From patchwork Tue Nov 21 17:09:41 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Caleb Connolly X-Patchwork-Id: 745716 Delivered-To: patch@linaro.org Received: by 2002:a5d:5052:0:b0:32d:baff:b0ca with SMTP id h18csp1999169wrt; Tue, 21 Nov 2023 09:12:37 -0800 (PST) X-Google-Smtp-Source: AGHT+IHrlCeetzvxEPzHyYfev70uXeWQ3iQ650snvcb1KbhGZ9+55lEClZPbaG8ABdYAgH/kmwJ9 X-Received: by 2002:aa7:d408:0:b0:53e:3b8f:8ce1 with SMTP id z8-20020aa7d408000000b0053e3b8f8ce1mr2424724edq.23.1700586757635; Tue, 21 Nov 2023 09:12:37 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1700586757; cv=none; d=google.com; s=arc-20160816; b=dLjFLujoNdLhX5yhATCL9kYclrevEULTayEtINd+8rMXYp2lkaZsDtEsfqepajTqps 1btuPv7PzTOKtuC+mtugnAJy3wsR3iBDUBusaIeZoIjZRNAXzd4jylsdFl1lDncKeqQL kliRse6PmqQOCYBNs45ESDQgYjxkszdZcY//iKgHaGyomQWylYo+E8mfWiq0cwY3EFc/ HjwxaYss7KLnTGxJ0becEtBqib4kC8cbxgqhuOXQCAKwbFLpVSPsU5vXILoohna8SB0h fI4xjTeP8NDs9OFLehbo81jKHm+Qd9Mfys3azUboEWc1Wt1HBjS6qfLNYFLYGJA0veY5 QegA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=sender:errors-to:list-subscribe:list-help:list-post:list-archive :list-unsubscribe:list-id:precedence:cc:to:in-reply-to:references :message-id:content-transfer-encoding:mime-version:subject:date:from :dkim-signature; bh=UbyKf1zyIRkpgalkRa8aiLC7inZ7ckn0oPM+uH2H5+U=; fh=GB9E9KzRIiNXhkRWIZbZpSMjbCjxnqnvE8nYuQxq8UI=; b=X0/Nq12oX1Ot4642PceCiNZEeuaGqU5ItpwHVFPoPNKl0CV7NkuomL8Zn23rpSYCKp KaShtcswRmx4AwiktwQGRKfeyqajoqMtHJTu65VBcvpKcqrULAw+3UfxGlqoPhWC6X6N 23cq9EpruU2yxR/rVIGusSu78MsAYUB0tQux5ukCDztzcaJ8YdyHAm7HljrnotBI8yBh 41UNbE5bDlZJFb6WAaA1AAdS1O7dK7yQQrMgTQPY2LIfKfwXpsSDxRf9jawnxZk3VmQv ZsgKXIQ9rP/m3POkYJc0bfuEzrWMHhXOKnibZPxQBheIBbZLJ7+h+nWuCVFq7tp0t0ID wJQg== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=xVA5vldk; spf=pass (google.com: domain of u-boot-bounces@lists.denx.de designates 85.214.62.61 as permitted sender) smtp.mailfrom=u-boot-bounces@lists.denx.de; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from phobos.denx.de (phobos.denx.de. [85.214.62.61]) by mx.google.com with ESMTPS id c69-20020a509fcb000000b0053db43e1e9dsi5754135edf.82.2023.11.21.09.12.37 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 21 Nov 2023 09:12:37 -0800 (PST) Received-SPF: pass (google.com: domain of u-boot-bounces@lists.denx.de designates 85.214.62.61 as permitted sender) client-ip=85.214.62.61; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=xVA5vldk; spf=pass (google.com: domain of u-boot-bounces@lists.denx.de designates 85.214.62.61 as permitted sender) smtp.mailfrom=u-boot-bounces@lists.denx.de; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id E135687618; Tue, 21 Nov 2023 18:10:08 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=pass (2048-bit key; unprotected) header.d=linaro.org header.i=@linaro.org header.b="xVA5vldk"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id 34C6A875FB; Tue, 21 Nov 2023 18:10:05 +0100 (CET) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_NONE,SPF_PASS, T_SCC_BODY_TEXT_LINE autolearn=unavailable autolearn_force=no version=3.4.2 Received: from mail-wm1-x32c.google.com (mail-wm1-x32c.google.com [IPv6:2a00:1450:4864:20::32c]) (using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 43C1487630 for ; Tue, 21 Nov 2023 18:09:48 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=caleb.connolly@linaro.org Received: by mail-wm1-x32c.google.com with SMTP id 5b1f17b1804b1-40b2a8575d9so5869115e9.0 for ; Tue, 21 Nov 2023 09:09:48 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1700586588; x=1701191388; darn=lists.denx.de; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=UbyKf1zyIRkpgalkRa8aiLC7inZ7ckn0oPM+uH2H5+U=; b=xVA5vldkJnnB9CsD6UhEzhdayfmu6oii6SSgTQpwhNp+F/0TME6LzTnj352byzY9Yi LUOJbneuRzaYrfFOMroM2kw+jNQOCV0/WpAbCOReS74U+McxhX4hQl2vaMqx6TDc4/UJ zgX20LWv1FZFcLtxNQWYCBI3T7/PdyyN8caEaFsy40AzFA2Ans7E4hksmE3MRRpx7emC xnL2hokOx6pOjUuqMs0CKNVgpCTUvJRG1rfULcmPJUZDHiFulEDbidwqoBh2fU9j3L/W pgEYonwmJVcYPn/127XAXLtn+iMyHPSWOdWVijn52JembEdhTjhCk/GW705+YeWex+mo Y3bA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1700586588; x=1701191388; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=UbyKf1zyIRkpgalkRa8aiLC7inZ7ckn0oPM+uH2H5+U=; b=lJ/197OT0hsB4MnJH5h+DqfoRnCJWvJOX/acWaY6o3+QyDCItRKF0KI8DS+9kVsc38 4SyrE3ToH6Y4kAibIIM0otMrMs5QhmmtASBuSutUU4B4OhJQ+DoEkk3UEhHiCdKd1SxJ L3t1XvcSLBLaZjbqGtp/6FM3s2WkhozhmeXUzpURuIvqOMqDzPy9pdH5/WCLcuZlbI8Z KOJUwvYt59iBuB39pLbLPYqYe5kHkpuGcBRebJSV+wEJrkXnqli4N5iF8QSEdynEwEqc DCYJQUdG/3Q8Ha50vw6pCYHB2IwetDBRFtYvNZ1sDRdt+cnpSA/Ga6ORb2ZWgvsUhSqK F1zg== X-Gm-Message-State: AOJu0Yyv//kgoBbSpsbE/1891XqYOB52+GztjC262NhdrpNgflfsxM0w gbgCr9s4P0Gp59/KFJWmVYnptA== X-Received: by 2002:a05:600c:310c:b0:401:daf2:2737 with SMTP id g12-20020a05600c310c00b00401daf22737mr7882942wmo.30.1700586587291; Tue, 21 Nov 2023 09:09:47 -0800 (PST) Received: from lion.localdomain ([79.79.179.141]) by smtp.gmail.com with ESMTPSA id 1-20020a05600c230100b003fefb94ccc9sm17345812wmo.11.2023.11.21.09.09.46 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 21 Nov 2023 09:09:46 -0800 (PST) From: Caleb Connolly Date: Tue, 21 Nov 2023 17:09:41 +0000 Subject: [PATCH 18/21] dts: msm8916: import DT from Linux MIME-Version: 1.0 Message-Id: <20231121-b4-qcom-common-target-v1-18-9492198e0c15@linaro.org> References: <20231121-b4-qcom-common-target-v1-0-9492198e0c15@linaro.org> In-Reply-To: <20231121-b4-qcom-common-target-v1-0-9492198e0c15@linaro.org> To: Neil Armstrong , Sumit Garg , Ramon Fried , Dzmitry Sankouski , Caleb Connolly , Peng Fan , Jaehoon Chung , Rayagonda Kokatanur , Lukasz Majewski , Sean Anderson , Jorge Ramirez-Ortiz , Stephan Gerhold Cc: Marek Vasut , u-boot@lists.denx.de X-Mailer: b4 0.13-dev-4bd13 X-Developer-Signature: v=1; a=openpgp-sha256; l=93843; i=caleb.connolly@linaro.org; h=from:subject:message-id; bh=WyKIOBBlMT/ukNzJbqwozhWX2OtiOxl5TNJK0ntro1U=; b=owGbwMvMwCFYaeA6f6eBkTjjabUkhtSYJ+5TUqYk8PVb7Ljf0nyeSTw35fGO2KSViyIO/5zHo yRk/E22o5SFQZCDQVZMkUX8xDLLprWX7TW2L7gAM4eVCWQIAxenAExE5BPD//JC9Y3T2S+71cUe X9XzZMl2nvAzc2bXZyRerhAKul3424iRobk/cV5mYbKoSP4Jw4CkWC2eugNqPxzfbpkYy/QlOs5 gKQA= X-Developer-Key: i=caleb.connolly@linaro.org; a=openpgp; fpr=83B24DA7FE145076BC38BB250CD904EB673A7C47 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de X-Virus-Status: Clean Import the msm8916 devicetree from Linux and adjust the dragonboard410c devicetree to use it. Signed-off-by: Caleb Connolly --- arch/arm/dts/dragonboard410c-uboot.dtsi | 44 - arch/arm/dts/dragonboard410c.dts | 198 +- arch/arm/dts/msm8916-pins.dtsi | 582 ++++++ arch/arm/dts/msm8916-pm8916.dtsi | 76 + arch/arm/dts/msm8916.dtsi | 2194 +++++++++++++++++++++++ arch/arm/dts/pm8916.dtsi | 183 ++ include/dt-bindings/arm/coresight-cti-dt.h | 37 + include/dt-bindings/clock/qcom,rpmcc.h | 174 ++ include/dt-bindings/interconnect/qcom,msm8916.h | 100 ++ include/dt-bindings/reset/qcom,gcc-msm8916.h | 100 ++ 10 files changed, 3484 insertions(+), 204 deletions(-) diff --git a/arch/arm/dts/dragonboard410c-uboot.dtsi b/arch/arm/dts/dragonboard410c-uboot.dtsi deleted file mode 100644 index cec64bf80f99..000000000000 --- a/arch/arm/dts/dragonboard410c-uboot.dtsi +++ /dev/null @@ -1,44 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * U-Boot addition to handle Dragonboard 410c pins - * - * (C) Copyright 2015 Mateusz Kulikowski - */ - -/ { - - smem { - bootph-all; - }; - - soc { - bootph-all; - - pinctrl@1000000 { - bootph-all; - - uart { - bootph-all; - }; - }; - - qcom,gcc@1800000 { - bootph-all; - }; - - serial@78b0000 { - bootph-all; - }; - }; -}; - - -&pm8916_gpios { - usb_hub_reset_pm { - gpios = <&pm8916_gpios 2 0>; - }; - - usb_sw_sel_pm { - gpios = <&pm8916_gpios 3 0>; - }; -}; diff --git a/arch/arm/dts/dragonboard410c.dts b/arch/arm/dts/dragonboard410c.dts index a42b68fee8c0..8933c64e56e5 100644 --- a/arch/arm/dts/dragonboard410c.dts +++ b/arch/arm/dts/dragonboard410c.dts @@ -7,193 +7,40 @@ /dts-v1/; -#include "skeleton64.dtsi" #include +#include "msm8916-pm8916.dtsi" + / { model = "Qualcomm Technologies, Inc. Dragonboard 410c"; compatible = "qcom,apq8016-sbc", "qcom,apq8016"; qcom,msm-id = <0xce 0x0 0xf8 0x0 0xf9 0x0 0xfa 0x0 0xf7 0x0>; qcom,board-id = <0x10018 0x0>; - #address-cells = <0x2>; - #size-cells = <0x2>; aliases { usb0 = "/soc/ehci@78d9000"; + serial0 = &blsp1_uart2; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0 0x80000000 0 0x3da00000>; }; - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - smem_mem: smem_region@86300000 { - reg = <0x0 0x86300000 0x0 0x100000>; - no-map; - }; - }; - chosen { stdout-path = "/soc/serial@78b0000"; }; - smem { - compatible = "qcom,smem"; - memory-region = <&smem_mem>; - qcom,rpm-msg-ram = <&rpm_msg_ram>; - }; - - soc { - #address-cells = <0x1>; - #size-cells = <0x1>; - ranges = <0x0 0x0 0x0 0xffffffff>; - compatible = "simple-bus"; - - rpm_msg_ram: memory@60000 { - compatible = "qcom,rpm-msg-ram"; - reg = <0x60000 0x8000>; - }; - - soc_gpios: pinctrl@1000000 { - compatible = "qcom,msm8916-pinctrl"; - reg = <0x1000000 0x400000>; - gpio-controller; - gpio-count = <122>; - gpio-bank-name="soc"; - #gpio-cells = <2>; - - blsp1_uart: uart { - function = "blsp1_uart"; - pins = "GPIO_4", "GPIO_5"; - drive-strength = <8>; - bias-disable; - }; - }; - clkc: qcom,gcc@1800000 { - compatible = "qcom,gcc-msm8916"; - reg = <0x1800000 0x80000>; - #address-cells = <0x1>; - #size-cells = <0x0>; - #clock-cells = <0x1>; - }; - - serial@78b0000 { - compatible = "qcom,msm-uartdm-v1.4"; - reg = <0x78b0000 0x200>; - clocks = <&clkc 4>; - clock-names = "core"; - pinctrl-names = "uart"; - pinctrl-0 = <&blsp1_uart>; - }; - - ehci@78d9000 { - compatible = "qcom,ci-hdrc"; - reg = <0x78d9000 0x400>; - phys = <&ehci_phy>; - }; - - ehci_phy: ehci_phy@78d9000 { - compatible = "qcom,usb-hs-phy-msm8916"; - reg = <0x78d9000 0x400>; - #phy-cells = <0>; - }; - - sdhci@07824000 { - compatible = "qcom,sdhci-msm-v4"; - reg = <0x7824900 0x11c 0x7824000 0x800>; - bus-width = <0x8>; - index = <0x0>; - non-removable; - clock = <&clkc 0>; - clock-frequency = <100000000>; - }; - - sdhci@07864000 { - compatible = "qcom,sdhci-msm-v4"; - reg = <0x7864900 0x11c 0x7864000 0x800>; - index = <0x1>; - bus-width = <0x4>; - clock = <&clkc 1>; - clock-frequency = <200000000>; - cd-gpios = <&soc_gpios 38 GPIO_ACTIVE_LOW>; - }; - - wcnss { - bt { - compatible="qcom,wcnss-bt"; - }; - - wifi { - compatible="qcom,wcnss-wlan"; - }; - }; - - spmi_bus: spmi@200f000 { - compatible = "qcom,spmi-pmic-arb"; - reg = <0x0200f000 0x001000>, - <0x02400000 0x400000>, - <0x02c00000 0x400000>, - <0x03800000 0x200000>, - <0x0200a000 0x002100>; - reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; - #address-cells = <0x1>; - #size-cells = <0x1>; - pmic0: pm8916@0 { - compatible = "qcom,spmi-pmic"; - reg = <0x0 0x1>; - #address-cells = <0x1>; - #size-cells = <0x1>; - - pon@800 { - compatible = "qcom,pm8916-pon"; - reg = <0x800 0x100>; - mode-bootloader = <0x2>; - mode-recovery = <0x1>; - - pwrkey { - compatible = "qcom,pm8941-pwrkey"; - debounce = <15625>; - bias-pull-up; - }; - - pm8916_resin: resin { - compatible = "qcom,pm8941-resin"; - debounce = <15625>; - bias-pull-up; - }; - }; - - pm8916_gpios: pm8916_gpios@c000 { - compatible = "qcom,pm8916-gpio"; - reg = <0xc000 0x400>; - gpio-controller; - gpio-ranges = <&pm8916_gpios 0 0 4>; - #gpio-cells = <2>; - }; - }; - - pmic1: pm8916@1 { - compatible = "qcom,spmi-pmic"; - reg = <0x1 0x1>; - }; - }; - }; - leds { compatible = "gpio-leds"; user1 { label = "green:user1"; - gpios = <&soc_gpios 21 0>; + gpios = <&msmgpio 21 0>; }; user2 { label = "green:user2"; - gpios = <&soc_gpios 120 0>; + gpios = <&msmgpio 120 0>; }; user3 { @@ -208,4 +55,35 @@ }; }; -#include "dragonboard410c-uboot.dtsi" +&blsp1_uart2 { + status = "okay"; +}; + +&pm8916_gpios { + usb_hub_reset_pm { + gpios = <&pm8916_gpios 2 0>; + }; + + usb_sw_sel_pm { + gpios = <&pm8916_gpios 3 0>; + }; +}; + +&pm8916_resin { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + clock-frequency = <100000000>; +}; + +&sdhc_2 { + status = "okay"; + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; + clock-frequency = <200000000>; +}; + +&usb { + status = "okay"; +}; diff --git a/arch/arm/dts/msm8916-pins.dtsi b/arch/arm/dts/msm8916-pins.dtsi new file mode 100644 index 000000000000..33dfcf318a81 --- /dev/null +++ b/arch/arm/dts/msm8916-pins.dtsi @@ -0,0 +1,582 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. + */ + +&msmgpio { + + blsp1_uart1_default: blsp1-uart1-default-state { + /* TX, RX, CTS_N, RTS_N */ + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "blsp_uart1"; + + drive-strength = <16>; + bias-disable; + }; + + blsp1_uart1_sleep: blsp1-uart1-sleep-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + + blsp1_uart2_default: blsp1-uart2-default-state { + pins = "gpio4", "gpio5"; + function = "blsp_uart2"; + + drive-strength = <16>; + bias-disable; + }; + + blsp1_uart2_sleep: blsp1-uart2-sleep-state { + pins = "gpio4", "gpio5"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + + spi1_default: spi1-default-state { + spi-pins { + pins = "gpio0", "gpio1", "gpio3"; + function = "blsp_spi1"; + + drive-strength = <12>; + bias-disable; + }; + cs-pins { + pins = "gpio2"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + spi1_sleep: spi1-sleep-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + + spi2_default: spi2-default-state { + spi-pins { + pins = "gpio4", "gpio5", "gpio7"; + function = "blsp_spi2"; + + drive-strength = <12>; + bias-disable; + }; + cs-pins { + pins = "gpio6"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + spi2_sleep: spi2-sleep-state { + pins = "gpio4", "gpio5", "gpio6", "gpio7"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + + spi3_default: spi3-default-state { + spi-pins { + pins = "gpio8", "gpio9", "gpio11"; + function = "blsp_spi3"; + + drive-strength = <12>; + bias-disable; + }; + cs-pins { + pins = "gpio10"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + spi3_sleep: spi3-sleep-state { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + + spi4_default: spi4-default-state { + spi-pins { + pins = "gpio12", "gpio13", "gpio15"; + function = "blsp_spi4"; + + drive-strength = <12>; + bias-disable; + }; + cs-pins { + pins = "gpio14"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + spi4_sleep: spi4-sleep-state { + pins = "gpio12", "gpio13", "gpio14", "gpio15"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + + spi5_default: spi5-default-state { + spi-pins { + pins = "gpio16", "gpio17", "gpio19"; + function = "blsp_spi5"; + + drive-strength = <12>; + bias-disable; + }; + cs-pins { + pins = "gpio18"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + spi5_sleep: spi5-sleep-state { + pins = "gpio16", "gpio17", "gpio18", "gpio19"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + + spi6_default: spi6-default-state { + spi-pins { + pins = "gpio20", "gpio21", "gpio23"; + function = "blsp_spi6"; + + drive-strength = <12>; + bias-disable; + }; + cs-pins { + pins = "gpio22"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + spi6_sleep: spi6-sleep-state { + pins = "gpio20", "gpio21", "gpio22", "gpio23"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + + i2c1_default: i2c1-default-state { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + + drive-strength = <2>; + bias-disable; + }; + + i2c1_sleep: i2c1-sleep-state { + pins = "gpio2", "gpio3"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + i2c2_default: i2c2-default-state { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + + drive-strength = <2>; + bias-disable; + }; + + i2c2_sleep: i2c2-sleep-state { + pins = "gpio6", "gpio7"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + i2c3_default: i2c3-default-state { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + + drive-strength = <2>; + bias-disable; + }; + + i2c3_sleep: i2c3-sleep-state { + pins = "gpio10", "gpio11"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + i2c4_default: i2c4-default-state { + pins = "gpio14", "gpio15"; + function = "blsp_i2c4"; + + drive-strength = <2>; + bias-disable; + }; + + i2c4_sleep: i2c4-sleep-state { + pins = "gpio14", "gpio15"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + i2c5_default: i2c5-default-state { + pins = "gpio18", "gpio19"; + function = "blsp_i2c5"; + + drive-strength = <2>; + bias-disable; + }; + + i2c5_sleep: i2c5-sleep-state { + pins = "gpio18", "gpio19"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + i2c6_default: i2c6-default-state { + pins = "gpio22", "gpio23"; + function = "blsp_i2c6"; + + drive-strength = <2>; + bias-disable; + }; + + i2c6_sleep: i2c6-sleep-state { + pins = "gpio22", "gpio23"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + pmx-sdc1-clk-state { + sdc1_clk_on: clk-on-pins { + pins = "sdc1_clk"; + + bias-disable; + drive-strength = <16>; + }; + sdc1_clk_off: clk-off-pins { + pins = "sdc1_clk"; + + bias-disable; + drive-strength = <2>; + }; + }; + + pmx-sdc1-cmd-state { + sdc1_cmd_on: cmd-on-pins { + pins = "sdc1_cmd"; + + bias-pull-up; + drive-strength = <10>; + }; + sdc1_cmd_off: cmd-off-pins { + pins = "sdc1_cmd"; + + bias-pull-up; + drive-strength = <2>; + }; + }; + + pmx-sdc1-data-state { + sdc1_data_on: data-on-pins { + pins = "sdc1_data"; + + bias-pull-up; + drive-strength = <10>; + }; + sdc1_data_off: data-off-pins { + pins = "sdc1_data"; + + bias-pull-up; + drive-strength = <2>; + }; + }; + + pmx-sdc2-clk-state { + sdc2_clk_on: clk-on-pins { + pins = "sdc2_clk"; + + bias-disable; + drive-strength = <16>; + }; + sdc2_clk_off: clk-off-pins { + pins = "sdc2_clk"; + + bias-disable; + drive-strength = <2>; + }; + }; + + pmx-sdc2-cmd-state { + sdc2_cmd_on: cmd-on-pins { + pins = "sdc2_cmd"; + + bias-pull-up; + drive-strength = <10>; + }; + sdc2_cmd_off: cmd-off-pins { + pins = "sdc2_cmd"; + + bias-pull-up; + drive-strength = <2>; + }; + }; + + pmx-sdc2-data-state { + sdc2_data_on: data-on-pins { + pins = "sdc2_data"; + + bias-pull-up; + drive-strength = <10>; + }; + sdc2_data_off: data-off-pins { + pins = "sdc2_data"; + + bias-pull-up; + drive-strength = <2>; + }; + }; + + pmx-sdc2-cd-pin-state { + sdc2_cd_on: cd-on-pins { + pins = "gpio38"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + sdc2_cd_off: cd-off-pins { + pins = "gpio38"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + }; + + cdc-pdm-lines-state { + cdc_pdm_lines_act: pdm-lines-on-pins { + pins = "gpio63", "gpio64", "gpio65", "gpio66", + "gpio67", "gpio68"; + function = "cdc_pdm0"; + + drive-strength = <8>; + bias-disable; + }; + cdc_pdm_lines_sus: pdm-lines-off-pins { + pins = "gpio63", "gpio64", "gpio65", "gpio66", + "gpio67", "gpio68"; + function = "cdc_pdm0"; + + drive-strength = <2>; + bias-pull-down; + }; + }; + + ext-pri-tlmm-lines-state { + ext_pri_tlmm_lines_act: ext-pa-on-pins { + pins = "gpio113", "gpio114", "gpio115", "gpio116"; + function = "pri_mi2s"; + + drive-strength = <8>; + bias-disable; + }; + ext_pri_tlmm_lines_sus: ext-pa-off-pins { + pins = "gpio113", "gpio114", "gpio115", "gpio116"; + function = "pri_mi2s"; + + drive-strength = <2>; + bias-disable; + }; + }; + + ext-pri-ws-line-state { + ext_pri_ws_act: ext-pa-on-pins { + pins = "gpio110"; + function = "pri_mi2s_ws"; + + drive-strength = <8>; + bias-disable; + }; + ext_pri_ws_sus: ext-pa-off-pins { + pins = "gpio110"; + function = "pri_mi2s_ws"; + + drive-strength = <2>; + bias-disable; + }; + }; + + ext-mclk-tlmm-lines-state { + ext_mclk_tlmm_lines_act: mclk-lines-on-pins { + pins = "gpio116"; + function = "pri_mi2s"; + + drive-strength = <8>; + bias-disable; + }; + ext_mclk_tlmm_lines_sus: mclk-lines-off-pins { + pins = "gpio116"; + function = "pri_mi2s"; + + drive-strength = <2>; + bias-disable; + }; + }; + + /* secondary Mi2S */ + ext-sec-tlmm-lines-state { + ext_sec_tlmm_lines_act: tlmm-lines-on-pins { + pins = "gpio112", "gpio117", "gpio118", "gpio119"; + function = "sec_mi2s"; + + drive-strength = <8>; + bias-disable; + }; + ext_sec_tlmm_lines_sus: tlmm-lines-off-pins { + pins = "gpio112", "gpio117", "gpio118", "gpio119"; + function = "sec_mi2s"; + + drive-strength = <2>; + bias-disable; + }; + }; + + cdc_dmic_lines_act: cdc-dmic-lines-on-state { + clk-pins { + pins = "gpio0"; + function = "dmic0_clk"; + + drive-strength = <8>; + }; + data-pins { + pins = "gpio1"; + function = "dmic0_data"; + + drive-strength = <8>; + }; + }; + cdc_dmic_lines_sus: cdc-dmic-lines-off-state { + clk-pins { + pins = "gpio0"; + function = "dmic0_clk"; + + drive-strength = <2>; + bias-disable; + }; + data-pins { + pins = "gpio1"; + function = "dmic0_data"; + + drive-strength = <2>; + bias-disable; + }; + }; + + wcnss_pin_a: wcnss-active-state { + pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44"; + function = "wcss_wlan"; + + drive-strength = <6>; + bias-pull-up; + }; + + cci0_default: cci0-default-state { + pins = "gpio29", "gpio30"; + function = "cci_i2c"; + + drive-strength = <16>; + bias-disable; + }; + + camera_front_default: camera-front-default-state { + pwdn-pins { + pins = "gpio33"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + }; + rst-pins { + pins = "gpio28"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + }; + mclk1-pins { + pins = "gpio27"; + function = "cam_mclk1"; + + drive-strength = <16>; + bias-disable; + }; + }; + + camera_rear_default: camera-rear-default-state { + pwdn-pins { + pins = "gpio34"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + }; + rst-pins { + pins = "gpio35"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + }; + mclk0-pins { + pins = "gpio26"; + function = "cam_mclk0"; + + drive-strength = <16>; + bias-disable; + }; + }; +}; diff --git a/arch/arm/dts/msm8916-pm8916.dtsi b/arch/arm/dts/msm8916-pm8916.dtsi new file mode 100644 index 000000000000..6eb5e0a39510 --- /dev/null +++ b/arch/arm/dts/msm8916-pm8916.dtsi @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "msm8916.dtsi" +#include "pm8916.dtsi" + +&camss { + vdda-supply = <&pm8916_l2>; +}; + +&dsi0 { + vdda-supply = <&pm8916_l2>; + vddio-supply = <&pm8916_l6>; +}; + +&dsi_phy0 { + vddio-supply = <&pm8916_l6>; +}; + +&mpss { + pll-supply = <&pm8916_l7>; +}; + +&sdhc_1 { + vmmc-supply = <&pm8916_l8>; + vqmmc-supply = <&pm8916_l5>; +}; + +&sdhc_2 { + vmmc-supply = <&pm8916_l11>; + vqmmc-supply = <&pm8916_l12>; +}; + +&usb_hs_phy { + v1p8-supply = <&pm8916_l7>; + v3p3-supply = <&pm8916_l13>; +}; + +&wcnss { + vddpx-supply = <&pm8916_l7>; +}; + +&wcnss_iris { + vddxo-supply = <&pm8916_l7>; + vddrfa-supply = <&pm8916_s3>; + vddpa-supply = <&pm8916_l9>; + vdddig-supply = <&pm8916_l5>; +}; + +&rpm_requests { + smd_rpm_regulators: regulators { + compatible = "qcom,rpm-pm8916-regulators"; + + /* pm8916_s1 is managed by rpmpd (MSM8916_VDDCX) */ + pm8916_s3: s3 {}; + pm8916_s4: s4 {}; + + pm8916_l1: l1 {}; + pm8916_l2: l2 {}; + /* pm8916_l3 is managed by rpmpd (MSM8916_VDDMX) */ + pm8916_l4: l4 {}; + pm8916_l5: l5 {}; + pm8916_l6: l6 {}; + pm8916_l7: l7 {}; + pm8916_l8: l8 {}; + pm8916_l9: l9 {}; + pm8916_l10: l10 {}; + pm8916_l11: l11 {}; + pm8916_l12: l12 {}; + pm8916_l13: l13 {}; + pm8916_l14: l14 {}; + pm8916_l15: l15 {}; + pm8916_l16: l16 {}; + pm8916_l17: l17 {}; + pm8916_l18: l18 {}; + }; +}; diff --git a/arch/arm/dts/msm8916.dtsi b/arch/arm/dts/msm8916.dtsi new file mode 100644 index 000000000000..834e0b66b7f2 --- /dev/null +++ b/arch/arm/dts/msm8916.dtsi @@ -0,0 +1,2194 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + aliases { + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_2; /* SDC2 SD card slot */ + }; + + chosen { }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0 0x80000000 0 0>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + tz-apps@86000000 { + reg = <0x0 0x86000000 0x0 0x300000>; + no-map; + }; + + smem@86300000 { + compatible = "qcom,smem"; + reg = <0x0 0x86300000 0x0 0x100000>; + no-map; + + hwlocks = <&tcsr_mutex 3>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + }; + + hypervisor@86400000 { + reg = <0x0 0x86400000 0x0 0x100000>; + no-map; + }; + + tz@86500000 { + reg = <0x0 0x86500000 0x0 0x180000>; + no-map; + }; + + reserved@86680000 { + reg = <0x0 0x86680000 0x0 0x80000>; + no-map; + }; + + rmtfs@86700000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x86700000 0x0 0xe0000>; + no-map; + + qcom,client-id = <1>; + }; + + rfsa@867e0000 { + reg = <0x0 0x867e0000 0x0 0x20000>; + no-map; + }; + + mpss_mem: mpss@86800000 { + reg = <0x0 0x86800000 0x0 0x2b00000>; + no-map; + }; + + wcnss_mem: wcnss@89300000 { + reg = <0x0 0x89300000 0x0 0x600000>; + no-map; + }; + + venus_mem: venus@89900000 { + reg = <0x0 0x89900000 0x0 0x600000>; + no-map; + }; + + mba_mem: mba@8ea00000 { + no-map; + reg = <0 0x8ea00000 0 0x100000>; + }; + }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + clocks = <&apcs>; + operating-points-v2 = <&cpu_opp_table>; + #cooling-cells = <2>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; + qcom,acc = <&cpu0_acc>; + qcom,saw = <&cpu0_saw>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + clocks = <&apcs>; + operating-points-v2 = <&cpu_opp_table>; + #cooling-cells = <2>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; + qcom,acc = <&cpu1_acc>; + qcom,saw = <&cpu1_saw>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x2>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + clocks = <&apcs>; + operating-points-v2 = <&cpu_opp_table>; + #cooling-cells = <2>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; + qcom,acc = <&cpu2_acc>; + qcom,saw = <&cpu2_saw>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x3>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + clocks = <&apcs>; + operating-points-v2 = <&cpu_opp_table>; + #cooling-cells = <2>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; + qcom,acc = <&cpu3_acc>; + qcom,saw = <&cpu3_saw>; + }; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + idle-state-name = "standalone-power-collapse"; + arm,psci-suspend-param = <0x40000002>; + entry-latency-us = <130>; + exit-latency-us = <150>; + min-residency-us = <2000>; + local-timer-stop; + }; + }; + + domain-idle-states { + + CLUSTER_RET: cluster-retention { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000012>; + entry-latency-us = <500>; + exit-latency-us = <500>; + min-residency-us = <2000>; + }; + + CLUSTER_PWRDN: cluster-gdhs { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000032>; + entry-latency-us = <2000>; + exit-latency-us = <2000>; + min-residency-us = <6000>; + }; + }; + }; + + cpu_opp_table: opp-table-cpu { + compatible = "operating-points-v2"; + opp-shared; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + }; + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + }; + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + }; + opp-998400000 { + opp-hz = /bits/ 64 <998400000>; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-msm8916", "qcom,scm"; + clocks = <&gcc GCC_CRYPTO_CLK>, + <&gcc GCC_CRYPTO_AXI_CLK>, + <&gcc GCC_CRYPTO_AHB_CLK>; + clock-names = "core", "bus", "iface"; + #reset-cells = <1>; + + qcom,dload-mode = <&tcsr 0x6100>; + }; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_SLEEP_0>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_SLEEP_0>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_SLEEP_0>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_SLEEP_0>; + }; + + CLUSTER_PD: power-domain-cluster { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWRDN>; + }; + }; + + smd { + compatible = "qcom,smd"; + + rpm { + interrupts = ; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-msm8916"; + qcom,smd-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc"; + #clock-cells = <1>; + clocks = <&xo_board>; + clock-names = "xo"; + }; + + rpmpd: power-controller { + compatible = "qcom,msm8916-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_ret: opp1 { + opp-level = <1>; + }; + rpmpd_opp_svs_krait: opp2 { + opp-level = <2>; + }; + rpmpd_opp_svs_soc: opp3 { + opp-level = <3>; + }; + rpmpd_opp_nom: opp4 { + opp-level = <4>; + }; + rpmpd_opp_turbo: opp5 { + opp-level = <5>; + }; + rpmpd_opp_super_turbo: opp6 { + opp-level = <6>; + }; + }; + }; + }; + }; + }; + + smp2p-hexagon { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts = ; + + qcom,ipc = <&apcs 8 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + hexagon_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + + hexagon_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-wcnss { + compatible = "qcom,smp2p"; + qcom,smem = <451>, <431>; + + interrupts = ; + + qcom,ipc = <&apcs 8 18>; + + qcom,local-pid = <0>; + qcom,remote-pid = <4>; + + wcnss_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + + wcnss_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smsm { + compatible = "qcom,smsm"; + + #address-cells = <1>; + #size-cells = <0>; + + qcom,ipc-1 = <&apcs 8 13>; + qcom,ipc-3 = <&apcs 8 19>; + + apps_smsm: apps@0 { + reg = <0>; + + #qcom,smem-state-cells = <1>; + }; + + hexagon_smsm: hexagon@1 { + reg = <1>; + interrupts = ; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + wcnss_smsm: wcnss@6 { + reg = <6>; + interrupts = ; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + rng@22000 { + compatible = "qcom,prng"; + reg = <0x00022000 0x200>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + restart@4ab000 { + compatible = "qcom,pshold"; + reg = <0x004ab000 0x4>; + }; + + qfprom: qfprom@5c000 { + compatible = "qcom,msm8916-qfprom", "qcom,qfprom"; + reg = <0x0005c000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + tsens_base1: base1@d0 { + reg = <0xd0 0x1>; + bits = <0 7>; + }; + + tsens_s0_p1: s0-p1@d0 { + reg = <0xd0 0x2>; + bits = <7 5>; + }; + + tsens_s0_p2: s0-p2@d1 { + reg = <0xd1 0x2>; + bits = <4 5>; + }; + + tsens_s1_p1: s1-p1@d2 { + reg = <0xd2 0x1>; + bits = <1 5>; + }; + tsens_s1_p2: s1-p2@d2 { + reg = <0xd2 0x2>; + bits = <6 5>; + }; + tsens_s2_p1: s2-p1@d3 { + reg = <0xd3 0x1>; + bits = <3 5>; + }; + + tsens_s2_p2: s2-p2@d4 { + reg = <0xd4 0x1>; + bits = <0 5>; + }; + + // no tsens with hw_id 3 + + tsens_s4_p1: s4-p1@d4 { + reg = <0xd4 0x2>; + bits = <5 5>; + }; + + tsens_s4_p2: s4-p2@d5 { + reg = <0xd5 0x1>; + bits = <2 5>; + }; + + tsens_s5_p1: s5-p1@d5 { + reg = <0xd5 0x2>; + bits = <7 5>; + }; + + tsens_s5_p2: s5-p2@d6 { + reg = <0xd6 0x2>; + bits = <4 5>; + }; + + tsens_base2: base2@d7 { + reg = <0xd7 0x1>; + bits = <1 7>; + }; + + tsens_mode: mode@ef { + reg = <0xef 0x1>; + bits = <5 3>; + }; + }; + + rpm_msg_ram: sram@60000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x00060000 0x8000>; + }; + + sram@290000 { + compatible = "qcom,msm8916-rpm-stats"; + reg = <0x00290000 0x10000>; + }; + + bimc: interconnect@400000 { + compatible = "qcom,msm8916-bimc"; + reg = <0x00400000 0x62000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; + }; + + tsens: thermal-sensor@4a9000 { + compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1"; + reg = <0x004a9000 0x1000>, /* TM */ + <0x004a8000 0x1000>; /* SROT */ + + // no hw_id 3 + nvmem-cells = <&tsens_mode>, + <&tsens_base1>, <&tsens_base2>, + <&tsens_s0_p1>, <&tsens_s0_p2>, + <&tsens_s1_p1>, <&tsens_s1_p2>, + <&tsens_s2_p1>, <&tsens_s2_p2>, + <&tsens_s4_p1>, <&tsens_s4_p2>, + <&tsens_s5_p1>, <&tsens_s5_p2>; + nvmem-cell-names = "mode", + "base1", "base2", + "s0_p1", "s0_p2", + "s1_p1", "s1_p2", + "s2_p1", "s2_p2", + "s4_p1", "s4_p2", + "s5_p1", "s5_p2"; + #qcom,sensors = <5>; + interrupts = ; + interrupt-names = "uplow"; + #thermal-sensor-cells = <1>; + }; + + pcnoc: interconnect@500000 { + compatible = "qcom,msm8916-pcnoc"; + reg = <0x00500000 0x11000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_PCNOC_CLK>, + <&rpmcc RPM_SMD_PCNOC_A_CLK>; + }; + + snoc: interconnect@580000 { + compatible = "qcom,msm8916-snoc"; + reg = <0x00580000 0x14000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, + <&rpmcc RPM_SMD_SNOC_A_CLK>; + }; + + stm: stm@802000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0x00802000 0x1000>, + <0x09280000 0x180000>; + reg-names = "stm-base", "stm-stimulus-base"; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + status = "disabled"; + + out-ports { + port { + stm_out: endpoint { + remote-endpoint = <&funnel0_in7>; + }; + }; + }; + }; + + /* System CTIs */ + /* CTI 0 - TMC connections */ + cti0: cti@810000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x00810000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + /* CTI 1 - TPIU connections */ + cti1: cti@811000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x00811000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + status = "disabled"; + }; + + /* CTIs 2-11 - no information - not instantiated */ + + tpiu: tpiu@820000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0x00820000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + status = "disabled"; + + in-ports { + port { + tpiu_in: endpoint { + remote-endpoint = <&replicator_out1>; + }; + }; + }; + }; + + funnel0: funnel@821000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x00821000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + status = "disabled"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + /* + * Not described input ports: + * 0 - connected to Resource and Power Manger CPU ETM + * 1 - not-connected + * 2 - connected to Modem CPU ETM + * 3 - not-connected + * 5 - not-connected + * 6 - connected trought funnel to Wireless CPU ETM + * 7 - connected to STM component + */ + + port@4 { + reg = <4>; + funnel0_in4: endpoint { + remote-endpoint = <&funnel1_out>; + }; + }; + + port@7 { + reg = <7>; + funnel0_in7: endpoint { + remote-endpoint = <&stm_out>; + }; + }; + }; + + out-ports { + port { + funnel0_out: endpoint { + remote-endpoint = <&etf_in>; + }; + }; + }; + }; + + replicator: replicator@824000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0x00824000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + status = "disabled"; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + replicator_out0: endpoint { + remote-endpoint = <&etr_in>; + }; + }; + port@1 { + reg = <1>; + replicator_out1: endpoint { + remote-endpoint = <&tpiu_in>; + }; + }; + }; + + in-ports { + port { + replicator_in: endpoint { + remote-endpoint = <&etf_out>; + }; + }; + }; + }; + + etf: etf@825000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x00825000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + status = "disabled"; + + in-ports { + port { + etf_in: endpoint { + remote-endpoint = <&funnel0_out>; + }; + }; + }; + + out-ports { + port { + etf_out: endpoint { + remote-endpoint = <&replicator_in>; + }; + }; + }; + }; + + etr: etr@826000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x00826000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + status = "disabled"; + + in-ports { + port { + etr_in: endpoint { + remote-endpoint = <&replicator_out0>; + }; + }; + }; + }; + + funnel1: funnel@841000 { /* APSS funnel only 4 inputs are used */ + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x00841000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + status = "disabled"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + funnel1_in0: endpoint { + remote-endpoint = <&etm0_out>; + }; + }; + port@1 { + reg = <1>; + funnel1_in1: endpoint { + remote-endpoint = <&etm1_out>; + }; + }; + port@2 { + reg = <2>; + funnel1_in2: endpoint { + remote-endpoint = <&etm2_out>; + }; + }; + port@3 { + reg = <3>; + funnel1_in3: endpoint { + remote-endpoint = <&etm3_out>; + }; + }; + }; + + out-ports { + port { + funnel1_out: endpoint { + remote-endpoint = <&funnel0_in4>; + }; + }; + }; + }; + + debug0: debug@850000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x00850000 0x1000>; + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + cpu = <&CPU0>; + status = "disabled"; + }; + + debug1: debug@852000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x00852000 0x1000>; + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + cpu = <&CPU1>; + status = "disabled"; + }; + + debug2: debug@854000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x00854000 0x1000>; + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + cpu = <&CPU2>; + status = "disabled"; + }; + + debug3: debug@856000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x00856000 0x1000>; + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + cpu = <&CPU3>; + status = "disabled"; + }; + + /* Core CTIs; CTIs 12-15 */ + /* CTI - CPU-0 */ + cti12: cti@858000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0x00858000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU0>; + arm,cs-dev-assoc = <&etm0>; + + status = "disabled"; + }; + + /* CTI - CPU-1 */ + cti13: cti@859000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0x00859000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU1>; + arm,cs-dev-assoc = <&etm1>; + + status = "disabled"; + }; + + /* CTI - CPU-2 */ + cti14: cti@85a000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0x0085a000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU2>; + arm,cs-dev-assoc = <&etm2>; + + status = "disabled"; + }; + + /* CTI - CPU-3 */ + cti15: cti@85b000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0x0085b000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU3>; + arm,cs-dev-assoc = <&etm3>; + + status = "disabled"; + }; + + etm0: etm@85c000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x0085c000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU0>; + + status = "disabled"; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = <&funnel1_in0>; + }; + }; + }; + }; + + etm1: etm@85d000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x0085d000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU1>; + + status = "disabled"; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = <&funnel1_in1>; + }; + }; + }; + }; + + etm2: etm@85e000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x0085e000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU2>; + + status = "disabled"; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = <&funnel1_in2>; + }; + }; + }; + }; + + etm3: etm@85f000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x0085f000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + arm,coresight-loses-context-with-cpu; + + cpu = <&CPU3>; + + status = "disabled"; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = <&funnel1_in3>; + }; + }; + }; + }; + + msmgpio: pinctrl@1000000 { + compatible = "qcom,msm8916-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = ; + gpio-controller; + gpio-ranges = <&msmgpio 0 0 122>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,gcc-msm8916"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0x01800000 0x80000>; + clocks = <&xo_board>, + <&sleep_clk>, + <&dsi_phy0 1>, + <&dsi_phy0 0>, + <0>, + <0>, + <0>; + clock-names = "xo", + "sleep_clk", + "dsi0pll", + "dsi0pllbyte", + "ext_mclk", + "ext_pri_i2s", + "ext_sec_i2s"; + }; + + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01905000 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr: syscon@1937000 { + compatible = "qcom,tcsr-msm8916", "syscon"; + reg = <0x01937000 0x30000>; + }; + + mdss: display-subsystem@1a00000 { + status = "disabled"; + compatible = "qcom,mdss"; + reg = <0x01a00000 0x1000>, + <0x01ac8000 0x3000>; + reg-names = "mdss_phys", "vbif_phys"; + + power-domains = <&gcc MDSS_GDSC>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "vsync"; + + interrupts = ; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mdp: display-controller@1a01000 { + compatible = "qcom,msm8916-mdp5", "qcom,mdp5"; + reg = <0x01a01000 0x89000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; + + iommus = <&apps_iommu 4>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp5_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; + + dsi0: dsi@1a98000 { + compatible = "qcom,msm8916-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + reg = <0x01a98000 0x25c>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + assigned-clocks = <&gcc BYTE0_CLK_SRC>, + <&gcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi_phy0 0>, + <&dsi_phy0 1>; + + clocks = <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core"; + phys = <&dsi_phy0>; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&mdp5_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi_phy0: phy@1a98300 { + compatible = "qcom,dsi-phy-28nm-lp"; + reg = <0x01a98300 0xd4>, + <0x01a98500 0x280>, + <0x01a98780 0x30>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&xo_board>; + clock-names = "iface", "ref"; + }; + }; + + camss: camss@1b00000 { + compatible = "qcom,msm8916-camss"; + reg = <0x01b0ac00 0x200>, + <0x01b00030 0x4>, + <0x01b0b000 0x200>, + <0x01b00038 0x4>, + <0x01b08000 0x100>, + <0x01b08400 0x100>, + <0x01b0a000 0x500>, + <0x01b00020 0x10>, + <0x01b10000 0x1000>; + reg-names = "csiphy0", + "csiphy0_clk_mux", + "csiphy1", + "csiphy1_clk_mux", + "csid0", + "csid1", + "ispif", + "csi_clk_mux", + "vfe0"; + interrupts = , + , + , + , + , + ; + interrupt-names = "csiphy0", + "csiphy1", + "csid0", + "csid1", + "ispif", + "vfe0"; + power-domains = <&gcc VFE_GDSC>; + clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>, + <&gcc GCC_CAMSS_ISPIF_AHB_CLK>, + <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>, + <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>, + <&gcc GCC_CAMSS_CSI0_AHB_CLK>, + <&gcc GCC_CAMSS_CSI0_CLK>, + <&gcc GCC_CAMSS_CSI0PHY_CLK>, + <&gcc GCC_CAMSS_CSI0PIX_CLK>, + <&gcc GCC_CAMSS_CSI0RDI_CLK>, + <&gcc GCC_CAMSS_CSI1_AHB_CLK>, + <&gcc GCC_CAMSS_CSI1_CLK>, + <&gcc GCC_CAMSS_CSI1PHY_CLK>, + <&gcc GCC_CAMSS_CSI1PIX_CLK>, + <&gcc GCC_CAMSS_CSI1RDI_CLK>, + <&gcc GCC_CAMSS_AHB_CLK>, + <&gcc GCC_CAMSS_VFE0_CLK>, + <&gcc GCC_CAMSS_CSI_VFE0_CLK>, + <&gcc GCC_CAMSS_VFE_AHB_CLK>, + <&gcc GCC_CAMSS_VFE_AXI_CLK>; + clock-names = "top_ahb", + "ispif_ahb", + "csiphy0_timer", + "csiphy1_timer", + "csi0_ahb", + "csi0", + "csi0_phy", + "csi0_pix", + "csi0_rdi", + "csi1_ahb", + "csi1", + "csi1_phy", + "csi1_pix", + "csi1_rdi", + "ahb", + "vfe0", + "csi_vfe0", + "vfe_ahb", + "vfe_axi"; + iommus = <&apps_iommu 3>; + status = "disabled"; + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cci: cci@1b0c000 { + compatible = "qcom,msm8916-cci", "qcom,msm8226-cci"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x01b0c000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>, + <&gcc GCC_CAMSS_CCI_AHB_CLK>, + <&gcc GCC_CAMSS_CCI_CLK>, + <&gcc GCC_CAMSS_AHB_CLK>; + clock-names = "camss_top_ahb", "cci_ahb", + "cci", "camss_ahb"; + assigned-clocks = <&gcc GCC_CAMSS_CCI_AHB_CLK>, + <&gcc GCC_CAMSS_CCI_CLK>; + assigned-clock-rates = <80000000>, <19200000>; + pinctrl-names = "default"; + pinctrl-0 = <&cci0_default>; + status = "disabled"; + + cci_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + gpu@1c00000 { + compatible = "qcom,adreno-306.0", "qcom,adreno"; + reg = <0x01c00000 0x20000>; + reg-names = "kgsl_3d0_reg_memory"; + interrupts = ; + interrupt-names = "kgsl_3d0_irq"; + clock-names = + "core", + "iface", + "mem", + "mem_iface", + "alt_mem_iface", + "gfx3d"; + clocks = + <&gcc GCC_OXILI_GFX3D_CLK>, + <&gcc GCC_OXILI_AHB_CLK>, + <&gcc GCC_OXILI_GMEM_CLK>, + <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_BIMC_GPU_CLK>, + <&gcc GFX3D_CLK_SRC>; + power-domains = <&gcc OXILI_GDSC>; + operating-points-v2 = <&gpu_opp_table>; + iommus = <&gpu_iommu 1>, <&gpu_iommu 2>; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + }; + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + }; + }; + }; + + venus: video-codec@1d00000 { + compatible = "qcom,msm8916-venus"; + reg = <0x01d00000 0xff000>; + interrupts = ; + power-domains = <&gcc VENUS_GDSC>; + clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>, + <&gcc GCC_VENUS0_AHB_CLK>, + <&gcc GCC_VENUS0_AXI_CLK>; + clock-names = "core", "iface", "bus"; + iommus = <&apps_iommu 5>; + memory-region = <&venus_mem>; + status = "okay"; + + video-decoder { + compatible = "venus-decoder"; + }; + + video-encoder { + compatible = "venus-encoder"; + }; + }; + + apps_iommu: iommu@1ef0000 { + #address-cells = <1>; + #size-cells = <1>; + #iommu-cells = <1>; + compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; + ranges = <0 0x01e20000 0x40000>; + reg = <0x01ef0000 0x3000>; + clocks = <&gcc GCC_SMMU_CFG_CLK>, + <&gcc GCC_APSS_TCU_CLK>; + clock-names = "iface", "bus"; + qcom,iommu-secure-id = <17>; + + /* VFE */ + iommu-ctx@3000 { + compatible = "qcom,msm-iommu-v1-sec"; + reg = <0x3000 0x1000>; + interrupts = ; + }; + + /* MDP_0 */ + iommu-ctx@4000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x4000 0x1000>; + interrupts = ; + }; + + /* VENUS_NS */ + iommu-ctx@5000 { + compatible = "qcom,msm-iommu-v1-sec"; + reg = <0x5000 0x1000>; + interrupts = ; + }; + }; + + gpu_iommu: iommu@1f08000 { + #address-cells = <1>; + #size-cells = <1>; + #iommu-cells = <1>; + compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; + ranges = <0 0x01f08000 0x10000>; + clocks = <&gcc GCC_SMMU_CFG_CLK>, + <&gcc GCC_GFX_TCU_CLK>; + clock-names = "iface", "bus"; + qcom,iommu-secure-id = <18>; + + /* GFX3D_USER */ + iommu-ctx@1000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x1000 0x1000>; + interrupts = ; + }; + + /* GFX3D_PRIV */ + iommu-ctx@2000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x2000 0x1000>; + interrupts = ; + }; + }; + + spmi_bus: spmi@200f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0200f000 0x001000>, + <0x02400000 0x400000>, + <0x02c00000 0x400000>, + <0x03800000 0x200000>, + <0x0200a000 0x002100>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = ; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + bam_dmux_dma: dma-controller@4044000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x04044000 0x19000>; + interrupts = ; + #dma-cells = <1>; + qcom,ee = <0>; + + num-channels = <6>; + qcom,num-ees = <1>; + qcom,powered-remotely; + + status = "disabled"; + }; + + mpss: remoteproc@4080000 { + compatible = "qcom,msm8916-mss-pil"; + reg = <0x04080000 0x100>, + <0x04020000 0x040>; + + reg-names = "qdsp6", "rmb"; + + interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, + <&hexagon_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&hexagon_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&hexagon_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&hexagon_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + power-domains = <&rpmpd MSM8916_VDDCX>, + <&rpmpd MSM8916_VDDMX>; + power-domain-names = "cx", "mx"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&xo_board>; + clock-names = "iface", "bus", "mem", "xo"; + + qcom,smem-states = <&hexagon_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + resets = <&scm 0>; + reset-names = "mss_restart"; + + qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>; + + status = "disabled"; + + mba { + memory-region = <&mba_mem>; + }; + + mpss { + memory-region = <&mpss_mem>; + }; + + bam_dmux: bam-dmux { + compatible = "qcom,bam-dmux"; + + interrupt-parent = <&hexagon_smsm>; + interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "pc", "pc-ack"; + + qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>; + qcom,smem-state-names = "pc", "pc-ack"; + + dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>; + dma-names = "tx", "rx"; + + status = "disabled"; + }; + + smd-edge { + interrupts = ; + + qcom,smd-edge = <0>; + qcom,ipc = <&apcs 8 12>; + qcom,remote-pid = <1>; + + label = "hexagon"; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,smd-channels = "fastrpcsmd-apps-dsp"; + label = "adsp"; + qcom,non-secure-domain; + + #address-cells = <1>; + #size-cells = <0>; + + cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + }; + }; + }; + }; + + sound: sound@7702000 { + status = "disabled"; + compatible = "qcom,apq8016-sbc-sndcard"; + reg = <0x07702000 0x4>, <0x07702004 0x4>; + reg-names = "mic-iomux", "spkr-iomux"; + }; + + lpass: audio-controller@7708000 { + status = "disabled"; + compatible = "qcom,apq8016-lpass-cpu"; + + /* + * Note: Unlike the name would suggest, the SEC_I2S_CLK + * is actually only used by Tertiary MI2S while + * Primary/Secondary MI2S both use the PRI_I2S_CLK. + */ + clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, + <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>, + <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>; + + clock-names = "ahbix-clk", + "pcnoc-mport-clk", + "pcnoc-sway-clk", + "mi2s-bit-clk0", + "mi2s-bit-clk1", + "mi2s-bit-clk2", + "mi2s-bit-clk3"; + #sound-dai-cells = <1>; + + interrupts = ; + interrupt-names = "lpass-irq-lpaif"; + reg = <0x07708000 0x10000>; + reg-names = "lpass-lpaif"; + + #address-cells = <1>; + #size-cells = <0>; + }; + + lpass_codec: audio-codec@771c000 { + compatible = "qcom,msm8916-wcd-digital-codec"; + reg = <0x0771c000 0x400>; + clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, + <&gcc GCC_CODEC_DIGCODEC_CLK>; + clock-names = "ahbix-clk", "mclk"; + #sound-dai-cells = <1>; + }; + + sdhc_1: mmc@7824000 { + compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; + reg = <0x07824900 0x11c>, <0x07824000 0x800>; + reg-names = "hc", "core"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; + mmc-ddr-1_8v; + bus-width = <8>; + non-removable; + status = "disabled"; + }; + + sdhc_2: mmc@7864000 { + compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; + reg = <0x07864900 0x11c>, <0x07864000 0x800>; + reg-names = "hc", "core"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; + bus-width = <4>; + status = "disabled"; + }; + + blsp_dma: dma-controller@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x23000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + blsp1_uart1: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078af000 0x200>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 0>, <&blsp_dma 1>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart1_default>; + pinctrl-1 = <&blsp1_uart1_sleep>; + status = "disabled"; + }; + + blsp1_uart2: serial@78b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b0000 0x200>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 2>, <&blsp_dma 3>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; + status = "disabled"; + }; + + blsp_i2c1: i2c@78b5000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b5000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 4>, <&blsp_dma 5>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_default>; + pinctrl-1 = <&i2c1_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi1: spi@78b5000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b5000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 4>, <&blsp_dma 5>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi1_default>; + pinctrl-1 = <&spi1_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c2: i2c@78b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b6000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 6>, <&blsp_dma 7>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c2_default>; + pinctrl-1 = <&i2c2_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi2: spi@78b6000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b6000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 6>, <&blsp_dma 7>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi2_default>; + pinctrl-1 = <&spi2_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c3: i2c@78b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b7000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 8>, <&blsp_dma 9>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c3_default>; + pinctrl-1 = <&i2c3_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi3: spi@78b7000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b7000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 8>, <&blsp_dma 9>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi3_default>; + pinctrl-1 = <&spi3_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c4: i2c@78b8000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b8000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 10>, <&blsp_dma 11>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c4_default>; + pinctrl-1 = <&i2c4_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi4: spi@78b8000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b8000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 10>, <&blsp_dma 11>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi4_default>; + pinctrl-1 = <&spi4_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c5: i2c@78b9000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b9000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 12>, <&blsp_dma 13>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c5_default>; + pinctrl-1 = <&i2c5_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi5: spi@78b9000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b9000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 12>, <&blsp_dma 13>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi5_default>; + pinctrl-1 = <&spi5_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c6: i2c@78ba000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078ba000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 14>, <&blsp_dma 15>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c6_default>; + pinctrl-1 = <&i2c6_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi6: spi@78ba000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078ba000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 14>, <&blsp_dma 15>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi6_default>; + pinctrl-1 = <&spi6_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + usb: usb@78d9000 { + compatible = "qcom,ci-hdrc"; + reg = <0x078d9000 0x200>, + <0x078d9200 0x200>; + interrupts = , + ; + clocks = <&gcc GCC_USB_HS_AHB_CLK>, + <&gcc GCC_USB_HS_SYSTEM_CLK>; + clock-names = "iface", "core"; + assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>; + assigned-clock-rates = <80000000>; + resets = <&gcc GCC_USB_HS_BCR>; + reset-names = "core"; + phy_type = "ulpi"; + dr_mode = "otg"; + hnp-disable; + srp-disable; + adp-disable; + ahb-burst-config = <0>; + phy-names = "usb-phy"; + phys = <&usb_hs_phy>; + status = "disabled"; + #reset-cells = <1>; + + ulpi { + usb_hs_phy: phy { + compatible = "qcom,usb-hs-phy-msm8916", + "qcom,usb-hs-phy"; + #phy-cells = <0>; + clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>; + clock-names = "ref", "sleep"; + resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>; + reset-names = "phy", "por"; + qcom,init-seq = /bits/ 8 <0x0 0x44>, + <0x1 0x6b>, + <0x2 0x24>, + <0x3 0x13>; + }; + }; + }; + + wcnss: remoteproc@a21b000 { + compatible = "qcom,pronto-v2-pil", "qcom,pronto"; + reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>; + reg-names = "ccu", "dxe", "pmu"; + + memory-region = <&wcnss_mem>; + + interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + power-domains = <&rpmpd MSM8916_VDDCX>, + <&rpmpd MSM8916_VDDMX>; + power-domain-names = "cx", "mx"; + + qcom,smem-states = <&wcnss_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + pinctrl-names = "default"; + pinctrl-0 = <&wcnss_pin_a>; + + status = "disabled"; + + wcnss_iris: iris { + /* Separate chip, compatible is board-specific */ + clocks = <&rpmcc RPM_SMD_RF_CLK2>; + clock-names = "xo"; + }; + + smd-edge { + interrupts = ; + + qcom,ipc = <&apcs 8 17>; + qcom,smd-edge = <6>; + qcom,remote-pid = <4>; + + label = "pronto"; + + wcnss_ctrl: wcnss { + compatible = "qcom,wcnss"; + qcom,smd-channels = "WCNSS_CTRL"; + + qcom,mmio = <&wcnss>; + + wcnss_bt: bluetooth { + compatible = "qcom,wcnss-bt"; + }; + + wcnss_wifi: wifi { + compatible = "qcom,wcnss-wlan"; + + interrupts = , + ; + interrupt-names = "tx", "rx"; + + qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; + qcom,smem-state-names = "tx-enable", "tx-rings-empty"; + }; + }; + }; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x0b000000 0x1000>, <0x0b002000 0x2000>, + <0x0b001000 0x1000>, <0x0b004000 0x2000>; + interrupts = ; + }; + + apcs: mailbox@b011000 { + compatible = "qcom,msm8916-apcs-kpss-global", "syscon"; + reg = <0x0b011000 0x1000>; + #mbox-cells = <1>; + clocks = <&a53pll>, <&gcc GPLL0_VOTE>; + clock-names = "pll", "aux"; + #clock-cells = <0>; + }; + + a53pll: clock@b016000 { + compatible = "qcom,msm8916-a53pll"; + reg = <0x0b016000 0x40>; + #clock-cells = <0>; + clocks = <&xo_board>; + clock-names = "xo"; + }; + + timer@b020000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0x0b020000 0x1000>; + clock-frequency = <19200000>; + + frame@b021000 { + frame-number = <0>; + interrupts = , + ; + reg = <0x0b021000 0x1000>, + <0x0b022000 0x1000>; + }; + + frame@b023000 { + frame-number = <1>; + interrupts = ; + reg = <0x0b023000 0x1000>; + status = "disabled"; + }; + + frame@b024000 { + frame-number = <2>; + interrupts = ; + reg = <0x0b024000 0x1000>; + status = "disabled"; + }; + + frame@b025000 { + frame-number = <3>; + interrupts = ; + reg = <0x0b025000 0x1000>; + status = "disabled"; + }; + + frame@b026000 { + frame-number = <4>; + interrupts = ; + reg = <0x0b026000 0x1000>; + status = "disabled"; + }; + + frame@b027000 { + frame-number = <5>; + interrupts = ; + reg = <0x0b027000 0x1000>; + status = "disabled"; + }; + + frame@b028000 { + frame-number = <6>; + interrupts = ; + reg = <0x0b028000 0x1000>; + status = "disabled"; + }; + }; + + cpu0_acc: power-manager@b088000 { + compatible = "qcom,msm8916-acc"; + reg = <0x0b088000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; + + cpu0_saw: power-manager@b089000 { + compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b089000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; + + cpu1_acc: power-manager@b098000 { + compatible = "qcom,msm8916-acc"; + reg = <0x0b098000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; + + cpu1_saw: power-manager@b099000 { + compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b099000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; + + cpu2_acc: power-manager@b0a8000 { + compatible = "qcom,msm8916-acc"; + reg = <0x0b0a8000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; + + cpu2_saw: power-manager@b0a9000 { + compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b0a9000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; + + cpu3_acc: power-manager@b0b8000 { + compatible = "qcom,msm8916-acc"; + reg = <0x0b0b8000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; + + cpu3_saw: power-manager@b0b9000 { + compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b0b9000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; + }; + + thermal-zones { + cpu0-1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 5>; + + trips { + cpu0_1_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu0_1_crit: cpu-crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu0_1_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu2-3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 4>; + + trips { + cpu2_3_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu2_3_crit: cpu-crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu2_3_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 2>; + + trips { + gpu_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + gpu_crit: gpu-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 1>; + + trips { + cam_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 0>; + + trips { + modem_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; +}; + +#include "msm8916-pins.dtsi" diff --git a/arch/arm/dts/pm8916.dtsi b/arch/arm/dts/pm8916.dtsi new file mode 100644 index 000000000000..f4fb1a92ab55 --- /dev/null +++ b/arch/arm/dts/pm8916.dtsi @@ -0,0 +1,183 @@ +// SPDX-License-Identifier: GPL-2.0 +#include +#include +#include +#include + +&spmi_bus { + + pm8916_0: pmic@0 { + compatible = "qcom,pm8916", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pon@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = ; + }; + + pm8916_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + status = "disabled"; + }; + + watchdog { + compatible = "qcom,pm8916-wdt"; + interrupts = <0x0 0x8 6 IRQ_TYPE_EDGE_RISING>; + timeout-sec = <60>; + }; + }; + + pm8916_usbin: usb-detect@1300 { + compatible = "qcom,pm8941-misc"; + reg = <0x1300>; + interrupts = <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "usb_vbus"; + status = "disabled"; + }; + + pm8916_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm8916_vadc VADC_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm8916_vadc: adc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + adc-chan@0 { + reg = ; + qcom,pre-scaling = <1 10>; + }; + adc-chan@7 { + reg = ; + qcom,pre-scaling = <1 3>; + }; + adc-chan@8 { + reg = ; + }; + adc-chan@9 { + reg = ; + }; + adc-chan@a { + reg = ; + }; + adc-chan@e { + reg = ; + }; + adc-chan@f { + reg = ; + }; + }; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + + pm8916_mpps: mpps@a000 { + compatible = "qcom,pm8916-mpp", "qcom,spmi-mpp"; + reg = <0xa000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8916_mpps 0 0 4>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pm8916_gpios: gpio@c000 { + compatible = "qcom,pm8916-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm8916_gpios 0 0 4>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pm8916_1: pmic@1 { + compatible = "qcom,pm8916", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8916_pwm: pwm { + compatible = "qcom,pm8916-pwm"; + + #pwm-cells = <2>; + + status = "disabled"; + }; + + pm8916_vib: vibrator@c000 { + compatible = "qcom,pm8916-vib"; + reg = <0xc000>; + status = "disabled"; + }; + + wcd_codec: audio-codec@f000 { + compatible = "qcom,pm8916-wcd-analog-codec"; + reg = <0xf000>; + reg-names = "pmic-codec-core"; + clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; + clock-names = "mclk"; + interrupt-parent = <&spmi_bus>; + interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>, + <0x1 0xf0 0x1 IRQ_TYPE_NONE>, + <0x1 0xf0 0x2 IRQ_TYPE_NONE>, + <0x1 0xf0 0x3 IRQ_TYPE_NONE>, + <0x1 0xf0 0x4 IRQ_TYPE_NONE>, + <0x1 0xf0 0x5 IRQ_TYPE_NONE>, + <0x1 0xf0 0x6 IRQ_TYPE_NONE>, + <0x1 0xf0 0x7 IRQ_TYPE_NONE>, + <0x1 0xf1 0x0 IRQ_TYPE_NONE>, + <0x1 0xf1 0x1 IRQ_TYPE_NONE>, + <0x1 0xf1 0x2 IRQ_TYPE_NONE>, + <0x1 0xf1 0x3 IRQ_TYPE_NONE>, + <0x1 0xf1 0x4 IRQ_TYPE_NONE>, + <0x1 0xf1 0x5 IRQ_TYPE_NONE>; + interrupt-names = "cdc_spk_cnp_int", + "cdc_spk_clip_int", + "cdc_spk_ocp_int", + "mbhc_ins_rem_det1", + "mbhc_but_rel_det", + "mbhc_but_press_det", + "mbhc_ins_rem_det", + "mbhc_switch_int", + "cdc_ear_ocp_int", + "cdc_hphr_ocp_int", + "cdc_hphl_ocp_det", + "cdc_ear_cnp_int", + "cdc_hphr_cnp_int", + "cdc_hphl_cnp_int"; + vdd-cdc-io-supply = <&pm8916_l5>; + vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>; + vdd-micbias-supply = <&pm8916_l13>; + #sound-dai-cells = <1>; + }; + }; +}; diff --git a/include/dt-bindings/arm/coresight-cti-dt.h b/include/dt-bindings/arm/coresight-cti-dt.h new file mode 100644 index 000000000000..61e7bdf8ea6e --- /dev/null +++ b/include/dt-bindings/arm/coresight-cti-dt.h @@ -0,0 +1,37 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * This header provides constants for the defined trigger signal + * types on CoreSight CTI. + */ + +#ifndef _DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H +#define _DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H + +#define GEN_IO 0 +#define GEN_INTREQ 1 +#define GEN_INTACK 2 +#define GEN_HALTREQ 3 +#define GEN_RESTARTREQ 4 +#define PE_EDBGREQ 5 +#define PE_DBGRESTART 6 +#define PE_CTIIRQ 7 +#define PE_PMUIRQ 8 +#define PE_DBGTRIGGER 9 +#define ETM_EXTOUT 10 +#define ETM_EXTIN 11 +#define SNK_FULL 12 +#define SNK_ACQCOMP 13 +#define SNK_FLUSHCOMP 14 +#define SNK_FLUSHIN 15 +#define SNK_TRIGIN 16 +#define STM_ASYNCOUT 17 +#define STM_TOUT_SPTE 18 +#define STM_TOUT_SW 19 +#define STM_TOUT_HETE 20 +#define STM_HWEVENT 21 +#define ELA_TSTART 22 +#define ELA_TSTOP 23 +#define ELA_DBGREQ 24 +#define CTI_TRIG_MAX 25 + +#endif /*_DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H */ diff --git a/include/dt-bindings/clock/qcom,rpmcc.h b/include/dt-bindings/clock/qcom,rpmcc.h new file mode 100644 index 000000000000..46309c9953b2 --- /dev/null +++ b/include/dt-bindings/clock/qcom,rpmcc.h @@ -0,0 +1,174 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright 2015 Linaro Limited + */ + +#ifndef _DT_BINDINGS_CLK_MSM_RPMCC_H +#define _DT_BINDINGS_CLK_MSM_RPMCC_H + +/* RPM clocks */ +#define RPM_PXO_CLK 0 +#define RPM_PXO_A_CLK 1 +#define RPM_CXO_CLK 2 +#define RPM_CXO_A_CLK 3 +#define RPM_APPS_FABRIC_CLK 4 +#define RPM_APPS_FABRIC_A_CLK 5 +#define RPM_CFPB_CLK 6 +#define RPM_CFPB_A_CLK 7 +#define RPM_QDSS_CLK 8 +#define RPM_QDSS_A_CLK 9 +#define RPM_DAYTONA_FABRIC_CLK 10 +#define RPM_DAYTONA_FABRIC_A_CLK 11 +#define RPM_EBI1_CLK 12 +#define RPM_EBI1_A_CLK 13 +#define RPM_MM_FABRIC_CLK 14 +#define RPM_MM_FABRIC_A_CLK 15 +#define RPM_MMFPB_CLK 16 +#define RPM_MMFPB_A_CLK 17 +#define RPM_SYS_FABRIC_CLK 18 +#define RPM_SYS_FABRIC_A_CLK 19 +#define RPM_SFPB_CLK 20 +#define RPM_SFPB_A_CLK 21 +#define RPM_SMI_CLK 22 +#define RPM_SMI_A_CLK 23 +#define RPM_PLL4_CLK 24 +#define RPM_XO_D0 25 +#define RPM_XO_D1 26 +#define RPM_XO_A0 27 +#define RPM_XO_A1 28 +#define RPM_XO_A2 29 +#define RPM_NSS_FABRIC_0_CLK 30 +#define RPM_NSS_FABRIC_0_A_CLK 31 +#define RPM_NSS_FABRIC_1_CLK 32 +#define RPM_NSS_FABRIC_1_A_CLK 33 + +/* SMD RPM clocks */ +#define RPM_SMD_XO_CLK_SRC 0 +#define RPM_SMD_XO_A_CLK_SRC 1 +#define RPM_SMD_PCNOC_CLK 2 +#define RPM_SMD_PCNOC_A_CLK 3 +#define RPM_SMD_SNOC_CLK 4 +#define RPM_SMD_SNOC_A_CLK 5 +#define RPM_SMD_BIMC_CLK 6 +#define RPM_SMD_BIMC_A_CLK 7 +#define RPM_SMD_QDSS_CLK 8 +#define RPM_SMD_QDSS_A_CLK 9 +#define RPM_SMD_BB_CLK1 10 +#define RPM_SMD_BB_CLK1_A 11 +#define RPM_SMD_BB_CLK2 12 +#define RPM_SMD_BB_CLK2_A 13 +#define RPM_SMD_RF_CLK1 14 +#define RPM_SMD_RF_CLK1_A 15 +#define RPM_SMD_RF_CLK2 16 +#define RPM_SMD_RF_CLK2_A 17 +#define RPM_SMD_BB_CLK1_PIN 