From patchwork Tue Jan 30 14:05:02 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Caleb Connolly X-Patchwork-Id: 768077 Delivered-To: patch@linaro.org Received: by 2002:adf:ee41:0:b0:33a:e5bd:fedd with SMTP id w1csp1386516wro; Tue, 30 Jan 2024 06:07:56 -0800 (PST) X-Google-Smtp-Source: AGHT+IGTiwwQif0UifD6YvUE7dD1wGhivvTrKhHL+h5/QBVm76LGYiHPwk2qs7aVKHMNcqk9H5fq X-Received: by 2002:adf:ec47:0:b0:33a:e82e:74c6 with SMTP id w7-20020adfec47000000b0033ae82e74c6mr1403243wrn.20.1706623676559; Tue, 30 Jan 2024 06:07:56 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1706623676; cv=none; d=google.com; s=arc-20160816; b=U6Xjxj6bKFCV0RU4OHxt1M8he18TZQgH/lpY7da9Bn+GCpbqRXbsAyUI+wGAMuXNRc 7cDrZ7xp7FMmk939/ufTTKOXEjcbOyQraLgWyCRiu0T4/rYGigqbhwLA2yffDIGYdFub v/GYxVxNqVS/eAJZMwn+Esd9UIo/j1Bi/QcjTONHDlHSxOvvK4VPjdER7P7w6+c/l4xb YSEFHvbkgixoKDtn46EJxQG4bp5fiILZG8Py9kwFMR0UuPopGT5XssvvOzQh6VkgABXo 5UMPcgFOI9wDXHjhsGkjUow77cxdnZUkVCf2k+Ql7XfYUX+DBoZqOUYmfHvfnToWKflR Inmw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=sender:errors-to:list-subscribe:list-help:list-post:list-archive :list-unsubscribe:list-id:precedence:cc:to:in-reply-to:references :message-id:content-transfer-encoding:mime-version:subject:date:from :dkim-signature; bh=DCLWYQ7OTv84xyssiT9OUj+crxOO1sqf+t/KTEVCyps=; fh=GB9E9KzRIiNXhkRWIZbZpSMjbCjxnqnvE8nYuQxq8UI=; b=kADbA09oXY8bqiHhrrRpi3Cu03QjVDlW1GzucF2kg4vvvZKxTyaD5JSmQ68nEu/8Zj kDKJIp1RMZogCzHfXj/jjrWmpT9lPnFYIPgGRHeL9OJ1N2NDpyv+dTqpEYd8c8MhSQ1+ I/8OHhSQe7c0imE7oQhPpiUx3rZRSWMM0dz+za/21KBRFdKyRyPmWtbnodoukEXHb2Kn HMk9DLgg1a3ZzRVwWHLTszZY0cak+QutFq93oha1KQTyEA6e2KAnJ0yRBEtGkRUqkPoi Kfnu0OCpYSUs/xlozJTk6qwNlRkjdY/Vidd6J4VPS4BDkDym5EhFklfqH43ZkEg7qfuM QfDQ== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=Jlr7njL7; spf=pass (google.com: domain of u-boot-bounces@lists.denx.de designates 2a01:238:438b:c500:173d:9f52:ddab:ee01 as permitted sender) smtp.mailfrom=u-boot-bounces@lists.denx.de; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from phobos.denx.de (phobos.denx.de. [2a01:238:438b:c500:173d:9f52:ddab:ee01]) by mx.google.com with ESMTPS id m16-20020adff390000000b0033aedf4a45csi2489315wro.1025.2024.01.30.06.07.55 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 30 Jan 2024 06:07:56 -0800 (PST) Received-SPF: pass (google.com: domain of u-boot-bounces@lists.denx.de designates 2a01:238:438b:c500:173d:9f52:ddab:ee01 as permitted sender) client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=Jlr7njL7; spf=pass (google.com: domain of u-boot-bounces@lists.denx.de designates 2a01:238:438b:c500:173d:9f52:ddab:ee01 as permitted