From patchwork Thu Oct 26 05:30:47 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: AKASHI Takahiro X-Patchwork-Id: 738325 Delivered-To: patch@linaro.org Received: by 2002:adf:f842:0:b0:32d:baff:b0ca with SMTP id d2csp638711wrq; Wed, 25 Oct 2023 22:32:53 -0700 (PDT) X-Google-Smtp-Source: AGHT+IEectExuaaD1a6UMqcy5ObGdP/hqCp3m5vQvCFXcC/KakhHPQPwloebeCipyIFiRq1owlCC X-Received: by 2002:a05:6512:4014:b0:508:1975:5b1d with SMTP id br20-20020a056512401400b0050819755b1dmr3074710lfb.3.1698298373434; Wed, 25 Oct 2023 22:32:53 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1698298373; cv=none; d=google.com; s=arc-20160816; b=N8ptUJRmk414ZErGyRC3H8wgSVmsW+uZTe7UwoBcXyVvoeoVgqFTru0YmJlAbXRP1p xFd/fYmvmZ8Zo2WpJdkyw71z1ZBJue5J6WLJM6I4KXnF2RuE75QurqjxpUrS4uyy8Kw+ EuoFBrMBdaPxCPlWzPO57nyLvwm9DGjFwSSm/gZAol11Va2N23bQYUW23duyva7JSWUn lqA2+sDSIZ9BVGxHKG9IojwVaP+PtmHU7tCoh240U/rsPYVAAL6FsPKdqpS3psoIh49g yv6vYlMgoY7C8U4leUEu4UyCfgogop+Q7PJ7gTi4yZ+Kp0tfNQl7Az0mfGFv2Mcyh6ax +u+w== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=sender:errors-to:list-subscribe:list-help:list-post:list-archive :list-unsubscribe:list-id:precedence:content-transfer-encoding :mime-version:references:in-reply-to:message-id:date:subject:cc:to :from:dkim-signature; bh=Mp+jJdsybsFZl/y8I7LNTzhx+AD5dMlIqa+WWExkuyo=; fh=RsKNQde3hXRhkFNkXZDJxhxJUE2DI5qQDMHikPj4pmY=; b=w0O5Z7rfCcuNv8TsEOd4yFxBkrH/kNVome9DvUBBj/mwf/9fg+Beplgnulmjim2VwH B6d/0rEbNM1EWJvp2GRAngPXevbfmjLn2uOko4n6lkCrXVaPsrKYsOml9Rfuzjmh/fRx NzsiSinCxAX5xt1rpxo4tDmhlQr9zm/MypgX1fGByf3nHTws1xH/goa06tKuMryl98pm fuoICl/mRxOY3D/hrx0RDCDfAyZNvyrSkJdE5+yfIjBfCZePxerzT3PWB/B6epGmXp0+ kZmN/jTz4dejUVgxPuB93mquaPNbxKU4iSXAKfKRhfYGS3xmT2RXo83DEa/dIqpi6izC e8BQ== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=jbdCRyJI; spf=pass (google.com: domain of u-boot-bounces@lists.denx.de designates 2a01:238:438b:c500:173d:9f52:ddab:ee01 as permitted sender) smtp.mailfrom=u-boot-bounces@lists.denx.de; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from phobos.denx.de (phobos.denx.de. [2a01:238:438b:c500:173d:9f52:ddab:ee01]) by mx.google.com with ESMTPS id m11-20020a056000024b00b003247a95fbaesi8345315wrz.411.2023.10.25.22.32.52 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 25 Oct 2023 22:32:53 -0700 (PDT) Received-SPF: pass (google.com: domain of u-boot-bounces@lists.denx.de designates 2a01:238:438b:c500:173d:9f52:ddab:ee01 as permitted sender) client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=jbdCRyJI; spf=pass (google.com: domain of u-boot-bounces@lists.denx.de designates 2a01:238:438b:c500:173d:9f52:ddab:ee01 as permitted sender) smtp.mailfrom=u-boot-bounces@lists.denx.de; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id CB3E787B25; Thu, 26 Oct 2023 07:31:47 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=pass (2048-bit key; unprotected) header.d=linaro.org header.i=@linaro.org header.b="jbdCRyJI"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id 4FEBE87B28; Thu, 26 Oct 2023 07:31:44 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_NONE,SPF_PASS autolearn=ham autolearn_force=no version=3.4.2 Received: from mail-pf1-x42b.google.com (mail-pf1-x42b.google.com [IPv6:2607:f8b0:4864:20::42b]) (using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 1050287B17 for ; Thu, 26 Oct 2023 07:31:40 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=takahiro.akashi@linaro.org Received: by mail-pf1-x42b.google.com with SMTP id d2e1a72fcca58-6bbfb8f7ac4so121642b3a.0 for ; Wed, 25 Oct 2023 22:31:39 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1698298298; x=1698903098; darn=lists.denx.de; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=Mp+jJdsybsFZl/y8I7LNTzhx+AD5dMlIqa+WWExkuyo=; b=jbdCRyJIPwCpwpi+4JBszCN8XOZA+lmquN3uDYbG6qbLlx0EbJ+wGj1DL0FUOj2ao6 17jHA1rTOdmp0KEFVYDvYR/uxHWuhD+3Px6zC8sC6V5XQFSFseD2+9YLv9y8rFcLP1wK 1i1mV0SfofF6lxDy2BozByexJI+UIpZCKvSSRhGHy/tm7HuUSSTSbks4tokLIjgSzSQd O/6X6pPEBy4+qhmCDHy5GgvwY/nSnO5l0OJSMs6VpF9+mDwfzVK5zMPWnNrJukBNTzu/ C/hWa/oOiSt/E1zjNTL34gvMsUx4Z3wEbnEWgzr6+cZldr5iRhw15/HcBbiVW57NsInp STmw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1698298298; x=1698903098; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=Mp+jJdsybsFZl/y8I7LNTzhx+AD5dMlIqa+WWExkuyo=; b=vLnpb5dfIlCGTlVNbhbDpA9TenXpS1SaFOJkP8bOCtIlrLYp1BELZs5zLOD2DWyp5Y oajj2g1nYq6IZm+81fkrlyAa5FqNBS1mG9RxKJA7ra9qdZRpgnMFxI0EAdYLdflVqs+S tBhwP72oVg3vSL/8TLAxAj8gRuzUoVMisuXOjvY382dczJGO5b8LB/b0IB0yAWS+pmfS cxPDv+Fcumz9OaLN7J0AAjRY3WLMX3Hm54v1iLHhjcWCkJu6pseWnNECSYEA48KvouPz g+oMBXSAJWBOWYiC9CRg8Ry8l67pxMI98745V8p6HHwNSVo88L919LZFnZll/Z8iCmXQ 3paA== X-Gm-Message-State: AOJu0YzhtjTg3cqO3bqZyrR0iSJ7NogzABdQEtOb49mElcUiHqmauKGZ u2otFZSR4WgI2tdD/2+2R3zUgSBb/yIwQfvw8RxP+g== X-Received: by 2002:a05:6a21:3286:b0:163:ab09:196d with SMTP id yt6-20020a056a21328600b00163ab09196dmr20200338pzb.1.1698298297975; Wed, 