diff mbox series

[v3,3/8] scripts/Makefile.lib: Statically define *-u-boot.dtsi files location

Message ID 20231228115804.3626579-4-sumit.garg@linaro.org
State Superseded
Headers show
Series An effort to bring DT bindings compliance within U-Boot | expand

Commit Message

Sumit Garg Dec. 28, 2023, 11:57 a.m. UTC 
Allow u-boot to build DTB from a different directory tree such that
*-u-boot.dtsi files can be included from a common location. Currently
that location is arch/$(ARCH)/dts/, so statically define that common
location.

This is needed for platform owners to start building DTB files from
devicetree-rebasing directory but still being able to include
*-u-boot.dtsi files.

Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
---

Changes in v3:
--------------
- Picked up review tags

Changes in v2:
--------------
- s/UBOOT_DTSI_LOC/u_boot_dtsi_loc/

 scripts/Makefile.lib | 25 ++++++++++++++-----------
 1 file changed, 14 insertions(+), 11 deletions(-)

Comments

Bryan Brattlof Jan. 5, 2024, 8:41 p.m. UTC | #1 
Hi Sumit!

On December 28, 2023 thus sayeth Sumit Garg:
> Allow u-boot to build DTB from a different directory tree such that
> *-u-boot.dtsi files can be included from a common location. Currently
> that location is arch/$(ARCH)/dts/, so statically define that common
> location.
> 
> This is needed for platform owners to start building DTB files from
> devicetree-rebasing directory but still being able to include
> *-u-boot.dtsi files.
> 
> Reviewed-by: Tom Rini <trini@konsulko.com>
> Reviewed-by: Simon Glass <sjg@chromium.org>
> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
> Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
> ---
> 

...

> 
> diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
> index 27b9437027c..09330421856 100644
> --- a/scripts/Makefile.lib
> +++ b/scripts/Makefile.lib

...

>  # Uncomment for debugging
> @@ -190,6 +192,7 @@ dtsi_include_list += $(CONFIG_DEVICE_TREE_INCLUDES)
>  dtc_cpp_flags  = -Wp,-MD,$(depfile).pre.tmp -nostdinc                    \
>  		 $(UBOOTINCLUDE)                                         \
>  		 -I$(dir $<)                                             \
> +		 -I$(u_boot_dtsi_loc)                                     \
>  		 -I$(srctree)/arch/$(ARCH)/dts/include                   \
>  		 -I$(srctree)/include                                    \
>  		 -D__ASSEMBLY__                                          \
> @@ -328,7 +331,7 @@ cmd_dtc = mkdir -p $(dir ${dtc-tmp}) ; \
>  	  echo '$(pound)include "$(f)"' >> $(pre-tmp);) \
>  	$(HOSTCC) -E $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $(pre-tmp) ; \
>  	$(DTC) -O dtb -o $@ -b 0 \
> -		-i $(dir $<) $(DTC_FLAGS) \
> +		-i $(dir $<) -i $(u_boot_dtsi_loc) $(DTC_FLAGS) \
>  		-d $(depfile).dtc.tmp $(dtc-tmp) || \
>  		(echo "Check $(shell pwd)/$(pre-tmp) for errors" && false) \
>  		; \

One of the issues I see with having a separate OF_UPSTREAM and U-Boot dt 
directory is when we have U-Boot board files that use dtsi files in the 
OF_UPSTREAM folder.

For example our reference boards uses the primary bootloader's dtb (eg: 
k3-am62a7-r5-sk.dts) which #includes the k3-am62a7-sk.dts that will be 
found in the OF_UPSTREAM directory and modifies it to give it the 
perspective of the micro-controller it will be running on during boot.

What do you think if we have both paths included regardless if 
OF_UPSTREAM is selected or not? IDK if this will break anyone else

