsens with hw_id 3
+
+			tsens_s4_p1: s4-p1@d4 {
+				reg = <0xd4 0x2>;
+				bits = <5 5>;
+			};
+
+			tsens_s4_p2: s4-p2@d5 {
+				reg = <0xd5 0x1>;
+				bits = <2 5>;
+			};
+
+			tsens_s5_p1: s5-p1@d5 {
+				reg = <0xd5 0x2>;
+				bits = <7 5>;
+			};
+
+			tsens_s5_p2: s5-p2@d6 {
+				reg = <0xd6 0x2>;
+				bits = <4 5>;
+			};
+
+			tsens_base2: base2@d7 {
+				reg = <0xd7 0x1>;
+				bits = <1 7>;
+			};
+
+			tsens_mode: mode@ef {
+				reg = <0xef 0x1>;
+				bits = <5 3>;
+			};
+		};
+
+		rpm_msg_ram: sram@60000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x00060000 0x8000>;
+		};
+
+		sram@290000 {
+			compatible = "qcom,msm8916-rpm-stats";
+			reg = <0x00290000 0x10000>;
+		};
+
+		bimc: interconnect@400000 {
+			compatible = "qcom,msm8916-bimc";
+			reg = <0x00400000 0x62000>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
+		};
+
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
+			reg = <0x004a9000 0x1000>, /* TM */
+			      <0x004a8000 0x1000>; /* SROT */
+
+			// no hw_id 3
+			nvmem-cells = <&tsens_mode>,
+				      <&tsens_base1>, <&tsens_base2>,
+				      <&tsens_s0_p1>, <&tsens_s0_p2>,
+				      <&tsens_s1_p1>, <&tsens_s1_p2>,
+				      <&tsens_s2_p1>, <&tsens_s2_p2>,
+				      <&tsens_s4_p1>, <&tsens_s4_p2>,
+				      <&tsens_s5_p1>, <&tsens_s5_p2>;
+			nvmem-cell-names = "mode",
+					   "base1", "base2",
+					   "s0_p1", "s0_p2",
+					   "s1_p1", "s1_p2",
+					   "s2_p1", "s2_p2",
+					   "s4_p1", "s4_p2",
+					   "s5_p1", "s5_p2";
+			#qcom,sensors = <5>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
+			#thermal-sensor-cells = <1>;
+		};
+
+		pcnoc: interconnect@500000 {
+			compatible = "qcom,msm8916-pcnoc";
+			reg = <0x00500000 0x11000>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
+				 <&rpmcc RPM_SMD_PCNOC_A_CLK>;
+		};
+
+		snoc: interconnect@580000 {
+			compatible = "qcom,msm8916-snoc";
+			reg = <0x00580000 0x14000>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
+		};
+
+		stm: stm@802000 {
+			compatible = "arm,coresight-stm", "arm,primecell";
+			reg = <0x00802000 0x1000>,
+			      <0x09280000 0x180000>;
+			reg-names = "stm-base", "stm-stimulus-base";
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					stm_out: endpoint {
+						remote-endpoint = <&funnel0_in7>;
+					};
+				};
+			};
+		};
+
+		/* System CTIs */
+		/* CTI 0 - TMC connections */
+		cti0: cti@810000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x00810000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+		};
+
+		/* CTI 1 - TPIU connections */
+		cti1: cti@811000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x00811000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+		};
+
+		/* CTIs 2-11 - no information - not instantiated */
+
+		tpiu: tpiu@820000 {
+			compatible = "arm,coresight-tpiu", "arm,primecell";
+			reg = <0x00820000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			status = "disabled";
+
+			in-ports {
+				port {
+					tpiu_in: endpoint {
+						remote-endpoint = <&replicator_out1>;
+					};
+				};
+			};
+		};
+
+		funnel0: funnel@821000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x00821000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			status = "disabled";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/*
+				 * Not described input ports:
+				 * 0 - connected to Resource and Power Manger CPU ETM
+				 * 1 - not-connected
+				 * 2 - connected to Modem CPU ETM
+				 * 3 - not-connected
+				 * 5 - not-connected
+				 * 6 - connected trought funnel to Wireless CPU ETM
+				 * 7 - connected to STM component
+				 */
+
+				port@4 {
+					reg = <4>;
+					funnel0_in4: endpoint {
+						remote-endpoint = <&funnel1_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					funnel0_in7: endpoint {
+						remote-endpoint = <&stm_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel0_out: endpoint {
+						remote-endpoint = <&etf_in>;
+					};
+				};
+			};
+		};
+
+		replicator: replicator@824000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0x00824000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			status = "disabled";
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					replicator_out0: endpoint {
+						remote-endpoint = <&etr_in>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					replicator_out1: endpoint {
+						remote-endpoint = <&tpiu_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					replicator_in: endpoint {
+						remote-endpoint = <&etf_out>;
+					};
+				};
+			};
+		};
+
+		etf: etf@825000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x00825000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			status = "disabled";
+
+			in-ports {
+				port {
+					etf_in: endpoint {