25 Oct 2023 22:31:37 -0700 (PDT) Received: from octopus.. ([2400:4050:c3e1:100:bca9:3af7:89e9:80b7]) by smtp.gmail.com with ESMTPSA id fa13-20020a056a002d0d00b006c06804cd39sm440715pfb.153.2023.10.25.22.31.35 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 25 Oct 2023 22:31:37 -0700 (PDT) From: AKASHI Takahiro To: trini@konsulko.com, sjg@chromium.org, xypron.glpk@gmx.de, ilias.apalodimas@linaro.org Cc: jbx6244@gmail.com, u-boot@lists.denx.de, AKASHI Takahiro Subject: [RFC 08/13] efi_loader: split unrelated code from efi_bootmgr.c Date: Thu, 26 Oct 2023 14:30:47 +0900 Message-Id: <20231026053052.622453-9-takahiro.akashi@linaro.org> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20231026053052.622453-1-takahiro.akashi@linaro.org> References: <20231026053052.622453-1-takahiro.akashi@linaro.org> MIME-Version: 1.0 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de X-Virus-Status: Clean Some code moved from cmd/bootefi.c is actually necessary only for "bootefi " command (starting an image manually loaded by a user using U-Boot load commands or other methods (like JTAG debugger). The code will never been opted out as unused code by a compiler which doesn't know how EFI boot manager is implemented. So introduce a new configuration, CONFIG_EFI_BINARY_EXEC, to enforce theem opted out explicitly. Signed-off-by: AKASHI Takahiro --- boot/Kconfig | 4 +- cmd/Kconfig | 6 +- include/efi_loader.h | 28 +- lib/efi_loader/Kconfig | 9 + lib/efi_loader/efi_bootmgr.c | 480 ------------------------------ lib/efi_loader/efi_device_path.c | 3 +- lib/efi_loader/efi_helper.c | 486 ++++++++++++++++++++++++++++++- 7 files changed, 516 insertions(+), 500 deletions(-) diff --git a/boot/Kconfig b/boot/Kconfig index a441fac8ade1..d371d0a25962 100644 --- a/boot/Kconfig +++ b/boot/Kconfig @@ -511,7 +511,7 @@ config BOOTMETH_EXTLINUX_PXE config BOOTMETH_EFILOADER bool "Bootdev support for EFI boot" - depends on BOOTEFI_BOOTMGR + depends on EFI_BINARY_EXEC default y help Enables support for EFI boot using bootdevs. This makes the @@ -546,7 +546,7 @@ config BOOTMETH_DISTRO select BOOTMETH_SCRIPT if CMDLINE # E.g. Armbian uses scripts select BOOTMETH_EXTLINUX # E.g. Debian uses these select BOOTMETH_EXTLINUX_PXE if CMD_PXE && CMD_NET && DM_ETH - select BOOTMETH_EFILOADER if BOOTEFI_BOOTMGR # E.g. Ubuntu uses this + select BOOTMETH_EFILOADER if EFI_BINARY_EXEC # E.g. Ubuntu uses this config SPL_BOOTMETH_VBE bool "Bootdev support for Verified Boot for Embedded (SPL)" diff --git a/cmd/Kconfig b/cmd/Kconfig index 81e959c96207..bf16fad04d37 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -274,7 +274,7 @@ config CMD_BOOTMETH config BOOTM_EFI bool "Support booting UEFI FIT images" - depends on BOOTEFI_BOOTMGR && CMD_BOOTM && FIT + depends on EFI_BINARY_EXEC && CMD_BOOTM && FIT default y help Support booting UEFI FIT images via the bootm command. @@ -366,7 +366,7 @@ config CMD_BOOTEFI if CMD_BOOTEFI config CMD_BOOTEFI_BINARY bool "Allow booting an EFI binary directly" - depends on BOOTEFI_BOOTMGR + depends on EFI_BINARY_EXEC default y help Select this option to enable direct execution of binary at 'bootefi'. @@ -397,7 +397,7 @@ config CMD_BOOTEFI_HELLO_COMPILE config CMD_BOOTEFI_HELLO bool "Allow booting a standard EFI hello world for testing" - depends on CMD_BOOTEFI_HELLO_COMPILE + depends on CMD_BOOTEFI_BINARY && CMD_BOOTEFI_HELLO_COMPILE default y if CMD_BOOTEFI_SELFTEST help This adds a standard EFI hello world application to U-Boot so that diff --git a/include/efi_loader.h b/include/efi_loader.h index 031a8f76846a..e9bc2f540cc8 100644 --- a/include/efi_loader.h +++ b/include/efi_loader.h @@ -91,11 +91,7 @@ efi_status_t efi_add_runtime_mmio(void *mmio_ptr, u64 len); * back to u-boot world */ void efi_restore_gd(void); -/* Call this to unset the current device name */ -void efi_clear_bootdev(void); -/* Call this to set the current device name */ -void efi_set_bootdev(const char *dev, const char *devnr, const char *path, - void *buffer, size_t buffer_size); + /* Called by networking code to memorize the dhcp ack package */ void efi_net_set_dhcp_ack(void *pkt, int len); /* Print information about all loaded images */ @@ -117,10 +113,6 @@ static inline efi_status_t efi_add_runtime_mmio(void *mmio_ptr, u64 len) /* No loader configured, stub out EFI_ENTRY */ static inline void efi_restore_gd(void) { } -static inline void efi_clear_bootdev(void) { } -static inline void efi_set_bootdev(const char *dev, const char *devnr, - const char *path, void *buffer, - size_t buffer_size) { } static inline void efi_net_set_dhcp_ack(void *pkt, int len) { } static inline void efi_print_image_infos(void *pc) { } static inline efi_status_t efi_launch_capsules(void) @@ -130,6 +122,20 @@ static inline efi_status_t efi_launch_capsules(void) #endif /* CONFIG_IS_ENABLED(EFI_LOADER) */ +#if CONFIG_IS_ENABLED(EFI_BINARY_EXEC) +/* Call this to unset the current device name */ +void efi_clear_bootdev(void); +/* Call this to set the current device name */ +void efi_set_bootdev(const char *dev, const char *devnr, const char *path, + void *buffer, size_t buffer_size); +#else +static inline void efi_clear_bootdev(void) { } + +static inline void efi_set_bootdev(const char *dev, const char *devnr, + const char *path, void *buffer, + size_t buffer_size) { } +#endif + /* Maximum number of configuration tables */ #define EFI_MAX_CONFIGURATION_TABLES 16 @@ -540,8 +546,8 @@ efi_status_t efi_env_set_load_options(efi_handle_t handle, const char *env_var, u16 **load_options); /* Install device tree */ efi_status_t efi_install_fdt(void *fdt); -/* Run loaded UEFI image */ -efi_status_t efi_run_image(void *source_buffer, efi_uintn_t source_size); +/* Execute loaded UEFI image */ +efi_status_t do_bootefi_exec(efi_handle_t handle, void *load_options); /* Run loaded UEFI image with given fdt */ efi_status_t efi_binary_run(void *image, size_t size, void *fdt); /* Initialize variable services */ diff --git a/lib/efi_loader/Kconfig b/lib/efi_loader/Kconfig index 13cad6342c36..987a990509f3 100644 --- a/lib/efi_loader/Kconfig +++ b/lib/efi_loader/Kconfig @@ -32,6 +32,15 @@ config EFI_LOADER if EFI_LOADER +config EFI_BINARY_EXEC + bool "Execute UEFI binary" + default y + help + Select this option if you want to execute the UEFI binary after + loading it with U-Boot load commands or other methods. + You may enable CMD_BOOTEFI_BINARY so that you can use bootefi + command to do that. + config BOOTEFI_BOOTMGR bool "UEFI Boot Manager" default y diff --git a/lib/efi_loader/efi_bootmgr.c b/lib/efi_loader/efi_bootmgr.c index cc8d88b4b025..06799277f5b5 100644 --- a/lib/efi_loader/efi_bootmgr.c +++ b/lib/efi_loader/efi_bootmgr.c @@ -3,8 +3,6 @@ * EFI boot manager * * Copyright (c) 2017 Rob Clark - * For the code moved from cmd/bootefi.c - * Copyright (c) 2016 Alexander Graf */ #define LOG_CATEGORY LOGC_EFI @@ -18,17 +16,6 @@ #include #include -/* TODO: temporarily added here; clean up later */ -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - static const struct efi_boot_services *bs; static const struct efi_runtime_services *rs; @@ -743,377 +730,6 @@ out: return ret; } -static struct efi_device_path *bootefi_image_path; -static struct efi_device_path *bootefi_device_path; -static void *image_addr; -static size_t image_size; - -/** - * efi_get_image_parameters() - return image parameters - * - * @img_addr: address of loaded image in memory - * @img_size: size of loaded image - */ -void efi_get_image_parameters(void **img_addr, size_t *img_size) -{ - *img_addr = image_addr; - *img_size = image_size; -} - -/** - * efi_clear_bootdev() - clear boot device - */ -void efi_clear_bootdev(void) -{ - efi_free_pool(bootefi_device_path); - efi_free_pool(bootefi_image_path); - bootefi_device_path = NULL; - bootefi_image_path = NULL; - image_addr = NULL; - image_size = 0; -} - -/** - * efi_set_bootdev() - set boot device - * - * This function is called when a file is loaded, e.g. via the 'load' command. - * We use the path to this file to inform the UEFI binary about the boot device. - * - * @dev: device, e.g. "MMC" - * @devnr: number of the device, e.g. "1:2" - * @path: path to file loaded - * @buffer: buffer with file loaded - * @buffer_size: size of file loaded - */ -void efi_set_bootdev(const char *dev, const char *devnr, const char *path, - void *buffer, size_t buffer_size) -{ - struct efi_device_path *device, *image; - efi_status_t ret; - - log_debug("dev=%s, devnr=%s, path=%s, buffer=%p, size=%zx\n", dev, - devnr, path, buffer, buffer_size); - - /* Forget overwritten image */ - if (buffer + buffer_size >= image_addr && - image_addr + image_size >= buffer) - efi_clear_bootdev(); - - /* Remember only PE-COFF and FIT images */ - if (efi_check_pe(buffer, buffer_size, NULL) != EFI_SUCCESS) { - if (IS_ENABLED(CONFIG_FIT) && - !fit_check_format(buffer, IMAGE_SIZE_INVAL)) { - /* - * FIT images of type EFI_OS are started via command - * bootm. We should not use their boot device with the - * bootefi command. - */ - buffer = 0; - buffer_size = 0; - } else { - log_debug("- not remembering image\n"); - return; - } - } - - /* efi_set_bootdev() is typically called repeatedly, recover memory */ - efi_clear_bootdev(); - - image_addr = buffer; - image_size = buffer_size; - - ret = efi_dp_from_name(dev, devnr, path, &device, &image); - if (ret == EFI_SUCCESS) { - bootefi_device_path = device; - if (image) { - /* FIXME: image should not contain device */ - struct efi_device_path *image_tmp = image; - - efi_dp_split_file_path(image, &device, &image); - efi_free_pool(image_tmp); - } - bootefi_image_path = image; - log_debug("- boot device %pD\n", device); - if (image) - log_debug("- image %pD\n", image); - } else { - log_debug("- efi_dp_from_name() failed, err=%lx\n", ret); - efi_clear_bootdev(); - } -} - -/** - * efi_env_set_load_options() - set load options from environment variable - * - * @handle: the image handle - * @env_var: name of the environment variable - * @load_options: pointer to load options (output) - * Return: status code - */ -efi_status_t efi_env_set_load_options(efi_handle_t handle, - const char *env_var, - u16 **load_options) -{ - const char *env = env_get(env_var); - size_t size; - u16 *pos; - efi_status_t ret; - - *load_options = NULL; - if (!env) - return EFI_SUCCESS; - size = sizeof(u16) * (utf8_utf16_strlen(env) + 1); - pos = calloc(size, 1); - if (!pos) - return EFI_OUT_OF_RESOURCES; - *load_options = pos; - utf8_utf16_strcpy(&pos, env); - ret = efi_set_load_options(handle, size, *load_options); - if (ret != EFI_SUCCESS) { - free(*load_options); - *load_options = NULL; - } - return ret; -} - -#if !CONFIG_IS_ENABLED(GENERATE_ACPI_TABLE) - -/** - * copy_fdt() - Copy the device tree to a new location available to EFI - * - * The FDT is copied to a suitable location within the EFI memory map. - * Additional 12 KiB are added to the space in case the device tree needs to be - * expanded later with fdt_open_into(). - * - * @fdtp: On entry a pointer to the flattened device tree. - * On exit a pointer to the copy of the flattened device tree. - * FDT start - * Return: status code - */ -static efi_status_t copy_fdt(void **fdtp) -{ - unsigned long fdt_ram_start = -1L, fdt_pages; - efi_status_t ret = 0; - void *fdt, *new_fdt; - u64 new_fdt_addr; - uint fdt_size; - int i; - - for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { - u64 ram_start = gd->bd->bi_dram[i].start; - u64 ram_size = gd->bd->bi_dram[i].size; - - if (!ram_size) - continue; - - if (ram_start < fdt_ram_start) - fdt_ram_start = ram_start; - } - - /* - * Give us at least 12 KiB of breathing room in case the device tree - * needs to be expanded later. - */ - fdt = *fdtp; - fdt_pages = efi_size_in_pages(fdt_totalsize(fdt) + 0x3000); - fdt_size = fdt_pages << EFI_PAGE_SHIFT; - - ret = efi_allocate_pages(EFI_ALLOCATE_ANY_PAGES, - EFI_ACPI_RECLAIM_MEMORY, fdt_pages, - &new_fdt_addr); - if (ret != EFI_SUCCESS) { - log_err("ERROR: Failed to reserve space for FDT\n"); - goto done; - } - new_fdt = (void *)(uintptr_t)new_fdt_addr; - memcpy(new_fdt, fdt, fdt_totalsize(fdt)); - fdt_set_totalsize(new_fdt, fdt_size); - - *fdtp = (void *)(uintptr_t)new_fdt_addr; -done: - return ret; -} - -/** - * get_config_table() - get configuration table - * - * @guid: GUID of the configuration table - * Return: pointer to configuration table or NULL - */ -static void *get_config_table(const efi_guid_t *guid) -{ - size_t i; - - for (i = 0; i < systab.nr_tables; i++) { - if (!guidcmp(guid, &systab.tables[i].guid)) - return systab.tables[i].table; - } - return NULL; -} - -#endif /* !CONFIG_IS_ENABLED(GENERATE_ACPI_TABLE) */ - -/** - * efi_install_fdt() - install device tree - * - * If fdt is not EFI_FDT_USE_INTERNAL, the device tree located at that memory - * address will be installed as configuration table, otherwise the device - * tree located at the address indicated by environment variable fdt_addr or as - * fallback fdtcontroladdr will be used. - * - * On architectures using ACPI tables device trees shall not be installed as - * configuration table. - * - * @fdt: address of device tree or EFI_FDT_USE_INTERNAL to use - * the hardware device tree as indicated by environment variable - * fdt_addr or as fallback the internal device tree as indicated by - * the environment variable fdtcontroladdr - * Return: status code - */ -efi_status_t efi_install_fdt(void *fdt) -{ - /* - * The EBBR spec requires that we have either an FDT or an ACPI table - * but not both. - */ -#if CONFIG_IS_ENABLED(GENERATE_ACPI_TABLE) - if (fdt) { - log_warning("WARNING: Can't have ACPI table and device tree - ignoring DT.\n"); - return EFI_SUCCESS; - } -#else - struct bootm_headers img = { 0 }; - efi_status_t ret; - - if (fdt == EFI_FDT_USE_INTERNAL) { - const char *fdt_opt; - uintptr_t fdt_addr; - - /* Look for device tree that is already installed */ - if (get_config_table(&efi_guid_fdt)) - return EFI_SUCCESS; - /* Check if there is a hardware device tree */ - fdt_opt = env_get("fdt_addr"); - /* Use our own device tree as fallback */ - if (!fdt_opt) { - fdt_opt = env_get("fdtcontroladdr"); - if (!fdt_opt) { - log_err("ERROR: need device tree\n"); - return EFI_NOT_FOUND; - } - } - fdt_addr = hextoul(fdt_opt, NULL); - if (!fdt_addr) { - log_err("ERROR: invalid $fdt_addr or $fdtcontroladdr\n"); - return EFI_LOAD_ERROR; - } - fdt = map_sysmem(fdt_addr, 0); - } - - /* Install device tree */ - if (fdt_check_header(fdt)) { - log_err("ERROR: invalid device