From patchwork Tue Jan 30 14:05:12 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Caleb Connolly X-Patchwork-Id: 768098 Delivered-To: patch@linaro.org Received: by 2002:adf:ee41:0:b0:33a:e5bd:fedd with SMTP id w1csp1389254wro; Tue, 30 Jan 2024 06:12:23 -0800 (PST) X-Google-Smtp-Source: AGHT+IGFZ6cSfX0IsyKGmlHiROfprpmBOtgnK3jSQjhwCquKiqHr5hur0XerNIN8XLAFzvb/XHiw X-Received: by 2002:a05:600c:1d07:b0:40e:bfbf:f368 with SMTP id l7-20020a05600c1d0700b0040ebfbff368mr7878433wms.2.1706623943618; Tue, 30 Jan 2024 06:12:23 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1706623943; cv=none; d=google.com; s=arc-20160816; b=I6Wb3m/MMtONobQ8W5d8AJP9L/3MxV3j+HdeU9PJOaGVhsbCXdKZA8dNhMW7cNmoCe NsIPCS/+Q5mwJgqqt72IqAYSyTTg6mFkRErJIb1L6bJnjzTEyYU8OvEeJOIbM84AhAG6 Zs9xEaBbPWak9CcO1nLMf983Co7IYHD2taQwMx5g/XyKCgEkyVggk+r7Si8R7O4W+3aw OAy8qER8El9xnBqPqzCtwZrJX/ONMYqB0UhC3OxsYqaS2GUp4g5GptD9023iwbNJ9/z4 07XKHT6rX1TVRIMmziN++BlgHQ6Kkm03NhkhOTL+rHfJ8kHj9fzR6/j3WJcy35wa7m7H 6sXg== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=sender:errors-to:list-subscribe:list-help:list-post:list-archive :list-unsubscribe:list-id:precedence:cc:to:in-reply-to:references :message-id:content-transfer-encoding:mime-version:subject:date:from :dkim-signature; bh=6jrhWs+hsHLaP/uwBWO0GVMS+OEmYNwRUOyysgsciW8=; fh=GB9E9KzRIiNXhkRWIZbZpSMjbCjxnqnvE8nYuQxq8UI=; b=IDHO8asL/yfQN8Oa9xtSi4taRPu1Qj0/NA4VR5gMzwTBUZ5NK9GOkPyjsFmemmNxMu gShWytYcHkqnyi/7uKfCo00h+F8+FTAHaE4O0ukvVGiE0JfaC3mGQ2OkMdE2bT328A3Q 3lC3w4EAnv3JzuuphZBeXIUE/DdX8eBTZARFL6+LzVgkpa3+2vlREjUOxZMTh1e7g/YQ CpzWcKkrs57M38UBDtEZV1Rhr4vbylPJiCa+0u3AmYFlWFkOGhRzSg63w4iPsVjIn1SE HqAZf9FEEy/v/fPZeG79jzYa6mk1P4rb81oe4qO/36vhdKf3Xmt9G1ck5tG8j49bcqi8 UGxQ== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=IgyCRvvy; spf=pass (google.com: domain of u-boot-bounces@lists.denx.de designates 2a01:238:438b:c500:173d:9f52:ddab:ee01 as permitted sender) smtp.mailfrom=u-boot-bounces@lists.denx.de; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from phobos.denx.de (phobos.denx.de. [2a01:238:438b:c500:173d:9f52:ddab:ee01]) by mx.google.com with ESMTPS id fc8-20020a05600c524800b0040fafd8408bsi250317wmb.144.2024.01.30.06.12.22 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 30 Jan 2024 06:12:23 -0800 (PST) Received-SPF: pass (google.com: domain of u-boot-bounces@lists.denx.de designates 2a01:238:438b:c500:173d:9f52:ddab:ee01 as permitted sender) client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=IgyCRvvy; spf=pass (google.com: domain of u-boot-bounces@lists.denx.de designates 2a01:238:438b:c500:173d:9f52:ddab:ee01 as permitted sender) smtp.mailfrom=u-boot-bounces@lists.denx.de; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id EB1B787E86; Tue, 30 Jan 2024 15:10:22 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=pass (2048-bit key; unprotected) header.d=linaro.org header.i=@linaro.org header.b="IgyCRvvy"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id DA39D87E7E; Tue, 30 Jan 2024 15:05:53 +0100 (CET) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_NONE,SPF_PASS, T_SCC_BODY_TEXT_LINE autolearn=ham autolearn_force=no version=3.4.2 Received: from mail-lf1-x136.google.com (mail-lf1-x136.google.com [IPv6:2a00:1450:4864:20::136]) (using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 9D31087E2F for ; Tue, 30 Jan 2024 15:05:36 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=caleb.connolly@linaro.org Received: by mail-lf1-x136.google.com with SMTP id 2adb3069b0e04-5101cd91017so4379127e87.2 for ; Tue, 30 Jan 2024 06:05:36 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1706623536; x=1707228336; darn=lists.denx.de; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=6jrhWs+hsHLaP/uwBWO0GVMS+OEmYNwRUOyysgsciW8=; b=IgyCRvvywppZ3EjTNPQDH8HPeUxiJoM540FnQG97mpqVfNJYCveC/f40b4DMa8U4WE wGLHE9rEYSjfCnyu9vX0IJoj4R/kvb8Ytmtc2OcSqJR1CB+VBLCuEnCi3ifitVrBMedw dJQTcJDl4H2Mbxg5ODRWmMYk3TySTXTwPuufzSXTRxudooHvG3UOZbL5ZtZS85v4+OZ2 MA24ephMR5G/QzQkCxQ0yVAqHyGGcMHXid4ie8cVs1HBpfhqfWtkFXepmZR+bXnVXh7y +J6q/r+aCX1SfXq5aYdkUfOA1Q/isiNMo9kdB5WsHZSuk2/6rwkPlg87S0QUehYdtUbD FvBQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1706623536; x=1707228336; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=6jrhWs+hsHLaP/uwBWO0GVMS+OEmYNwRUOyysgsciW8=; b=upAOYh3OLOwfk/jrDhDXOKHn87QGxY2uBkDkqwgUd+pN0RnP7pK2oeLa1YKqF7xnX/ Gge5lEQwFDFZi450r98ukxy3xl9L/qLTHrkylMh4oRLVAgMe5Kk6dEhD93UOTcK6jc4N SQdQJoxMhQUX0vsVgbWvZcWqrmy6zdAcaBs4zMAlMS/zcLU8g7LTsAe0E2wsB2DnN29B yOxpvRp+U3Kgb7LWdgONiIBaT0RUaBhlmuEGb6+/8jF/NkCgiQy43ZH5J90Z3F9IgPXP vef3GUHMsNjh3nPLQ6+jqPlO3qe4ko73FInyNXzpgelrHHtp7DE8HISy3vB+ufKI4T9O QISA== X-Gm-Message-State: AOJu0YxIHPzwwES3y895jIxog6nTC3vhUUc7yUy8IJgGZVnc8Bm7YCf0 1tlqGLJVR3rppH82qys6XiqWEOKEBijBAAPoSLJH85g62xqpZjn3Zk2Ubk3Cido= X-Received: by 2002:a05:6512:74c:b0:511:18e4:df90 with SMTP id c12-20020a056512074c00b0051118e4df90mr1481133lfs.1.1706623535053; Tue, 30 Jan 2024 06:05:35 -0800 (PST) Received: from lion.localdomain (host-92-17-96-232.as13285.net. [92.17.96.232]) by smtp.gmail.com with ESMTPSA id g11-20020a05600c310b00b0040f035bebfcsm1799017wmo.12.2024.01.30.06.05.33 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 30 Jan 2024 06:05:34 -0800 (PST) From: Caleb Connolly Date: Tue, 30 Jan 2024 14:05:12 +0000 Subject: [PATCH v3 24/36] dts: sdm845: replace with upstream DTS MIME-Version: 1.0 Message-Id: <20240130-b4-qcom-common-target-v3-24-e523cbf9e556@linaro.org> References: <20240130-b4-qcom-common-target-v3-0-e523cbf9e556@linaro.org> In-Reply-To: <20240130-b4-qcom-common-target-v3-0-e523cbf9e556@linaro.org> To: Neil Armstrong , Sumit Garg , Ramon Fried , Dzmitry Sankouski , Caleb Connolly , Peng Fan , Jaehoon Chung , Rayagonda Kokatanur , Lukasz Majewski , Sean Anderson , Jorge Ramirez-Ortiz , Stephan Gerhold Cc: Marek Vasut , u-boot@lists.denx.de X-Mailer: b4 0.13-dev-4bd13 X-Developer-Signature: v=1; a=openpgp-sha256; l=204293; i=caleb.connolly@linaro.org; h=from:subject:message-id; bh=BcT98NKBs9nl6x680M2bFy8w2BUu6tuMzaggCE0WRog=; b=owGbwMvMwCFYaeA6f6eBkTjjabUkhtSdTEJuokcY7LZ9L3/2/cuidxcuHwg2apR7JcEguGTW7 Ed71d/96ShlYRDkYJAVU2QRP7HMsmntZXuN7QsuwMxhZQIZwsDFKQAT8TvA8L9y8f19hZwLIlXb f1h8lcs7FSpz7NiyjvhmtXnBkv9SJO0Z/sf7C9nn1IssWj7vjPSu6wLCyi0L9x2/+tVlyU393T+ 5Ip8BAA== X-Developer-Key: i=caleb.connolly@linaro.org; a=openpgp; fpr=83B24DA7FE145076BC38BB250CD904EB673A7C47 X-Mailman-Approved-At: Tue, 30 Jan 2024 15:10:21 +0100 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de X-Virus-Status: Clean Import sdm845.dtsi from upstream, as well as the upstream DTS files for the db845c and Samsung starqltechn. Delete the old board files. Taken from kernel tag v6.7 Reviewed-by: Neil Armstrong Signed-off-by: Caleb Connolly --- arch/arm/dts/Makefile | 4 +- arch/arm/dts/dragonboard845c-uboot.dtsi | 26 - arch/arm/dts/dragonboard845c.dts | 48 - arch/arm/dts/sdm845-db845c.dts | 1190 ++++ .../arm/dts/sdm845-samsung-starqltechn-u-boot.dtsi | 16 + arch/arm/dts/sdm845-samsung-starqltechn.dts | 460 ++ arch/arm/dts/sdm845.dtsi | 5801 +++++++++++++++++++- arch/arm/dts/starqltechn-uboot.dtsi | 27 - arch/arm/dts/starqltechn.dts | 68 - configs/qcom_defconfig | 2 +- 10 files changed, 7386 insertions(+), 256 deletions(-) diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index b058def774d4..92a4465f5f41 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -630,8 +630,8 @@ dtb-$(CONFIG_TARGET_TEN64) += fsl-ls1088a-ten64.dtb dtb-$(CONFIG_ARCH_SNAPDRAGON) += dragonboard410c.dtb \ dragonboard820c.dtb \ - dragonboard845c.dtb \ - starqltechn.dtb \ + sdm845-db845c.dtb \ + sdm845-samsung-starqltechn.dtb \ qcs404-evb.dtb dtb-$(CONFIG_TARGET_STEMMY) += ste-ux500-samsung-stemmy.dtb diff --git a/arch/arm/dts/dragonboard845c-uboot.dtsi b/arch/arm/dts/dragonboard845c-uboot.dtsi deleted file mode 100644 index 775f45c0149f..000000000000 --- a/arch/arm/dts/dragonboard845c-uboot.dtsi +++ /dev/null @@ -1,26 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * U-Boot addition to handle Qualcomm Robotics RB3 Development Platform - * (dragonboard845c) pins - * - * (C) Copyright 2022 Sumit Garg - */ - -/ -{ - soc { - bootph-all; - - serial@a84000 { - bootph-all; - }; - - clock-controller@100000 { - bootph-all; - }; - - pinctrl@3400000 { - bootph-all; - }; - }; -}; diff --git a/arch/arm/dts/dragonboard845c.dts b/arch/arm/dts/dragonboard845c.dts deleted file mode 100644 index 054f253eb32a..000000000000 --- a/arch/arm/dts/dragonboard845c.dts +++ /dev/null @@ -1,48 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Qualcomm Robotics RB3 Development (dragonboard845c) board device - * tree source - * - * (C) Copyright 2022 Sumit Garg - */ - -/dts-v1/; - -#include "sdm845.dtsi" - -/ { - model = "Thundercomm Dragonboard 845c"; - compatible = "thundercomm,db845c", "qcom,sdm845"; - #address-cells = <2>; - #size-cells = <2>; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - aliases { - serial0 = &uart9; - }; - - memory { - device_type = "memory"; - reg = <0 0x80000000 0 0xfdfa0000>; - }; - - psci { - compatible = "arm,psci-1.0"; - method = "smc"; - }; - - soc: soc { - serial@a84000 { - status = "okay"; - }; - }; -}; - -&pm8998_resin { - status = "okay"; -}; - -#include "dragonboard845c-uboot.dtsi" diff --git a/arch/arm/dts/sdm845-db845c.dts b/arch/arm/dts/sdm845-db845c.dts new file mode 100644 index 000000000000..c7eba6c491be --- /dev/null +++ b/arch/arm/dts/sdm845-db845c.dts @@ -0,0 +1,1190 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019, Linaro Ltd. + */ + +/dts-v1/; + +#include +#include +#include +#include +#include +#include "sdm845.dtsi" +#include "sdm845-wcd9340.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" + +/ { + model = "Thundercomm Dragonboard 845c"; + compatible = "thundercomm,db845c", "qcom,sdm845"; + qcom,msm-id = <341 0x20001>; + qcom,board-id = <8 0>; + + aliases { + serial0 = &uart9; + serial1 = &uart6; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + /* Fixed crystal oscillator dedicated to MCP2517FD */ + clk40M: can-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <40000000>; + }; + + dc12v: dc12v-regulator { + compatible = "regulator-fixed"; + regulator-name = "DC12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&vol_up_pin_a>; + + key-vol-up { + label = "Volume Up"; + linux,code = ; + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + label = "green:user4"; + function = LED_FUNCTION_INDICATOR; + color = ; + gpios = <&pm8998_gpios 13 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "panic-indicator"; + default-state = "off"; + }; + + led-1 { + label = "yellow:wlan"; + function = LED_FUNCTION_WLAN; + color = ; + gpios = <&pm8998_gpios 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + led-2 { + label = "blue:bt"; + function = LED_FUNCTION_BLUETOOTH; + color = ; + gpios = <&pm8998_gpios 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + default-state = "off"; + }; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <<9611_out>; + }; + }; + }; + + reserved-memory { + /* Cont splash region set up by the bootloader */ + cont_splash_mem: framebuffer@9d400000 { + reg = <0x0 0x9d400000 0x0 0x2400000>; + no-map; + }; + }; + + lt9611_1v8: lt9611-vdd18-regulator { + compatible = "regulator-fixed"; + regulator-name = "LT9611_1V8"; + + vin-supply = <&vdc_5v>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + lt9611_3v3: lt9611-3v3 { + compatible = "regulator-fixed"; + regulator-name = "LT9611_3V3"; + + vin-supply = <&vdc_3v3>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + /* + * TODO: make it possible to drive same GPIO from two clients + * gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>; + * enable-active-high; + */ + }; + + pcie0_1p05v: pcie-0-1p05v-regulator { + compatible = "regulator-fixed"; + regulator-name = "PCIE0_1.05V"; + + vin-supply = <&vbat>; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + + /* + * TODO: make it possible to drive same GPIO from two clients + * gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>; + * enable-active-high; + */ + }; + + cam0_dvdd_1v2: cam0-dvdd-1v2-regulator { + compatible = "regulator-fixed"; + regulator-name = "CAM0_DVDD_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + enable-active-high; + gpio = <&pm8998_gpios 12 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cam0_dvdd_1v2_en_default>; + vin-supply = <&vbat>; + }; + + cam0_avdd_2v8: cam0-avdd-2v8-regulator { + compatible = "regulator-fixed"; + regulator-name = "CAM0_AVDD_2V8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + enable-active-high; + gpio = <&pm8998_gpios 10 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cam0_avdd_2v8_en_default>; + vin-supply = <&vbat>; + }; + + /* This regulator is enabled when the VREG_LVS1A_1P8 trace is enabled */ + cam3_avdd_2v8: cam3-avdd-2v8-regulator { + compatible = "regulator-fixed"; + regulator-name = "CAM3_AVDD_2V8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + vin-supply = <&vbat>; + }; + + pcie0_3p3v_dual: vldo-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "VLDO_3V3"; + + vin-supply = <&vbat>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_pwren_state>; + }; + + v5p0_hdmiout: v5p0-hdmiout-regulator { + compatible = "regulator-fixed"; + regulator-name = "V5P0_HDMIOUT"; + + vin-supply = <&vdc_5v>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <500000>; + + /* + * TODO: make it possible to drive same GPIO from two clients + * gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>; + * enable-active-high; + */ + }; + + vbat: vbat-regulator { + compatible = "regulator-fixed"; + regulator-name = "VBAT"; + + vin-supply = <&dc12v>; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + regulator-always-on; + }; + + vbat_som: vbat-som-regulator { + compatible = "regulator-fixed"; + regulator-name = "VBAT_SOM"; + + vin-supply = <&dc12v>; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + regulator-always-on; + }; + + vdc_3v3: vdc-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "VDC_3V3"; + vin-supply = <&dc12v>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdc_5v: vdc-5v-regulator { + compatible = "regulator-fixed"; + regulator-name = "VDC_5V"; + + vin-supply = <&dc12v>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <500000>; + regulator-always-on; + }; + + vreg_s4a_1p8: vreg-s4a-1p8 