+						remote-endpoint = <&funnel0_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					etf_out: endpoint {
+						remote-endpoint = <&replicator_in>;
+					};
+				};
+			};
+		};
+
+		etr: etr@826000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x00826000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			status = "disabled";
+
+			in-ports {
+				port {
+					etr_in: endpoint {
+						remote-endpoint = <&replicator_out0>;
+					};
+				};
+			};
+		};
+
+		funnel1: funnel@841000 {	/* APSS funnel only 4 inputs are used */
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x00841000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			status = "disabled";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel1_in0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					funnel1_in1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+				port@2 {
+					reg = <2>;
+					funnel1_in2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+				port@3 {
+					reg = <3>;
+					funnel1_in3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel1_out: endpoint {
+						remote-endpoint = <&funnel0_in4>;
+					};
+				};
+			};
+		};
+
+		debug0: debug@850000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x00850000 0x1000>;
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+			cpu = <&CPU0>;
+			status = "disabled";
+		};
+
+		debug1: debug@852000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x00852000 0x1000>;
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+			cpu = <&CPU1>;
+			status = "disabled";
+		};
+
+		debug2: debug@854000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x00854000 0x1000>;
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+			cpu = <&CPU2>;
+			status = "disabled";
+		};
+
+		debug3: debug@856000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x00856000 0x1000>;
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+			cpu = <&CPU3>;
+			status = "disabled";
+		};
+
+		/* Core CTIs; CTIs 12-15 */
+		/* CTI - CPU-0 */
+		cti12: cti@858000 {
+			compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+				     "arm,primecell";
+			reg = <0x00858000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU0>;
+			arm,cs-dev-assoc = <&etm0>;
+
+			status = "disabled";
+		};
+
+		/* CTI - CPU-1 */
+		cti13: cti@859000 {
+			compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+				     "arm,primecell";
+			reg = <0x00859000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU1>;
+			arm,cs-dev-assoc = <&etm1>;
+
+			status = "disabled";
+		};
+
+		/* CTI - CPU-2 */
+		cti14: cti@85a000 {
+			compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+				     "arm,primecell";
+			reg = <0x0085a000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU2>;
+			arm,cs-dev-assoc = <&etm2>;
+
+			status = "disabled";
+		};
+
+		/* CTI - CPU-3 */
+		cti15: cti@85b000 {
+			compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+				     "arm,primecell";
+			reg = <0x0085b000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU3>;
+			arm,cs-dev-assoc = <&etm3>;
+
+			status = "disabled";
+		};
+
+		etm0: etm@85c000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x0085c000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+			arm,coresight-loses-context-with-cpu;
+
+			cpu = <&CPU0>;
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint = <&funnel1_in0>;
+					};
+				};
+			};
+		};
+
+		etm1: etm@85d000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x0085d000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+			arm,coresight-loses-context-with-cpu;
+
+			cpu = <&CPU1>;
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint = <&funnel1_in1>;
+					};
+				};
+			};
+		};
+
+		etm2: etm@85e000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x0085e000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+			arm,coresight-loses-context-with-cpu;
+
+			cpu = <&CPU2>;
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint = <&funnel1_in2>;
+					};
+				};
+			};
+		};
+
+		etm3: etm@85f000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x0085f000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+			arm,coresight-loses-context-with-cpu;
+
+			cpu = <&CPU3>;
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint = <&funnel1_in3>;
+					};
+				};
+			};
+		};
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,msm8916-pinctrl";
+			reg = <0x01000000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 122>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			blsp_i2c1_default: blsp-i2c1-default-state {
+				pins = "gpio2", "gpio3";
+				function = "blsp_i2c1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c1_sleep: blsp-i2c1-sleep-state {