tree\n"); - return EFI_LOAD_ERROR; - } - - /* Prepare device tree for payload */ - ret = copy_fdt(&fdt); - if (ret) { - log_err("ERROR: out of memory\n"); - return EFI_OUT_OF_RESOURCES; - } - - if (image_setup_libfdt(&img, fdt, 0, NULL)) { - log_err("ERROR: failed to process device tree\n"); - return EFI_LOAD_ERROR; - } - - /* Create memory reservations as indicated by the device tree */ - efi_carve_out_dt_rsv(fdt); - - efi_try_purge_kaslr_seed(fdt); - - if (CONFIG_IS_ENABLED(EFI_TCG2_PROTOCOL_MEASURE_DTB)) { - ret = efi_tcg2_measure_dtb(fdt); - if (ret == EFI_SECURITY_VIOLATION) { - log_err("ERROR: failed to measure DTB\n"); - return ret; - } - } - - /* Install device tree as UEFI table */ - ret = efi_install_configuration_table(&efi_guid_fdt, fdt); - if (ret != EFI_SUCCESS) { - log_err("ERROR: failed to install device tree\n"); - return ret; - } -#endif /* GENERATE_ACPI_TABLE */ - - return EFI_SUCCESS; -} - -/** - * do_bootefi_exec() - execute EFI binary - * - * The image indicated by @handle is started. When it returns the allocated - * memory for the @load_options is freed. - * - * @handle: handle of loaded image - * @load_options: load options - * Return: status code - * - * Load the EFI binary into a newly assigned memory unwinding the relocation - * information, install the loaded image protocol, and call the binary. - */ -static efi_status_t do_bootefi_exec(efi_handle_t handle, void *load_options) -{ - efi_status_t ret; - efi_uintn_t exit_data_size = 0; - u16 *exit_data = NULL; - - /* On ARM switch from EL3 or secure mode to EL2 or non-secure mode */ - switch_to_non_secure_mode(); - - /* - * The UEFI standard requires that the watchdog timer is set to five - * minutes when invoking an EFI boot option. - * - * Unified Extensible Firmware Interface (UEFI), version 2.7 Errata A - * 7.5. Miscellaneous Boot Services - EFI_BOOT_SERVICES.SetWatchdogTimer - */ - ret = efi_set_watchdog(300); - if (ret != EFI_SUCCESS) { - log_err("ERROR: Failed to set watchdog timer\n"); - goto out; - } - - /* Call our payload! */ - ret = EFI_CALL(efi_start_image(handle, &exit_data_size, &exit_data)); - if (ret != EFI_SUCCESS) { - log_err("## Application failed, r = %lu\n", - ret & ~EFI_ERROR_MASK); - if (exit_data) { - log_err("## %ls\n", exit_data); - efi_free_pool(exit_data); - } - } - - efi_restore_gd(); - -out: - free(load_options); - - if (IS_ENABLED(CONFIG_EFI_LOAD_FILE2_INITRD)) { - if (efi_initrd_deregister() != EFI_SUCCESS) - log_err("Failed to remove loadfile2 for initrd\n"); - } - - /* Control is returned to U-Boot, disable EFI watchdog */ - efi_set_watchdog(0); - - return ret; -} - /** * efi_bootmgr_run() - execute EFI boot manager * fdt: Flat device tree @@ -1150,99 +766,3 @@ efi_status_t efi_bootmgr_run(void *fdt) return do_bootefi_exec(handle, load_options); } - -/** - * efi_run_image() - run loaded UEFI image - * - * @source_buffer: memory address of the UEFI image - * @source_size: size of the UEFI image - * Return: status code - */ -efi_status_t efi_run_image(void *source_buffer, efi_uintn_t source_size) -{ - efi_handle_t mem_handle = NULL, handle; - struct efi_device_path *file_path = NULL; - struct efi_device_path *msg_path; - efi_status_t ret, ret2; - u16 *load_options; - - if (!bootefi_device_path || !bootefi_image_path) { - log_debug("Not loaded from disk\n"); - /* - * Special case for efi payload not loaded from disk, - * such as 'bootefi hello' or for example payload - * loaded directly into memory via JTAG, etc: - */ - file_path = efi_dp_from_mem(EFI_RESERVED_MEMORY_TYPE, - (uintptr_t)source_buffer, - source_size); - /* - * Make sure that device for device_path exist - * in load_image(). Otherwise, shell and grub will fail. - */ - ret = efi_install_multiple_protocol_interfaces(&mem_handle, - &efi_guid_device_path, - file_path, NULL); - if (ret != EFI_SUCCESS) - goto out; - msg_path = file_path; - } else { - file_path = efi_dp_append(bootefi_device_path, - bootefi_image_path); - msg_path = bootefi_image_path; - log_debug("Loaded from disk\n"); - } - - log_info("Booting %pD\n", msg_path); - - ret = EFI_CALL(efi_load_image(false, efi_root, file_path, source_buffer, - source_size, &handle)); - if (ret != EFI_SUCCESS) { - log_err("Loading image failed\n"); - goto out; - } - - /* Transfer environment variable as load options */ - ret = efi_env_set_load_options(handle, "bootargs", &load_options); - if (ret != EFI_SUCCESS) - goto out; - - ret = do_bootefi_exec(handle, load_options); - -out: - ret2 = efi_uninstall_multiple_protocol_interfaces(mem_handle, - &efi_guid_device_path, - file_path, NULL); - efi_free_pool(file_path); - return (ret != EFI_SUCCESS) ? ret : ret2; -} - -/** - * efi_binary_run() - run loaded UEFI image - * - * @image: memory address of the UEFI image - * @size: size of the UEFI image - * - * Execute an EFI binary image