new file mode 100644
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#define LOG_CATEGORY UCLASS_FWU_MDATA
+
+#include <common.h>
+#include <dm.h>
+#include <efi_loader.h>
+#include <fwu.h>
+#include <fwu_mdata.h>
+#include <log.h>
+
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <u-boot/crc.h>
+
+/**
+ * fwu_get_mdata_part_num() - Get the FWU metadata partition numbers
+ * @dev: FWU metadata device
+ * @mdata_parts: array for storing the metadata partition numbers
+ *
+ * Get the partition numbers on the storage device on which the
+ * FWU metadata is stored. Two partition numbers will be returned.
+ *
+ * Return: 0 if OK, -ve on error
+ *
+ */
+int fwu_get_mdata_part_num(struct udevice *dev, uint *mdata_parts)
+{
+ const struct fwu_mdata_ops *ops = device_get_ops(dev);
+
+ if (!ops->get_mdata_part_num) {
+ log_debug("get_mdata_part_num() method not defined\n");
+ return -ENOSYS;
+ }
+
+ return ops->get_mdata_part_num(dev, mdata_parts);
+}
+
+/**
+ * fwu_read_mdata_partition() - Read the FWU metadata from a partition
+ * @dev: FWU metadata device
+ * @mdata: Copy of the FWU metadata
+ * @part_num: Partition number from which FWU metadata is to be read
+ *
+ * Read the FWU metadata from the specified partition number
+ *
+ * Return: 0 if OK, -ve on error
+ *
+ */
+int fwu_read_mdata_partition(struct udevice *dev, struct fwu_mdata *mdata,
+ uint part_num)
+{
+ const struct fwu_mdata_ops *ops = device_get_ops(dev);
+
+ if (!ops->read_mdata_partition) {
+ log_debug("read_mdata_partition() method not defined\n");
+ return -ENOSYS;
+ }
+
+ return ops->read_mdata_partition(dev, mdata, part_num);
+}
+
+/**
+ * fwu_write_mdata_partition() - Write the FWU metadata to a partition
+ * @dev: FWU metadata device
+ * @mdata: Copy of the FWU metadata
+ * @part_num: Partition number to which FWU metadata is to be written
+ *
+ * Write the FWU metadata to the specified partition number
+ *
+ * Return: 0 if OK, -ve on error
+ *
+ */
+int fwu_write_mdata_partition(struct udevice *dev, struct fwu_mdata *mdata,
+ uint part_num)
+{
+ const struct fwu_mdata_ops *ops = device_get_ops(dev);
+
+ if (!ops->write_mdata_partition) {
+ log_debug("write_mdata_partition() method not defined\n");
+ return -ENOSYS;
+ }
+
+ return ops->write_mdata_partition(dev, mdata, part_num);
+}
+
+/**
+ * fwu_mdata_check() - Check if the FWU metadata is valid
+ * @dev: FWU metadata device
+ *
+ * Validate both copies of the FWU metadata. If one of the copies
+ * has gone bad, restore it from the other copy.
+ *
+ * Return: 0 if OK, -ve on error
+ *
+ */
+int fwu_mdata_check(struct udevice *dev)
+{
+ const struct fwu_mdata_ops *ops = device_get_ops(dev);
+
+ if (!ops->check_mdata) {
+ log_debug("check_mdata() method not defined\n");
+ return -ENOSYS;
+ }
+
+ return ops->check_mdata(dev);
+}
+
+/**
+ * fwu_get_mdata() - Get a FWU metadata copy
+ * @dev: FWU metadata device
+ * @mdata: Copy of the FWU metadata
+ *
+ * Get a valid copy of the FWU metadata.
+ *
+ * Note: This function is to be called first when modifying any fields
+ * in the metadata. The sequence of calls to modify any field in the
+ * metadata would be 1) fwu_get_mdata 2) Modify metadata, followed by
+ * 3) fwu_update_mdata
+ *
+ * Return: 0 if OK, -ve on error
+ *
+ */
+int fwu_get_mdata(struct udevice *dev, struct fwu_mdata *mdata)
+{
+ const struct fwu_mdata_ops *ops = device_get_ops(dev);
+
+ if (!ops->get_mdata) {
+ log_debug("get_mdata() method not defined\n");
+ return -ENOSYS;
+ }
+
+ return ops->get_mdata(dev, mdata);
+}
+
+/**
+ * fwu_update_mdata() - Update the FWU metadata
+ * @dev: FWU metadata device
+ * @mdata: Copy of the FWU metadata
+ *
+ * Update the FWU metadata structure by writing to the
+ * FWU metadata partitions.