sender) smtp.mailfrom=u-boot-bounces@lists.denx.de; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id B2B4987E1A; Tue, 30 Jan 2024 15:05:34 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=pass (2048-bit key; unprotected) header.d=linaro.org header.i=@linaro.org header.b="Jlr7njL7"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id C4D4D87E53; Tue, 30 Jan 2024 15:05:31 +0100 (CET) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_NONE,SPF_PASS, T_SCC_BODY_TEXT_LINE autolearn=ham autolearn_force=no version=3.4.2 Received: from mail-wm1-x330.google.com (mail-wm1-x330.google.com [IPv6:2a00:1450:4864:20::330]) (using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id ADB9987DD2 for ; Tue, 30 Jan 2024 15:05:23 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=caleb.connolly@linaro.org Received: by mail-wm1-x330.google.com with SMTP id 5b1f17b1804b1-40faf6788d1so2481335e9.0 for ; Tue, 30 Jan 2024 06:05:23 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1706623523; x=1707228323; darn=lists.denx.de; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=DCLWYQ7OTv84xyssiT9OUj+crxOO1sqf+t/KTEVCyps=; b=Jlr7njL73jOLgjcXaIdc2GQqWG9Un+rtuGTrgL/y8Xm6/ZVVsNiE7xb9MPe89H1oMJ rECkmxnNjNB0n1khFUJLZ1ZkOHBkK0jL3vVdm5JiTHv0jL0RStuNNhLalGFnOLXrufxD vyq2gL8DbW3NhkTuMrPGJ/mMvTGZo87hJ3lktIUwN6C/cieL1yMplFU54VgBYEVMvnTf YPy8S3s4Iwl43L6frPms4+hSwMoJj/o1xO376gRPt4CjWOCWGShOB5lVHwWpX4ZPpheG o5OviczFkOYv1+7QXfJoil4qYvcGOM9k/p95jJW0T3yyyLFK6TZS1nlDWHYgZPR1WE7r GIBw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1706623523; x=1707228323; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=DCLWYQ7OTv84xyssiT9OUj+crxOO1sqf+t/KTEVCyps=; b=mhIBjv3T1gB2tXUxTETzSFUN/1UPwi+POVk+yP0JA/5ObAtMHE+9UgiT20WElJXuGG cJgy4zTL5hMFt5L/hE+HvnEVVDuoHgZQhNV8tKcN923/7Cx7B/j2ioVsdXG2YsfbVBjY h2qhlzqs0GM0sfxBQ8Prt/1od0QuRnJFebMB14S0zhM48lb9r1+d9qYN+KZiPgWAWtJQ la29mvFTBM+8/zIpu6l3wxUa7zj90sJ3CgPNg6zLuiWNkgbljOLdD95lBQlA7DoApSpb 104kuYH1VVocVoRo94brboZGCMY/fr7imgTDOqdeT2JIQhWKAYxMr7UKKo5JW7oRmOmC 0giQ== X-Gm-Message-State: AOJu0YzoodzJ1oeHhX+839AQtITqxAslLOc5HbAPXo76/ROrnx4txjb+ ankA0mUiDf+QL2n9X3JrQ99UbTem82I/XGRWaBqrUYSbWo9uUXxH9+lWQm+BVFM= X-Received: by 2002:a05:600c:510a:b0:40e:aca0:7b0a with SMTP id o10-20020a05600c510a00b0040eaca07b0amr1646398wms.10.1706623523122; Tue, 30 Jan 2024 06:05:23 -0800 (PST) Received: from lion.localdomain (host-92-17-96-232.as13285.net. [92.17.96.232]) by smtp.gmail.com with ESMTPSA id g11-20020a05600c310b00b0040f035bebfcsm1799017wmo.12.2024.01.30.06.05.22 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 30 Jan 2024 06:05:22 -0800 (PST) From: Caleb Connolly Date: Tue, 30 Jan 2024 14:05:02 +0000 Subject: [PATCH v3 14/36] board: dragonboard410c: upstream DT compat MIME-Version: 1.0 Message-Id: <20240130-b4-qcom-common-target-v3-14-e523cbf9e556@linaro.org> References: <20240130-b4-qcom-common-target-v3-0-e523cbf9e556@linaro.org> In-Reply-To: <20240130-b4-qcom-common-target-v3-0-e523cbf9e556@linaro.org> To: Neil Armstrong , Sumit Garg , Ramon Fried , Dzmitry Sankouski , Caleb Connolly , Peng Fan , Jaehoon Chung , Rayagonda Kokatanur , Lukasz Majewski , Sean Anderson , Jorge Ramirez-Ortiz , Stephan Gerhold Cc: Marek Vasut , u-boot@lists.denx.de X-Mailer: b4 0.13-dev-4bd13 X-Developer-Signature: v=1; a=openpgp-sha256; l=16119; i=caleb.connolly@linaro.org; h=from:subject:message-id; bh=iZx4p+9JnYmlNdPVnJBtVgHKYlzpiDFhAHhgELRoi/U=; b=kA0DAAgReTBFn7kwMhcByyZiAGW5AhGhciYLNkQpBJ4LrohYnqImjqrAAWS5nzo5n/olIL4xf 4h1BAARCAAdFiEEF8imOYKt0z8ot6DQeTBFn7kwMhcFAmW5AhEACgkQeTBFn7kwMhfIawEAhg4H cVErYY53WH2ZlLJJ7VnVmOZ3POGuD517Zj7lKAUA/RbVkqTYQ2npVzRQrgUeUmb5BhLsef90qbL ZIJ62+09Y X-Developer-Key: i=caleb.connolly@linaro.org; a=openpgp; fpr=83B24DA7FE145076BC38BB250CD904EB673A7C47 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de X-Virus-Status: Clean Use the root compatible strings from upstream Linux, add missing '#clock-cells' property to the gcc node. Adjust some of the msm8916/apq8016 drivers to use the correct upstream compatible properties and DT bindings. This prepares us to switch to upstream DT in a future patch. Reviewed-by: Neil Armstrong Signed-off-by: Caleb Connolly --- arch/arm/dts/dragonboard410c.dts | 25 +++- board/qualcomm/dragonboard410c/dragonboard410c.c | 93 +++--------- doc/device-tree-bindings/usb/ehci-msm.txt | 10 -- drivers/clk/qcom/clock-apq8016.c | 7 +- drivers/phy/qcom/msm8916-usbh-phy.c | 4 +- drivers/pinctrl/qcom/pinctrl-apq8016.c | 2 +- drivers/usb/host/ehci-msm.c | 24 ++- include/dt-bindings/clock/qcom,gcc-msm8916.h | 179 +++++++++++++++++++++++ 8 files changed, 248 insertions(+), 96 deletions(-) diff --git a/arch/arm/dts/dragonboard410c.dts b/arch/arm/dts/dragonboard410c.dts index c395e6cc0427..453642b25705 100644 --- a/arch/arm/dts/dragonboard410c.dts +++ b/arch/arm/dts/dragonboard410c.dts @@ -12,7 +12,7 @@ / { model = "Qualcomm Technologies, Inc. Dragonboard 410c"; - compatible = "qcom,dragonboard", "qcom,apq8016-sbc"; + compatible = "qcom,apq8016-sbc", "qcom,apq8016"; qcom,msm-id = <0xce 0x0 0xf8 0x0 0xf9 0x0 0xfa 0x0 0xf7 0x0>; qcom,board-id = <0x10018 0x0>; #address-cells = <0x2>; @@ -79,6 +79,7 @@ reg = <0x1800000 0x80000>; #address-cells = <0x1>; #size-cells = <0x0>; + #clock-cells = <0x1>; }; serial@78b0000 { @@ -91,15 +92,25 @@ }; ehci@78d9000 { - compatible = "qcom,ehci-host"; + compatible = "qcom,ci-hdrc"; reg = <0x78d9000 0x400>; phys = <&ehci_phy>; - }; - ehci_phy: ehci_phy@78d9000 { - compatible = "qcom,apq8016-usbphy"; - reg = <0x78d9000 0x400>; - #phy-cells = <0>; + ulpi { + usb_hs_phy: phy { + compatible = "qcom,usb-hs-phy-msm8916", + "qcom,usb-hs-phy"; + #phy-cells = <0>; + clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>; + clock-names = "ref", "sleep"; + resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>; + reset-names = "phy", "por"; + qcom,init-seq = /bits/ 8 <0x0 0x44>, + <0x1 0x6b>, + <0x2 0x24>, + <0x3 0x13>; + }; + }; }; sdhci@07824000 { diff --git a/board/qualcomm/dragonboard410c/dragonboard410c.c b/board/qualcomm/dragonboard410c/dragonboard410c.c index 350e0e9e20aa..1adac07569ae 100644 --- a/board/qualcomm/dragonboard410c/dragonboard410c.c +++ b/board/qualcomm/dragonboard410c/dragonboard410c.c @@ -9,6 +9,7 @@ #include #include #include +#include #include #include #include @@ -23,84 +24,32 @@ DECLARE_GLOBAL_DATA_PTR; -int dram_init(void) -{ - gd->ram_size = PHYS_SDRAM_1_SIZE; - - return 0; -} - -int dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - - return 0; -} +#define USB_HUB_RESET_GPIO 2 +#define USB_SW_SELECT_GPIO 3 int board_usb_init(int index, enum usb_init_type init) { - static struct udevice *pmic_gpio; - static struct gpio_desc hub_reset, usb_sel; - int ret = 0, node; + struct udevice *usb; + int ret = 0; - if (!pmic_gpio) { - ret = uclass_get_device_by_name(UCLASS_GPIO, - "pm8916_gpios@c000", - &pmic_gpio); - if (ret < 0) { - printf("Failed to find pm8916_gpios@c000 node.\n"); - return ret; - } + /* USB device */ + ret = device_find_global_by_ofnode(ofnode_path("/soc/usb"), &usb); + if (ret) { + printf("Cannot find USB device\n"); + return ret; } - /* Try to request gpios needed to start usb host on dragonboard */ - if (!dm_gpio_is_valid(&hub_reset)) { - node = fdt_subnode_offset(gd->fdt_blob, - dev_of_offset(pmic_gpio), - "usb_hub_reset_pm"); - if (node < 0) { - printf("Failed to find usb_hub_reset_pm dt node.\n"); - return node; - } - ret = gpio_request_by_name_nodev(offset_to_ofnode(node), - "gpios", 0, &hub_reset, 0); - if (ret < 0) { - printf("Failed to request usb_hub_reset_pm gpio.\n"); - return ret; - } - } - - if (!dm_gpio_is_valid(&usb_sel)) { - node = fdt_subnode_offset(gd->fdt_blob, - dev_of_offset(pmic_gpio), - "usb_sw_sel_pm"); - if (node < 0) { - printf("Failed to find usb_sw_sel_pm dt node.\n"); - return 0; - } - ret = gpio_request_by_name_nodev(offset_to_ofnode(node), - "gpios", 0, &usb_sel, 0); - if (ret < 0) { - printf("Failed to request usb_sw_sel_pm gpio.