+				pins = "gpio2", "gpio3";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c2_default: blsp-i2c2-default-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c2_sleep: blsp-i2c2-sleep-state {
+				pins = "gpio6", "gpio7";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c3_default: blsp-i2c3-default-state {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c3_sleep: blsp-i2c3-sleep-state {
+				pins = "gpio10", "gpio11";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c4_default: blsp-i2c4-default-state {
+				pins = "gpio14", "gpio15";
+				function = "blsp_i2c4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c4_sleep: blsp-i2c4-sleep-state {
+				pins = "gpio14", "gpio15";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c5_default: blsp-i2c5-default-state {
+				pins = "gpio18", "gpio19";
+				function = "blsp_i2c5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c5_sleep: blsp-i2c5-sleep-state {
+				pins = "gpio18", "gpio19";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c6_default: blsp-i2c6-default-state {
+				pins = "gpio22", "gpio23";
+				function = "blsp_i2c6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c6_sleep: blsp-i2c6-sleep-state {
+				pins = "gpio22", "gpio23";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_spi1_default: blsp-spi1-default-state {
+				spi-pins {
+					pins = "gpio0", "gpio1", "gpio3";
+					function = "blsp_spi1";
+					drive-strength = <12>;
+					bias-disable;
+				};
+				cs-pins {
+					pins = "gpio2";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+					output-high;
+				};
+			};
+
+			blsp_spi1_sleep: blsp-spi1-sleep-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp_spi2_default: blsp-spi2-default-state {
+				spi-pins {
+					pins = "gpio4", "gpio5", "gpio7";
+					function = "blsp_spi2";
+					drive-strength = <12>;
+					bias-disable;
+				};
+				cs-pins {
+					pins = "gpio6";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+					output-high;
+				};
+			};
+
+			blsp_spi2_sleep: blsp-spi2-sleep-state {
+				pins = "gpio4", "gpio5", "gpio6", "gpio7";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp_spi3_default: blsp-spi3-default-state {
+				spi-pins {
+					pins = "gpio8", "gpio9", "gpio11";
+					function = "blsp_spi3";
+					drive-strength = <12>;
+					bias-disable;
+				};
+				cs-pins {
+					pins = "gpio10";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+					output-high;
+				};
+			};
+
+			blsp_spi3_sleep: blsp-spi3-sleep-state {
+				pins = "gpio8", "gpio9", "gpio10", "gpio11";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp_spi4_default: blsp-spi4-default-state {
+				spi-pins {
+					pins = "gpio12", "gpio13", "gpio15";
+					function = "blsp_spi4";
+					drive-strength = <12>;
+					bias-disable;
+				};
+				cs-pins {
+					pins = "gpio14";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+					output-high;
+				};
+			};
+
+			blsp_spi4_sleep: blsp-spi4-sleep-state {
+				pins = "gpio12", "gpio13", "gpio14", "gpio15";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp_spi5_default: blsp-spi5-default-state {
+				spi-pins {
+					pins = "gpio16", "gpio17", "gpio19";
+					function = "blsp_spi5";
+					drive-strength = <12>;
+					bias-disable;
+				};
+				cs-pins {
+					pins = "gpio18";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+					output-high;
+				};
+			};
+
+			blsp_spi5_sleep: blsp-spi5-sleep-state {
+				pins = "gpio16", "gpio17", "gpio18", "gpio19";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp_spi6_default: blsp-spi6-default-state {
+				spi-pins {
+					pins = "gpio20", "gpio21", "gpio23";
+					function = "blsp_spi6";
+					drive-strength = <12>;
+					bias-disable;
+				};
+				cs-pins {
+					pins = "gpio22";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+					output-high;
+				};
+			};
+
+			blsp_spi6_sleep: blsp-spi6-sleep-state {
+				pins = "gpio20", "gpio21", "gpio22", "gpio23";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp_uart1_default: blsp-uart1-default-state {
+				/* TX, RX, CTS_N, RTS_N */
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "blsp_uart1";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp_uart1_sleep: blsp-uart1-sleep-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp_uart2_default: blsp-uart2-default-state {
+				pins = "gpio4", "gpio5";
+				function = "blsp_uart2";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp_uart2_sleep: blsp-uart2-sleep-state {
+				pins = "gpio4", "gpio5";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			camera_front_default: camera-front-default-state {
+				pwdn-pins {
+					pins = "gpio33";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+				};
+				rst-pins {
+					pins = "gpio28";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+				};