loaded at @image. - * @size may be zero if the binary is loaded with U-Boot load command. - * - * Return: status code - */ -efi_status_t efi_binary_run(void *image, size_t size, void *fdt) -{ - efi_status_t ret; - - /* Initialize EFI drivers */ - ret = efi_init_obj_list(); - if (ret != EFI_SUCCESS) { - log_err("Error: Cannot initialize UEFI sub-system, r = %lu\n", - ret & ~EFI_ERROR_MASK); - return -1; - } - - ret = efi_install_fdt(fdt); - if (ret != EFI_SUCCESS) - return ret; - - return efi_run_image(image, size); -} diff --git a/lib/efi_loader/efi_device_path.c b/lib/efi_loader/efi_device_path.c index ed7214f3a347..786d8a70e2ad 100644 --- a/lib/efi_loader/efi_device_path.c +++ b/lib/efi_loader/efi_device_path.c @@ -1090,7 +1090,8 @@ efi_status_t efi_dp_from_name(const char *dev, const char *devnr, if (path && !file) return EFI_INVALID_PARAMETER; - if (!strcmp(dev, "Mem") || !strcmp(dev, "hostfs")) { + if (IS_ENABLED(CONFIG_EFI_BINARY_EXEC) && + (!strcmp(dev, "Mem") || !strcmp(dev, "hostfs"))) { /* loadm command and semihosting */ efi_get_image_parameters(&image_addr, &image_size); diff --git a/lib/efi_loader/efi_helper.c b/lib/efi_loader/efi_helper.c index cdfd16ea7742..dd8c38f0cb5c 100644 --- a/lib/efi_loader/efi_helper.c +++ b/lib/efi_loader/efi_helper.c @@ -1,17 +1,28 @@ // SPDX-License-Identifier: GPL-2.0+ /* * Copyright (c) 2020, Linaro Limited + * For the code moved from cmd/bootefi.c + * Copyright (c) 2016 Alexander Graf */ #define LOG_CATEGORY LOGC_EFI +#include #include -#include -#include #include -#include #include #include #include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; #if defined(CONFIG_CMD_EFIDEBUG) || defined(CONFIG_EFI_LOAD_FILE2_INITRD) /* GUID used by Linux to identify the LoadFile2 protocol with the initrd */ @@ -282,3 +293,472 @@ bool efi_search_bootorder(u16 *bootorder, efi_uintn_t num, u32 target, u32 *inde return false; } + +#if !CONFIG_IS_ENABLED(GENERATE_ACPI_TABLE) + +/** + * copy_fdt() - Copy the device tree to a new location available to EFI + * + * The FDT is copied to a suitable location within the EFI memory map. + * Additional 12 KiB are added to the space in case the device tree needs to be + * expanded later with fdt_open_into(). + * + * @fdtp: On entry a pointer to the flattened device tree. + * On exit a pointer to the copy of the flattened device tree. + * FDT start + * Return: status code + */ +static efi_status_t copy_fdt(void **fdtp) +{ + unsigned long fdt_ram_start = -1L, fdt_pages; + efi_status_t ret = 0; + void *fdt, *new_fdt; + u64 new_fdt_addr; + uint fdt_size; + int i; + + for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { + u64 ram_start = gd->bd->bi_dram[i].start; + u64 ram_size = gd->bd->bi_dram[i].size; + + if (!ram_size) + continue; + + if (ram_start < fdt_ram_start) + fdt_ram_start = ram_start; + } + + /* + * Give us at least 12 KiB of breathing room in case the device tree + * needs to be expanded later. + */ + fdt = *fdtp; + fdt_pages = efi_size_in_pages(fdt_totalsize(fdt) + 0x3000); + fdt_size = fdt_pages << EFI_PAGE_SHIFT; + + ret = efi_allocate_pages(EFI_ALLOCATE_ANY_PAGES, + EFI_ACPI_RECLAIM_MEMORY, fdt_pages, + &new_fdt_addr); + if (ret != EFI_SUCCESS) { + log_err("ERROR: Failed to reserve space for FDT\n"); + goto done; + } + new_fdt = (void *)(uintptr_t)new_fdt_addr; + memcpy(new_fdt, fdt, fdt_totalsize(fdt)); + fdt_set_totalsize(new_fdt, fdt_size); + + *fdtp = (void *)(uintptr_t)new_fdt_addr; +done: + return ret; +} + +/** + * get_config_table() - get configuration table + * + * @guid: GUID of the configuration table + * Return: pointer to configuration table or NULL + */ +static void *get_config_table(const efi_guid_t *guid) +{ + size_t i; + + for (i = 0; i < systab.nr_tables; i++) { + if (!guidcmp(guid, &systab.tables[i].guid)) + return systab.tables[i].table; + } + return NULL; +} + +#endif /* !CONFIG_IS_ENABLED(GENERATE_ACPI_TABLE) */ + +/** + * efi_install_fdt() - install device tree + * + * If fdt is not EFI_FDT_USE_INTERNAL, the device tree located at that memory + * address will be installed as configuration table, otherwise the device + * tree located at the address indicated by environment variable fdt_addr or as + * fallback fdtcontroladdr will be used. + * + * On architectures using ACPI tables device trees shall not be installed as + * configuration table. + * + * @fdt: address of device tree or EFI_FDT_USE_INTERNAL to use + * the hardware device tree as indicated by environment variable + * fdt_addr or as fallback the internal device tree as indicated by + * the environment variable fdtcontroladdr + * Return: status code + */ +efi_status_t efi_install_fdt(void *fdt) +{ + /* + * The EBBR spec requires that we have either an FDT or an ACPI table + * but not both. + */ +#if CONFIG_IS_ENABLED(GENERATE_ACPI_TABLE) + if (fdt) { + log_warning("WARNING: Can't have ACPI table and device tree - ignoring DT.