\n"); - return ret; - } - } - - if (init == USB_INIT_HOST) { - /* Start USB Hub */ - dm_gpio_set_dir_flags(&hub_reset, - GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE); - mdelay(100); - /* Switch usb to host connectors */ - dm_gpio_set_dir_flags(&usb_sel, - GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE); - mdelay(100); - } else { /* Device */ - /* Disable hub */ - dm_gpio_set_dir_flags(&hub_reset, GPIOD_IS_OUT); - /* Switch back to device connector */ - dm_gpio_set_dir_flags(&usb_sel, GPIOD_IS_OUT); + /* Select "default" or "device" pinctrl */ + switch (init) { + case USB_INIT_HOST: + pinctrl_select_state(usb, "default"); + break; + case USB_INIT_DEVICE: + pinctrl_select_state(usb, "device"); + break; + default: + debug("Unknown usb_init_type %d\n", init); + break; } return 0; diff --git a/doc/device-tree-bindings/usb/ehci-msm.txt b/doc/device-tree-bindings/usb/ehci-msm.txt deleted file mode 100644 index 205bb07220fb..000000000000 --- a/doc/device-tree-bindings/usb/ehci-msm.txt +++ /dev/null @@ -1,10 +0,0 @@ -Chipidea EHCI controller (part of OTG controller) used on Qualcomm devices. - -Required properties: -- compatible: must be "qcom,ehci-host" -- reg: start address and size of the registers - -ehci@78d9000 { - compatible = "qcom,ehci-host"; - reg = <0x78d9000 0x400>; -}; diff --git a/drivers/clk/qcom/clock-apq8016.c b/drivers/clk/qcom/clock-apq8016.c index 0af7191cff52..9de0ad5ed32d 100644 --- a/drivers/clk/qcom/clock-apq8016.c +++ b/drivers/clk/qcom/clock-apq8016.c @@ -13,6 +13,7 @@ #include #include #include +#include #include "clock-qcom.h" @@ -125,13 +126,13 @@ static ulong apq8016_clk_set_rate(struct clk *clk, ulong rate) struct msm_clk_priv *priv = dev_get_priv(clk->dev); switch (clk->id) { - case 0: /* SDC1 */ + case GCC_SDCC1_APPS_CLK: /* SDC1 */ return clk_init_sdc(priv, 0, rate); break; - case 1: /* SDC2 */ + case GCC_SDCC2_APPS_CLK: /* SDC2 */ return clk_init_sdc(priv, 1, rate); break; - case 4: /* UART2 */ + case GCC_BLSP1_UART2_APPS_CLK: /* UART2 */ return clk_init_uart(priv); break; default: diff --git a/drivers/phy/qcom/msm8916-usbh-phy.c b/drivers/phy/qcom/msm8916-usbh-phy.c index 7c9d030a4d8a..f52046f7cb02 100644 --- a/drivers/phy/qcom/msm8916-usbh-phy.c +++ b/drivers/phy/qcom/msm8916-usbh-phy.c @@ -74,7 +74,7 @@ static int msm_phy_probe(struct udevice *dev) { struct msm_phy_priv *priv = dev_get_priv(dev); - priv->regs = dev_remap_addr(dev); + priv->regs = dev_remap_addr(dev_get_parent(dev)); if (!priv->regs) return -EINVAL; @@ -96,7 +96,7 @@ static struct phy_ops msm_phy_ops = { }; static const struct udevice_id