+				mclk1-pins {
+					pins = "gpio27";
+					function = "cam_mclk1";
+					drive-strength = <16>;
+					bias-disable;
+				};
+			};
+
+			camera_rear_default: camera-rear-default-state {
+				pwdn-pins {
+					pins = "gpio34";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+				};
+				rst-pins {
+					pins = "gpio35";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+				};
+				mclk0-pins {
+					pins = "gpio26";
+					function = "cam_mclk0";
+					drive-strength = <16>;
+					bias-disable;
+				};
+			};
+
+			cci0_default: cci0-default-state {
+				pins = "gpio29", "gpio30";
+				function = "cci_i2c";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			cdc_dmic_default: cdc-dmic-default-state {
+				clk-pins {
+					pins = "gpio0";
+					function = "dmic0_clk";
+					drive-strength = <8>;
+				};
+				data-pins {
+					pins = "gpio1";
+					function = "dmic0_data";
+					drive-strength = <8>;
+				};
+			};
+
+			cdc_dmic_sleep: cdc-dmic-sleep-state {
+				clk-pins {
+					pins = "gpio0";
+					function = "dmic0_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+				data-pins {
+					pins = "gpio1";
+					function = "dmic0_data";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			cdc_pdm_default: cdc-pdm-default-state {
+				pins = "gpio63", "gpio64", "gpio65", "gpio66",
+				       "gpio67", "gpio68";
+				function = "cdc_pdm0";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			cdc_pdm_sleep: cdc-pdm-sleep-state {
+				pins = "gpio63", "gpio64", "gpio65", "gpio66",
+				       "gpio67", "gpio68";
+				function = "cdc_pdm0";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			pri_mi2s_default: mi2s-pri-default-state {
+				pins = "gpio113", "gpio114", "gpio115", "gpio116";
+				function = "pri_mi2s";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			pri_mi2s_sleep: mi2s-pri-sleep-state {
+				pins = "gpio113", "gpio114", "gpio115", "gpio116";
+				function = "pri_mi2s";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			pri_mi2s_mclk_default: mi2s-pri-mclk-default-state {
+				pins = "gpio116";
+				function = "pri_mi2s";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			pri_mi2s_mclk_sleep: mi2s-pri-mclk-sleep-state {
+				pins = "gpio116";
+				function = "pri_mi2s";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			pri_mi2s_ws_default: mi2s-pri-ws-default-state {
+				pins = "gpio110";
+				function = "pri_mi2s_ws";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			pri_mi2s_ws_sleep: mi2s-pri-ws-sleep-state {
+				pins = "gpio110";
+				function = "pri_mi2s_ws";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			sec_mi2s_default: mi2s-sec-default-state {
+				pins = "gpio112", "gpio117", "gpio118", "gpio119";
+				function = "sec_mi2s";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			sec_mi2s_sleep: mi2s-sec-sleep-state {
+				pins = "gpio112", "gpio117", "gpio118", "gpio119";
+				function = "sec_mi2s";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			sdc1_default: sdc1-default-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+			};
+
+			sdc1_sleep: sdc1-sleep-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+
+			sdc2_default: sdc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+			};
+
+			sdc2_sleep: sdc2-sleep-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+
+			wcss_wlan_default: wcss-wlan-default-state {
+				pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44";
+				function = "wcss_wlan";
+				drive-strength = <6>;
+				bias-pull-up;
+			};
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,gcc-msm8916";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0x01800000 0x80000>;
+			clocks = <&xo_board>,
+				 <&sleep_clk>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy 0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			clock-names = "xo",
+				      "sleep_clk",
+				      "dsi0pll",
+				      "dsi0pllbyte",
+				      "ext_mclk",
+				      "ext_pri_i2s",
+				      "ext_sec_i2s";
+		};
+
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01905000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1937000 {
+			compatible = "qcom,tcsr-msm8916", "syscon";
+			reg = <0x01937000 0x30000>;
+		};
+
+		mdss: display-subsystem@1a00000 {
+			status = "disabled";
+			compatible = "qcom,mdss";
+			reg = <0x01a00000 0x1000>,
+			      <0x01ac8000 0x3000>;
+			reg-names = "mdss_phys", "vbif_phys";
+
+			power-domains = <&gcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "vsync";
+
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			mdss_mdp: display-controller@1a01000 {
+				compatible = "qcom,msm8916-mdp5", "qcom,mdp5";
+				reg = <0x01a01000 0x89000>;
+				reg-names = "mdp_phys";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_VSYNC_CLK>;