+ *
+ * Note: This function is not to be called directly to update the
+ * metadata fields. The sequence of function calls should be
+ * 1) fwu_get_mdata() 2) Modify the medata fields 3) fwu_update_mdata()
+ *
+ * The sequence of updating the partitions should be, update the
+ * primary metadata partition (first partition encountered), followed
+ * by updating the secondary partition. With this update sequence, in
+ * the rare scenario that the two metadata partitions are valid but do
+ * not match, maybe due to power outage at the time of updating the
+ * metadata copies, the secondary partition can be updated from the
+ * primary.
+ *
+ * Return: 0 if OK, -ve on error
+ *
+ */
+int fwu_update_mdata(struct udevice *dev, struct fwu_mdata *mdata)
+{
+ void *buf;
+ const struct fwu_mdata_ops *ops = device_get_ops(dev);
+
+ if (!ops->update_mdata) {
+ log_debug("get_mdata() method not defined\n");
+ return -ENOSYS;
+ }
+
+ /*
+ * Calculate the crc32 for the updated FWU metadata
+ * and put the updated value in the FWU metadata crc32
+ * field
+ */
+ buf = &mdata->version;
+ mdata->crc32 = crc32(0, buf, sizeof(*mdata) - sizeof(u32));
+
+ return ops->update_mdata(dev, mdata);
+}
+
+UCLASS_DRIVER(fwu_mdata) = {
+ .id = UCLASS_FWU_MDATA,
+ .name = "fwu-mdata",
+};
@@ -59,6 +59,7 @@ enum uclass_id {
UCLASS_FPGA, /* FPGA device */
UCLASS_FUZZING_ENGINE, /* Fuzzing engine */
UCLASS_FS_FIRMWARE_LOADER, /* Generic loader */
+ UCLASS_FWU_MDATA, /* FWU Metadata Access */
UCLASS_GPIO, /* Bank of general-purpose I/O pins */
UCLASS_HASH, /* Hash device */
UCLASS_HWSPINLOCK, /* Hardware semaphores */
new file mode 100644
@@ -0,0 +1,311 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#if !defined _FWU_H_
+#define _FWU_H_
+
+#include <blk.h>
+#include <efi.h>
+
+#include <linux/types.h>
+
+struct fwu_mdata;
+struct udevice;
+
+/**
+ * @mdata_check: check the validity of the FWU metadata partitions
+ * @get_mdata() - Get a FWU metadata copy
+ * @update_mdata() - Update the FWU metadata copy
+ */
+struct fwu_mdata_ops {
+ /**
+ * check_mdata() - Check if the FWU metadata is valid
+ * @dev: FWU device
+ *
+ * Validate both copies of the FWU metadata. If one of the copies
+ * has gone bad, restore it from the other copy.
+ *
+ * Return: 0 if OK, -ve on error
+ */
+ int (*check_mdata)(struct udevice *dev);
+
+ /**
+ * get_mdata() - Get a FWU metadata copy
+ * @dev: FWU device
+ * @mdata: Pointer to FWU metadata
+ *
+ * Get a valid copy of the FWU metadata.
+ *
+ * Return: 0 if OK, -ve on error
+ */
+ int (*get_mdata)(struct udevice *dev, struct fwu_mdata *mdata);
+
+ /**
+ * update_mdata() - Update the FWU metadata
+ * @dev: FWU device
+ * @mdata: Copy of the FWU metadata
+ *
+ * Update the FWU metadata structure by writing to the
+ * FWU metadata partitions.
+ *
+ * Return: 0 if OK, -ve on error
+ */
+ int (*update_mdata)(struct udevice *dev, struct fwu_mdata *mdata);
+
+ /**
+ * get_mdata_part_num() - Get the FWU metadata partition numbers
+ * @dev: FWU metadata device
+ * @mdata_parts: array for storing the metadata partition numbers
+ *
+ * Get the partition numbers on the storage device on which the
+ * FWU metadata is stored. Two partition numbers will be returned.