~Bryan
Sumit Garg Jan. 8, 2024, 7:18 a.m. UTC | #2 
Hi Bryan,

On Sat, 6 Jan 2024 at 02:12, Bryan Brattlof <bb@ti.com> wrote:
>
> Hi Sumit!
>
> On December 28, 2023 thus sayeth Sumit Garg:
> > Allow u-boot to build DTB from a different directory tree such that
> > *-u-boot.dtsi files can be included from a common location. Currently
> > that location is arch/$(ARCH)/dts/, so statically define that common
> > location.
> >
> > This is needed for platform owners to start building DTB files from
> > devicetree-rebasing directory but still being able to include
> > *-u-boot.dtsi files.
> >
> > Reviewed-by: Tom Rini <trini@konsulko.com>
> > Reviewed-by: Simon Glass <sjg@chromium.org>
> > Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
> > Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
> > ---
> >
>
> ...
>
> >
> > diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
> > index 27b9437027c..09330421856 100644
> > --- a/scripts/Makefile.lib
> > +++ b/scripts/Makefile.lib
>
> ...
>
> >  # Uncomment for debugging
> > @@ -190,6 +192,7 @@ dtsi_include_list += $(CONFIG_DEVICE_TREE_INCLUDES)
> >  dtc_cpp_flags  = -Wp,-MD,$(depfile).pre.tmp -nostdinc                    \
> >                $(UBOOTINCLUDE)                                         \
> >                -I$(dir $<)                                             \
> > +              -I$(u_boot_dtsi_loc)                                     \
> >                -I$(srctree)/arch/$(ARCH)/dts/include                   \
> >                -I$(srctree)/include                                    \
> >                -D__ASSEMBLY__                                          \
> > @@ -328,7 +331,7 @@ cmd_dtc = mkdir -p $(dir ${dtc-tmp}) ; \
> >         echo '$(pound)include "$(f)"' >> $(pre-tmp);) \
> >       $(HOSTCC) -E $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $(pre-tmp) ; \
> >       $(DTC) -O dtb -o $@ -b 0 \
> > -             -i $(dir $<) $(DTC_FLAGS) \
> > +             -i $(dir $<) -i $(u_boot_dtsi_loc) $(DTC_FLAGS) \
> >               -d $(depfile).dtc.tmp $(dtc-tmp) || \
> >               (echo "Check $(shell pwd)/$(pre-tmp) for errors" && false) \
> >               ; \
>
> One of the issues I see with having a separate OF_UPSTREAM and U-Boot dt
> directory is when we have U-Boot board files that use dtsi files in the
> OF_UPSTREAM folder.
>
> For example our reference boards uses the primary bootloader's dtb (eg:
> k3-am62a7-r5-sk.dts) which #includes the k3-am62a7-sk.dts that will be
> found in the OF_UPSTREAM directory and modifies it to give it the
> perspective of the micro-controller it will be running on during boot.

Thanks for bringing this up. I have been playing with the idea to
reuse DT includes from upstream.

>
> What do you think if we have both paths included regardless if
> OF_UPSTREAM is selected or not? IDK if this will break anyone else

Sure, we should be able to do that if we maintain the correct order of
include paths as per following patch [1]. If this works for you let me
know and I will include it for v4.

[1]

commit 7fcebc044c69c57b43ff0e59f2d8c3713bc68b6c
Author: Sumit Garg <sumit.garg@linaro.org>
Date:   Tue Jan 2 19:20:01 2024 +0530

    Makefile: Allow upstream DT subtree to provide DT includes

    Allow platforms to reuse DT headers and dtsi includes directly form
    upstream DT subtree which will be frequently synced with Linux kernel.
    This will further allow us to drop corresponding DT includes copy from
    U-Boot tree.

    Also, since the DT includes from upstream DT subtree are done after DT
    includes from U-Boot tree, so it shouldn't cause any conflicts.

    Signed-off-by: Sumit Garg <sumit.garg@linaro.org>

diff --git a/Makefile b/Makefile
index d8d168cd4c3..0160e827a29 100644
--- a/Makefile
+++ b/Makefile
@@ -834,7 +834,8 @@ UBOOTINCLUDE    := \
                                -I$(srctree)/arch/arm/thumb1/include), \
                        -I$(srctree)/arch/arm/thumb1/include)) \
        -I$(srctree)/arch/$(ARCH)/include \
-       -include $(srctree)/include/linux/kconfig.h
+       -include $(srctree)/include/linux/kconfig.h \
+       -I$(srctree)/devicetree-rebasing/include

 NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)

diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 09330421856..30033092597 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -189,12 +189,17 @@ dtsi_include_list = $(strip $(u_boot_dtsi_options_debug) \
 dtsi_include_list += $(CONFIG_DEVICE_TREE_INCLUDES)