+				clock-names = "iface",
+					      "bus",
+					      "core",
+					      "vsync";
+
+				iommus = <&apps_iommu 4>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_mdp_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@1a98000 {
+				compatible = "qcom,msm8916-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0x01a98000 0x25c>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
+						  <&gcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_BYTE0_CLK>,
+					 <&gcc GCC_MDSS_PCLK0_CLK>,
+					 <&gcc GCC_MDSS_ESC0_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core";
+				phys = <&mdss_dsi0_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&mdss_mdp_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@1a98300 {
+				compatible = "qcom,dsi-phy-28nm-lp";
+				reg = <0x01a98300 0xd4>,
+				      <0x01a98500 0x280>,
+				      <0x01a98780 0x30>;
+				reg-names = "dsi_pll",
+					    "dsi_phy",
+					    "dsi_phy_regulator";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&xo_board>;
+				clock-names = "iface", "ref";
+			};
+		};
+
+		camss: camss@1b0ac00 {
+			compatible = "qcom,msm8916-camss";
+			reg = <0x01b0ac00 0x200>,
+				<0x01b00030 0x4>,
+				<0x01b0b000 0x200>,
+				<0x01b00038 0x4>,
+				<0x01b08000 0x100>,
+				<0x01b08400 0x100>,
+				<0x01b0a000 0x500>,
+				<0x01b00020 0x10>,
+				<0x01b10000 0x1000>;
+			reg-names = "csiphy0",
+				"csiphy0_clk_mux",
+				"csiphy1",
+				"csiphy1_clk_mux",
+				"csid0",
+				"csid1",
+				"ispif",
+				"csi_clk_mux",
+				"vfe0";
+			interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "csiphy0",
+				"csiphy1",
+				"csid0",
+				"csid1",
+				"ispif",
+				"vfe0";
+			power-domains = <&gcc VFE_GDSC>;
+			clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
+				<&gcc GCC_CAMSS_ISPIF_AHB_CLK>,
+				<&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
+				<&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
+				<&gcc GCC_CAMSS_CSI0_AHB_CLK>,
+				<&gcc GCC_CAMSS_CSI0_CLK>,
+				<&gcc GCC_CAMSS_CSI0PHY_CLK>,
+				<&gcc GCC_CAMSS_CSI0PIX_CLK>,
+				<&gcc GCC_CAMSS_CSI0RDI_CLK>,
+				<&gcc GCC_CAMSS_CSI1_AHB_CLK>,
+				<&gcc GCC_CAMSS_CSI1_CLK>,
+				<&gcc GCC_CAMSS_CSI1PHY_CLK>,
+				<&gcc GCC_CAMSS_CSI1PIX_CLK>,
+				<&gcc GCC_CAMSS_CSI1RDI_CLK>,
+				<&gcc GCC_CAMSS_AHB_CLK>,
+				<&gcc GCC_CAMSS_VFE0_CLK>,
+				<&gcc GCC_CAMSS_CSI_VFE0_CLK>,
+				<&gcc GCC_CAMSS_VFE_AHB_CLK>,
+				<&gcc GCC_CAMSS_VFE_AXI_CLK>;
+			clock-names = "top_ahb",
+				"ispif_ahb",
+				"csiphy0_timer",
+				"csiphy1_timer",
+				"csi0_ahb",
+				"csi0",
+				"csi0_phy",
+				"csi0_pix",
+				"csi0_rdi",
+				"csi1_ahb",
+				"csi1",
+				"csi1_phy",
+				"csi1_pix",
+				"csi1_rdi",
+				"ahb",
+				"vfe0",
+				"csi_vfe0",
+				"vfe_ahb",
+				"vfe_axi";
+			iommus = <&apps_iommu 3>;
+			status = "disabled";
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		cci: cci@1b0c000 {
+			compatible = "qcom,msm8916-cci", "qcom,msm8226-cci";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x01b0c000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
+				<&gcc GCC_CAMSS_CCI_AHB_CLK>,
+				<&gcc GCC_CAMSS_CCI_CLK>,
+				<&gcc GCC_CAMSS_AHB_CLK>;
+			clock-names = "camss_top_ahb", "cci_ahb",
+					  "cci", "camss_ahb";
+			assigned-clocks = <&gcc GCC_CAMSS_CCI_AHB_CLK>,
+					  <&gcc GCC_CAMSS_CCI_CLK>;
+			assigned-clock-rates = <80000000>, <19200000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&cci0_default>;
+			status = "disabled";
+
+			cci_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <400000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		gpu: gpu@1c00000 {
+			compatible = "qcom,adreno-306.0", "qcom,adreno";
+			reg = <0x01c00000 0x20000>;
+			reg-names = "kgsl_3d0_reg_memory";
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "kgsl_3d0_irq";
+			clock-names =
+			    "core",
+			    "iface",
+			    "mem",
+			    "mem_iface",
+			    "alt_mem_iface",
+			    "gfx3d";
+			clocks =
+			    <&gcc GCC_OXILI_GFX3D_CLK>,
+			    <&gcc GCC_OXILI_AHB_CLK>,
+			    <&gcc GCC_OXILI_GMEM_CLK>,
+			    <&gcc GCC_BIMC_GFX_CLK>,
+			    <&gcc GCC_BIMC_GPU_CLK>,
+			    <&gcc GFX3D_CLK_SRC>;
+			power-domains = <&gcc OXILI_GDSC>;
+			operating-points-v2 = <&gpu_opp_table>;
+			iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
+			status = "disabled";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-400000000 {
+					opp-hz = /bits/ 64 <400000000>;
+				};
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
+				};
+			};
+		};
+
+		venus: video-codec@1d00000 {
+			compatible = "qcom,msm8916-venus";
+			reg = <0x01d00000 0xff000>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&gcc VENUS_GDSC>;