+ *
+ * Return: 0 if OK, -ve on error
+ */
+ int (*get_mdata_part_num)(struct udevice *dev, uint *mdata_parts);
+
+ /**
+ * read_mdata_partition() - Read the FWU metadata from a partition
+ * @dev: FWU metadata device
+ * @mdata: Copy of the FWU metadata
+ * @part_num: Partition number from which FWU metadata is to be read
+ *
+ * Read the FWU metadata from the specified partition number
+ *
+ * Return: 0 if OK, -ve on error
+ */
+ int (*read_mdata_partition)(struct udevice *dev,
+ struct fwu_mdata *mdata, uint part_num);
+
+ /**
+ * write_mdata_partition() - Write the FWU metadata to a partition
+ * @dev: FWU metadata device
+ * @mdata: Copy of the FWU metadata
+ * @part_num: Partition number to which FWU metadata is to be written
+ *
+ * Write the FWU metadata to the specified partition number
+ *
+ * Return: 0 if OK, -ve on error
+ */
+ int (*write_mdata_partition)(struct udevice *dev,
+ struct fwu_mdata *mdata, uint part_num);
+};
+
+#define FWU_MDATA_VERSION 0x1
+
+/*
+* GUID value defined in the FWU specification for identification
+* of the FWU metadata partition.
+*/
+#define FWU_MDATA_GUID \
+ EFI_GUID(0x8a7a84a0, 0x8387, 0x40f6, 0xab, 0x41, \
+ 0xa8, 0xb9, 0xa5, 0xa6, 0x0d, 0x23)
+
+/**
+ * fwu_check_mdata_validity() - Check for validity of the FWU metadata copies
+ *
+ * Read both the metadata copies from the storage media, verify their
+ * checksum, and ascertain that both copies match. If one of the copies
+ * has gone bad, restore it from the good copy.
+ *
+ * Return: 0 if OK, -ve on error
+ *
+ */
+int fwu_check_mdata_validity(void);
+
+/**
+ * fwu_get_mdata_part_num() - Get the FWU metadata partition numbers
+ * @dev: FWU metadata device
+ * @mdata_parts: array for storing the metadata partition numbers
+ *
+ * Get the partition numbers on the storage device on which the
+ * FWU metadata is stored. Two partition numbers will be returned
+ * through the array.
+ *
+ * Return: 0 if OK, -ve on error
+ *
+ */
+int fwu_get_mdata_part_num(struct udevice *dev, uint *mdata_parts);
+
+/**
+ * fwu_read_mdata_partition() - Read the FWU metadata from a partition
+ * @dev: FWU metadata device
+ * @mdata: Copy of the FWU metadata
+ * @part_num: Partition number from which FWU metadata is to be read
+ *
+ * Read the FWU metadata from the specified partition number
+ *
+ * Return: 0 if OK, -ve on error
+ *
+ */
+int fwu_read_mdata_partition(struct udevice *dev, struct fwu_mdata *mdata,
+ uint part_num);
+
+/**
+ * fwu_write_mdata_partition() - Write the FWU metadata to a partition
+ * @dev: FWU metadata device
+ * @mdata: Copy of the FWU metadata
+ * @part_num: Partition number to which FWU metadata is to be written
+ *
+ * Write the FWU metadata to the specified partition number
+ *
+ * Return: 0 if OK, -ve on error
+ *
+ */
+int fwu_write_mdata_partition(struct udevice *dev, struct fwu_mdata *mdata,
+ uint part_num);
+
+/**
+ * fwu_get_mdata() - Get a FWU metadata copy
+ * @dev: FWU metadata device
+ * @mdata: Copy of the FWU metadata
+ *
+ * Get a valid copy of the FWU metadata.
+ *
+ * Note: This function is to be called first when modifying any fields
+ * in the metadata. The sequence of calls to modify any field in the
+ * metadata would be 1) fwu_get_mdata 2) Modify metadata, followed by
+ * 3) fwu_update_mdata
+ *
+ * Return: 0 if OK, -ve on error
+ *
+ */
+int fwu_get_mdata(struct udevice *dev, struct fwu_mdata *mdata);
+
+/**
+ * fwu_update_mdata() - Update the FWU metadata
+ * @dev: FWU metadata device
+ * @mdata: Copy of the FWU metadata
+ *
+ * Update the FWU metadata structure by writing to the
+ * FWU metadata partitions.