18 +#define RPM_SMD_BB_CLK1_A_PIN 19 +#define RPM_SMD_BB_CLK2_PIN 20 +#define RPM_SMD_BB_CLK2_A_PIN 21 +#define RPM_SMD_RF_CLK1_PIN 22 +#define RPM_SMD_RF_CLK1_A_PIN 23 +#define RPM_SMD_RF_CLK2_PIN 24 +#define RPM_SMD_RF_CLK2_A_PIN 25 +#define RPM_SMD_PNOC_CLK 26 +#define RPM_SMD_PNOC_A_CLK 27 +#define RPM_SMD_CNOC_CLK 28 +#define RPM_SMD_CNOC_A_CLK 29 +#define RPM_SMD_MMSSNOC_AHB_CLK 30 +#define RPM_SMD_MMSSNOC_AHB_A_CLK 31 +#define RPM_SMD_GFX3D_CLK_SRC 32 +#define RPM_SMD_GFX3D_A_CLK_SRC 33 +#define RPM_SMD_OCMEMGX_CLK 34 +#define RPM_SMD_OCMEMGX_A_CLK 35 +#define RPM_SMD_CXO_D0 36 +#define RPM_SMD_CXO_D0_A 37 +#define RPM_SMD_CXO_D1 38 +#define RPM_SMD_CXO_D1_A 39 +#define RPM_SMD_CXO_A0 40 +#define RPM_SMD_CXO_A0_A 41 +#define RPM_SMD_CXO_A1 42 +#define RPM_SMD_CXO_A1_A 43 +#define RPM_SMD_CXO_A2 44 +#define RPM_SMD_CXO_A2_A 45 +#define RPM_SMD_DIV_CLK1 46 +#define RPM_SMD_DIV_A_CLK1 47 +#define RPM_SMD_DIV_CLK2 48 +#define RPM_SMD_DIV_A_CLK2 49 +#define RPM_SMD_DIFF_CLK 50 +#define RPM_SMD_DIFF_A_CLK 51 +#define RPM_SMD_CXO_D0_PIN 52 +#define RPM_SMD_CXO_D0_A_PIN 53 +#define RPM_SMD_CXO_D1_PIN 54 +#define RPM_SMD_CXO_D1_A_PIN 55 +#define RPM_SMD_CXO_A0_PIN 56 +#define RPM_SMD_CXO_A0_A_PIN 57 +#define RPM_SMD_CXO_A1_PIN 58 +#define RPM_SMD_CXO_A1_A_PIN 59 +#define RPM_SMD_CXO_A2_PIN 60 +#define RPM_SMD_CXO_A2_A_PIN 61 +#define RPM_SMD_AGGR1_NOC_CLK 62 +#define RPM_SMD_AGGR1_NOC_A_CLK 63 +#define RPM_SMD_AGGR2_NOC_CLK 64 +#define RPM_SMD_AGGR2_NOC_A_CLK 65 +#define RPM_SMD_MMAXI_CLK 66 +#define RPM_SMD_MMAXI_A_CLK 67 +#define RPM_SMD_IPA_CLK 68 +#define RPM_SMD_IPA_A_CLK 69 +#define RPM_SMD_CE1_CLK 70 +#define RPM_SMD_CE1_A_CLK 71 +#define RPM_SMD_DIV_CLK3 72 +#define RPM_SMD_DIV_A_CLK3 73 +#define RPM_SMD_LN_BB_CLK 74 +#define RPM_SMD_LN_BB_A_CLK 75 +#define RPM_SMD_BIMC_GPU_CLK 76 +#define RPM_SMD_BIMC_GPU_A_CLK 77 +#define RPM_SMD_QPIC_CLK 78 +#define RPM_SMD_QPIC_CLK_A 79 +#define RPM_SMD_LN_BB_CLK1 80 +#define RPM_SMD_LN_BB_CLK1_A 81 +#define RPM_SMD_LN_BB_CLK2 82 +#define RPM_SMD_LN_BB_CLK2_A 83 +#define RPM_SMD_LN_BB_CLK3_PIN 84 +#define RPM_SMD_LN_BB_CLK3_A_PIN 85 +#define RPM_SMD_RF_CLK3 86 +#define RPM_SMD_RF_CLK3_A 87 +#define RPM_SMD_RF_CLK3_PIN 88 +#define RPM_SMD_RF_CLK3_A_PIN 89 +#define RPM_SMD_MMSSNOC_AXI_CLK 90 +#define RPM_SMD_MMSSNOC_AXI_CLK_A 91 +#define RPM_SMD_CNOC_PERIPH_CLK 92 +#define RPM_SMD_CNOC_PERIPH_A_CLK 93 +#define RPM_SMD_LN_BB_CLK3 94 +#define RPM_SMD_LN_BB_CLK3_A 95 +#define RPM_SMD_LN_BB_CLK1_PIN 96 +#define RPM_SMD_LN_BB_CLK1_A_PIN 97 +#define RPM_SMD_LN_BB_CLK2_PIN 98 +#define RPM_SMD_LN_BB_CLK2_A_PIN 99 +#define RPM_SMD_SYSMMNOC_CLK 100 +#define RPM_SMD_SYSMMNOC_A_CLK 101 +#define RPM_SMD_CE2_CLK 102 +#define RPM_SMD_CE2_A_CLK 103 +#define RPM_SMD_CE3_CLK 104 +#define RPM_SMD_CE3_A_CLK 105 +#define RPM_SMD_QUP_CLK 106 +#define RPM_SMD_QUP_A_CLK 107 +#define RPM_SMD_MMRT_CLK 108 +#define RPM_SMD_MMRT_A_CLK 109 +#define RPM_SMD_MMNRT_CLK 110 +#define RPM_SMD_MMNRT_A_CLK 111 +#define RPM_SMD_SNOC_PERIPH_CLK 112 +#define RPM_SMD_SNOC_PERIPH_A_CLK 113 +#define RPM_SMD_SNOC_LPASS_CLK 114 +#define RPM_SMD_SNOC_LPASS_A_CLK 115 +#define RPM_SMD_HWKM_CLK 116 +#define RPM_SMD_HWKM_A_CLK 117 +#define RPM_SMD_PKA_CLK 118 +#define RPM_SMD_PKA_A_CLK 119 +#define RPM_SMD_CPUSS_GNOC_CLK 120 +#define RPM_SMD_CPUSS_GNOC_A_CLK 121 +#define RPM_SMD_MSS_CFG_AHB_CLK 122 +#define RPM_SMD_MSS_CFG_AHB_A_CLK 123 +#define RPM_SMD_BIMC_FREQ_LOG 124 +#define RPM_SMD_LN_BB_CLK_PIN 125 +#define RPM_SMD_LN_BB_A_CLK_PIN 126 + +#endif diff --git a/include/dt-bindings/interconnect/qcom,msm8916.h b/include/dt-bindings/interconnect/qcom,msm8916.h new file mode 100644 index 000000000000..359a75feb198 --- /dev/null +++ b/include/dt-bindings/interconnect/qcom,msm8916.h @@ -0,0 +1,100 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Qualcomm interconnect IDs + * + * Copyright (c) 2019, Linaro Ltd. + * Author: Georgi Djakov + */ + +#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_MSM8916_H +#define __DT_BINDINGS_INTERCONNECT_QCOM_MSM8916_H + +#define BIMC_SNOC_SLV 0 +#define MASTER_JPEG 1 +#define MASTER_MDP_PORT0 2 +#define MASTER_QDSS_BAM 3 +#define MASTER_QDSS_ETR 4 +#define MASTER_SNOC_CFG 5 +#define MASTER_VFE 6 +#define MASTER_VIDEO_P0 7 +#define SNOC_MM_INT_0 8 +#define SNOC_MM_INT_1 9 +#define SNOC_MM_INT_2 10 +#define SNOC_MM_INT_BIMC 11 +#define PCNOC_SNOC_SLV 12 +#define SLAVE_APSS 13 +#define SLAVE_CATS_128 14 +#define SLAVE_OCMEM_64 15 +#define SLAVE_IMEM 16 +#define SLAVE_QDSS_STM 17 +#define SLAVE_SRVC_SNOC 18 +#define SNOC_BIMC_0_MAS 19 +#define SNOC_BIMC_1_MAS 20 +#define SNOC_INT_0 21 +#define SNOC_INT_1 22 +#define SNOC_INT_BIMC 23 +#define SNOC_PCNOC_MAS 24 +#define SNOC_QDSS_INT 25 + +#define BIMC_SNOC_MAS 0 +#define MASTER_AMPSS_M0 1 +#define MASTER_GRAPHICS_3D 2 +#define MASTER_TCU0 3 +#define MASTER_TCU1 4 +#define SLAVE_AMPSS_L2 5 +#define SLAVE_EBI_CH0 6 +#define SNOC_BIMC_0_SLV 7 +#define SNOC_BIMC_1_SLV 8 + +#define MASTER_BLSP_1 0 +#define MASTER_DEHR 1 +#define MASTER_LPASS 2 +#define MASTER_CRYPTO_CORE0 3 +#define MASTER_SDCC_1 4 +#define MASTER_SDCC_2 5 +#define MASTER_SPDM 6 +#define MASTER_USB_HS 7 +#define PCNOC_INT_0 8 +#define PCNOC_INT_1 9 +#define PCNOC_MAS_0 10 +#define PCNOC_MAS_1 11 +#define PCNOC_SLV_0 12 +#define PCNOC_SLV_1 13 +#define PCNOC_SLV_2 14 +#define PCNOC_SLV_3 15 +#define PCNOC_SLV_4 16 +#define PCNOC_SLV_8 17 +#define PCNOC_SLV_9 18 +#define PCNOC_SNOC_MAS 19 +#define SLAVE_BIMC_CFG 20 +#define SLAVE_BLSP_1 21 +#define SLAVE_BOOT_ROM 22 +#define SLAVE_CAMERA_CFG 23 +#define SLAVE_CLK_CTL 24 +#define SLAVE_CRYPTO_0_CFG 25 +#define SLAVE_DEHR_CFG 26 +#define SLAVE_DISPLAY_CFG 27 +#define SLAVE_GRAPHICS_3D_CFG 28 +#define SLAVE_IMEM_CFG 29 +#define SLAVE_LPASS 30 +#define SLAVE_MPM 31 +#define SLAVE_MSG_RAM 32 +#define SLAVE_MSS 33 +#define SLAVE_PDM 34 +#define SLAVE_PMIC_ARB 35 +#define SLAVE_PCNOC_CFG 36 +#define SLAVE_PRNG 37 +#define SLAVE_QDSS_CFG 38 +#define SLAVE_RBCPR_CFG 39 +#define SLAVE_SDCC_1 40 +#define SLAVE_SDCC_2 41 +#define SLAVE_SECURITY 42 +#define SLAVE_SNOC_CFG 43 +#define SLAVE_SPDM 44 +#define SLAVE_TCSR 45 +#define SLAVE_TLMM 46 +#define SLAVE_USB_HS 47 +#define SLAVE_VENUS_CFG 48 +#define SNOC_PCNOC_SLV 49 + +#endif diff --git a/include/dt-bindings/reset/qcom,gcc-msm8916.h b/include/dt-bindings/reset/qcom,gcc-msm8916.h new file mode 100644 index 000000000000..1f9be10872df --- /dev/null +++ b/include/dt-bindings/reset/qcom,gcc-msm8916.h @@ -0,0 +1,100 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright 2015 Linaro Limited + */ + +#ifndef _DT_BINDINGS_RESET_MSM_GCC_8916_H +#define _DT_BINDINGS_RESET_MSM_GCC_8916_H + +#define GCC_BLSP1_BCR 0 +#define GCC_BLSP1_QUP1_BCR 1 +#define GCC_BLSP1_UART1_BCR 2 +#define GCC_BLSP1_QUP2_BCR 3 +#define GCC_BLSP1_UART2_BCR 4 +#define GCC_BLSP1_QUP3_BCR 5 +#define GCC_BLSP1_QUP4_BCR 6 +#define GCC_BLSP1_QUP5_BCR 7 +#define GCC_BLSP1_QUP6_BCR 8 +#define GCC_IMEM_BCR 9 +#define GCC_SMMU_BCR 10 +#define GCC_APSS_TCU_BCR 11 +#define GCC_SMMU_XPU_BCR 12 +#define GCC_PCNOC_TBU_BCR 13 +#define GCC_PRNG_BCR 14 +#define GCC_BOOT_ROM_BCR 15 +#define GCC_CRYPTO_BCR 16 +#define GCC_SEC_CTRL_BCR 17 +#define GCC_AUDIO_CORE_BCR 18 +#define GCC_ULT_AUDIO_BCR 19 +#define GCC_DEHR_BCR 20 +#define GCC_SYSTEM_NOC_BCR 21 +#define GCC_PCNOC_BCR 22 +#define GCC_TCSR_BCR 23 +#define GCC_QDSS_BCR 24 +#define GCC_DCD_BCR 25 +#define GCC_MSG_RAM_BCR 26 +#define GCC_MPM_BCR 27 +#define GCC_SPMI_BCR 28 +#define GCC_SPDM_BCR 29 +#define GCC_MM_SPDM_BCR 30 +#define GCC_BIMC_BCR 31 +#define GCC_RBCPR_BCR 32 +#define GCC_TLMM_BCR 33 +#define GCC_USB_HS_BCR 34 +#define GCC_USB2A_PHY_BCR 35 +#define GCC_SDCC1_BCR 36 +#define GCC_SDCC2_BCR 37 +#define GCC_PDM_BCR 38 +#define GCC_SNOC_BUS_TIMEOUT0_BCR 39 +#define GCC_PCNOC_BUS_TIMEOUT0_BCR 40 +#define GCC_PCNOC_BUS_TIMEOUT1_BCR 41 +#define GCC_PCNOC_BUS_TIMEOUT2_BCR 42 +#define GCC_PCNOC_BUS_TIMEOUT3_BCR 43 +#define GCC_PCNOC_BUS_TIMEOUT4_BCR 44 +#define GCC_PCNOC_BUS_TIMEOUT5_BCR 45 +#define GCC_PCNOC_BUS_TIMEOUT6_BCR 46 +#define GCC_PCNOC_BUS_TIMEOUT7_BCR 47 +#define GCC_PCNOC_BUS_TIMEOUT8_BCR 48 +#define GCC_PCNOC_BUS_TIMEOUT9_BCR 49 +#define GCC_MMSS_BCR 50 +#define GCC_VENUS0_BCR 51 +#define GCC_MDSS_BCR 52 +#define GCC_CAMSS_PHY0_BCR 53 +#define GCC_CAMSS_CSI0_BCR 54 +#define GCC_CAMSS_CSI0PHY_BCR 55 +#define GCC_CAMSS_CSI0RDI_BCR 56 +#define GCC_CAMSS_CSI0PIX_BCR 57 +#define GCC_CAMSS_PHY1_BCR 58 +#define GCC_CAMSS_CSI1_BCR 59 +#define GCC_CAMSS_CSI1PHY_BCR 60 +#define GCC_CAMSS_CSI1RDI_BCR 61 +#define GCC_CAMSS_CSI1PIX_BCR 62 +#define GCC_CAMSS_ISPIF_BCR 63 +#define GCC_CAMSS_CCI_BCR 64 +#define GCC_CAMSS_MCLK0_BCR 65 +#define GCC_CAMSS_MCLK1_BCR 66 +#define GCC_CAMSS_GP0_BCR 67 +#define GCC_CAMSS_GP1_BCR 68 +#define GCC_CAMSS_TOP_BCR 69 +#define GCC_CAMSS_MICRO_BCR 70 +#define GCC_CAMSS_JPEG_BCR 71 +#define GCC_CAMSS_VFE_BCR 72 +#define GCC_CAMSS_CSI_VFE0_BCR 73 +#define GCC_OXILI_BCR 74 +#define GCC_GMEM_BCR 75 +#define GCC_CAMSS_AHB_BCR 76 +#define GCC_MDP_TBU_BCR 77 +#define GCC_GFX_TBU_BCR 78 +#define GCC_GFX_TCU_BCR 79 +#define GCC_MSS_TBU_AXI_BCR 80 +#define GCC_MSS_TBU_GSS_AXI_BCR 81 +#define GCC_MSS_TBU_Q6_AXI_BCR 82 +#define GCC_GTCU_AHB_BCR 83 +#define GCC_SMMU_CFG_BCR 84 +#define GCC_VFE_TBU_BCR 85 +#define GCC_VENUS_TBU_BCR 86 +#define GCC_JPEG_TBU_BCR 87 +#define GCC_PRONTO_TBU_BCR 88 +#define GCC_SMMU_CATS_BCR 89 + +#endif