 # Modified for U-Boot
+upstream_dtsi_include = $(addprefix -I, $(srctree)/devicetree-rebasing/src/ \
+       $(sort $(dir $(wildcard
$(srctree)/devicetree-rebasing/src/$(ARCH)/*/*))) \
+       $(if (CONFIG_ARM64), \
+                $(sort $(dir $(wildcard
$(srctree)/devicetree-rebasing/src/arm64/*/*)))))
 dtc_cpp_flags  = -Wp,-MD,$(depfile).pre.tmp -nostdinc                    \
                 $(UBOOTINCLUDE)                                         \
                 -I$(dir $<)                                             \
                 -I$(u_boot_dtsi_loc)                                     \
                 -I$(srctree)/arch/$(ARCH)/dts/include                   \
                 -I$(srctree)/include                                    \
+                $(upstream_dtsi_include)                                \
                 -D__ASSEMBLY__                                          \
                 -undef -D__DTS__

-Sumit
Bryan Brattlof Jan. 9, 2024, 1:54 a.m. UTC | #3 
On January  8, 2024 thus sayeth Sumit Garg:
> Hi Bryan,
> 
> On Sat, 6 Jan 2024 at 02:12, Bryan Brattlof <bb@ti.com> wrote:
> >
> > Hi Sumit!
> >
> > On December 28, 2023 thus sayeth Sumit Garg:
> > > Allow u-boot to build DTB from a different directory tree such that
> > > *-u-boot.dtsi files can be included from a common location. Currently
> > > that location is arch/$(ARCH)/dts/, so statically define that common
> > > location.
> > >
> > > This is needed for platform owners to start building DTB files from
> > > devicetree-rebasing directory but still being able to include
> > > *-u-boot.dtsi files.
> > >
> > > Reviewed-by: Tom Rini <trini@konsulko.com>
> > > Reviewed-by: Simon Glass <sjg@chromium.org>
> > > Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
> > > Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
> > > ---
> > >
> >
> > ...
> >
> > >
> > > diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
> > > index 27b9437027c..09330421856 100644
> > > --- a/scripts/Makefile.lib
> > > +++ b/scripts/Makefile.lib
> >
> > ...
> >
> > >  # Uncomment for debugging
> > > @@ -190,6 +192,7 @@ dtsi_include_list += $(CONFIG_DEVICE_TREE_INCLUDES)
> > >  dtc_cpp_flags  = -Wp,-MD,$(depfile).pre.tmp -nostdinc                    \
> > >                $(UBOOTINCLUDE)                                         \
> > >                -I$(dir $<)                                             \
> > > +              -I$(u_boot_dtsi_loc)                                     \
> > >                -I$(srctree)/arch/$(ARCH)/dts/include                   \
> > >                -I$(srctree)/include                                    \
> > >                -D__ASSEMBLY__                                          \
> > > @@ -328,7 +331,7 @@ cmd_dtc = mkdir -p $(dir ${dtc-tmp}) ; \
> > >         echo '$(pound)include "$(f)"' >> $(pre-tmp);) \
> > >       $(HOSTCC) -E $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $(pre-tmp) ; \
> > >       $(DTC) -O dtb -o $@ -b 0 \
> > > -             -i $(dir $<) $(DTC_FLAGS) \
> > > +             -i $(dir $<) -i $(u_boot_dtsi_loc) $(DTC_FLAGS) \
> > >               -d $(depfile).dtc.tmp $(dtc-tmp) || \
> > >               (echo "Check $(shell pwd)/$(pre-tmp) for errors" && false) \
> > >               ; \
> >
> > One of the issues I see with having a separate OF_UPSTREAM and U-Boot dt
> > directory is when we have U-Boot board files that use dtsi files in the
> > OF_UPSTREAM folder.
> >
> > For example our reference boards uses the primary bootloader's dtb (eg:
> > k3-am62a7-r5-sk.dts) which #includes the k3-am62a7-sk.dts that will be
> > found in the OF_UPSTREAM directory and modifies it to give it the
> > perspective of the micro-controller it will be running on during boot.
> 
> Thanks for bringing this up. I have been playing with the idea to
> reuse DT includes from upstream.
> 
> >
> > What do you think if we have both paths included regardless if
> > OF_UPSTREAM is selected or not? IDK if this will break anyone else
> 
> Sure, we should be able to do that if we maintain the correct order of
> include paths as per following patch [1]. If this works for you let me
> know and I will include it for v4.
> 

This works beautifully.