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + + vin-supply = <&vbat_som>; + }; +}; + +&adsp_pas { + status = "okay"; + + firmware-name = "qcom/sdm845/adsp.mbn"; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + vdd-s13-supply = <&vph_pwr>; + vdd-l1-l27-supply = <&vreg_s7a_1p025>; + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; + vdd-l3-l11-supply = <&vreg_s7a_1p025>; + vdd-l4-l5-supply = <&vreg_s7a_1p025>; + vdd-l6-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + vdd-l9-supply = <&vreg_bob>; + vdd-l10-l23-l25-supply = <&vreg_bob>; + vdd-l13-l19-l21-supply = <&vreg_bob>; + vdd-l16-l28-supply = <&vreg_bob>; + vdd-l18-l22-supply = <&vreg_bob>; + vdd-l20-l24-supply = <&vreg_bob>; + vdd-l26-supply = <&vreg_s3a_1p35>; + vin-lvs-1-2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: smps7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l13a_2p95: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2968000>; + regulator-initial-mode = ; + }; + + vreg_l21a_2p95: ldo21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2968000>; + regulator-initial-mode = ; + }; + + vreg_l24a_3p075: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = ; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; + + regulators-1 { + compatible = "qcom,pmi8998-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + regulator-initial-mode = ; + regulator-allow-bypass; + }; + }; +}; + +&camss { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l26a_1p2>; +}; + +&cdsp_pas { + status = "okay"; + firmware-name = "qcom/sdm845/cdsp.mbn"; +}; + +&gcc { + protected-clocks = , + , + , + , + ; +}; + +&gmu { + status = "okay"; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpu { + status = "okay"; + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sdm845/a630_zap.mbn"; + }; +}; + +&i2c10 { + status = "okay"; + clock-frequency = <400000>; + + lt9611_codec: hdmi-bridge@3b { + compatible = "lontium,lt9611"; + reg = <0x3b>; + #sound-dai-cells = <1>; + + interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>; + + vdd-supply = <<9611_1v8>; + vcc-supply = <<9611_3v3>; + + pinctrl-names = "default"; + pinctrl-0 = <<9611_irq_pin>, <&dsi_sw_sel>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lt9611_a: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + + lt9611_b: endpoint { + remote-endpoint = <&mdss_dsi1_out>; + }; + }; + + port@2 { + reg = <2>; + + lt9611_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&i2c11 { + /* On Low speed expansion */ + clock-frequency = <100000>; + status = "okay"; +}; + +&i2c14 { + /* On Low speed expansion */ + clock-frequency = <100000>; + status = "okay"; +}; + +&mdss { + memory-region = <&cont_splash_mem>; + status = "okay"; +}; + +&mdss_dsi0 { + status = "okay"; + vdda-supply = <&vreg_l26a_1p2>; + + qcom,dual-dsi-mode; + qcom,master-dsi; + + ports { + port@1 { + endpoint { + remote-endpoint = <<9611_a>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&mdss_dsi0_phy { + status = "okay"; + vdds-supply = <&vreg_l1a_0p875>; +}; + +&mdss_dsi1 { + vdda-supply = <&vreg_l26a_1p2>; + + qcom,dual-dsi-mode; + + /* DSI1 is slave, so use DSI0 clocks */ + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + + status = "okay"; + + ports { + port@1 { + endpoint { + remote-endpoint = <<9611_b>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&mdss_dsi1_phy { + vdds-supply = <&vreg_l1a_0p875>; + status = "okay"; +}; + +&mss_pil { + status = "okay"; + firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn"; +}; + +&pcie0 { + status = "okay"; + perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; + enable-gpio = <&tlmm 134 GPIO_ACTIVE_HIGH>; + + vddpe-3v3-supply = <&pcie0_3p3v_dual>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_state>; +}; + +&pcie0_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l26a_1p2>; +}; + +&pcie1 { + status = "okay"; + perst-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_state>; +}; + +&pcie1_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l26a_1p2>; +}; + +&pm8998_gpios { + gpio-line-names = + "NC", + "NC", + "WLAN_SW_CTRL", + "NC", + "PM_GPIO5_BLUE_BT_LED", + "VOL_UP_N", + "NC", + "ADC_IN1", + "PM_GPIO9_YEL_WIFI_LED", + "CAM0_AVDD_EN", + "NC", + "CAM0_DVDD_EN", + "PM_GPIO13_GREEN_U4_LED", + "DIV_CLK2", + "NC", + "NC", + "NC", + "SMB_STAT", + "NC", + "NC", + "ADC_IN2", + "OPTION1", + "WCSS_PWR_REQ", + "PM845_GPIO24", + "OPTION2", + "PM845_SLB"; + + cam0_dvdd_1v2_en_default: cam0-dvdd-1v2-en-state { + pins = "gpio12"; + function = "normal"; + + bias-pull-up; + drive-push-pull; + qcom,drive-strength = ; + }; + + cam0_avdd_2v8_en_default: cam0-avdd-2v8-en-state { + pins = "gpio10"; + function = "normal"; + + bias-pull-up; + drive-push-pull; + qcom,drive-strength = ; + }; + + vol_up_pin_a: vol-up-active-state { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,drive-strength = ; + }; +}; + +&pm8998_resin { + linux,code = ; + status = "okay"; +}; + +&pmi8998_lpg { + status = "okay"; + + qcom,power-source = <1>; + + led@3 { + reg = <3>; + color = ; + function = LED_FUNCTION_HEARTBEAT; + function-enumerator = <3>; + + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + + led@4 { + reg = <4>; + color = ; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; + }; + + led@5 { + reg = <5>; + color = ; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; + }; +}; + +/* QUAT I2S Uses 4 I2S SD Lines for audio on LT9611 HDMI Bridge */ +&q6afedai { + dai@22 { + reg = ; + qcom,sd-lines = <0 1 2 3>; + }; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; + + dai@3 { + reg = <3>; + direction = <2>; + is-compress-dai; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + + bus-width = <4>; + cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>; +}; + +&sound { + compatible = "qcom,db845c-sndcard", "qcom,sdm845-sndcard"; + pinctrl-0 = <&quat_mi2s_active + &quat_mi2s_sd0_active + &quat_mi2s_sd1_active + &quat_mi2s_sd2_active + &quat_mi2s_sd3_active>; + pinctrl-names = "default"; + model = "DB845c"; + audio-routing = + "RX_BIAS", "MCLK", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "DMIC0", "MIC BIAS1", + "DMIC1", "MIC BIAS1", + "DMIC2", "MIC BIAS3", + "DMIC3", "MIC BIAS3", + "SpkrLeft IN", "SPK1 OUT", + "SpkrRight IN", "SPK2 OUT", + "MM_DL1", "MultiMedia1 Playback", + "MM_DL2", "MultiMedia2 Playback", + "MM_DL4", "MultiMedia4 Playback", + "MultiMedia3 Capture", "MM_UL3"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + mm4-dai-link { + link-name = "MultiMedia4"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>; + }; + }; + + hdmi-dai-link { + link-name = "HDMI Playback"; + cpu { + sound-dai = <&q6afedai QUATERNARY_MI2S_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <<9611_codec 0>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9340 1>; + }; + }; +}; + +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_default>; + cs-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>; + + can@0 { + compatible = "microchip,mcp2517fd"; + reg = <0>; + clocks = <&clk40M>; + interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; + spi-max-frequency = <10000000>; + vdd-supply = <&vdc_5v>; + xceiver-supply = <&vdc_5v>; + }; +}; + +&spi2 { + /* On Low speed expansion */ + status = "okay"; +}; + +&tlmm { + cam0_default: cam0-default-state { + rst-pins { + pins = "gpio9"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + }; + + mclk0-pins { + pins = "gpio13"; + function = "cam_mclk"; + + drive-strength = <16>; + bias-disable; + }; + }; + + cam3_default: cam3-default-state { + rst-pins { + function = "gpio"; + pins = "gpio21"; + + drive-strength = <16>; + bias-disable; + }; + + mclk3-pins { + function = "cam_mclk"; + pins = "gpio16"; + + drive-strength = <16>; + bias-disable; + }; + }; + + dsi_sw_sel: dsi-sw-sel-state { + pins = "gpio120"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + output-high; + }; + + lt9611_irq_pin: lt9611-irq-state { + pins = "gpio84"; + function = "gpio"; + bias-disable; + }; + + pcie0_default_state: pcie0-default-state { + clkreq-pins { + pins = "gpio36"; + function = "pci_e0"; + bias-pull-up; + }; + + reset-n-pins { + pins = "gpio35"; + function = "gpio"; + + drive-strength = <2>; + output-low; + bias-pull-down; + }; + + wake-n-pins { + pins = "gpio37"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie0_pwren_state: pcie0-pwren-state { + pins = "gpio90"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + pcie1_default_state: pcie1-default-state { + perst-n-pins { + pins = "gpio102"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + }; + + clkreq-pins { + pins = "gpio103"; + function = "pci_e1"; + bias-pull-up; + }; + + wake-n-pins { + pins = "gpio11"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + reset-n-pins { + pins = "gpio75"; + function = "gpio"; + + drive-strength = <16>; + bias-pull-up; + output-high; + }; + }; + + sdc2_default_state: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + + /* + * It seems that mmc_test reports errors if drive + * strength is not 16 on clk, cmd, and data pins. + */ + drive-strength = <16>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + + sdc2_card_det_n: sd-card-det-n-state { + pins = "gpio126"; + function = "gpio"; + bias-pull-up; + }; +}; + +&uart3 { + label = "LS-UART0"; + pinctrl-0 = <&qup_uart3_4pin>; + + status = "disabled"; +}; + +&uart6 { + status = "okay"; + + pinctrl-0 = <&qup_uart6_4pin>; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + +&uart9 { + label = "LS-UART1"; + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = ; + qcom,preemphasis-level = ; + qcom,preemphasis-width = ; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l26a_1p2>; + vdda-pll-supply = <&vreg_l1a_0p875>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdd-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = ; +}; + +&usb_2_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l26a_1p2>; + vdda-pll-supply = <&vreg_l1a_0p875>; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <800000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l26a_1p2>; +}; + +&venus { + status = "okay"; +}; + +&wcd9340 { + reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; + + swm: swm@c85 { + left_spkr: speaker@0,1 { + compatible = "sdw10217201000"; + reg = <0 1>; + powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrLeft"; + #sound-dai-cells = <0>; + }; + + right_spkr: speaker@0,2 { + compatible = "sdw10217201000"; + powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>; + reg = <0 2>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrRight"; + #sound-dai-cells = <0>; + }; + }; +}; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + + qcom,snoc-host-cap-8bit-quirk; + qcom,ath10k-calibration-variant = "Thundercomm_DB845C"; +}; + +/* PINCTRL - additions to nodes defined in sdm845.dtsi */ +&qup_spi2_default { + drive-strength = <16>; +}; + +&qup_i2c10_default { + drive-strength = <2>; + bias-disable; +}; + +&qup_uart9_rx { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_uart9_tx { + drive-strength = <2>; + bias-disable; +}; + +/* PINCTRL - additions to nodes defined in sdm845.dtsi */ +&qup_spi0_default { + drive-strength = <6>; + bias-disable; +}; diff --git a/arch/arm/dts/sdm845-samsung-starqltechn-u-boot.dtsi b/arch/arm/dts/sdm845-samsung-starqltechn-u-boot.dtsi new file mode 100644 index 000000000000..c78bd6e92406 --- /dev/null +++ b/arch/arm/dts/sdm845-samsung-starqltechn-u-boot.dtsi @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + chosen { + stdout-path = "serial0:921600n8"; + }; +}; + +&tlmm { + muic-i2c-n { + pins = "gpio33", "gpio34"; + drive-strength = <0x2>; + function = "gpio"; + bias-disable; + }; +}; diff --git a/arch/arm/dts/sdm845-samsung-starqltechn.dts b/arch/arm/dts/sdm845-samsung-starqltechn.dts new file mode 100644 index 000000000000..d37a433130b9 --- /dev/null +++ b/arch/arm/dts/sdm845-samsung-starqltechn.dts @@ -0,0 +1,460 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 Samsung S9 (SM-G9600) (starqltechn / star2qltechn) common device tree source + * + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include +#include +#include "sdm845.dtsi" + +/ { + chassis-type = "handset"; + model = "Samsung Galaxy S9 SM-G9600"; + compatible = "samsung,starqltechn", "qcom,sdm845"; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + framebuffer: framebuffer@9d400000 { + compatible = "simple-framebuffer"; + reg = <0 0x9d400000 0 (2960 * 1440 * 4)>;//2400000 + width = <1440>; + height = <2960>; + stride = <(1440 * 4)>; + format = "a8r8g8b8"; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + /* + * Apparently RPMh does not provide support for PM8998 S4 because it + * is always-on; model it as a fixed regulator. + */ + vreg_s4a_1p8: pm8998-smps4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; + + reserved-memory { + memory@9d400000 { + reg = <0x0 0x9d400000 0x0 0x02400000>; + no-map; + }; + + memory@a1300000 { + compatible = "ramoops"; + reg = <0x0 0xa1300000 0x0 0x100000>; + record-size = <0x40000>; + console-size = <0x40000>; + ftrace-size = <0x40000>; + pmsg-size = <0x40000>; + }; + }; +}; + + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + vdd-s13-supply = <&vph_pwr>; + vdd-l1-l27-supply = <&vreg_s7a_1p025>; + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; + vdd-l3-l11-supply = <&vreg_s7a_1p025>; + vdd-l4-l5-supply = <&vreg_s7a_1p025>; + vdd-l6-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + vdd-l26-supply = <&vreg_s3a_1p35>; + vin-lvs-1-2-supply = <&vreg_s4a_1p8>; + + vreg_s2a_1p125: smps2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: smps7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vdd_qusb_hs0: + vdda_hp_pcie_core: + vdda_mipi_csi0_0p9: + vdda_mipi_csi1_0p9: + vdda_mipi_csi2_0p9: + vdda_mipi_dsi0_pll: + vdda_mipi_dsi1_pll: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vdda_qrefs_0p875: + vdda_pcie_core: + vdda_pll_cc_ebi01: + vdda_pll_cc_ebi23: + vdda_sp_sensor: + vdda_ufs1_core: + vdda_ufs2_core: + vdda_usb1_ss_core: + vdda_usb2_ss_core: + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vddpx_10: + vreg_l2a_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-always-on; + }; + + vreg_l3a_1p0: ldo3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = ; + }; + + vdd_wcss_cx: + vdd_wcss_mx: + vdda_wcss_pll: + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + }; + + vddpx_13: + vreg_l6a_1p8: ldo6 { + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <1856000>; + regulator-initial-mode = ; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l8a_1p2: ldo8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1248000>; + regulator-initial-mode = ; + }; + + vreg_l9a_1p8: ldo9 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + }; + + vreg_l10a_1p8: ldo10 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + }; + + vreg_l11a_1p0: ldo11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1048000>; + regulator-initial-mode = ; + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_apc1_cs_1p8: + vdda_gfx_cs_1p8: + vdda_qrefs_1p8: + vdda_qusb_hs0_1p8: + vddpx_11: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vddpx_2: + vreg_l13a_2p95: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l14a_1p88: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l15a_1p8: ldo15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + regulator-initial-mode = ; + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vreg_l18a_2p7: ldo18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l19a_3p0: ldo19 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = ; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l21a_2p95: ldo21 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l22a_2p85: ldo22 { + regulator-min-microvolt = <2864000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vreg_l23a_3p3: ldo23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vdda_qusb_hs0_3p1: + vreg_l24a_3p075: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = ; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vdda_hp_pcie_1p2: + vdda_hv_ebi0: + vdda_hv_ebi1: + vdda_hv_ebi2: + vdda_hv_ebi3: + vdda_mipi_csi_1p25: + vdda_mipi_dsi0_1p2: + vdda_mipi_dsi1_1p2: + vdda_pcie_1p2: + vdda_ufs1_1p2: + vdda_ufs2_1p2: + vdda_usb1_ss_1p2: + vdda_usb2_ss_1p2: + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l28a_3p0: ldo28 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8005-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s3c_0p6: smps3 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + }; + }; +}; + +&gcc { + protected-clocks = , + , + , + , + ; +}; + +&i2c10 { + clock-frequency = <400000>; + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&uart9 { + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <600000>; + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vdda_ufs1_core>; + vdda-pll-supply = <&vdda_ufs1_1p2>; + status = "okay"; +}; + +&sdhc_2 { + pinctrl-names = "default"; + pinctrl-0 = <&sdc2_clk_state &sdc2_cmd_state &sdc2_data_state &sd_card_det_n_state>; + cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vddpx_2>; + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + /* Until we have Type C hooked up we'll force this as peripheral. */ + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + vdd-supply = <&vdda_usb1_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = ; + qcom,preemphasis-level = ; + qcom,preemphasis-width = ; + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vdda_usb1_ss_1p2>; + vdda-pll-supply = <&vdda_usb1_ss_core>; + status = "okay"; +}; + +&wifi { + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <27 4>, <81 4>, <85 4>; + + sdc2_clk_state: sdc2-clk-state { + pins = "sdc2_clk"; + bias-disable; + + /* + * It seems that mmc_test reports errors if drive + * strength is not 16 on clk, cmd, and data pins. + */ + drive-strength = <16>; + }; + + sdc2_cmd_state: sdc2-cmd-state { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <16>; + }; + + sdc2_data_state: sdc2-data-state { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <16>; + }; + + sd_card_det_n_state: sd-card-det-n-state { + pins = "gpio126"; + function = "gpio"; + bias-pull-up; + }; +}; diff --git a/arch/arm/dts/sdm845.dtsi b/arch/arm/dts/sdm845.dtsi index 96c9749a52c0..bf5e6eb9d313 100644 --- a/arch/arm/dts/sdm845.dtsi +++ b/arch/arm/dts/sdm845.dtsi @@ -1,119 +1,5752 @@ -// SPDX-License-Identifier: GPL-2.0+ +// SPDX-License-Identifier: GPL-2.0 /* - * Qualcomm SDM845 chip device tree source - * - * (C) Copyright 2021 Dzmitry Sankouski + * SDM845 SoC device tree source * + * Copyright (c) 2018, The Linux Foundation. All rights reserved. */ -/dts-v1/; - +#include +#include #include -#include "skeleton64.dtsi" +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include / { - soc: soc { - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0 0xffffffff>; + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + i2c9 = &i2c9; + i2c10 = &i2c10; + i2c11 = &i2c11; + i2c12 = &i2c12; + i2c13 = &i2c13; + i2c14 = &i2c14; + i2c15 = &i2c15; + spi0 = &spi0; + spi1 = &spi1; + spi2 = &spi2; + spi3 = &spi3; + spi4 = &spi4; + spi5 = &spi5; + spi6 = &spi6; + spi7 = &spi7; + spi8 = &spi8; + spi9 = &spi9; + spi10 = &spi10; + spi11 = &spi11; + spi12 = &spi12; + spi13 = &spi13; + spi14 = &spi14; + spi15 = &spi15; + }; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <38400000>; + clock-output-names = "xo_board"; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32764>; + }; + }; + + cpus: cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + capacity-dmips-mhz = <611>; + dynamic-power-coefficient = <154>; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; + #cooling-cells = <2>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + cache-level = <3>; + cache-unified; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + capacity-dmips-mhz = <611>; + dynamic-power-coefficient = <154>; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; + #cooling-cells = <2>; + next-level-cache = <&L2_100>; + L2_100: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + capacity-dmips-mhz = <611>; + dynamic-power-coefficient = <154>; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; + #cooling-cells = <2>; + next-level-cache = <&L2_200>; + L2_200: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + capacity-dmips-mhz = <611>; + dynamic-power-coefficient = <154>; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + #cooling-cells = <2>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; + next-level-cache = <&L2_300>; + L2_300: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x400>; + clocks = <&cpufreq_hw 1>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <442>; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; + #cooling-cells = <2>; + next-level-cache = <&L2_400>; + L2_400: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x500>; + clocks = <&cpufreq_hw 1>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <442>; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; + #cooling-cells = <2>; + next-level-cache = <&L2_500>; + L2_500: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <442>; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; + #cooling-cells = <2>; + next-level-cache = <&L2_600>; + L2_600: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x700>; + clocks = <&cpufreq_hw 1>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <442>; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; + #cooling-cells = <2>; + next-level-cache = <&L2_700>; + L2_700: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + + cpu_idle_states: idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "little-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <350>; + exit-latency-us = <461>; + min-residency-us = <1890>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "big-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <264>; + exit-latency-us = <621>; + min-residency-us = <952>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x4100c244>; + entry-latency-us = <3263>; + exit-latency-us = <6562>; + min-residency-us = <9987>; + }; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-sdm845", "qcom,scm"; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0x80000000 0 0>; + }; + + cpu0_opp_table: opp-table-cpu0 { + compatible = "operating-points-v2"; + opp-shared; + + cpu0_opp1: opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <800000 4800000>; + }; + + cpu0_opp2: opp-403200000 { + opp-hz = /bits/ 64 <403200000>; + opp-peak-kBps = <800000 4800000>; + }; + + cpu0_opp3: opp-480000000 { + opp-hz = /bits/ 64 <480000000>; + opp-peak-kBps = <800000 6451200>; + }; + + cpu0_opp4: opp-576000000 { + opp-hz = /bits/ 64 <576000000>; + opp-peak-kBps = <800000 6451200>; + }; + + cpu0_opp5: opp-652800000 { + opp-hz = /bits/ 64 <652800000>; + opp-peak-kBps = <800000 7680000>; + }; + + cpu0_opp6: opp-748800000 { + opp-hz = /bits/ 64 <748800000>; + opp-peak-kBps = <1804000 9216000>; + }; + + cpu0_opp7: opp-825600000 { + opp-hz = /bits/ 64 <825600000>; + opp-peak-kBps = <1804000 9216000>; + }; + + cpu0_opp8: opp-902400000 { + opp-hz = /bits/ 64 <902400000>; + opp-peak-kBps = <1804000 10444800>; + }; + + cpu0_opp9: opp-979200000 { + opp-hz = /bits/ 64 <979200000>; + opp-peak-kBps = <1804000 11980800>; + }; + + cpu0_opp10: opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-peak-kBps = <1804000 11980800>; + }; + + cpu0_opp11: opp-1132800000 { + opp-hz = /bits/ 64 <1132800000>; + opp-peak-kBps = <2188000 13516800>; + }; + + cpu0_opp12: opp-1228800000 { + opp-hz = /bits/ 64 <1228800000>; + opp-peak-kBps = <2188000 15052800>; + }; + + cpu0_opp13: opp-1324800000 { + opp-hz = /bits/ 64 <1324800000>; + opp-peak-kBps = <2188000 16588800>; + }; + + cpu0_opp14: opp-1420800000 { + opp-hz = /bits/ 64 <1420800000>; + opp-peak-kBps = <3072000 18124800>; + }; + + cpu0_opp15: opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + opp-peak-kBps = <3072000 19353600>; + }; + + cpu0_opp16: opp-1612800000 { + opp-hz = /bits/ 64 <1612800000>; + opp-peak-kBps = <4068000 19353600>; + }; + + cpu0_opp17: opp-1689600000 { + opp-hz = /bits/ 64 <1689600000>; + opp-peak-kBps = <4068000 20889600>; + }; + + cpu0_opp18: opp-1766400000 { + opp-hz = /bits/ 64 <1766400000>; + opp-peak-kBps = <4068000 22425600>; + }; + }; + + cpu4_opp_table: opp-table-cpu4 { + compatible = "operating-points-v2"; + opp-shared; + + cpu4_opp1: opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <800000 4800000>; + }; + + cpu4_opp2: opp-403200000 { + opp-hz = /bits/ 64 <403200000>; + opp-peak-kBps = <800000 4800000>; + }; + + cpu4_opp3: opp-480000000 { + opp-hz = /bits/ 64 <480000000>; + opp-peak-kBps = <1804000 4800000>; + }; + + cpu4_opp4: opp-576000000 { + opp-hz = /bits/ 64 <576000000>; + opp-peak-kBps = <1804000 4800000>; + }; + + cpu4_opp5: opp-652800000 { + opp-hz = /bits/ 64 <652800000>; + opp-peak-kBps = <1804000 4800000>; + }; + + cpu4_opp6: opp-748800000 { + opp-hz = /bits/ 64 <748800000>; + opp-peak-kBps = <1804000 4800000>; + }; + + cpu4_opp7: opp-825600000 { + opp-hz = /bits/ 64 <825600000>; + opp-peak-kBps = <2188000 9216000>; + }; + + cpu4_opp8: opp-902400000 { + opp-hz = /bits/ 64 <902400000>; + opp-peak-kBps = <2188000 9216000>; + }; + + cpu4_opp9: opp-979200000 { + opp-hz = /bits/ 64 <979200000>; + opp-peak-kBps = <2188000 9216000>; + }; + + cpu4_opp10: opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-peak-kBps = <3072000 9216000>; + }; + + cpu4_opp11: opp-1132800000 { + opp-hz = /bits/ 64 <1132800000>; + opp-peak-kBps = <3072000 11980800>; + }; + + cpu4_opp12: opp-1209600000 { + opp-hz = /bits/ 64 <1209600000>; + opp-peak-kBps = <4068000 11980800>; + }; + + cpu4_opp13: opp-1286400000 { + opp-hz = /bits/ 64 <1286400000>; + opp-peak-kBps = <4068000 11980800>; + }; + + cpu4_opp14: opp-1363200000 { + opp-hz = /bits/ 64 <1363200000>; + opp-peak-kBps = <4068000 15052800>; + }; + + cpu4_opp15: opp-1459200000 { + opp-hz = /bits/ 64 <1459200000>; + opp-peak-kBps = <4068000 15052800>; + }; + + cpu4_opp16: opp-1536000000 { + opp-hz = /bits/ 64 <1536000000>; + opp-peak-kBps = <5412000 15052800>; + }; + + cpu4_opp17: opp-1612800000 { + opp-hz = /bits/ 64 <1612800000>; + opp-peak-kBps = <5412000 15052800>; + }; + + cpu4_opp18: opp-1689600000 { + opp-hz = /bits/ 64 <1689600000>; + opp-peak-kBps = <5412000 19353600>; + }; + + cpu4_opp19: opp-1766400000 { + opp-hz = /bits/ 64 <1766400000>; + opp-peak-kBps = <6220000 19353600>; + }; + + cpu4_opp20: opp-1843200000 { + opp-hz = /bits/ 64 <1843200000>; + opp-peak-kBps = <6220000 19353600>; + }; + + cpu4_opp21: opp-1920000000 { + opp-hz = /bits/ 64 <1920000000>; + opp-peak-kBps = <7216000 19353600>; + }; + + cpu4_opp22: opp-1996800000 { + opp-hz = /bits/ 64 <1996800000>; + opp-peak-kBps = <7216000 20889600>; + }; + + cpu4_opp23: opp-2092800000 { + opp-hz = /bits/ 64 <2092800000>; + opp-peak-kBps = <7216000 20889600>; + }; + + cpu4_opp24: opp-2169600000 { + opp-hz = /bits/ 64 <2169600000>; + opp-peak-kBps = <7216000 20889600>; + }; + + cpu4_opp25: opp-2246400000 { + opp-hz = /bits/ 64 <2246400000>; + opp-peak-kBps = <7216000 20889600>; + }; + + cpu4_opp26: opp-2323200000 { + opp-hz = /bits/ 64 <2323200000>; + opp-peak-kBps = <7216000 20889600>; + }; + + cpu4_opp27: opp-2400000000 { + opp-hz = /bits/ 64 <2400000000>; + opp-peak-kBps = <7216000 22425600>; + }; + + cpu4_opp28: opp-2476800000 { + opp-hz = /bits/ 64 <2476800000>; + opp-peak-kBps = <7216000 22425600>; + }; + + cpu4_opp29: opp-2553600000 { + opp-hz = /bits/ 64 <2553600000>; + opp-peak-kBps = <7216000 22425600>; + }; + + cpu4_opp30: opp-2649600000 { + opp-hz = /bits/ 64 <2649600000>; + opp-peak-kBps = <7216000 22425600>; + }; + + cpu4_opp31: opp-2745600000 { + opp-hz = /bits/ 64 <2745600000>; + opp-peak-kBps = <7216000 25497600>; + }; + + cpu4_opp32: opp-2803200000 { + opp-hz = /bits/ 64 <2803200000>; + opp-peak-kBps = <7216000 25497600>; + }; + }; + + dsi_opp_table: opp-table-dsi { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-180000000 { + opp-hz = /bits/ 64 <180000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-275000000 { + opp-hz = /bits/ 64 <275000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-328580000 { + opp-hz = /bits/ 64 <328580000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + + qspi_opp_table: opp-table-qspi { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-150000000 { + opp-hz = /bits/ 64 <150000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + + qup_opp_table: opp-table-qup { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-128000000 { + opp-hz = /bits/ 64 <128000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = ; + }; + + psci: psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: power-domain-cluster { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: hyp-mem@85700000 { + reg = <0 0x85700000 0 0x600000>; + no-map; + }; + + xbl_mem: xbl-mem@85e00000 { + reg = <0 0x85e00000 0 0x100000>; + no-map; + }; + + aop_mem: aop-mem@85fc0000 { + reg = <0 0x85fc0000 0 0x20000>; + no-map; + }; + + aop_cmd_db_mem: aop-cmd-db-mem@85fe0000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x85fe0000 0 0x20000>; + no-map; + }; + + smem@86000000 { + compatible = "qcom,smem"; + reg = <0x0 0x86000000 0 0x200000>; + no-map; + hwlocks = <&tcsr_mutex 3>; + }; + + tz_mem: tz@86200000 { + reg = <0 0x86200000 0 0x2d00000>; + no-map; + }; + + rmtfs_mem: rmtfs@88f00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0x88f00000 0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = ; + }; + + qseecom_mem: qseecom@8ab00000 { + reg = <0 0x8ab00000 0 0x1400000>; + no-map; + }; + + camera_mem: camera-mem@8bf00000 { + reg = <0 0x8bf00000 0 0x500000>; + no-map; + }; + + ipa_fw_mem: ipa-fw@8c400000 { + reg = <0 0x8c400000 0 0x10000>; + no-map; + }; + + ipa_gsi_mem: ipa-gsi@8c410000 { + reg = <0 0x8c410000 0 0x5000>; + no-map; + }; + + gpu_mem: gpu@8c415000 { + reg = <0 0x8c415000 0 0x2000>; + no-map; + }; + + adsp_mem: adsp@8c500000 { + reg = <0 0x8c500000 0 0x1a00000>; + no-map; + }; + + wlan_msa_mem: wlan-msa@8df00000 { + reg = <0 0x8df00000 0 0x100000>; + no-map; + }; + + mpss_region: mpss@8e000000 { + reg = <0 0x8e000000 0 0x7800000>; + no-map; + }; + + venus_mem: venus@95800000 { + reg = <0 0x95800000 0 0x500000>; + no-map; + }; + + cdsp_mem: cdsp@95d00000 { + reg = <0 0x95d00000 0 0x800000>; + no-map; + }; + + mba_region: mba@96500000 { + reg = <0 0x96500000 0 0x200000>; + no-map; + }; + + slpi_mem: slpi@96700000 { + reg = <0 0x96700000 0 0x1400000>; + no-map; + }; + + spss_mem: spss@97b00000 { + reg = <0 0x97b00000 0 0x100000>; + no-map; + }; + + mdata_mem: mpss-metadata { + alloc-ranges = <0 0xa0000000 0 0x20000000>; + size = <0 0x4000>; + no-map; + }; + + fastrpc_mem: fastrpc { + compatible = "shared-dma-pool"; + alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>; + alignment = <0x0 0x400000>; + size = <0x0 0x1000000>; + reusable; + }; + }; + + adsp_pas: remoteproc-adsp { + compatible = "qcom,sdm845-adsp-pas"; + + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + memory-region = <&adsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = ; + label = "lpass"; + qcom,remote-pid = <2>; + mboxes = <&apss_shared 8>; + + apr { + compatible = "qcom,apr-v2"; + qcom,glink-channels = "apr_audio_svc"; + qcom,domain = ; + #address-cells = <1>; + #size-cells = <0>; + qcom,intents = <512 20>; + + service@3 { + reg = ; + compatible = "qcom,q6core"; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + }; + + q6afe: service@4 { + compatible = "qcom,q6afe"; + reg = ; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + }; + }; + + q6asm: service@7 { + compatible = "qcom,q6asm"; + reg = ; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + iommus = <&apps_smmu 0x1821 0x0>; + }; + }; + + q6adm: service@8 { + compatible = "qcom,q6adm"; + reg = ; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1823 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1824 0x0>; + }; + }; + }; + }; + + cdsp_pas: remoteproc-cdsp { + compatible = "qcom,sdm845-cdsp-pas"; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + memory-region = <&cdsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&cdsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = ; + label = "turing"; + qcom,remote-pid = <5>; + mboxes = <&apss_shared 4>; + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x1401 0x30>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x1402 0x30>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1403 0x30>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1404 0x30>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1405 0x30>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x1406 0x30>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x1407 0x30>; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x1408 0x30>; + }; + }; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + + interrupts = ; + + mboxes = <&apss_shared 6>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + cdsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + cdsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-lpass { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = ; + + mboxes = <&apss_shared 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts = ; + mboxes = <&apss_shared 14>; + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-slpi { + compatible = "qcom,smp2p"; + qcom,smem = <481>, <430>; + interrupts = ; + mboxes = <&apss_shared 26>; + qcom,local-pid = <0>; + qcom,remote-pid = <3>; + + slpi_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + slpi_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; compatible = "simple-bus"; gcc: clock-controller@100000 { compatible = "qcom,gcc-sdm845"; - reg = <0x100000 0x1f0000>; + reg = <0 0x00100000 0 0x1f0000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>, + <&pcie0_phy>, + <&pcie1_phy>; + clock-names = "bi_tcxo", + "bi_tcxo_ao", + "sleep_clk", + "pcie_0_pipe_clk", + "pcie_1_pipe_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + power-domains = <&rpmhpd SDM845_CX>; + }; + + qfprom@784000 { + compatible = "qcom,sdm845-qfprom", "qcom,qfprom"; + reg = <0 0x00784000 0 0x8ff>; + #address-cells = <1>; + #size-cells = <1>; + + qusb2p_hstx_trim: hstx-trim-primary@1eb { + reg = <0x1eb 0x1>; + bits = <1 4>; + }; + + qusb2s_hstx_trim: hstx-trim-secondary@1eb { + reg = <0x1eb 0x2>; + bits = <6 4>; + }; + }; + + rng: rng@793000 { + compatible = "qcom,prng-ee"; + reg = <0 0x00793000 0 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + gpi_dma0: dma-controller@800000 { + #dma-cells = <3>; + compatible = "qcom,sdm845-gpi-dma"; + reg = <0 0x00800000 0 0x60000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + ; + dma-channels = <13>; + dma-channel-mask = <0xfa>; + iommus = <&apps_smmu 0x0016 0x0>; + status = "disabled"; + }; + + qupv3_id_0: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x008c0000 0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + iommus = <&apps_smmu 0x3 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core"; + status = "disabled"; + + i2c0: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi0: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart0: serial@880000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart0_default>; + interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c1: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c1_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi1: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi1_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart1: serial@884000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart1_default>; + interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c2: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00888000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi2: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00888000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi2_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart2: serial@888000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00888000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart2_default>; + interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c3: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c3_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi3: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi3_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart3: serial@88c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart3_default>; + interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c4: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c4_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi4: spi@890000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi4_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart4: serial@890000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart4_default>; + interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c5: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c5_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi5: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi5_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart5: serial@894000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart5_default>; + interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c6: i2c@898000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00898000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, + <&gpi_dma0 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi6: spi@898000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00898000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi6_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, + <&gpi_dma0 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart6: serial@898000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00898000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart6_default>; + interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c7: i2c@89c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0089c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c7_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + status = "disabled"; + }; + + spi7: spi@89c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0089c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi7_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>, + <&gpi_dma0 1 7 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart7: serial@89c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x0089c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart7_default>; + interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + }; + + gpi_dma1: dma-controller@a00000 { + #dma-cells = <3>; + compatible = "qcom,sdm845-gpi-dma"; + reg = <0 0x00a00000 0 0x60000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + ; + dma-channels = <13>; + dma-channel-mask = <0xfa>; + iommus = <&apps_smmu 0x06d6 0x0>; + status = "disabled"; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x00ac0000 0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + iommus = <&apps_smmu 0x6c3 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core"; + status = "disabled"; + + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c8_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi8: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi8_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart8: serial@a80000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart8_default>; + interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a84000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c9_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi9: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a84000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi9_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart9: serial@a84000 { + compatible = "qcom,geni-debug-uart"; + reg = <0 0x00a84000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart9_default>; + interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c10_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi10: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi10_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart10: serial@a88000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart10_default>; + interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a8c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c11_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi11: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a8c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi11_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart11: serial@a8c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a8c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart11_default>; + interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c12_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi12: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi12_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart12: serial@a90000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart12_default>; + interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c13: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c13_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, + <&gpi_dma1 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi13: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi13_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, + <&gpi_dma1 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart13: serial@a94000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart13_default>; + interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c14: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a98000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c14_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, + <&gpi_dma1 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi14: spi@a98000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a98000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi14_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, + <&gpi_dma1 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart14: serial@a98000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a98000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart14_default>; + interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c15: i2c@a9c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a9c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c15_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + status = "disabled"; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, + <&gpi_dma1 1 7 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + }; + + spi15: spi@a9c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a9c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi15_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>, + <&gpi_dma1 