+			clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>,
+				 <&gcc GCC_VENUS0_AHB_CLK>,
+				 <&gcc GCC_VENUS0_AXI_CLK>;
+			clock-names = "core", "iface", "bus";
+			iommus = <&apps_iommu 5>;
+			memory-region = <&venus_mem>;
+			status = "disabled";
+
+			video-decoder {
+				compatible = "venus-decoder";
+			};
+
+			video-encoder {
+				compatible = "venus-encoder";
+			};
+		};
+
+		apps_iommu: iommu@1ef0000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#iommu-cells = <1>;
+			compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
+			ranges = <0 0x01e20000 0x20000>;
+			reg = <0x01ef0000 0x3000>;
+			clocks = <&gcc GCC_SMMU_CFG_CLK>,
+				 <&gcc GCC_APSS_TCU_CLK>;
+			clock-names = "iface", "bus";
+			qcom,iommu-secure-id = <17>;
+
+			/* VFE */
+			iommu-ctx@3000 {
+				compatible = "qcom,msm-iommu-v1-sec";
+				reg = <0x3000 0x1000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* MDP_0 */
+			iommu-ctx@4000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x4000 0x1000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* VENUS_NS */
+			iommu-ctx@5000 {
+				compatible = "qcom,msm-iommu-v1-sec";
+				reg = <0x5000 0x1000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpu_iommu: iommu@1f08000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#iommu-cells = <1>;
+			compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
+			ranges = <0 0x01f08000 0x10000>;
+			clocks = <&gcc GCC_SMMU_CFG_CLK>,
+				 <&gcc GCC_GFX_TCU_CLK>;
+			clock-names = "iface", "bus";
+			qcom,iommu-secure-id = <18>;
+
+			/* GFX3D_USER */
+			iommu-ctx@1000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x1000 0x1000>;
+				interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* GFX3D_PRIV */
+			iommu-ctx@2000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x2000 0x1000>;
+				interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		spmi_bus: spmi@200f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0200f000 0x001000>,
+			      <0x02400000 0x400000>,
+			      <0x02c00000 0x400000>,
+			      <0x03800000 0x200000>,
+			      <0x0200a000 0x002100>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		bam_dmux_dma: dma-controller@4044000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x04044000 0x19000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+
+			num-channels = <6>;
+			qcom,num-ees = <1>;
+			qcom,powered-remotely;
+
+			status = "disabled";
+		};
+
+		mpss: remoteproc@4080000 {
+			compatible = "qcom,msm8916-mss-pil";
+			reg = <0x04080000 0x100>,
+			      <0x04020000 0x040>;
+
+			reg-names = "qdsp6", "rmb";
+
+			interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
+					      <&hexagon_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&hexagon_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&hexagon_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&hexagon_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			power-domains = <&rpmpd MSM8916_VDDCX>,
+					<&rpmpd MSM8916_VDDMX>;
+			power-domain-names = "cx", "mx";
+
+			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+				 <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "bus", "mem", "xo";
+
+			qcom,smem-states = <&hexagon_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			resets = <&scm 0>;
+			reset-names = "mss_restart";
+
+			qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
+
+			status = "disabled";
+
+			mba {
+				memory-region = <&mba_mem>;
+			};
+
+			mpss {
+				memory-region = <&mpss_mem>;
+			};
+
+			bam_dmux: bam-dmux {
+				compatible = "qcom,bam-dmux";
+
+				interrupt-parent = <&hexagon_smsm>;
+				interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>;
+				interrupt-names = "pc", "pc-ack";
+
+				qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>;
+				qcom,smem-state-names = "pc", "pc-ack";
+
+				dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>;
+				dma-names = "tx", "rx";
+
+				status = "disabled";
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,smd-edge = <0>;
+				qcom,ipc = <&apcs 8 12>;
+				qcom,remote-pid = <1>;
+
+				label = "hexagon";
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,smd-channels = "fastrpcsmd-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+					};
+				};
+			};
+		};
+
+		sound: sound@7702000 {
+			status = "disabled";
+			compatible = "qcom,apq8016-sbc-sndcard";
+			reg = <0x07702000 0x4>, <0x07702004 0x4>;
+			reg-names = "mic-iomux", "spkr-iomux";
+		};
+
+		lpass: audio-controller@7708000 {
+			status = "disabled";
+			compatible = "qcom,apq8016-lpass-cpu";
+
+			/*
+			 * Note: Unlike the name would suggest, the SEC_I2S_CLK
+			 * is actually only used by Tertiary MI2S while
+			 * Primary/Secondary MI2S both use the PRI_I2S_CLK.