+ *
+ * Note: This function is not to be called directly to update the
+ * metadata fields. The sequence of function calls should be
+ * 1) fwu_get_mdata() 2) Modify the medata fields 3) fwu_update_mdata()
+ *
+ * The sequence of updating the partitions should be, update the
+ * primary metadata partition (first partition encountered), followed
+ * by updating the secondary partition. With this update sequence, in
+ * the rare scenario that the two metadata partitions are valid but do
+ * not match, maybe due to power outage at the time of updating the
+ * metadata copies, the secondary partition can be updated from the
+ * primary.
+ *
+ * Return: 0 if OK, -ve on error
+ *
+ */
+int fwu_update_mdata(struct udevice *dev, struct fwu_mdata *mdata);
+
+/**
+ * fwu_get_active_index() - Get active_index from the FWU metadata
+ * @active_idxp: active_index value to be read
+ *
+ * Read the active_index field from the FWU metadata and place it in
+ * the variable pointed to be the function argument.
+ *
+ * Return: 0 if OK, -ve on error
+ *
+ */
+int fwu_get_active_index(uint *active_idxp);
+
+/**
+ * fwu_set_active_index() - Set active_index in the FWU metadata
+ * @active_idx: active_index value to be set
+ *
+ * Update the active_index field in the FWU metadata
+ *
+ * Return: 0 if OK, -ve on error
+ *
+ */
+int fwu_set_active_index(uint active_idx);
+
+/**
+ * fwu_get_image_index() - Get the Image Index to be used for capsule update
+ * @image_index: The Image Index for the image
+ *
+ * The FWU multi bank update feature computes the value of image_index at
+ * runtime, based on the bank to which the image needs to be written to.
+ * Derive the image_index value for the image.
+ *
+ * Currently, the capsule update driver uses the DFU framework for
+ * the updates. This function gets the DFU alt number which is to
+ * be used as the Image Index
+ *
+ * Return: 0 if OK, -ve on error
+ *
+ */
+int fwu_get_image_index(u8 *image_index);
+
+/**
+ * fwu_mdata_check() - Check if the FWU metadata is valid
+ * @dev: FWU metadata device
+ *
+ * Validate both copies of the FWU metadata. If one of the copies
+ * has gone bad, restore it from the other copy.
+ *
+ * Return: 0 if OK, -ve on error
+ *
+ */
+int fwu_mdata_check(struct udevice *dev);
+
+/**
+ * fwu_revert_boot_index() - Revert the active index in the FWU metadata
+ *
+ * Revert the active_index value in the FWU metadata, by swapping the values
+ * of active_index and previous_active_index in both copies of the
+ * FWU metadata.
+ *
+ * Return: 0 if OK, -ve on error
+ *
+ */
+int fwu_revert_boot_index(void);
+
+/**
+ * fwu_verify_mdata() - Verify the FWU metadata
+ * @mdata: FWU metadata structure
+ * @pri_part: FWU metadata partition is primary or secondary
+ *
+ * Verify the FWU metadata by computing the CRC32 for the metadata
+ * structure and comparing it against the CRC32 value stored as part
+ * of the structure.
+ *
+ * Return: 0 if OK, -ve on error
+ *
+ */
+int fwu_verify_mdata(struct fwu_mdata *mdata, bool pri_part);
+
+/**
+ * fwu_accept_image() - Set the Acceptance bit for the image
+ * @img_type_id: GUID of the image type for which the accepted bit is to be
+ * cleared
+ * @bank: Bank of which the image's Accept bit is to be set
+ *
+ * Set the accepted bit for the image specified by the img_guid parameter. This
+ * indicates acceptance of image for subsequent boots by some governing component
+ * like OS(or firmware).
+ *
+ * Return: 0 if OK, -ve on error
+ *
+ */
+int fwu_accept_image(efi_guid_t *img_type_id, u32 bank);
+
+/**
+ * fwu_clear_accept_image() - Clear the Acceptance bit for the image
+ * @img_type_id: GUID of the image type for which the accepted bit is to be
+ * cleared
+ * @bank: Bank of which the image's Accept bit is to be cleared
+ *
+ * Clear the accepted bit for the image type specified by the img_type_id parameter.