I did have to hack around to get Makefile.spl working but this is headed 
in the right direction for me :)

Thank you
~Bryan
Sumit Garg Jan. 9, 2024, 5:08 a.m. UTC | #4 
On Tue, 9 Jan 2024 at 07:24, Bryan Brattlof <bb@ti.com> wrote:
>
> On January  8, 2024 thus sayeth Sumit Garg:
> > Hi Bryan,
> >
> > On Sat, 6 Jan 2024 at 02:12, Bryan Brattlof <bb@ti.com> wrote:
> > >
> > > Hi Sumit!
> > >
> > > On December 28, 2023 thus sayeth Sumit Garg:
> > > > Allow u-boot to build DTB from a different directory tree such that
> > > > *-u-boot.dtsi files can be included from a common location. Currently
> > > > that location is arch/$(ARCH)/dts/, so statically define that common
> > > > location.
> > > >
> > > > This is needed for platform owners to start building DTB files from
> > > > devicetree-rebasing directory but still being able to include
> > > > *-u-boot.dtsi files.
> > > >
> > > > Reviewed-by: Tom Rini <trini@konsulko.com>
> > > > Reviewed-by: Simon Glass <sjg@chromium.org>
> > > > Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
> > > > Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
> > > > ---
> > > >
> > >
> > > ...
> > >
> > > >
> > > > diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
> > > > index 27b9437027c..09330421856 100644
> > > > --- a/scripts/Makefile.lib
> > > > +++ b/scripts/Makefile.lib
> > >
> > > ...
> > >
> > > >  # Uncomment for debugging
> > > > @@ -190,6 +192,7 @@ dtsi_include_list += $(CONFIG_DEVICE_TREE_INCLUDES)
> > > >  dtc_cpp_flags  = -Wp,-MD,$(depfile).pre.tmp -nostdinc                    \
> > > >                $(UBOOTINCLUDE)                                         \
> > > >                -I$(dir $<)                                             \
> > > > +              -I$(u_boot_dtsi_loc)                                     \
> > > >                -I$(srctree)/arch/$(ARCH)/dts/include                   \
> > > >                -I$(srctree)/include                                    \
> > > >                -D__ASSEMBLY__                                          \
> > > > @@ -328,7 +331,7 @@ cmd_dtc = mkdir -p $(dir ${dtc-tmp}) ; \
> > > >         echo '$(pound)include "$(f)"' >> $(pre-tmp);) \
> > > >       $(HOSTCC) -E $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $(pre-tmp) ; \
> > > >       $(DTC) -O dtb -o $@ -b 0 \
> > > > -             -i $(dir $<) $(DTC_FLAGS) \
> > > > +             -i $(dir $<) -i $(u_boot_dtsi_loc) $(DTC_FLAGS) \
> > > >               -d $(depfile).dtc.tmp $(dtc-tmp) || \
> > > >               (echo "Check $(shell pwd)/$(pre-tmp) for errors" && false) \
> > > >               ; \
> > >
> > > One of the issues I see with having a separate OF_UPSTREAM and U-Boot dt
> > > directory is when we have U-Boot board files that use dtsi files in the
> > > OF_UPSTREAM folder.
> > >
> > > For example our reference boards uses the primary bootloader's dtb (eg:
> > > k3-am62a7-r5-sk.dts) which #includes the k3-am62a7-sk.dts that will be
> > > found in the OF_UPSTREAM directory and modifies it to give it the
> > > perspective of the micro-controller it will be running on during boot.
> >
> > Thanks for bringing this up. I have been playing with the idea to
> > reuse DT includes from upstream.
> >
> > >
> > > What do you think if we have both paths included regardless if
> > > OF_UPSTREAM is selected or not? IDK if this will break anyone else
> >
> > Sure, we should be able to do that if we maintain the correct order of
> > include paths as per following patch [1]. If this works for you let me
> > know and I will include it for v4.
> >
>
> This works beautifully.
>
> I did have to hack around to get Makefile.spl working but this is headed
> in the right direction for me :)

Thanks for testing. I hope I can take that as a tested-by tag for this patch.