msm_phy_ids[] = { - { .compatible = "qcom,apq8016-usbphy" }, + { .compatible = "qcom,usb-hs-phy-msm8916" }, { } }; diff --git a/drivers/pinctrl/qcom/pinctrl-apq8016.c b/drivers/pinctrl/qcom/pinctrl-apq8016.c index 8149ffd83cc4..8e698085d78b 100644 --- a/drivers/pinctrl/qcom/pinctrl-apq8016.c +++ b/drivers/pinctrl/qcom/pinctrl-apq8016.c @@ -29,7 +29,7 @@ static const char * const msm_pinctrl_pins[] = { }; static const struct pinctrl_function msm_pinctrl_functions[] = { - {"blsp1_uart", 2}, + {"blsp_uart2", 2}, }; static const char *apq8016_get_function_name(struct udevice *dev, diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c index dd0d153500cb..25960453beae 100644 --- a/drivers/usb/host/ehci-msm.c +++ b/drivers/usb/host/ehci-msm.c @@ -9,6 +9,7 @@ #include #include +#include #include #include #include @@ -119,6 +120,26 @@ static int ehci_usb_of_to_plat(struct udevice *dev) return 0; } +static int ehci_usb_of_bind(struct udevice *dev) +{ + ofnode ulpi_node = ofnode_first_subnode(dev_ofnode(dev)); + ofnode phy_node; + + if (!ofnode_valid(ulpi_node)) + return 0; + + phy_node = ofnode_first_subnode(ulpi_node); + if (!ofnode_valid(phy_node)) { + printf("%s: ulpi subnode with no phy\n", __func__); + return -ENOENT; + } + + return device_bind_driver_to_node(dev, "msm8916_usbphy", "msm8916_usbphy", + phy_node, NULL); + + return 0; +} + #if defined(CONFIG_CI_UDC) /* Little quirk that MSM needs with Chipidea controller * Must reinit phy after reset @@ -132,7 +153,7 @@ void ci_init_after_reset(struct ehci_ctrl *ctrl) #endif static const struct udevice_id ehci_usb_ids[] = { - { .compatible = "qcom,ehci-host", }, + { .compatible = "qcom,ci-hdrc", }, { } }; @@ -141,6 +162,7 @@ U_BOOT_DRIVER(usb_ehci) = { .id = UCLASS_USB, .of_match = ehci_usb_ids, .of_to_plat = ehci_usb_of_to_plat, + .bind = ehci_usb_of_bind, .probe = ehci_usb_probe, .remove = ehci_usb_remove, .ops = &ehci_usb_ops, diff --git a/include/dt-bindings/clock/qcom,gcc-msm8916.h b/include/dt-bindings/clock/qcom,gcc-msm8916.h new file mode 100644 index 000000000000..563034406184 --- /dev/null +++ b/include/dt-bindings/clock/qcom,gcc-msm8916.h @@ -0,0 +1,179 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright 2015 Linaro Limited + */ + +#ifndef _DT_BINDINGS_CLK_MSM_GCC_8916_H +#define _DT_BINDINGS_CLK_MSM_GCC_8916_H + +#define GPLL0 0 +#define GPLL0_VOTE 1 +#define BIMC_PLL 2 +#define BIMC_PLL_VOTE 3 +#define GPLL1 4 +#define GPLL1_VOTE 5 +#define GPLL2 6 +#define GPLL2_VOTE 7 +#define PCNOC_BFDCD_CLK_SRC 8 +#define SYSTEM_NOC_BFDCD_CLK_SRC 9 +#define CAMSS_AHB_CLK_SRC 10 +#define APSS_AHB_CLK_SRC 11 +#define CSI0_CLK_SRC 12 +#define CSI1_CLK_SRC 13 +#define GFX3D_CLK_SRC 14 +#define VFE0_CLK_SRC 15 +#define BLSP1_QUP1_I2C_APPS_CLK_SRC 16 +#define BLSP1_QUP1_SPI_APPS_CLK_SRC 17 +#define BLSP1_QUP2_I2C_APPS_CLK_SRC 18 +#define BLSP1_QUP2_SPI_APPS_CLK_SRC 19 +#define BLSP1_QUP3_I2C_APPS_CLK_SRC 20 +#define BLSP1_QUP3_SPI_APPS_CLK_SRC 21 +#define BLSP1_QUP4_I2C_APPS_CLK_SRC 22 +#define BLSP1_QUP4_SPI_APPS_CLK_SRC 23 +#define BLSP1_QUP5_I2C_APPS_CLK_SRC 24 +#define BLSP1_QUP5_SPI_APPS_CLK_SRC 25 +#define BLSP1_QUP6_I2C_APPS_CLK_SRC 26 +#define BLSP1_QUP6_SPI_APPS_CLK_SRC 27 +#define BLSP1_UART1_APPS_CLK_SRC 28 +#define BLSP1_UART2_APPS_CLK_SRC 29 +#define CCI_CLK_SRC 30 +#define CAMSS_GP0_CLK_SRC 31 +#define CAMSS_GP1_CLK_SRC 32 +#define JPEG0_CLK_SRC 33 +#define MCLK0_CLK_SRC 34 +#define MCLK1_CLK_SRC 35 +#define CSI0PHYTIMER_CLK_SRC 36 +#define CSI1PHYTIMER_CLK_SRC 37 +#define CPP_CLK_SRC 38 +#define CRYPTO_CLK_SRC 39 +#define GP1_CLK_SRC 40 +#define GP2_CLK_SRC 41 +#define GP3_CLK_SRC 42 +#define BYTE0_CLK_SRC 43 +#define ESC0_CLK_SRC 44 +#define MDP_CLK_SRC 45 +#define PCLK0_CLK_SRC 46 +#define VSYNC_CLK_SRC 47 +#define PDM2_CLK_SRC 48 +#define SDCC1_APPS_CLK_SRC 49 +#define SDCC2_APPS_CLK_SRC 50 +#define APSS_TCU_CLK_SRC 51 +#define USB_HS_SYSTEM_CLK_SRC 52 +#define VCODEC0_CLK_SRC 53 +#define GCC_BLSP1_AHB_CLK 54 +#define GCC_BLSP1_SLEEP_CLK 55 +#define GCC_BLSP1_QUP1_I2C_APPS_CLK 56 +#define GCC_BLSP1_QUP1_SPI_APPS_CLK 57 +#define GCC_BLSP1_QUP2_I2C_APPS_CLK 58 +#define GCC_BLSP1_QUP2_SPI_APPS_CLK 59 +#define GCC_BLSP1_QUP3_I2C_APPS_CLK 60 +#define GCC_BLSP1_QUP3_SPI_APPS_CLK 61 +#define GCC_BLSP1_QUP4_I2C_APPS_CLK 62 +#define GCC_BLSP1_QUP4_SPI_APPS_CLK 63 +#define GCC_BLSP1_QUP5_I2C_APPS_CLK 64 +#define GCC_BLSP1_QUP5_SPI_APPS_CLK 65 +#define GCC_BLSP1_QUP6_I2C_APPS_CLK 66 +#define GCC_BLSP1_QUP6_SPI_APPS_CLK 67 +#define GCC_BLSP1_UART1_APPS_CLK 68 +#define GCC_BLSP1_UART2_APPS_CLK 69 +#define GCC_BOOT_ROM_AHB_CLK 70 +#define GCC_CAMSS_CCI_AHB_CLK 71 +#define GCC_CAMSS_CCI_CLK 72 +#define GCC_CAMSS_CSI0_AHB_CLK 73 +#define GCC_CAMSS_CSI0_CLK 74 +#define GCC_CAMSS_CSI0PHY_CLK 75 +#define GCC_CAMSS_CSI0PIX_CLK 76 +#define GCC_CAMSS_CSI0RDI_CLK 77 +#define GCC_CAMSS_CSI1_AHB_CLK 78 +#define GCC_CAMSS_CSI1_CLK 79 +#define GCC_CAMSS_CSI1PHY_CLK 80 +#define GCC_CAMSS_CSI1PIX_CLK 81 +#define GCC_CAMSS_CSI1RDI_CLK 82 +#define GCC_CAMSS_CSI_VFE0_CLK 83 +#define GCC_CAMSS_GP0_CLK 84 +#define GCC_CAMSS_GP1_CLK 85 +#define GCC_CAMSS_ISPIF_AHB_CLK 86 +#define GCC_CAMSS_JPEG0_CLK 87 +#define GCC_CAMSS_JPEG_AHB_CLK 88 +#define GCC_CAMSS_JPEG_AXI_CLK 89 +#define GCC_CAMSS_MCLK0_CLK 90 +#define GCC_CAMSS_MCLK1_CLK 