@@ -5,16 +5,24 @@
* Rui Miguel Silva <rui.silva@linaro.org>
*/
+#include <blk.h>
#include <common.h>
#include <cpu_func.h>
#include <dm.h>
#include <env.h>
-#include <env.h>
#include <netdev.h>
+#include <nvmxip.h>
+#include <part.h>
#include <dm/platform_data/serial_pl01x.h>
#include <asm/armv8/mmu.h>
#include <asm/global_data.h>
+#define CORSTONE1000_KERNEL_PARTS 2
+#define CORSTONE1000_KERNEL_PRIMARY "kernel_primary"
+#define CORSTONE1000_KERNEL_SECONDARY "kernel_secondary"
+
+static int corstone1000_boot_idx;
+
static struct mm_region corstone1000_mem_map[] = {
{
/* CVM */
@@ -103,6 +111,52 @@ void fwu_plat_get_bootidx(uint *boot_idx)
*boot_idx = CONFIG_FWU_NUM_BANKS;
log_err("corstone1000: failed to read active index\n");
}
+}
+
+int board_late_init(void)
+{
+ struct disk_partition part_info;
+ struct udevice *dev, *bdev;
+ struct nvmxip_plat *plat;
+ struct blk_desc *desc;
+ int ret;
+
+ ret = uclass_first_device_err(UCLASS_NVMXIP, &dev);
+ if (ret < 0) {
+ log_err("Cannot find kernel device\n");
+ return ret;
+ }
+
+ plat = dev_get_plat(dev);
+ device_find_first_child(dev, &bdev);
+ desc = dev_get_uclass_plat(bdev);
+ ret = fwu_get_active_index(&corstone1000_boot_idx);
+ if (ret < 0) {
+ log_err("corstone1000: failed to read boot index\n");
+ return ret;
+ }
+
+ if (!corstone1000_boot_idx)
+ ret = part_get_info_by_name(desc, CORSTONE1000_KERNEL_PRIMARY,
+ &part_info);
+ else
+ ret = part_get_info_by_name(desc, CORSTONE1000_KERNEL_SECONDARY,
+ &part_info);
+
+ if (ret < 0) {
+ log_err("failed to fetch kernel partition index: %d\n",
+ corstone1000_boot_idx);
+ return ret;
+ }
+
+ ret = 0;
+
+ ret |= env_set_hex("kernel_addr", plat->phys_base +
+ (part_info.start * part_info.blksz));
+ ret |= env_set_hex("kernel_size", part_info.size * part_info.blksz);
+
+ if (ret < 0)
+ log_err("failed to setup kernel addr and size\n");
return ret;
}
@@ -20,6 +20,7 @@ CONFIG_CONSOLE_RECORD=y
CONFIG_LOGLEVEL=7
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_BOARD_LATE_INIT=y
CONFIG_SYS_MAXARGS=64
CONFIG_SYS_CBSIZE=512
# CONFIG_CMD_CONSOLE is not set
We need to distinguish between boot banks and from which partition to load the kernel+initramfs to memory. For that, fetch the boot index, fetch the correspondent partition, calculate the correct kernel address and then set the env variable kernel_addr with that value. Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> --- board/armltd/corstone1000/corstone1000.c | 56 +++++++++++++++++++++++- configs/corstone1000_defconfig | 1 + 2 files changed, 56 insertions(+), 1 deletion(-)