-Sumit

>
> Thank you
> ~Bryan
Bryan Brattlof Jan. 9, 2024, 2:26 p.m. UTC | #5 
On January  9, 2024 thus sayeth Sumit Garg:
> On Tue, 9 Jan 2024 at 07:24, Bryan Brattlof <bb@ti.com> wrote:
> >
> > On January  8, 2024 thus sayeth Sumit Garg:
> > > Hi Bryan,
> > >
> > > On Sat, 6 Jan 2024 at 02:12, Bryan Brattlof <bb@ti.com> wrote:
> > > >
> > > > Hi Sumit!
> > > >
> > > > On December 28, 2023 thus sayeth Sumit Garg:
> > > > > Allow u-boot to build DTB from a different directory tree such that
> > > > > *-u-boot.dtsi files can be included from a common location. Currently
> > > > > that location is arch/$(ARCH)/dts/, so statically define that common
> > > > > location.
> > > > >
> > > > > This is needed for platform owners to start building DTB files from
> > > > > devicetree-rebasing directory but still being able to include
> > > > > *-u-boot.dtsi files.
> > > > >
> > > > > Reviewed-by: Tom Rini <trini@konsulko.com>
> > > > > Reviewed-by: Simon Glass <sjg@chromium.org>
> > > > > Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
> > > > > Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
> > > > > ---
> > > > >
> > > >
> > > > ...
> > > >
> > > > >
> > > > > diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
> > > > > index 27b9437027c..09330421856 100644
> > > > > --- a/scripts/Makefile.lib
> > > > > +++ b/scripts/Makefile.lib
> > > >
> > > > ...
> > > >
> > > > >  # Uncomment for debugging
> > > > > @@ -190,6 +192,7 @@ dtsi_include_list += $(CONFIG_DEVICE_TREE_INCLUDES)
> > > > >  dtc_cpp_flags  = -Wp,-MD,$(depfile).pre.tmp -nostdinc                    \
> > > > >                $(UBOOTINCLUDE)                                         \
> > > > >                -I$(dir $<)                                             \
> > > > > +              -I$(u_boot_dtsi_loc)                                     \
> > > > >                -I$(srctree)/arch/$(ARCH)/dts/include                   \
> > > > >                -I$(srctree)/include                                    \
> > > > >                -D__ASSEMBLY__                                          \
> > > > > @@ -328,7 +331,7 @@ cmd_dtc = mkdir -p $(dir ${dtc-tmp}) ; \
> > > > >         echo '$(pound)include "$(f)"' >> $(pre-tmp);) \
> > > > >       $(HOSTCC) -E $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $(pre-tmp) ; \
> > > > >       $(DTC) -O dtb -o $@ -b 0 \
> > > > > -             -i $(dir $<) $(DTC_FLAGS) \
> > > > > +             -i $(dir $<) -i $(u_boot_dtsi_loc) $(DTC_FLAGS) \
> > > > >               -d $(depfile).dtc.tmp $(dtc-tmp) || \
> > > > >               (echo "Check $(shell pwd)/$(pre-tmp) for errors" && false) \
> > > > >               ; \
> > > >
> > > > One of the issues I see with having a separate OF_UPSTREAM and U-Boot dt
> > > > directory is when we have U-Boot board files that use dtsi files in the
> > > > OF_UPSTREAM folder.
> > > >
> > > > For example our reference boards uses the primary bootloader's dtb (eg:
> > > > k3-am62a7-r5-sk.dts) which #includes the k3-am62a7-sk.dts that will be
> > > > found in the OF_UPSTREAM directory and modifies it to give it the
> > > > perspective of the micro-controller it will be running on during boot.
> > >
> > > Thanks for bringing this up. I have been playing with the idea to
> > > reuse DT includes from upstream.
> > >
> > > >
> > > > What do you think if we have both paths included regardless if
> > > > OF_UPSTREAM is selected or not? IDK if this will break anyone else
> > >
> > > Sure, we should be able to do that if we maintain the correct order of
> > > include paths as per following patch [1]. If this works for you let me
> > > know and I will include it for v4.
> > >
> >
> > This works beautifully.
> >
> > I did have to hack around to get Makefile.spl working but this is headed
> > in the right direction for me :)
> 
> Thanks for testing. I hope I can take that as a tested-by tag for this patch.
> 