91 +#define GCC_CAMSS_MICRO_AHB_CLK 92 +#define GCC_CAMSS_CSI0PHYTIMER_CLK 93 +#define GCC_CAMSS_CSI1PHYTIMER_CLK 94 +#define GCC_CAMSS_AHB_CLK 95 +#define GCC_CAMSS_TOP_AHB_CLK 96 +#define GCC_CAMSS_CPP_AHB_CLK 97 +#define GCC_CAMSS_CPP_CLK 98 +#define GCC_CAMSS_VFE0_CLK 99 +#define GCC_CAMSS_VFE_AHB_CLK 100 +#define GCC_CAMSS_VFE_AXI_CLK 101 +#define GCC_CRYPTO_AHB_CLK 102 +#define GCC_CRYPTO_AXI_CLK 103 +#define GCC_CRYPTO_CLK 104 +#define GCC_OXILI_GMEM_CLK 105 +#define GCC_GP1_CLK 106 +#define GCC_GP2_CLK 107 +#define GCC_GP3_CLK 108 +#define GCC_MDSS_AHB_CLK 109 +#define GCC_MDSS_AXI_CLK 110 +#define GCC_MDSS_BYTE0_CLK 111 +#define GCC_MDSS_ESC0_CLK 112 +#define GCC_MDSS_MDP_CLK 113 +#define GCC_MDSS_PCLK0_CLK 114 +#define GCC_MDSS_VSYNC_CLK 115 +#define GCC_MSS_CFG_AHB_CLK 116 +#define GCC_OXILI_AHB_CLK 117 +#define GCC_OXILI_GFX3D_CLK 118 +#define GCC_PDM2_CLK 119 +#define GCC_PDM_AHB_CLK 120 +#define GCC_PRNG_AHB_CLK 121 +#define GCC_SDCC1_AHB_CLK 122 +#define GCC_SDCC1_APPS_CLK 123 +#define GCC_SDCC2_AHB_CLK 124 +#define GCC_SDCC2_APPS_CLK 125 +#define GCC_GTCU_AHB_CLK 126 +#define GCC_JPEG_TBU_CLK 127 +#define GCC_MDP_TBU_CLK 128 +#define GCC_SMMU_CFG_CLK 129 +#define GCC_VENUS_TBU_CLK 130 +#define GCC_VFE_TBU_CLK 131 +#define GCC_USB2A_PHY_SLEEP_CLK 132 +#define GCC_USB_HS_AHB_CLK 133 +#define GCC_USB_HS_SYSTEM_CLK 134 +#define GCC_VENUS0_AHB_CLK 135 +#define GCC_VENUS0_AXI_CLK 136 +#define GCC_VENUS0_VCODEC0_CLK 137 +#define BIMC_DDR_CLK_SRC 138 +#define GCC_APSS_TCU_CLK 139 +#define GCC_GFX_TCU_CLK 140 +#define BIMC_GPU_CLK_SRC 141 +#define GCC_BIMC_GFX_CLK 142 +#define GCC_BIMC_GPU_CLK 143 +#define ULTAUDIO_LPAIF_PRI_I2S_CLK_SRC 144 +#define ULTAUDIO_LPAIF_SEC_I2S_CLK_SRC 145 +#define ULTAUDIO_LPAIF_AUX_I2S_CLK_SRC 146 +#define ULTAUDIO_XO_CLK_SRC 147 +#define ULTAUDIO_AHBFABRIC_CLK_SRC 148 +#define CODEC_DIGCODEC_CLK_SRC 149 +#define GCC_ULTAUDIO_PCNOC_MPORT_CLK 150 +#define GCC_ULTAUDIO_PCNOC_SWAY_CLK 151 +#define GCC_ULTAUDIO_AVSYNC_XO_CLK 152 +#define GCC_ULTAUDIO_STC_XO_CLK 153 +#define GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK 154 +#define GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_LPM_CLK 155 +#define GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK 156 +#define GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK 157 +#define GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK 158 +#define GCC_CODEC_DIGCODEC_CLK 159 +#define GCC_MSS_Q6_BIMC_AXI_CLK 160 + +/* Indexes for GDSCs */ +#define BIMC_GDSC 0 +#define VENUS_GDSC 1 +#define MDSS_GDSC 2 +#define JPEG_GDSC 3 +#define VFE_GDSC 4 +#define OXILI_GDSC 5 + +#endif