+ * This function is called after the image has been updated. The accepted bit is
+ * cleared to be set subsequently after passing the image acceptance criteria, by
+ * either the OS(or firmware)
+ *
+ * Return: 0 if OK, -ve on error
+ *
+ */
+int fwu_clear_accept_image(efi_guid_t *img_type_id, u32 bank);
+
+#endif /* _FWU_H_ */
new file mode 100644
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#if !defined _FWU_MDATA_H_
+#define _FWU_MDATA_H_
+
+#include <efi.h>
+
+/**
+ * struct fwu_image_bank_info - firmware image information
+ * @image_uuid: Guid value of the image in this bank
+ * @accepted: Acceptance status of the image
+ * @reserved: Reserved
+ *
+ * The structure contains image specific fields which are
+ * used to identify the image and to specify the image's
+ * acceptance status
+ */
+struct fwu_image_bank_info {
+ efi_guid_t image_uuid;
+ uint32_t accepted;
+ uint32_t reserved;
+};
+
+/**
+ * struct fwu_image_entry - information for a particular type of image
+ * @image_type_uuid: Guid value for identifying the image type
+ * @location_uuid: Guid of the storage volume where the image is located
+ * @img_bank_info: Array containing properties of images
+ *
+ * This structure contains information on various types of updatable
+ * firmware images. Each image type then contains an array of image
+ * information per bank.
+ */
+struct fwu_image_entry {
+ efi_guid_t image_type_uuid;
+ efi_guid_t location_uuid;
+ struct fwu_image_bank_info img_bank_info[CONFIG_FWU_NUM_BANKS];
+};
+
+/**
+ * struct fwu_mdata - FWU metadata structure for multi-bank updates
+ * @crc32: crc32 value for the FWU metadata
+ * @version: FWU metadata version
+ * @active_index: Index of the bank currently used for booting images
+ * @previous_active_inde: Index of the bank used before the current bank
+ * being used for booting
+ * @img_entry: Array of information on various firmware images that can
+ * be updated
+ *
+ * This structure is used to store all the needed information for performing
+ * multi bank updates on the platform. This contains info on the bank being
+ * used to boot along with the information needed for identification of
+ * individual images
+ */
+struct fwu_mdata {
+ uint32_t crc32;
+ uint32_t version;
+ uint32_t active_index;
+ uint32_t previous_active_index;
+
+ struct fwu_image_entry img_entry[CONFIG_FWU_NUM_IMAGES_PER_BANK];
+};
+
+#endif /* _FWU_MDATA_H_ */
new file mode 100644
@@ -0,0 +1,474 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <dm.h>
+#include <efi_loader.h>
+#include <fwu.h>
+#include <fwu_mdata.h>
+#include <log.h>
+
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <u-boot/crc.h>
+
+enum {
+ IMAGE_ACCEPT_SET = 1,
+ IMAGE_ACCEPT_CLEAR,
+};
+
+enum {
+ PRIMARY_PART = 1,
+ SECONDARY_PART,
+ BOTH_PARTS,
+};
+
+static int fwu_get_dev_mdata(struct udevice **dev, struct fwu_mdata *mdata)
+{
+ int ret;
+
+ ret = uclass_first_device_err(UCLASS_FWU_MDATA, dev);
+ if (ret) {
+ log_debug("Cannot find fwu device\n");
+ return ret;
+ }
+
+ if (!mdata)
+ return 0;
+
+ ret = fwu_get_mdata(*dev, mdata);
+ if (ret < 0)
+ log_debug("Unable to get valid FWU metadata\n");
+
+ return ret;
+}
+
+static int fwu_get_image_type_id(u8 *image_index, efi_guid_t *image_type_id)
+{
+ u8 index;
+ int i;
+ struct efi_fw_image *image;
+
+ index = *image_index;
+ image = update_info.images;
+ for (i = 0; i < num_image_type_guids; i++) {
+ if (index == image[i].image_index) {
+ guidcpy(image_type_id, &image[i].image_type_id);
+ return 0;
+ }
+ }
+
+ return -ENOENT;
+}
+
+/**
+ * fwu_verify_mdata() - Verify the FWU metadata
+ * @mdata: FWU metadata structure
+ * @pri_part: FWU metadata partition is primary or secondary
+ *
+ * Verify the FWU metadata by computing the CRC32 for the metadata
+ * structure and comparing it against the CRC32 value stored as part
+ * of the structure.