Absolutely 

Tested-by: Bryan Brattlof <bb@ti.com>

~Bryan
diff mbox series

Patch

diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 27b9437027c..09330421856 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -159,18 +159,20 @@  cpp_flags      = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(UBOOTINCLUDE)     \
 ld_flags       = $(KBUILD_LDFLAGS) $(ldflags-y) $(LDFLAGS_$(@F))
 
 # Try these files in order to find the U-Boot-specific .dtsi include file
-u_boot_dtsi_options = $(strip $(wildcard $(dir $<)$(basename $(notdir $<))-u-boot.dtsi) \
-	$(wildcard $(dir $<)$(subst $\",,$(CONFIG_SYS_SOC))-u-boot.dtsi) \
-	$(wildcard $(dir $<)$(subst $\",,$(CONFIG_SYS_CPU))-u-boot.dtsi) \
-	$(wildcard $(dir $<)$(subst $\",,$(CONFIG_SYS_VENDOR))-u-boot.dtsi) \
-	$(wildcard $(dir $<)u-boot.dtsi))
+u_boot_dtsi_loc = $(srctree)/arch/$(ARCH)/dts/
+
+u_boot_dtsi_options = $(strip $(wildcard $(u_boot_dtsi_loc)$(basename $(notdir $<))-u-boot.dtsi) \
+	$(wildcard $(u_boot_dtsi_loc)$(subst $\",,$(CONFIG_SYS_SOC))-u-boot.dtsi) \
+	$(wildcard $(u_boot_dtsi_loc)$(subst $\",,$(CONFIG_SYS_CPU))-u-boot.dtsi) \
+	$(wildcard $(u_boot_dtsi_loc)$(subst $\",,$(CONFIG_SYS_VENDOR))-u-boot.dtsi) \
+	$(wildcard $(u_boot_dtsi_loc)u-boot.dtsi))
 
 u_boot_dtsi_options_raw = $(warning Automatic .dtsi inclusion: options: \
-	$(dir $<)$(basename $(notdir $<))-u-boot.dtsi \
-	$(dir $<)$(subst $\",,$(CONFIG_SYS_SOC))-u-boot.dtsi \
-	$(dir $<)$(subst $\",,$(CONFIG_SYS_CPU))-u-boot.dtsi \
-	$(dir $<)$(subst $\",,$(CONFIG_SYS_VENDOR))-u-boot.dtsi \
-	$(dir $<)u-boot.dtsi ... \
+	$(u_boot_dtsi_loc)$(basename $(notdir $<))-u-boot.dtsi \
+	$(u_boot_dtsi_loc)$(subst $\",,$(CONFIG_SYS_SOC))-u-boot.dtsi \
+	$(u_boot_dtsi_loc)$(subst $\",,$(CONFIG_SYS_CPU))-u-boot.dtsi \
+	$(u_boot_dtsi_loc)$(subst $\",,$(CONFIG_SYS_VENDOR))-u-boot.dtsi \
+	$(u_boot_dtsi_loc)u-boot.dtsi ... \
 	found: $(if $(u_boot_dtsi_options),"$(u_boot_dtsi_options)",nothing!))
 
 # Uncomment for debugging
@@ -190,6 +192,7 @@  dtsi_include_list += $(CONFIG_DEVICE_TREE_INCLUDES)
 dtc_cpp_flags  = -Wp,-MD,$(depfile).pre.tmp -nostdinc                    \
 		 $(UBOOTINCLUDE)                                         \
 		 -I$(dir $<)                                             \
+		 -I$(u_boot_dtsi_loc)                                     \
 		 -I$(srctree)/arch/$(ARCH)/dts/include                   \
 		 -I$(srctree)/include                                    \
 		 -D__ASSEMBLY__                                          \
@@ -328,7 +331,7 @@  cmd_dtc = mkdir -p $(dir ${dtc-tmp}) ; \
 	  echo '$(pound)include "$(f)"' >> $(pre-tmp);) \
 	$(HOSTCC) -E $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $(pre-tmp) ; \
 	$(DTC) -O dtb -o $@ -b 0 \
-		-i $(dir $<) $(DTC_FLAGS) \
+		-i $(dir $<) -i $(u_boot_dtsi_loc) $(DTC_FLAGS) \
 		-d $(depfile).dtc.tmp $(dtc-tmp) || \
 		(echo "Check $(shell pwd)/$(pre-tmp) for errors" && false) \
 		; \