\n"); + return EFI_SUCCESS; + } +#else + struct bootm_headers img = { 0 }; + efi_status_t ret; + + if (fdt == EFI_FDT_USE_INTERNAL) { + const char *fdt_opt; + uintptr_t fdt_addr; + + /* Look for device tree that is already installed */ + if (get_config_table(&efi_guid_fdt)) + return EFI_SUCCESS; + /* Check if there is a hardware device tree */ + fdt_opt = env_get("fdt_addr"); + /* Use our own device tree as fallback */ + if (!fdt_opt) { + fdt_opt = env_get("fdtcontroladdr"); + if (!fdt_opt) { + log_err("ERROR: need device tree\n"); + return EFI_NOT_FOUND; + } + } + fdt_addr = hextoul(fdt_opt, NULL); + if (!fdt_addr) { + log_err("ERROR: invalid $fdt_addr or $fdtcontroladdr\n"); + return EFI_LOAD_ERROR; + } + fdt = map_sysmem(fdt_addr, 0); + } + + /* Install device tree */ + if (fdt_check_header(fdt)) { + log_err("ERROR: invalid device tree\n"); + return EFI_LOAD_ERROR; + } + + /* Prepare device tree for payload */ + ret = copy_fdt(&fdt); + if (ret) { + log_err("ERROR: out of memory\n"); + return EFI_OUT_OF_RESOURCES; + } + + if (image_setup_libfdt(&img, fdt, 0, NULL)) { + log_err("ERROR: failed to process device tree\n"); + return EFI_LOAD_ERROR; + } + + /* Create memory reservations as indicated by the device tree */ + efi_carve_out_dt_rsv(fdt); + + efi_try_purge_kaslr_seed(fdt); + + if (CONFIG_IS_ENABLED(EFI_TCG2_PROTOCOL_MEASURE_DTB)) { + ret = efi_tcg2_measure_dtb(fdt); + if (ret == EFI_SECURITY_VIOLATION) { + log_err("ERROR: failed to measure DTB\n"); + return ret; + } + } + + /* Install device tree as UEFI table */ + ret = efi_install_configuration_table(&efi_guid_fdt, fdt); + if (ret != EFI_SUCCESS) { + log_err("ERROR: failed to install device tree\n"); + return ret; + } +#endif /* GENERATE_ACPI_TABLE */ + + return EFI_SUCCESS; +} + +/** + * do_bootefi_exec() - execute EFI binary + * + * The image indicated by @handle is started. When it returns the allocated + * memory for the @load_options is freed. + * + * @handle: handle of loaded image + * @load_options: load options + * Return: status code + * + * Load the EFI binary into a newly assigned memory unwinding the relocation + * information, install the loaded image protocol, and call the binary. + */ +efi_status_t do_bootefi_exec(efi_handle_t handle, void *load_options) +{ + efi_status_t ret; + efi_uintn_t exit_data_size = 0; + u16 *exit_data = NULL; + + /* On ARM switch from EL3 or secure mode to EL2 or non-secure mode */ + switch_to_non_secure_mode(); + + /* + * The UEFI standard requires that the watchdog timer is set to five + * minutes when invoking an EFI boot option. + * + * Unified Extensible Firmware Interface (UEFI), version 2.7 Errata A + * 7.5. Miscellaneous Boot Services - EFI_BOOT_SERVICES.SetWatchdogTimer + */ + ret = efi_set_watchdog(300); + if (ret != EFI_SUCCESS) { + log_err("ERROR: Failed to set watchdog timer\n"); + goto out; + } + + /* Call our payload! */ + ret = EFI_CALL(efi_start_image(handle, &exit_data_size, &exit_data)); + if (ret != EFI_SUCCESS) { + log_err("## Application failed, r = %lu\n", + ret & ~EFI_ERROR_MASK); + if (exit_data) { + log_err("## %ls\n", exit_data); + efi_free_pool(exit_data); + } + } + + efi_restore_gd(); + +out: + free(load_options); + + if (IS_ENABLED(CONFIG_EFI_LOAD_FILE2_INITRD)) { + if (efi_initrd_deregister() != EFI_SUCCESS) + log_err("Failed to remove loadfile2 for initrd\n"); + } + + /* Control is returned to U-Boot, disable EFI watchdog */ + efi_set_watchdog(0); + + return ret; +} + +#if CONFIG_IS_ENABLED(EFI_BINARY_EXEC) +static struct efi_device_path *bootefi_image_path; +static struct efi_device_path *bootefi_device_path; +static void *image_addr; +static size_t image_size; + +/** + * efi_get_image_parameters() - return image parameters + * + * @img_addr: address of loaded image in memory + * @img_size: size of loaded image + */ +void efi_get_image_parameters(void **img_addr, size_t *img_size) +{ + *img_addr = image_addr; + *img_size = image_size; +} + +/** + * efi_clear_bootdev() - clear boot device + */ +void efi_clear_bootdev(void) +{ + efi_free_pool(bootefi_device_path); + efi_free_pool(bootefi_image_path); + bootefi_device_path = NULL; + bootefi_image_path = NULL; + image_addr = NULL; + image_size = 0; +} + +/** + * efi_set_bootdev() - set boot device + * + * This function is called when a file is loaded, e.g. via the 'load' command. + * We use the path to this file to inform the UEFI binary about the boot device. + * + * @dev: device, e.g. "MMC" + * @devnr: number of the device, e.g. "1:2" + * @path: path to file loaded + * @buffer: buffer with file loaded + * @buffer_size: size of file loaded + */ +void efi_set_bootdev(const char *dev, const char *devnr, const char *path, + void *buffer, size_t buffer_size) +{ + struct efi_device_path *device, *image; + efi_status_t ret; + + log_debug("dev=%s, devnr=%s, path=%s, buffer=%p, size=%zx\n", dev, + devnr, path, buffer, buffer_size); + + /* Forget overwritten image */ + if (buffer + buffer_size >= image_addr && + image_addr + image_size >= buffer) + efi_clear_bootdev(); + + /* Remember only PE-COFF and FIT images */ + if (efi_check_pe(buffer, buffer_size, NULL) != EFI_SUCCESS) { + if (IS_ENABLED(CONFIG_FIT) && + !fit_check_format(buffer, IMAGE_SIZE_INVAL)) { + /* + * FIT images of type EFI_OS are started via command + * bootm. We should not use their boot device with the + * bootefi command. + */ + buffer = 0; + buffer_size = 0; + } else { + log_debug("- not remembering image\n"); + return; + } + } + + /* efi_set_bootdev() is typically called repeatedly, recover memory */ + efi_clear_bootdev(); + + image_addr = buffer; + image_size = buffer_size; + + ret = efi_dp_from_name(dev, devnr, path, &device, &image); + if (ret == EFI_SUCCESS) { + bootefi_device_path = device; + if (image) { + /* FIXME: image should not contain device */ + struct efi_device_path *image_tmp = image; + + efi_dp_split_file_path(image, &device, &image); + efi_free_pool(image_tmp); + } + bootefi_image_path = image; + log_debug("- boot device %pD\n", device); + if (image) + log_debug("- image %pD\n", image); + } else { + log_debug("- efi_dp_from_name() failed, err=%lx\n", ret); + efi_clear_bootdev(); + } +} + +/** + * efi_env_set_load_options() - set load options from environment variable + * + * @handle: the image handle + * @env_var: name of the environment variable + * @load_options: pointer to load options (output) + * Return: status code + */ +efi_status_t efi_env_set_load_options(efi_handle_t handle, + const char *env_var, + u16 **load_options) +{ + const char *env = env_get(env_var); + size_t size; + u16 *pos; + efi_status_t ret; + + *load_options = NULL; + if (!env) + return EFI_SUCCESS; + size = sizeof(u16) * (utf8_utf16_strlen(env) + 1); + pos = calloc(size, 1); + if (!pos) + return EFI_OUT_OF_RESOURCES; + *load_options = pos; + utf8_utf16_strcpy(&pos, env); + ret = efi_set_load_options(handle, size, *load_options); + if (ret != EFI_SUCCESS) { + free(*load_options); + *load_options = NULL; + } + return ret; +} + +/** + * efi_run_image() - run loaded UEFI image + * + * @source_buffer: memory address of the UEFI image + * @source_size: size of the UEFI image + * Return: status code + */ +static efi_status_t efi_run_image(void *source_buffer, efi_uintn_t source_size) +{ + efi_handle_t mem_handle = NULL, handle; + struct efi_device_path *file_path = NULL; + struct efi_device_path *msg_path; + efi_status_t ret, ret2; + u16 *load_options; + + if (!bootefi_device_path || !bootefi_image_path) { + log_debug("Not loaded from disk\n"); + /* + * Special case for efi payload not loaded from disk, + * such as 'bootefi hello' or for example payload + * loaded directly into memory via JTAG, etc: + */ + file_path = efi_dp_from_mem(EFI_RESERVED_MEMORY_TYPE, + (uintptr_t)source_buffer, + source_size); + /* + * Make sure that device for device_path exist + * in load_image(). Otherwise, shell and grub will fail. + */ + ret = efi_install_multiple_protocol_interfaces(&mem_handle, + &efi_guid_device_path, + file_path, NULL); + if (ret != EFI_SUCCESS) + goto out; + msg_path = file_path; + } else { + file_path = efi_dp_append(bootefi_device_path, + bootefi_image_path); + msg_path = bootefi_image_path; + log_debug("Loaded from disk\n"); + } + + log_info("Booting %pD\n", msg_path); + + ret = EFI_CALL(efi_load_image(false, efi_root, file_path, source_buffer, + source_size, &handle)); + if (ret != EFI_SUCCESS) { + log_err("Loading image failed\n"); + goto out; + } + + /* Transfer environment variable as load options */ + ret = efi_env_set_load_options(handle, "bootargs", &load_options); + if (ret != EFI_SUCCESS) + goto out; + + ret = do_bootefi_exec(handle, load_options); + +out: + ret2 = efi_uninstall_multiple_protocol_interfaces(mem_handle, + &efi_guid_device_path, + file_path, NULL); + efi_free_pool(file_path); + return (ret != EFI_SUCCESS) ? ret : ret2; +} + +/** + * efi_binary_run() - run loaded UEFI image + * + * @image: memory address of the UEFI image + * @size: size of the UEFI image + * + * Execute an EFI binary image loaded at @image. + * @size may be zero if the binary is loaded with U-Boot load command. + * + * Return: status code + */ +efi_status_t efi_binary_run(void *image, size_t size, void *fdt) +{ + efi_status_t ret; + + /* Initialize EFI drivers */ + ret = efi_init_obj_list(); + if (ret != EFI_SUCCESS) { + log_err("Error: Cannot initialize UEFI sub-system, r = %lu\n", + ret & ~EFI_ERROR_MASK); + return ret; + } + + ret = efi_install_fdt(fdt); + if (ret != EFI_SUCCESS) + return ret; + + return efi_run_image(image, size); +} +#endif /* CONFIG_EFI_BINARY_EXEC */