+			 */
+			clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
+				 <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
+				 <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
+				 <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
+				 <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>,
+				 <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>,
+				 <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>;
+
+			clock-names = "ahbix-clk",
+					"mi2s-bit-clk0",
+					"mi2s-bit-clk1",
+					"mi2s-bit-clk2",
+					"mi2s-bit-clk3",
+					"pcnoc-mport-clk",
+					"pcnoc-sway-clk";
+			#sound-dai-cells = <1>;
+
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "lpass-irq-lpaif";
+			reg = <0x07708000 0x10000>;
+			reg-names = "lpass-lpaif";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		lpass_codec: audio-codec@771c000 {
+			compatible = "qcom,msm8916-wcd-digital-codec";
+			reg = <0x0771c000 0x400>;
+			clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
+				 <&gcc GCC_CODEC_DIGCODEC_CLK>;
+			clock-names = "ahbix-clk", "mclk";
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		sdhc_1: mmc@7824900 {
+			compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0x07824900 0x11c>, <0x07824000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			pinctrl-0 = <&sdc1_default>;
+			pinctrl-1 = <&sdc1_sleep>;
+			pinctrl-names = "default", "sleep";
+			mmc-ddr-1_8v;
+			bus-width = <8>;
+			non-removable;
+			status = "disabled";
+		};
+
+		sdhc_2: mmc@7864900 {
+			compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0x07864900 0x11c>, <0x07864000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			pinctrl-0 = <&sdc2_default>;
+			pinctrl-1 = <&sdc2_sleep>;
+			pinctrl-names = "default", "sleep";
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		blsp_dma: dma-controller@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x23000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		blsp_uart1: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078af000 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 0>, <&blsp_dma 1>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_uart1_default>;
+			pinctrl-1 = <&blsp_uart1_sleep>;
+			status = "disabled";
+		};
+
+		blsp_uart2: serial@78b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b0000 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 2>, <&blsp_dma 3>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_uart2_default>;
+			pinctrl-1 = <&blsp_uart2_sleep>;
+			status = "disabled";
+		};
+
+		blsp_i2c1: i2c@78b5000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b5000 0x500>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 4>, <&blsp_dma 5>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_i2c1_default>;
+			pinctrl-1 = <&blsp_i2c1_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi1: spi@78b5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b5000 0x500>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 4>, <&blsp_dma 5>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_spi1_default>;
+			pinctrl-1 = <&blsp_spi1_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c2: i2c@78b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b6000 0x500>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 6>, <&blsp_dma 7>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_i2c2_default>;
+			pinctrl-1 = <&blsp_i2c2_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi2: spi@78b6000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b6000 0x500>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 6>, <&blsp_dma 7>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_spi2_default>;
+			pinctrl-1 = <&blsp_spi2_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c3: i2c@78b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b7000 0x500>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 8>, <&blsp_dma 9>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_i2c3_default>;
+			pinctrl-1 = <&blsp_i2c3_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi3: spi@78b7000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b7000 0x500>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 8>, <&blsp_dma 9>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_spi3_default>;
+			pinctrl-1 = <&blsp_spi3_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c4: i2c@78b8000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b8000 0x500>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 10>, <&blsp_dma 11>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_i2c4_default>;
+			pinctrl-1 = <&blsp_i2c4_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi4: spi@78b8000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b8000 0x500>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 10>, <&blsp_dma 11>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_spi4_default>;
+			pinctrl-1 = <&blsp_spi4_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c5: i2c@78b9000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b9000 0x500>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 12>, <&blsp_dma 13>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_i2c5_default>;
+			pinctrl-1 = <&blsp_i2c5_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi5: spi@78b9000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b9000 0x500>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 12>, <&blsp_dma 13>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_spi5_default>;
+			pinctrl-1 = <&blsp_spi5_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c6: i2c@78ba000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078ba000 0x500>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 14>, <&blsp_dma 15>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_i2c6_default>;
+			pinctrl-1 = <&blsp_i2c6_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi6: spi@78ba000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078ba000 0x500>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 14>, <&blsp_dma 15>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_spi6_default>;
+			pinctrl-1 = <&blsp_spi6_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		usb: usb@78d9000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0x078d9000 0x200>,
+			      <0x078d9200 0x200>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
+				 <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			clock-names = "iface", "core";
+			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			assigned-clock-rates = <80000000>;