1 7 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart15: serial@a9c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a9c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart15_default>; + interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + }; + + llcc: system-cache-controller@1100000 { + compatible = "qcom,sdm845-llcc"; + reg = <0 0x01100000 0 0x45000>, <0 0x01180000 0 0x50000>, + <0 0x01200000 0 0x50000>, <0 0x01280000 0 0x50000>, + <0 0x01300000 0 0x50000>; + reg-names = "llcc0_base", "llcc1_base", "llcc2_base", + "llcc3_base", "llcc_broadcast_base"; + interrupts = ; + }; + + dma@10a2000 { + compatible = "qcom,sdm845-dcc", "qcom,dcc"; + reg = <0x0 0x010a2000 0x0 0x1000>, + <0x0 0x010ae000 0x0 0x2000>; + }; + + pmu@114a000 { + compatible = "qcom,sdm845-llcc-bwmon"; + reg = <0 0x0114a000 0 0x1000>; + interrupts = ; + interconnects = <&mem_noc MASTER_LLCC 3 &mem_noc SLAVE_EBI1 3>; + + operating-points-v2 = <&llcc_bwmon_opp_table>; + + llcc_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* + * The interconnect path bandwidth taken from + * cpu4_opp_table bandwidth for gladiator_noc-mem_noc + * interconnect. This also matches the + * bandwidth table of qcom,llccbw (qcom,bw-tbl, + * bus width: 4 bytes) from msm-4.9 downstream + * kernel. + */ + opp-0 { + opp-peak-kBps = <800000>; + }; + opp-1 { + opp-peak-kBps = <1804000>; + }; + opp-2 { + opp-peak-kBps = <3072000>; + }; + opp-3 { + opp-peak-kBps = <5412000>; + }; + opp-4 { + opp-peak-kBps = <7216000>; + }; + }; + }; + + pmu@1436400 { + compatible = "qcom,sdm845-cpu-bwmon", "qcom,sdm845-bwmon"; + reg = <0 0x01436400 0 0x600>; + interrupts = ; + interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_LLCC 3>; + + operating-points-v2 = <&cpu_bwmon_opp_table>; + + cpu_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* + * The interconnect path bandwidth taken from + * cpu4_opp_table bandwidth for OSM L3 + * interconnect. This also matches the OSM L3 + * from bandwidth table of qcom,cpu4-l3lat-mon + * (qcom,core-dev-table, bus width: 16 bytes) + * from msm-4.9 downstream kernel. + */ + opp-0 { + opp-peak-kBps = <4800000>; + }; + opp-1 { + opp-peak-kBps = <9216000>; + }; + opp-2 { + opp-peak-kBps = <15052800>; + }; + opp-3 { + opp-peak-kBps = <20889600>; + }; + opp-4 { + opp-peak-kBps = <25497600>; + }; + }; + }; + + pcie0: pci@1c00000 { + compatible = "qcom,pcie-sdm845"; + reg = <0 0x01c00000 0 0x2000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60100000 0 0x100000>, + <0 0x01c07000 0 0x1000>; + reg-names = "parf", "dbi", "elbi", "config", "mhi"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0xd00000>; + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu"; + + iommu-map = <0x0 &apps_smmu 0x1c10 0x1>, + <0x100 &apps_smmu 0x1c11 0x1>, + <0x200 &apps_smmu 0x1c12 0x1>, + <0x300 &apps_smmu 0x1c13 0x1>, + <0x400 &apps_smmu 0x1c14 0x1>, + <0x500 &apps_smmu 0x1c15 0x1>, + <0x600 &apps_smmu 0x1c16 0x1>, + <0x700 &apps_smmu 0x1c17 0x1>, + <0x800 &apps_smmu 0x1c18 0x1>, + <0x900 &apps_smmu 0x1c19 0x1>, + <0xa00 &apps_smmu 0x1c1a 0x1>, + <0xb00 &apps_smmu 0x1c1b 0x1>, + <0xc00 &apps_smmu 0x1c1c 0x1>, + <0xd00 &apps_smmu 0x1c1d 0x1>, + <0xe00 &apps_smmu 0x1c1e 0x1>, + <0xf00 &apps_smmu 0x1c1f 0x1>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_0_GDSC>; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie0_phy: phy@1c06000 { + compatible = "qcom,sdm845-qmp-pcie-phy"; + reg = <0 0x01c06000 0 0x1000>; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_CLKREF_CLK>, + <&gcc GCC_PCIE_PHY_REFGEN_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "refgen", + "pipe"; + + clock-output-names = "pcie_0_pipe_clk"; + #clock-cells = <0>; + + #phy-cells = <0>; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + }; + + pcie1: pci@1c08000 { + compatible = "qcom,pcie-sdm845"; + reg = <0 0x01c08000 0 0x2000>, + <0 0x40000000 0 0xf1d>, + <0 0x40000f20 0 0xa8>, + <0 0x40100000 0 0x100000>, + <0 0x01c0c000 0 0x1000>; + reg-names = "parf", "dbi", "elbi", "config", "mhi"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_1_CLKREF_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ref", + "tbu"; + + assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; + assigned-clock-rates = <19200000>; + + iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, + <0x100 &apps_smmu 0x1c01 0x1>, + <0x200 &apps_smmu 0x1c02 0x1>, + <0x300 &apps_smmu 0x1c03 0x1>, + <0x400 &apps_smmu 0x1c04 0x1>, + <0x500 &apps_smmu 0x1c05 0x1>, + <0x600 &apps_smmu 0x1c06 0x1>, + <0x700 &apps_smmu 0x1c07 0x1>, + <0x800 &apps_smmu 0x1c08 0x1>, + <0x900 &apps_smmu 0x1c09 0x1>, + <0xa00 &apps_smmu 0x1c0a 0x1>, + <0xb00 &apps_smmu 0x1c0b 0x1>, + <0xc00 &apps_smmu 0x1c0c 0x1>, + <0xd00 &apps_smmu 0x1c0d 0x1>, + <0xe00 &apps_smmu 0x1c0e 0x1>, + <0xf00 &apps_smmu 0x1c0f 0x1>; + + resets = <&gcc GCC_PCIE_1_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_1_GDSC>; + + phys = <&pcie1_phy>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie1_phy: phy@1c0a000 { + compatible = "qcom,sdm845-qhp-pcie-phy"; + reg = <0 0x01c0a000 0 0x2000>; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_CLKREF_CLK>, + <&gcc GCC_PCIE_PHY_REFGEN_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "refgen", + "pipe"; + + clock-output-names = "pcie_1_pipe_clk"; + #clock-cells = <0>; + + #phy-cells = <0>; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + }; + + mem_noc: interconnect@1380000 { + compatible = "qcom,sdm845-mem-noc"; + reg = <0 0x01380000 0 0x27200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + dc_noc: interconnect@14e0000 { + compatible = "qcom,sdm845-dc-noc"; + reg = <0 0x014e0000 0 0x400>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + config_noc: interconnect@1500000 { + compatible = "qcom,sdm845-config-noc"; + reg = <0 0x01500000 0 0x5080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1620000 { + compatible = "qcom,sdm845-system-noc"; + reg = <0 0x01620000 0 0x18080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sdm845-aggre1-noc"; + reg = <0 0x016e0000 0 0x15080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect@1700000 { + compatible = "qcom,sdm845-aggre2-noc"; + reg = <0 0x01700000 0 0x1f300>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mmss_noc: interconnect@1740000 { + compatible = "qcom,sdm845-mmss-noc"; + reg = <0 0x01740000 0 0x1c100>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + ufs_mem_hc: ufshc@1d84000 { + compatible = "qcom,sdm845-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x2500>, + <0 0x01d90000 0 0x8000>; + reg-names = "std", "ice"; + interrupts = ; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + power-domains = <&gcc UFS_PHY_GDSC>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + iommus = <&apps_smmu 0x100 0xf>; + + clock-names = + "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk", + "ice_core_clk"; + clocks = + <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>, + <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + freq-table-hz = + <50000000 200000000>, + <0 0>, + <0 0>, + <37500000 150000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>, + <75000000 300000000>; + + interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mem_noc SLAVE_EBI1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>; + interconnect-names = "ufs-ddr", "cpu-ufs"; + + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sdm845-qmp-ufs-phy"; + reg = <0 0x01d87000 0 0x18c>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-names = "ref", + "ref_aux"; + clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + status = "disabled"; + + ufs_mem_phy_lanes: phy@1d87400 { + reg = <0 0x01d87400 0 0x108>, + <0 0x01d87600 0 0x1e0>, + <0 0x01d87c00 0 0x1dc>, + <0 0x01d87800 0 0x108>, + <0 0x01d87a00 0 0x1e0>; + #phy-cells = <0>; + }; + }; + + cryptobam: dma-controller@1dc4000 { + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; + reg = <0 0x01dc4000 0 0x24000>; + interrupts = ; + clocks = <&rpmhcc RPMH_CE_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + iommus = <&apps_smmu 0x704 0x1>, + <&apps_smmu 0x706 0x1>, + <&apps_smmu 0x714 0x1>, + <&apps_smmu 0x716 0x1>; + }; + + crypto: crypto@1dfa000 { + compatible = "qcom,crypto-v5.4"; + reg = <0 0x01dfa000 0 0x6000>; + clocks = <&gcc GCC_CE1_AHB_CLK>, + <&gcc GCC_CE1_AXI_CLK>, + <&rpmhcc RPMH_CE_CLK>; + clock-names = "iface", "bus", "core"; + dmas = <&cryptobam 6>, <&cryptobam 7>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x704 0x1>, + <&apps_smmu 0x706 0x1>, + <&apps_smmu 0x714 0x1>, + <&apps_smmu 0x716 0x1>; + }; + + ipa: ipa@1e40000 { + compatible = "qcom,sdm845-ipa"; + + iommus = <&apps_smmu 0x720 0x0>, + <&apps_smmu 0x722 0x0>; + reg = <0 0x01e40000 0 0x7000>, + <0 0x01e47000 0 0x2000>, + <0 0x01e04000 0 0x2c000>; + reg-names = "ipa-reg", + "ipa-shared", + "gsi"; + + interrupts-extended = <&intc GIC_SPI 311 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, + <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ipa", + "gsi", + "ipa-clock-query", + "ipa-setup-ready"; + + clocks = <&rpmhcc RPMH_IPA_CLK>; + clock-names = "core"; + + interconnects = <&aggre2_noc MASTER_IPA 0 &mem_noc SLAVE_EBI1 0>, + <&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_IMEM 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>; + interconnect-names = "memory", + "imem", + "config"; + + qcom,smem-states = <&ipa_smp2p_out 0>, + <&ipa_smp2p_out 1>; + qcom,smem-state-names = "ipa-clock-enabled-valid", + "ipa-clock-enabled"; + + status = "disabled"; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0 0x01f40000 0 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr_regs_1: syscon@1f60000 { + compatible = "qcom,sdm845-tcsr", "syscon"; + reg = <0 0x01f60000 0 0x20000>; + }; + + tlmm: pinctrl@3400000 { + compatible = "qcom,sdm845-pinctrl"; + reg = <0 0x03400000 0 0xc00000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 151>; + wakeup-parent = <&pdc_intc>; + + cci0_default: cci0-default-state { + /* SDA, SCL */ + pins = "gpio17", "gpio18"; + function = "cci_i2c"; + + bias-pull-up; + drive-strength = <2>; /* 2 mA */ + }; + + cci0_sleep: cci0-sleep-state { + /* SDA, SCL */ + pins = "gpio17", "gpio18"; + function = "cci_i2c"; + + drive-strength = <2>; /* 2 mA */ + bias-pull-down; + }; + + cci1_default: cci1-default-state { + /* SDA, SCL */ + pins = "gpio19", "gpio20"; + function = "cci_i2c"; + + bias-pull-up; + drive-strength = <2>; /* 2 mA */ + }; + + cci1_sleep: cci1-sleep-state { + /* SDA, SCL */ + pins = "gpio19", "gpio20"; + function = "cci_i2c"; + + drive-strength = <2>; /* 2 mA */ + bias-pull-down; + }; + + qspi_clk: qspi-clk-state { + pins = "gpio95"; + function = "qspi_clk"; + }; + + qspi_cs0: qspi-cs0-state { + pins = "gpio90"; + function = "qspi_cs"; + }; + + qspi_cs1: qspi-cs1-state { + pins = "gpio89"; + function = "qspi_cs"; + }; + + qspi_data0: qspi-data0-state { + pins = "gpio91"; + function = "qspi_data"; + }; + + qspi_data1: qspi-data1-state { + pins = "gpio92"; + function = "qspi_data"; + }; + + qspi_data23: qspi-data23-state { + pins = "gpio93", "gpio94"; + function = "qspi_data"; + }; + + qup_i2c0_default: qup-i2c0-default-state { + pins = "gpio0", "gpio1"; + function = "qup0"; + }; + + qup_i2c1_default: qup-i2c1-default-state { + pins = "gpio17", "gpio18"; + function = "qup1"; + }; + + qup_i2c2_default: qup-i2c2-default-state { + pins = "gpio27", "gpio28"; + function = "qup2"; + }; + + qup_i2c3_default: qup-i2c3-default-state { + pins = "gpio41", "gpio42"; + function = "qup3"; + }; + + qup_i2c4_default: qup-i2c4-default-state { + pins = "gpio89", "gpio90"; + function = "qup4"; + }; + + qup_i2c5_default: qup-i2c5-default-state { + pins = "gpio85", "gpio86"; + function = "qup5"; + }; + + qup_i2c6_default: qup-i2c6-default-state { + pins = "gpio45", "gpio46"; + function = "qup6"; + }; + + qup_i2c7_default: qup-i2c7-default-state { + pins = "gpio93", "gpio94"; + function = "qup7"; + }; + + qup_i2c8_default: qup-i2c8-default-state { + pins = "gpio65", "gpio66"; + function = "qup8"; + }; + + qup_i2c9_default: qup-i2c9-default-state { + pins = "gpio6", "gpio7"; + function = "qup9"; + }; + + qup_i2c10_default: qup-i2c10-default-state { + pins = "gpio55", "gpio56"; + function = "qup10"; + }; + + qup_i2c11_default: qup-i2c11-default-state { + pins = "gpio31", "gpio32"; + function = "qup11"; + }; + + qup_i2c12_default: qup-i2c12-default-state { + pins = "gpio49", "gpio50"; + function = "qup12"; + }; + + qup_i2c13_default: qup-i2c13-default-state { + pins = "gpio105", "gpio106"; + function = "qup13"; + }; + + qup_i2c14_default: qup-i2c14-default-state { + pins = "gpio33", "gpio34"; + function = "qup14"; + }; + + qup_i2c15_default: qup-i2c15-default-state { + pins = "gpio81", "gpio82"; + function = "qup15"; + }; + + qup_spi0_default: qup-spi0-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "qup0"; + }; + + qup_spi1_default: qup-spi1-default-state { + pins = "gpio17", "gpio18", "gpio19", "gpio20"; + function = "qup1"; + }; + + qup_spi2_default: qup-spi2-default-state { + pins = "gpio27", "gpio28", "gpio29", "gpio30"; + function = "qup2"; + }; + + qup_spi3_default: qup-spi3-default-state { + pins = "gpio41", "gpio42", "gpio43", "gpio44"; + function = "qup3"; + }; + + qup_spi4_default: qup-spi4-default-state { + pins = "gpio89", "gpio90", "gpio91", "gpio92"; + function = "qup4"; + }; + + qup_spi5_default: qup-spi5-default-state { + pins = "gpio85", "gpio86", "gpio87", "gpio88"; + function = "qup5"; + }; + + qup_spi6_default: qup-spi6-default-state { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "qup6"; + }; + + qup_spi7_default: qup-spi7-default-state { + pins = "gpio93", "gpio94", "gpio95", "gpio96"; + function = "qup7"; + }; + + qup_spi8_default: qup-spi8-default-state { + pins = "gpio65", "gpio66", "gpio67", "gpio68"; + function = "qup8"; + }; + + qup_spi9_default: qup-spi9-default-state { + pins = "gpio6", "gpio7", "gpio4", "gpio5"; + function = "qup9"; + }; + + qup_spi10_default: qup-spi10-default-state { + pins = "gpio55", "gpio56", "gpio53", "gpio54"; + function = "qup10"; + }; + + qup_spi11_default: qup-spi11-default-state { + pins = "gpio31", "gpio32", "gpio33", "gpio34"; + function = "qup11"; + }; + + qup_spi12_default: qup-spi12-default-state { + pins = "gpio49", "gpio50", "gpio51", "gpio52"; + function = "qup12"; + }; + + qup_spi13_default: qup-spi13-default-state { + pins = "gpio105", "gpio106", "gpio107", "gpio108"; + function = "qup13"; + }; + + qup_spi14_default: qup-spi14-default-state { + pins = "gpio33", "gpio34", "gpio31", "gpio32"; + function = "qup14"; + }; + + qup_spi15_default: qup-spi15-default-state { + pins = "gpio81", "gpio82", "gpio83", "gpio84"; + function = "qup15"; + }; + + qup_uart0_default: qup-uart0-default-state { + qup_uart0_tx: tx-pins { + pins = "gpio2"; + function = "qup0"; + }; + + qup_uart0_rx: rx-pins { + pins = "gpio3"; + function = "qup0"; + }; + }; + + qup_uart1_default: qup-uart1-default-state { + qup_uart1_tx: tx-pins { + pins = "gpio19"; + function = "qup1"; + }; + + qup_uart1_rx: rx-pins { + pins = "gpio20"; + function = "qup1"; + }; + }; + + qup_uart2_default: qup-uart2-default-state { + qup_uart2_tx: tx-pins { + pins = "gpio29"; + function = "qup2"; + }; + + qup_uart2_rx: rx-pins { + pins = "gpio30"; + function = "qup2"; + }; + }; + + qup_uart3_default: qup-uart3-default-state { + qup_uart3_tx: tx-pins { + pins = "gpio43"; + function = "qup3"; + }; + + qup_uart3_rx: rx-pins { + pins = "gpio44"; + function = "qup3"; + }; + }; + + qup_uart3_4pin: qup-uart3-4pin-state { + qup_uart3_4pin_cts: cts-pins { + pins = "gpio41"; + function = "qup3"; + }; + + qup_uart3_4pin_rts_tx: rts-tx-pins { + pins = "gpio42", "gpio43"; + function = "qup3"; + }; + + qup_uart3_4pin_rx: rx-pins { + pins = "gpio44"; + function = "qup3"; + }; + }; + + qup_uart4_default: qup-uart4-default-state { + qup_uart4_tx: tx-pins { + pins = "gpio91"; + function = "qup4"; + }; + + qup_uart4_rx: rx-pins { + pins = "gpio92"; + function = "qup4"; + }; + }; + + qup_uart5_default: qup-uart5-default-state { + qup_uart5_tx: tx-pins { + pins = "gpio87"; + function = "qup5"; + }; + + qup_uart5_rx: rx-pins { + pins = "gpio88"; + function = "qup5"; + }; + }; + + qup_uart6_default: qup-uart6-default-state { + qup_uart6_tx: tx-pins { + pins = "gpio47"; + function = "qup6"; + }; + + qup_uart6_rx: rx-pins { + pins = "gpio48"; + function = "qup6"; + }; + }; + + qup_uart6_4pin: qup-uart6-4pin-state { + qup_uart6_4pin_cts: cts-pins { + pins = "gpio45"; + function = "qup6"; + bias-pull-down; + }; + + qup_uart6_4pin_rts_tx: rts-tx-pins { + pins = "gpio46", "gpio47"; + function = "qup6"; + drive-strength = <2>; + bias-disable; + }; + + qup_uart6_4pin_rx: rx-pins { + pins = "gpio48"; + function = "qup6"; + bias-pull-up; + }; + }; + + qup_uart7_default: qup-uart7-default-state { + qup_uart7_tx: tx-pins { + pins = "gpio95"; + function = "qup7"; + }; + + qup_uart7_rx: rx-pins { + pins = "gpio96"; + function = "qup7"; + }; + }; + + qup_uart8_default: qup-uart8-default-state { + qup_uart8_tx: tx-pins { + pins = "gpio67"; + function = "qup8"; + }; + + qup_uart8_rx: rx-pins { + pins = "gpio68"; + function = "qup8"; + }; + }; + + qup_uart9_default: qup-uart9-default-state { + qup_uart9_tx: tx-pins { + pins = "gpio4"; + function = "qup9"; + }; + + qup_uart9_rx: rx-pins { + pins = "gpio5"; + function = "qup9"; + }; + }; + + qup_uart10_default: qup-uart10-default-state { + qup_uart10_tx: tx-pins { + pins = "gpio53"; + function = "qup10"; + }; + + qup_uart10_rx: rx-pins { + pins = "gpio54"; + function = "qup10"; + }; + }; + + qup_uart11_default: qup-uart11-default-state { + qup_uart11_tx: tx-pins { + pins = "gpio33"; + function = "qup11"; + }; + + qup_uart11_rx: rx-pins { + pins = "gpio34"; + function = "qup11"; + }; + }; + + qup_uart12_default: qup-uart12-default-state { + qup_uart12_tx: tx-pins { + pins = "gpio51"; + function = "qup0"; + }; + + qup_uart12_rx: rx-pins { + pins = "gpio52"; + function = "qup0"; + }; + }; + + qup_uart13_default: qup-uart13-default-state { + qup_uart13_tx: tx-pins { + pins = "gpio107"; + function = "qup13"; + }; + + qup_uart13_rx: rx-pins { + pins = "gpio108"; + function = "qup13"; + }; + }; + + qup_uart14_default: qup-uart14-default-state { + qup_uart14_tx: tx-pins { + pins = "gpio31"; + function = "qup14"; + }; + + qup_uart14_rx: rx-pins { + pins = "gpio32"; + function = "qup14"; + }; + }; + + qup_uart15_default: qup-uart15-default-state { + qup_uart15_tx: tx-pins { + pins = "gpio83"; + function = "qup15"; + }; + + qup_uart15_rx: rx-pins { + pins = "gpio84"; + function = "qup15"; + }; + }; + + quat_mi2s_sleep: quat-mi2s-sleep-state { + pins = "gpio58", "gpio59"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + quat_mi2s_active: quat-mi2s-active-state { + pins = "gpio58", "gpio59"; + function = "qua_mi2s"; + drive-strength = <8>; + bias-disable; + output-high; + }; + + quat_mi2s_sd0_sleep: quat-mi2s-sd0-sleep-state { + pins = "gpio60"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + quat_mi2s_sd0_active: quat-mi2s-sd0-active-state { + pins = "gpio60"; + function = "qua_mi2s"; + drive-strength = <8>; + bias-disable; + }; + + quat_mi2s_sd1_sleep: quat-mi2s-sd1-sleep-state { + pins = "gpio61"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + quat_mi2s_sd1_active: quat-mi2s-sd1-active-state { + pins = "gpio61"; + function = "qua_mi2s"; + drive-strength = <8>; + bias-disable; + }; + + quat_mi2s_sd2_sleep: quat-mi2s-sd2-sleep-state { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + quat_mi2s_sd2_active: quat-mi2s-sd2-active-state { + pins = "gpio62"; + function = "qua_mi2s"; + drive-strength = <8>; + bias-disable; + }; + + quat_mi2s_sd3_sleep: quat-mi2s-sd3-sleep-state { + pins = "gpio63"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + quat_mi2s_sd3_active: quat-mi2s-sd3-active-state { + pins = "gpio63"; + function = "qua_mi2s"; + drive-strength = <8>; + bias-disable; + }; + }; + + mss_pil: remoteproc@4080000 { + compatible = "qcom,sdm845-mss-pil"; + reg = <0 0x04080000 0 0x408>, <0 0x04180000 0 0x48>; + reg-names = "qdsp6", "rmb"; + + interrupts-extended = + <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack", + "shutdown-ack"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&gcc GCC_MSS_GPLL0_DIV_CLK_SRC>, + <&gcc GCC_MSS_SNOC_AXI_CLK>, + <&gcc GCC_MSS_MFAB_AXIS_CLK>, + <&gcc GCC_PRNG_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "bus", "mem", "gpll0_mss", + "snoc_axi", "mnoc_axi", "prng", "xo"; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + resets = <&aoss_reset AOSS_CC_MSS_RESTART>, + <&pdc_reset PDC_MODEM_SYNC_RESET>; + reset-names = "mss_restart", "pdc_reset"; + + qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>; + + power-domains = <&rpmhpd SDM845_CX>, + <&rpmhpd SDM845_MX>, + <&rpmhpd SDM845_MSS>; + power-domain-names = "cx", "mx", "mss"; + + status = "disabled"; + + mba { + memory-region = <&mba_region>; + }; + + mpss { + memory-region = <&mpss_region>; + }; + + metadata { + memory-region = <&mdata_mem>; + }; + + glink-edge { + interrupts = ; + label = "modem"; + qcom,remote-pid = <1>; + mboxes = <&apss_shared 12>; + }; + }; + + gpucc: clock-controller@5090000 { + compatible = "qcom,sdm845-gpucc"; + reg = <0 0x05090000 0 0x9000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + clock-names = "bi_tcxo", + "gcc_gpu_gpll0_clk_src", + "gcc_gpu_gpll0_div_clk_src"; + }; + + slpi_pas: remoteproc@5c00000 { + compatible = "qcom,sdm845-slpi-pas"; + reg = <0 0x5c00000 0 0x4000>; + + interrupts-extended = <&intc GIC_SPI 494 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + qcom,qmp = <&aoss_qmp>; + + power-domains = <&rpmhpd SDM845_CX>, + <&rpmhpd SDM845_MX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&slpi_mem>; + + qcom,smem-states = <&slpi_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = ; + label = "dsps"; + qcom,remote-pid = <3>; + mboxes = <&apss_shared 24>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "sdsp"; + qcom,non-secure-domain; + qcom,vmids = ; + memory-region = <&fastrpc_mem>; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@0 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <0>; + }; + }; + }; + }; + + stm@6002000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0 0x06002000 0 0x1000>, + <0 0x16280000 0 0x180000>; + reg-names = "stm-base", "stm-stimulus-base"; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + stm_out: endpoint { + remote-endpoint = + <&funnel0_in7>; + }; + }; + }; + }; + + funnel@6041000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06041000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel0_out: endpoint { + remote-endpoint = + <&merge_funnel_in0>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@7 { + reg = <7>; + funnel0_in7: endpoint { + remote-endpoint = <&stm_out>; + }; + }; + }; + }; + + funnel@6043000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06043000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel2_out: endpoint { + remote-endpoint = + <&merge_funnel_in2>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@5 { + reg = <5>; + funnel2_in5: endpoint { + remote-endpoint = + <&apss_merge_funnel_out>; + }; + }; + }; + }; + + funnel@6045000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06045000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + merge_funnel_out: endpoint { + remote-endpoint = <&etf_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + merge_funnel_in0: endpoint { + remote-endpoint = + <&funnel0_out>; + }; + }; + + port@2 { + reg = <2>; + merge_funnel_in2: endpoint { + remote-endpoint = + <&funnel2_out>; + }; + }; + }; + }; + + replicator@6046000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0 0x06046000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + replicator_out: endpoint { + remote-endpoint = <&etr_in>; + }; + }; + }; + + in-ports { + port { + replicator_in: endpoint { + remote-endpoint = <&etf_out>; + }; + }; + }; + }; + + etf@6047000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x06047000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etf_out: endpoint { + remote-endpoint = + <&replicator_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + etf_in: endpoint { + remote-endpoint = + <&merge_funnel_out>; + }; + }; + }; + }; + + etr@6048000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x06048000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,scatter-gather; + + in-ports { + port { + etr_in: endpoint { + remote-endpoint = + <&replicator_out>; + }; + }; + }; + }; + + etm@7040000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07040000 0 0x1000>; + + cpu = <&CPU0>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = + <&apss_funnel_in0>; + }; + }; + }; + }; + + etm@7140000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07140000 0 0x1000>; + + cpu = <&CPU1>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = + <&apss_funnel_in1>; + }; + }; + }; + }; + + etm@7240000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07240000 0 0x1000>; + + cpu = <&CPU2>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = + <&apss_funnel_in2>; + }; + }; + }; + }; + + etm@7340000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07340000 0 0x1000>; + + cpu = <&CPU3>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = + <&apss_funnel_in3>; + }; + }; + }; + }; + + etm@7440000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07440000 0 0x1000>; + + cpu = <&CPU4>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + out-ports { + port { + etm4_out: endpoint { + remote-endpoint = + <&apss_funnel_in4>; + }; + }; + }; + }; + + etm@7540000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07540000 0 0x1000>; + + cpu = <&CPU5>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + out-ports { + port { + etm5_out: endpoint { + remote-endpoint = + <&apss_funnel_in5>; + }; + }; + }; + }; + + etm@7640000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07640000 0 0x1000>; + + cpu = <&CPU6>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + out-ports { + port { + etm6_out: endpoint { + remote-endpoint = + <&apss_funnel_in6>; + }; + }; + }; + }; + + etm@7740000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07740000 0 0x1000>; + + cpu = <&CPU7>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + + out-ports { + port { + etm7_out: endpoint { + remote-endpoint = + <&apss_funnel_in7>; + }; + }; + }; + }; + + funnel@7800000 { /* APSS Funnel */ + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x07800000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + apss_funnel_out: endpoint { + remote-endpoint = + <&apss_merge_funnel_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_funnel_in0: endpoint { + remote-endpoint = + <&etm0_out>; + }; + }; + + port@1 { + reg = <1>; + apss_funnel_in1: endpoint { + remote-endpoint = + <&etm1_out>; + }; + }; + + port@2 { + reg = <2>; + apss_funnel_in2: endpoint { + remote-endpoint = + <&etm2_out>; + }; + }; + + port@3 { + reg = <3>; + apss_funnel_in3: endpoint { + remote-endpoint = + <&etm3_out>; + }; + }; + + port@4 { + reg = <4>; + apss_funnel_in4: endpoint { + remote-endpoint = + <&etm4_out>; + }; + }; + + port@5 { + reg = <5>; + apss_funnel_in5: endpoint { + remote-endpoint = + <&etm5_out>; + }; + }; + + port@6 { + reg = <6>; + apss_funnel_in6: endpoint { + remote-endpoint = + <&etm6_out>; + }; + }; + + port@7 { + reg = <7>; + apss_funnel_in7: endpoint { + remote-endpoint = + <&etm7_out>; + }; + }; + }; + }; + + funnel@7810000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x07810000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + apss_merge_funnel_out: endpoint { + remote-endpoint = + <&funnel2_in5>; + }; + }; + }; + + in-ports { + port { + apss_merge_funnel_in: endpoint { + remote-endpoint = + <&apss_funnel_out>; + }; + }; + }; + }; + + sdhc_2: mmc@8804000 { + compatible = "qcom,sdm845-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x08804000 0 0x1000>; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + iommus = <&apps_smmu 0xa0 0xf>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&sdhc2_opp_table>; + + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-9600000 { + opp-hz = /bits/ 64 <9600000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-201500000 { + opp-hz = /bits/ 64 <201500000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + qspi: spi@88df000 { + compatible = "qcom,sdm845-qspi", "qcom,qspi-v1"; + reg = <0 0x088df000 0 0x600>; + iommus = <&apps_smmu 0x160 0x0>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <&gcc GCC_QSPI_CORE_CLK>; + clock-names = "iface", "core"; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qspi_opp_table>; + status = "disabled"; + }; + + slim: slim-ngd@171c0000 { + compatible = "qcom,slim-ngd-v2.1.0"; + reg = <0 0x171c0000 0 0x2c000>; + interrupts = ; + + dmas = <&slimbam 3>, <&slimbam 4>; + dma-names = "rx", "tx"; + + iommus = <&apps_smmu 0x1806 0x0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + lmh_cluster1: lmh@17d70800 { + compatible = "qcom,sdm845-lmh"; + reg = <0 0x17d70800 0 0x400>; + interrupts = ; + cpus = <&CPU4>; + qcom,lmh-temp-arm-millicelsius = <65000>; + qcom,lmh-temp-low-millicelsius = <94500>; + qcom,lmh-temp-high-millicelsius = <95000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + lmh_cluster0: lmh@17d78800 { + compatible = "qcom,sdm845-lmh"; + reg = <0 0x17d78800 0 0x400>; + interrupts = ; + cpus = <&CPU0>; + qcom,lmh-temp-arm-millicelsius = <65000>; + qcom,lmh-temp-low-millicelsius = <94500>; + qcom,lmh-temp-high-millicelsius = <95000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + usb_1_hsphy: phy@88e2000 { + compatible = "qcom,sdm845-qusb2-phy", "qcom,qusb2-v2-phy"; + reg = <0 0x088e2000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + nvmem-cells = <&qusb2p_hstx_trim>; + }; + + usb_2_hsphy: phy@88e3000 { + compatible = "qcom,sdm845-qusb2-phy", "qcom,qusb2-v2-phy"; + reg = <0 0x088e3000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + + nvmem-cells = <&qusb2s_hstx_trim>; + }; + + usb_1_qmpphy: phy@88e8000 { + compatible = "qcom,sdm845-qmp-usb3-dp-phy"; + reg = <0 0x088e8000 0 0x3000>; + status = "disabled"; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "usb3_pipe", + "cfg_ahb"; + + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + #clock-cells = <1>; + #phy-cells = <1>; + }; + + usb_2_qmpphy: phy@88eb000 { + compatible = "qcom,sdm845-qmp-usb3-uni-phy"; + reg = <0 0x088eb000 0 0x18c>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_CLK>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "com_aux"; + + resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, + <&gcc GCC_USB3_PHY_SEC_BCR>; + reset-names = "phy", "common"; + + usb_2_ssphy: phy@88eb200 { + reg = <0 0x088eb200 0 0x128>, + <0 0x088eb400 0 0x1fc>, + <0 0x088eb800 0 0x218>, + <0 0x088eb600 0 0x70>; + #clock-cells = <0>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + }; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sdm845-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <150000000>; + + interrupts = , + , + , + ; + interrupt-names = "hs_phy_irq", "ss_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + interconnects = <&aggre2_noc MASTER_USB3_0 0 &mem_noc SLAVE_EBI1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + usb_1_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = ; + iommus = <&apps_smmu 0x740 0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + usb_2: usb@a8f8800 { + compatible = "qcom,sdm845-dwc3", "qcom,dwc3"; + reg = <0 0x0a8f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>; + assigned-clock-rates = <19200000>, <150000000>; + + interrupts = , + , + , + ; + interrupt-names = "hs_phy_irq", "ss_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_SEC_GDSC>; + + resets = <&gcc GCC_USB30_SEC_BCR>; + + interconnects = <&aggre2_noc MASTER_USB3_1 0 &mem_noc SLAVE_EBI1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + usb_2_dwc3: usb@a800000 { + compatible = "snps,dwc3"; + reg = <0 0x0a800000 0 0xcd00>; + interrupts = ; + iommus = <&apps_smmu 0x760 0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_2_hsphy>, <&usb_2_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + venus: video-codec@aa00000 { + compatible = "qcom,sdm845-venus-v2"; + reg = <0 0x0aa00000 0 0xff000>; + interrupts = ; + power-domains = <&videocc VENUS_GDSC>, + <&videocc VCODEC0_GDSC>, + <&videocc VCODEC1_GDSC>, + <&rpmhpd SDM845_CX>; + power-domain-names = "venus", "vcodec0", "vcodec1", "cx"; + operating-points-v2 = <&venus_opp_table>; + clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, + <&videocc VIDEO_CC_VENUS_AHB_CLK>, + <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>, + <&videocc VIDEO_CC_VCODEC0_CORE_CLK>, + <&videocc VIDEO_CC_VCODEC0_AXI_CLK>, + <&videocc VIDEO_CC_VCODEC1_CORE_CLK>, + <&videocc VIDEO_CC_VCODEC1_AXI_CLK>; + clock-names = "core", "iface", "bus", + "vcodec0_core", "vcodec0_bus", + "vcodec1_core", "vcodec1_bus"; + iommus = <&apps_smmu 0x10a0 0x8>, + <&apps_smmu 0x10b0 0x0>; + memory-region = <&venus_mem>; + interconnects = <&mmss_noc MASTER_VIDEO_P0 0 &mem_noc SLAVE_EBI1 0>, + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_VENUS_CFG 0>; + interconnect-names = "video-mem", "cpu-cfg"; + + status = "disabled"; + + video-core0 { + compatible = "venus-decoder"; + }; + + video-core1 { + compatible = "venus-encoder"; + }; + + venus_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-320000000 { + opp-hz = /bits/ 64 <320000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-380000000 { + opp-hz = /bits/ 64 <380000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-444000000 { + opp-hz = /bits/ 64 <444000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-533000097 { + opp-hz = /bits/ 64 <533000097>; + required-opps = <&rpmhpd_opp_turbo>; + }; + }; + }; + + videocc: clock-controller@ab00000 { + compatible = "qcom,sdm845-videocc"; + reg = <0 0x0ab00000 0 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; + }; + + camss: camss@acb3000 { + compatible = "qcom,sdm845-camss"; + + reg = <0 0x0acb3000 0 0x1000>, + <0 0x0acba000 0 0x1000>, + <0 0x0acc8000 0 0x1000>, + <0 0x0ac65000 0 0x1000>, + <0 0x0ac66000 0 0x1000>, + <0 0x0ac67000 0 0x1000>, + <0 0x0ac68000 0 0x1000>, + <0 0x0acaf000 0 0x4000>, + <0 0x0acb6000 0 0x4000>, + <0 0x0acc4000 0 0x4000>; + reg-names = "csid0", + "csid1", + "csid2", + "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "vfe0", + "vfe1", + "vfe_lite"; + + interrupts = , + , + , + , + , + , + , + , + , + ; + interrupt-names = "csid0", + "csid1", + "csid2", + "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "vfe0", + "vfe1", + "vfe_lite"; + + power-domains = <&clock_camcc IFE_0_GDSC>, + <&clock_camcc IFE_1_GDSC>, + <&clock_camcc TITAN_TOP_GDSC>; + + clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>, + <&clock_camcc CAM_CC_CPAS_AHB_CLK>, + <&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_0_CSID_CLK>, + <&clock_camcc CAM_CC_IFE_0_CSID_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_1_CSID_CLK>, + <&clock_camcc CAM_CC_IFE_1_CSID_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK>, + <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK_SRC>, + <&clock_camcc CAM_CC_CSIPHY0_CLK>, + <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK>, + <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK_SRC>, + <&clock_camcc CAM_CC_CSIPHY1_CLK>, + <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK>, + <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK_SRC>, + <&clock_camcc CAM_CC_CSIPHY2_CLK>, + <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK>, + <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK_SRC>, + <&clock_camcc CAM_CC_CSIPHY3_CLK>, + <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK>, + <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK_SRC>, + <&gcc GCC_CAMERA_AHB_CLK>, + <&gcc GCC_CAMERA_AXI_CLK>, + <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&clock_camcc CAM_CC_SOC_AHB_CLK>, + <&clock_camcc CAM_CC_IFE_0_AXI_CLK>, + <&clock_camcc CAM_CC_IFE_0_CLK>, + <&clock_camcc CAM_CC_IFE_0_CPHY_RX_CLK>, + <&clock_camcc CAM_CC_IFE_0_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_1_AXI_CLK>, + <&clock_camcc CAM_CC_IFE_1_CLK>, + <&clock_camcc CAM_CC_IFE_1_CPHY_RX_CLK>, + <&clock_camcc CAM_CC_IFE_1_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_LITE_CLK>, + <&clock_camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>, + <&clock_camcc CAM_CC_IFE_LITE_CLK_SRC>; + clock-names = "camnoc_axi", + "cpas_ahb", + "cphy_rx_src", + "csi0", + "csi0_src", + "csi1", + "csi1_src", + "csi2", + "csi2_src", + "csiphy0", + "csiphy0_timer", + "csiphy0_timer_src", + "csiphy1", + "csiphy1_timer", + "csiphy1_timer_src", + "csiphy2", + "csiphy2_timer", + "csiphy2_timer_src", + "csiphy3", + "csiphy3_timer", + "csiphy3_timer_src", + "gcc_camera_ahb", + "gcc_camera_axi", + "slow_ahb_src", + "soc_ahb", + "vfe0_axi", + "vfe0", + "vfe0_cphy_rx", + "vfe0_src", + "vfe1_axi", + "vfe1", + "vfe1_cphy_rx", + "vfe1_src", + "vfe_lite", + "vfe_lite_cphy_rx", + "vfe_lite_src"; + + iommus = <&apps_smmu 0x0808 0x0>, + <&apps_smmu 0x0810 0x8>, + <&apps_smmu 0x0c08 0x0>, + <&apps_smmu 0x0c10 0x8>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + }; + + port@2 { + reg = <2>; + }; + + port@3 { + reg = <3>; + }; + }; + }; + + cci: cci@ac4a000 { + compatible = "qcom,sdm845-cci", "qcom,msm8996-cci"; + #address-cells = <1>; + #size-cells = <0>; + + reg = <0 0x0ac4a000 0 0x4000>; + interrupts = ; + power-domains = <&clock_camcc TITAN_TOP_GDSC>; + + clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>, + <&clock_camcc CAM_CC_SOC_AHB_CLK>, + <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&clock_camcc CAM_CC_CPAS_AHB_CLK>, + <&clock_camcc CAM_CC_CCI_CLK>, + <&clock_camcc CAM_CC_CCI_CLK_SRC>; + clock-names = "camnoc_axi", + "soc_ahb", + "slow_ahb_src", + "cpas_ahb", + "cci", + "cci_src"; + + assigned-clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>, + <&clock_camcc CAM_CC_CCI_CLK>; + assigned-clock-rates = <80000000>, <37500000>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cci0_default &cci1_default>; + pinctrl-1 = <&cci0_sleep &cci1_sleep>; + + status = "disabled"; + + cci_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + clock_camcc: clock-controller@ad00000 { + compatible = "qcom,sdm845-camcc"; + reg = <0 0x0ad00000 0 0x10000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + }; + + mdss: display-subsystem@ae00000 { + compatible = "qcom,sdm845-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "core"; + + interrupts = ; + interrupt-controller; + #interrupt-cells = <1>; + + interconnects = <&mmss_noc MASTER_MDP0 0 &mem_noc SLAVE_EBI1 0>, + <&mmss_noc MASTER_MDP1 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + iommus = <&apps_smmu 0x880 0x8>, + <&apps_smmu 0xc80 0x8>; + + status = "disabled"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + mdss_mdp: display-controller@ae01000 { + compatible = "qcom,sdm845-dpu"; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "gcc-bus", "iface", "bus", "core", "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SDM845_CX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf0_out: endpoint { + remote-endpoint = <&dp_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@2 { + reg = <2>; + dpu_intf2_out: endpoint { + remote-endpoint = <&mdss_dsi1_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-171428571 { + opp-hz = /bits/ 64 <171428571>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-344000000 { + opp-hz = /bits/ 64 <344000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-430000000 { + opp-hz = /bits/ 64 <430000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dp: displayport-controller@ae90000 { + status = "disabled"; + compatible = "qcom,sdm845-dp"; + + reg = <0 0x0ae90000 0 0x200>, + <0 0x0ae90200 0 0x200>, + <0 0x0ae90400 0 0x600>, + <0 0x0ae90a00 0 0x600>, + <0 0x0ae91000 0 0x600>; + + interrupt-parent = <&mdss>; + interrupts = <12>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; + clock-names = "core_iface", "core_aux", "ctrl_link", + "ctrl_link_iface", "stream_pixel"; + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd SDM845_CX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + dp_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + dp_out: endpoint { }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-162000000 { + opp-hz = /bits/ 64 <162000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dsi0: dsi@ae94000 { + compatible = "qcom,sdm845-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae94000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SDM845_CX>; + + phys = <&mdss_dsi0_phy>; + + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + }; + + mdss_dsi0_phy: phy@ae94400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0 0x0ae94400 0 0x200>, + <0 0x0ae94600 0 0x280>, + <0 0x0ae94a00 0 0x1e0>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + + mdss_dsi1: dsi@ae96000 { + compatible = "qcom,sdm845-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae96000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SDM845_CX>; + + phys = <&mdss_dsi1_phy>; + + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi1_out: endpoint { + }; + }; + }; + }; + + mdss_dsi1_phy: phy@ae96400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0 0x0ae96400 0 0x200>, + <0 0x0ae96600 0 0x280>, + <0 0x0ae96a00 0 0x10e>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + }; + + gpu: gpu@5000000 { + compatible = "qcom,adreno-630.2", "qcom,adreno"; + + reg = <0 0x05000000 0 0x40000>, <0 0x509e000 0 0x10>; + reg-names = "kgsl_3d0_reg_memory", "cx_mem"; + + /* + * Look ma, no clocks! The GPU clocks and power are + * controlled entirely by the GMU + */ + + interrupts = ; + + iommus = <&adreno_smmu 0>; + + operating-points-v2 = <&gpu_opp_table>; + + qcom,gmu = <&gmu>; + + interconnects = <&mem_noc MASTER_GFX3D 0 &mem_noc SLAVE_EBI1 0>; + interconnect-names = "gfx-mem"; + + status = "disabled"; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-710000000 { + opp-hz = /bits/ 64 <710000000>; + opp-level = ; + opp-peak-kBps = <7216000>; + }; + + opp-675000000 { + opp-hz = /bits/ 64 <675000000>; + opp-level = ; + opp-peak-kBps = <7216000>; + }; + + opp-596000000 { + opp-hz = /bits/ 64 <596000000>; + opp-level = ; + opp-peak-kBps = <6220000>; + }; + + opp-520000000 { + opp-hz = /bits/ 64 <520000000>; + opp-level = ; + opp-peak-kBps = <6220000>; + }; + + opp-414000000 { + opp-hz = /bits/ 64 <414000000>; + opp-level = ; + opp-peak-kBps = <4068000>; + }; + + opp-342000000 { + opp-hz = /bits/ 64 <342000000>; + opp-level = ; + opp-peak-kBps = <2724000>; + }; + + opp-257000000 { + opp-hz = /bits/ 64 <257000000>; + opp-level = ; + opp-peak-kBps = <1648000>; + }; + }; + }; + + adreno_smmu: iommu@5040000 { + compatible = "qcom,sdm845-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2"; + reg = <0 0x05040000 0 0x10000>; + #iommu-cells = <1>; + #global-interrupts = <2>; + interrupts = , + , + , + , + , + , + , + , + , + ; + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_CFG_AHB_CLK>; + clock-names = "bus", "iface"; + + power-domains = <&gpucc GPU_CX_GDSC>; + }; + + gmu: gmu@506a000 { + compatible = "qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; + + reg = <0 0x0506a000 0 0x30000>, + <0 0x0b280000 0 0x10000>, + <0 0x0b480000 0 0x10000>; + reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq"; + + interrupts = , + ; + interrupt-names = "hfi", "gmu"; + + clocks = <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>; + clock-names = "gmu", "cxo", "axi", "memnoc"; + + power-domains = <&gpucc GPU_CX_GDSC>, + <&gpucc GPU_GX_GDSC>; + power-domain-names = "cx", "gx"; + + iommus = <&adreno_smmu 5>; + + operating-points-v2 = <&gmu_opp_table>; + + status = "disabled"; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-level = ; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-level = ; + }; + }; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,sdm845-dispcc"; + reg = <0 0x0af00000 0 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_DISP_GPLL0_CLK_SRC>, + <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>, + <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + clock-names = "bi_tcxo", + "gcc_disp_gpll0_clk_src", + "gcc_disp_gpll0_div_clk_src", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk", + "dsi1_phy_pll_out_byteclk", + "dsi1_phy_pll_out_dsiclk", + "dp_link_clk_divsel_ten", + "dp_vco_divided_clk_src_mux"; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; }; - tlmm: pinctrl@3400000 { - compatible = "qcom,sdm845-pinctrl"; - reg = <0x3400000 0xc00000>; - gpio-count = <150>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 150>; + pdc_intc: interrupt-controller@b220000 { + compatible = "qcom,sdm845-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>; + qcom,pdc-ranges = <0 480 94>, <94 609 15>, <115 630 7>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; - /* DEBUG UART */ - qup_uart9: qup-uart9-default { - pins = "GPIO_4", "GPIO_5"; - function = "qup9"; + pdc_reset: reset-controller@b2e0000 { + compatible = "qcom,sdm845-pdc-global"; + reg = <0 0x0b2e0000 0 0x20000>; + #reset-cells = <1>; + }; + + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1ff>, /* TM */ + <0 0x0c222000 0 0x1ff>; /* SROT */ + #qcom,sensors = <13>; + interrupts = , + ; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1ff>, /* TM */ + <0 0x0c223000 0 0x1ff>; /* SROT */ + #qcom,sensors = <8>; + interrupts = , + ; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + aoss_reset: reset-controller@c2a0000 { + compatible = "qcom,sdm845-aoss-cc"; + reg = <0 0x0c2a0000 0 0x31000>; + #reset-cells = <1>; + }; + + aoss_qmp: power-management@c300000 { + compatible = "qcom,sdm845-aoss-qmp", "qcom,aoss-qmp"; + reg = <0 0x0c300000 0 0x400>; + interrupts = ; + mboxes = <&apss_shared 0>; + + #clock-cells = <0>; + + cx_cdev: cx { + #cooling-cells = <2>; + }; + + ebi_cdev: ebi { + #cooling-cells = <2>; }; }; - qupv3_id_1: geniqup@ac0000 { - compatible = "qcom,geni-se-qup"; - reg = <0x00ac0000 0x6000>; + sram@c3f0000 { + compatible = "qcom,sdm845-rpmh-stats"; + reg = <0 0x0c3f0000 0 0x400>; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0 0x0c440000 0 0x1100>, + <0 0x0c600000 0 0x2000000>, + <0 0x0e600000 0 0x100000>, + <0 0x0e700000 0 0xa0000>, + <0 0x0c40a000 0 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = ; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + sram@146bf000 { + compatible = "qcom,sdm845-imem", "syscon", "simple-mfd"; + reg = <0 0x146bf000 0 0x1000>; + #address-cells = <1>; #size-cells = <1>; - ranges; - uart9: serial@a84000 { - compatible = "qcom,geni-debug-uart"; - reg = <0xa84000 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart9>; + ranges = <0 0 0x146bf000 0x1000>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; }; }; - spmi@c440000 { - compatible = "qcom,spmi-pmic-arb"; - reg = <0xc440000 0x1100>, - <0xc600000 0x2000000>, - <0xe600000 0x100000>; - reg-names = "core", "chnls", "obsrvr"; - #address-cells = <0x1>; - #size-cells = <0x1>; + apps_smmu: iommu@15000000 { + compatible = "qcom,sdm845-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x80000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; - qcom,revid@100 { - compatible = "qcom,qpnp-revid"; - reg = <0x100 0x100>; + lpasscc: clock-controller@17014000 { + compatible = "qcom,sdm845-lpasscc"; + reg = <0 0x17014000 0 0x1f004>, <0 0x17300000 0 0x200>; + reg-names = "cc", "qdsp6ss"; + #clock-cells = <1>; + status = "disabled"; + }; + + gladiator_noc: interconnect@17900000 { + compatible = "qcom,sdm845-gladiator-noc"; + reg = <0 0x17900000 0 0xd080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + watchdog@17980000 { + compatible = "qcom,apss-wdt-sdm845", "qcom,kpss-wdt"; + reg = <0 0x17980000 0 0x1000>; + clocks = <&sleep_clk>; + interrupts = ; + }; + + apss_shared: mailbox@17990000 { + compatible = "qcom,sdm845-apss-shared"; + reg = <0 0x17990000 0 0x1000>; + #mbox-cells = <1>; + }; + + apps_rsc: rsc@179c0000 { + label = "apps_rsc"; + compatible = "qcom,rpmh-rsc"; + reg = <0 0x179c0000 0 0x10000>, + <0 0x179d0000 0 0x10000>, + <0 0x179e0000 0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = , + , + ; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = , + , + , + ; + power-domains = <&CLUSTER_PD>; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; }; - pmic0: pm8998@0 { - compatible = "qcom,spmi-pmic"; - reg = <0x0 0x1>; - #address-cells = <0x1>; - #size-cells = <0x1>; - - pm8998_pon: pon@800 { - compatible = "qcom,pm8998-pon"; - - reg = <0x800 0x100>; - mode-bootloader = <0x2>; - mode-recovery = <0x1>; - - pm8998_pwrkey: pwrkey { - compatible = "qcom,pm8941-pwrkey"; - debounce = <15625>; - bias-pull-up; - }; - - pm8998_resin: resin { - compatible = "qcom,pm8941-resin"; - debounce = <15625>; - bias-pull-up; - status = "disabled"; - }; - }; - - pm8998_gpios: pm8998_gpios@c000 { - compatible = "qcom,pm8998-gpio"; - reg = <0xc000 0x1a00>; - gpio-controller; - gpio-ranges = <&pm8998_gpios 0 0 26>; - #gpio-cells = <2>; - }; + rpmhcc: clock-controller { + compatible = "qcom,sdm845-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; }; - pmic1: pm8998@1 { - compatible = "qcom,spmi-pmic"; - reg = <0x1 0x0>; - #address-cells = <0x2>; - #size-cells = <0x0>; + rpmhpd: power-controller { + compatible = "qcom,sdm845-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = ; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = ; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = ; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = ; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = ; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = ; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = ; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = ; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = ; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = ; + }; + }; + }; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0 0x17a00000 0 0x10000>, /* GICD */ + <0 0x17a60000 0 0x100000>; /* GICR * 8 */ + interrupts = ; + + msi-controller@17a40000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0 0x17a40000 0 0x20000>; + status = "disabled"; + }; + }; + + slimbam: dma-controller@17184000 { + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; + qcom,controlled-remotely; + reg = <0 0x17184000 0 0x2a000>; + num-channels = <31>; + interrupts = ; + #dma-cells = <1>; + qcom,ee = <1>; + qcom,num-ees = <2>; + iommus = <&apps_smmu 0x1806 0x0>; + }; + + timer@17c90000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x20000000>; + compatible = "arm,armv7-timer-mem"; + reg = <0 0x17c90000 0 0x1000>; + + frame@17ca0000 { + frame-number = <0>; + interrupts = , + ; + reg = <0x17ca0000 0x1000>, + <0x17cb0000 0x1000>; + }; + + frame@17cc0000 { + frame-number = <1>; + interrupts = ; + reg = <0x17cc0000 0x1000>; + status = "disabled"; + }; + + frame@17cd0000 { + frame-number = <2>; + interrupts = ; + reg = <0x17cd0000 0x1000>; + status = "disabled"; + }; + + frame@17ce0000 { + frame-number = <3>; + interrupts = ; + reg = <0x17ce0000 0x1000>; + status = "disabled"; + }; + + frame@17cf0000 { + frame-number = <4>; + interrupts = ; + reg = <0x17cf0000 0x1000>; + status = "disabled"; + }; + + frame@17d00000 { + frame-number = <5>; + interrupts = ; + reg = <0x17d00000 0x1000>; + status = "disabled"; + }; + + frame@17d10000 { + frame-number = <6>; + interrupts = ; + reg = <0x17d10000 0x1000>; + status = "disabled"; + }; + }; + + osm_l3: interconnect@17d41000 { + compatible = "qcom,sdm845-osm-l3", "qcom,osm-l3"; + reg = <0 0x17d41000 0 0x1400>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #interconnect-cells = <1>; + }; + + cpufreq_hw: cpufreq@17d43000 { + compatible = "qcom,sdm845-cpufreq-hw", "qcom,cpufreq-hw"; + reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>; + reg-names = "freq-domain0", "freq-domain1"; + + interrupts-extended = <&lmh_cluster0 0>, <&lmh_cluster1 0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + #clock-cells = <1>; + }; + + wifi: wifi@18800000 { + compatible = "qcom,wcn3990-wifi"; + status = "disabled"; + reg = <0 0x18800000 0 0x800000>; + reg-names = "membase"; + memory-region = <&wlan_msa_mem>; + clock-names = "cxo_ref_clk_pin"; + clocks = <&rpmhcc RPMH_RF_CLK2>; + interrupts = + , + , + , + , + , + , + , + , + , + , + , + ; + iommus = <&apps_smmu 0x0040 0x1>; + }; + }; + + sound: sound { + }; + + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 1>; + + trips { + cpu0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 2>; + + trips { + cpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 4>; + + trips { + cpu3_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu4-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 7>; + + trips { + cpu4_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 8>; + + trips { + cpu5_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 9>; + + trips { + cpu6_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 10>; + + trips { + cpu7_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + aoss0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 0>; + + trips { + aoss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cluster0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 5>; + + trips { + cluster0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cluster0_crit: cluster0_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cluster1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 6>; + + trips { + cluster1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cluster1_crit: cluster1_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpu-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 11>; + + trips { + gpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 12>; + + trips { + gpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + aoss1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 0>; + + trips { + aoss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + q6-modem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 1>; + + trips { + q6_modem_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + mem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 2>; + + trips { + mem_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 3>; + + trips { + wlan_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + q6-hvx-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 4>; + + trips { + q6_hvx_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 5>; + + trips { + camera_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 6>; + + trips { + video_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 7>; + + trips { + modem_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; }; }; }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; }; diff --git a/arch/arm/dts/starqltechn-uboot.dtsi b/arch/arm/dts/starqltechn-uboot.dtsi deleted file mode 100644 index 55c6d18412ba..000000000000 --- a/arch/arm/dts/starqltechn-uboot.dtsi +++ /dev/null @@ -1,27 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * U-Boot addition to handle Samsung S9 SM-G9600 (starqltechn) pins - * - * (C) Copyright 2021 Dzmitry Sankouski - * - */ - -/ -{ - framebuffer@9D400000 { - bootph-all; - }; - soc { - bootph-all; - serial@a84000 { - bootph-all; - }; - clock-controller@100000 { - bootph-all; - }; - pinctrl@3400000 { - bootph-all; - }; - }; -}; - diff --git a/arch/arm/dts/starqltechn.dts b/arch/arm/dts/starqltechn.dts deleted file mode 100644 index 0842e19adb60..000000000000 --- a/arch/arm/dts/starqltechn.dts +++ /dev/null @@ -1,68 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Samsung S9 SM-G9600 (starqltechn) board device tree source - * - * (C) Copyright 2021 Dzmitry Sankouski - * - */ - -/dts-v1/; - -#include "sdm845.dtsi" -#include -#include - -/ { - model = "Samsung S9 (SM-G9600)"; - compatible = "qcom,sdm845-mtp", "qcom,sdm845", "qcom,mtp"; - #address-cells = <2>; - #size-cells = <2>; - - chosen { - stdout-path = "serial0:921600n8"; - }; - - aliases { - serial0 = &uart9; - }; - - memory { - device_type = "memory"; - reg = <0 0x80000000 0 0xfe1bffff>; - }; - - psci { - compatible = "arm,psci-1.0"; - method = "smc"; - }; - - framebuffer: framebuffer@9D400000 { - compatible = "simple-framebuffer"; - reg = <0 0x9D400000 0 (2960 * 1440 * 4)>;//2400000 - width = <1440>; - height = <2960>; - stride = <(1440 * 4)>; - format = "a8r8g8b8"; - }; - - soc: soc { - serial@a84000 { - status = "okay"; - }; - }; -}; - -&pm8998_resin { - status = "okay"; -}; - -&tlmm { - muic_i2c: muic-i2c-n { - pins = "GPIO_33", "GPIO_34"; - drive-strength = <0x2>; - function = "gpio"; - bias-disable; - }; -}; - -#include "starqltechn-uboot.dtsi" diff --git a/configs/qcom_defconfig b/configs/qcom_defconfig index 8bd6313d50e4..3c6bdc2071b2 100644 --- a/configs/qcom_defconfig +++ b/configs/qcom_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_POSITION_INDEPENDENT=y CONFIG_ARCH_SNAPDRAGON=y -CONFIG_DEFAULT_DEVICE_TREE="dragonboard845c" +CONFIG_DEFAULT_DEVICE_TREE="sdm845-db845c" CONFIG_SYS_LOAD_ADDR=0x0 CONFIG_FIT=y CONFIG_FIT_VERBOSE=y