+ *
+ * Return: 0 if OK, -ve on error
+ *
+ */
+int fwu_verify_mdata(struct fwu_mdata *mdata, bool pri_part)
+{
+ u32 calc_crc32;
+ void *buf;
+
+ buf = &mdata->version;
+ calc_crc32 = crc32(0, buf, sizeof(*mdata) - sizeof(u32));
+
+ if (calc_crc32 != mdata->crc32) {
+ log_debug("crc32 check failed for %s FWU metadata partition\n",
+ pri_part ? "primary" : "secondary");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/**
+ * fwu_check_mdata_validity() - Check for validity of the FWU metadata copies
+ *
+ * Read both the metadata copies from the storage media, verify their checksum,
+ * and ascertain that both copies match. If one of the copies has gone bad,
+ * restore it from the good copy.
+ *
+ * Return: 0 if OK, -ve on error
+ *
+ */
+int fwu_check_mdata_validity(void)
+{
+ int ret;
+ struct udevice *dev;
+ struct fwu_mdata pri_mdata;
+ struct fwu_mdata secondary_mdata;
+ uint mdata_parts[2];
+ uint valid_partitions, invalid_partitions;
+
+ ret = fwu_get_dev_mdata(&dev, NULL);
+ if (ret)
+ return ret;
+
+ /*
+ * Check if the platform has defined its own
+ * function to check the metadata partitions'
+ * validity. If so, that takes precedence.
+ */
+ ret = fwu_mdata_check(dev);
+ if (!ret || ret != -ENOSYS)
+ return ret;
+
+ /*
+ * Two FWU metadata partitions are expected.
+ * If we don't have two, user needs to create
+ * them first
+ */
+ valid_partitions = 0;
+ ret = fwu_get_mdata_part_num(dev, mdata_parts);
+ if (ret < 0) {
+ log_debug("Error getting the FWU metadata partitions\n");
+ return -ENOENT;
+ }
+
+ ret = fwu_read_mdata_partition(dev, &pri_mdata, mdata_parts[0]);
+ if (!ret) {
+ ret = fwu_verify_mdata(&pri_mdata, 1);
+ if (!ret)
+ valid_partitions |= PRIMARY_PART;
+ }
+
+ ret = fwu_read_mdata_partition(dev, &secondary_mdata, mdata_parts[1]);
+ if (!ret) {
+ ret = fwu_verify_mdata(&secondary_mdata, 0);
+ if (!ret)
+ valid_partitions |= SECONDARY_PART;
+ }
+
+ if (valid_partitions == (PRIMARY_PART | SECONDARY_PART)) {
+ /*
+ * Before returning, check that both the
+ * FWU metadata copies are the same. If not,
+ * populate the secondary partition from the
+ * primary partition copy.
+ */
+ if (!memcmp(&pri_mdata, &secondary_mdata,
+ sizeof(struct fwu_mdata))) {
+ ret = 0;
+ } else {
+ log_info("Both FWU metadata copies are valid but do not match.");
+ log_info(" Restoring the secondary partition from the primary\n");
+ ret = fwu_write_mdata_partition(dev, &pri_mdata,
+ mdata_parts[1]);
+ if (ret)
+ log_debug("Restoring secondary FWU metadata partition failed\n");
+ }
+ goto out;
+ }
+
+ if (!(valid_partitions & BOTH_PARTS)) {
+ log_info("Both FWU metadata partitions invalid\n");
+ ret = -EBADMSG;
+ goto out;
+ }
+
+ invalid_partitions = valid_partitions ^ BOTH_PARTS;
+ ret = fwu_write_mdata_partition(dev,
+ (invalid_partitions == PRIMARY_PART) ?
+ &secondary_mdata : &pri_mdata,
+ (invalid_partitions == PRIMARY_PART) ?
+ mdata_parts[0] : mdata_parts[1]);
+
+ if (ret)
+ log_debug("Restoring %s FWU metadata partition failed\n",
+ (invalid_partitions == PRIMARY_PART) ?
+ "primary" : "secondary");
+
+out:
+ return ret;
+}
+
+/**
+ * fwu_get_active_index() - Get active_index from the FWU metadata
+ * @active_idx: active_index value to be read
+ *
+ * Read the active_index field from the FWU metadata and place it in
+ * the variable pointed to be the function argument.