+			resets = <&gcc GCC_USB_HS_BCR>;
+			reset-names = "core";
+			phy_type = "ulpi";
+			dr_mode = "otg";
+			hnp-disable;
+			srp-disable;
+			adp-disable;
+			ahb-burst-config = <0>;
+			phy-names = "usb-phy";
+			phys = <&usb_hs_phy>;
+			status = "disabled";
+			#reset-cells = <1>;
+
+			ulpi {
+				usb_hs_phy: phy {
+					compatible = "qcom,usb-hs-phy-msm8916",
+						     "qcom,usb-hs-phy";
+					#phy-cells = <0>;
+					clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+					clock-names = "ref", "sleep";
+					resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
+					reset-names = "phy", "por";
+					qcom,init-seq = /bits/ 8 <0x0 0x44>,
+								 <0x1 0x6b>,
+								 <0x2 0x24>,
+								 <0x3 0x13>;
+				};
+			};
+		};
+
+		wcnss: remoteproc@a204000 {
+			compatible = "qcom,pronto-v2-pil", "qcom,pronto";
+			reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>;
+			reg-names = "ccu", "dxe", "pmu";
+
+			memory-region = <&wcnss_mem>;
+
+			interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+			power-domains = <&rpmpd MSM8916_VDDCX>,
+					<&rpmpd MSM8916_VDDMX>;
+			power-domain-names = "cx", "mx";
+
+			qcom,smem-states = <&wcnss_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&wcss_wlan_default>;
+
+			status = "disabled";
+
+			wcnss_iris: iris {
+				/* Separate chip, compatible is board-specific */
+				clocks = <&rpmcc RPM_SMD_RF_CLK2>;
+				clock-names = "xo";
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,ipc = <&apcs 8 17>;
+				qcom,smd-edge = <6>;
+				qcom,remote-pid = <4>;
+
+				label = "pronto";
+
+				wcnss_ctrl: wcnss {
+					compatible = "qcom,wcnss";
+					qcom,smd-channels = "WCNSS_CTRL";
+
+					qcom,mmio = <&wcnss>;
+
+					wcnss_bt: bluetooth {
+						compatible = "qcom,wcnss-bt";
+					};
+
+					wcnss_wifi: wifi {
+						compatible = "qcom,wcnss-wlan";
+
+						interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+							     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+						interrupt-names = "tx", "rx";
+
+						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+						qcom,smem-state-names = "tx-enable", "tx-rings-empty";
+					};
+				};
+			};
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x0b000000 0x1000>, <0x0b002000 0x2000>,
+			      <0x0b001000 0x1000>, <0x0b004000 0x2000>;
+			interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		apcs: mailbox@b011000 {
+			compatible = "qcom,msm8916-apcs-kpss-global", "syscon";
+			reg = <0x0b011000 0x1000>;
+			#mbox-cells = <1>;
+			clocks = <&a53pll>, <&gcc GPLL0_VOTE>;
+			clock-names = "pll", "aux";
+			#clock-cells = <0>;
+		};
+
+		a53pll: clock@b016000 {
+			compatible = "qcom,msm8916-a53pll";
+			reg = <0x0b016000 0x40>;
+			#clock-cells = <0>;
+			clocks = <&xo_board>;
+			clock-names = "xo";
+		};
+
+		timer@b020000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0b020000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@b021000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b021000 0x1000>,
+				      <0x0b022000 0x1000>;
+			};
+
+			frame@b023000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b023000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b024000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b024000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b025000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b025000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b026000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b026000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b027000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b027000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b028000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b028000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		cpu0_acc: power-manager@b088000 {
+			compatible = "qcom,msm8916-acc";
+			reg = <0x0b088000 0x1000>;
+			status = "reserved"; /* Controlled by PSCI firmware */
+		};
+
+		cpu0_saw: power-manager@b089000 {
+			compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
+			reg = <0x0b089000 0x1000>;
+			status = "reserved"; /* Controlled by PSCI firmware */
+		};
+
+		cpu1_acc: power-manager@b098000 {
+			compatible = "qcom,msm8916-acc";
+			reg = <0x0b098000 0x1000>;
+			status = "reserved"; /* Controlled by PSCI firmware */
+		};
+
+		cpu1_saw: power-manager@b099000 {
+			compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
+			reg = <0x0b099000 0x1000>;
+			status = "reserved"; /* Controlled by PSCI firmware */
+		};
+
+		cpu2_acc: power-manager@b0a8000 {
+			compatible = "qcom,msm8916-acc";
+			reg = <0x0b0a8000 0x1000>;
+			status = "reserved"; /* Controlled by PSCI firmware */
+		};
+
+		cpu2_saw: power-manager@b0a9000 {
+			compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
+			reg = <0x0b0a9000 0x1000>;
+			status = "reserved"; /* Controlled by PSCI firmware */
+		};
+
+		cpu3_acc: power-manager@b0b8000 {
+			compatible = "qcom,msm8916-acc";
+			reg = <0x0b0b8000 0x1000>;
+			status = "reserved"; /* Controlled by PSCI firmware */
+		};
+
+		cpu3_saw: power-manager@b0b9000 {
+			compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
+			reg = <0x0b0b9000 0x1000>;
+			status = "reserved"; /* Controlled by PSCI firmware */
+		};
+	};
+
+	thermal-zones {
+		cpu0-1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu0_1_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu0_1_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_1_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				cpu2_3_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu2_3_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_3_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				gpu_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				gpu_crit: gpu-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				cam_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 0>;
+
+			trips {
+				modem_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/configs/dragonboard410c_defconfig b/configs/dragonboard410c_defconfig
index efdee8a40fa3..0481ceeb6c65 100644
--- a/configs/dragonboard410c_defconfig
+++ b/configs/dragonboard410c_defconfig
@@ -9,7 +9,7 @@  CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x8007fff0
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x0
-CONFIG_DEFAULT_DEVICE_TREE="dragonboard410c"
+CONFIG_DEFAULT_DEVICE_TREE="apq8016-sbc"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_IDENT_STRING="\nQualcomm-DragonBoard 410C"
 CONFIG_SYS_LOAD_ADDR=0x80080000