+ *
+ * Return: 0 if OK, -ve on error
+ *
+ */
+int fwu_get_active_index(uint *active_idx)
+{
+ int ret;
+ struct udevice *dev;
+ struct fwu_mdata mdata = { 0 };
+
+ ret = fwu_get_dev_mdata(&dev, &mdata);
+ if (ret)
+ return ret;
+
+ /*
+ * Found the FWU metadata partition, now read the active_index
+ * value
+ */
+ *active_idx = mdata.active_index;
+ if (*active_idx >= CONFIG_FWU_NUM_BANKS) {
+ log_debug("Active index value read is incorrect\n");
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+/**
+ * fwu_set_active_index() - Set active_index in the FWU metadata
+ * @active_idx: active_index value to be set
+ *
+ * Update the active_index field in the FWU metadata
+ *
+ * Return: 0 if OK, -ve on error
+ *
+ */
+int fwu_set_active_index(uint active_idx)
+{
+ int ret;
+ struct udevice *dev;
+ struct fwu_mdata mdata = { 0 };
+
+ if (active_idx >= CONFIG_FWU_NUM_BANKS) {
+ log_debug("Invalid active index value\n");
+ return -EINVAL;
+ }
+
+ ret = fwu_get_dev_mdata(&dev, &mdata);
+ if (ret)
+ return ret;
+
+ /*
+ * Update the active index and previous_active_index fields
+ * in the FWU metadata
+ */
+ mdata.previous_active_index = mdata.active_index;
+ mdata.active_index = active_idx;
+
+ /*
+ * Now write this updated FWU metadata to both the
+ * FWU metadata partitions
+ */
+ ret = fwu_update_mdata(dev, &mdata);
+ if (ret) {
+ log_debug("Failed to update FWU metadata partitions\n");
+ ret = -EIO;
+ }
+
+ return ret;
+}
+
+/**
+ * fwu_get_image_index() - Get the Image Index to be used for capsule update
+ * @image_index: The Image Index for the image
+ *
+ * The FWU multi bank update feature computes the value of image_index at
+ * runtime, based on the bank to which the image needs to be written to.
+ * Derive the image_index value for the image.
+ *
+ * Currently, the capsule update driver uses the DFU framework for
+ * the updates. This function gets the DFU alt number which is to
+ * be used as the Image Index
+ *
+ * Return: 0 if OK, -ve on error
+ *
+ */
+int fwu_get_image_index(u8 *image_index)
+{
+ int ret, i;
+ u8 alt_num;
+ uint update_bank;
+ efi_guid_t *image_guid, image_type_id;
+ struct udevice *dev;
+ struct fwu_mdata mdata = { 0 };
+ struct fwu_image_entry *img_entry;
+ struct fwu_image_bank_info *img_bank_info;
+
+ ret = fwu_get_dev_mdata(&dev, &mdata);
+ if (ret)
+ return ret;
+
+ ret = fwu_plat_get_update_index(&update_bank);
+ if (ret) {
+ log_debug("Failed to get the FWU update bank\n");
+ goto out;
+ }
+
+ ret = fwu_get_image_type_id(image_index, &image_type_id);
+ if (ret) {
+ log_debug("Unable to get image_type_id for image_index %u\n",
+ *image_index);
+ goto out;
+ }
+
+ ret = -EINVAL;
+ /*
+ * The FWU metadata has been read. Now get the image_uuid for the
+ * image with the update_bank.
+ */
+ for (i = 0; i < CONFIG_FWU_NUM_IMAGES_PER_BANK; i++) {
+ if (!guidcmp(&image_type_id,
+ &mdata.img_entry[i].image_type_uuid)) {
+ img_entry = &mdata.img_entry[i];
+ img_bank_info = &img_entry->img_bank_info[update_bank];
+ image_guid = &img_bank_info->image_uuid;
+ ret = fwu_plat_get_alt_num(dev, image_guid, &alt_num);
+ if (ret) {
+ log_debug("alt_num not found for partition with GUID %pUs\n",
+ image_guid);
+ } else {
+ log_debug("alt_num %d for partition %pUs\n",
+ alt_num, image_guid);
+ *image_index = alt_num + 1;
+ }
+
+ goto out;
+ }
+ }
+
+ log_debug("Partition with the image type %pUs not found\n",
+ &image_type_id);
+
+out:
+ return ret;
+}
+
+/**
+ * fwu_revert_boot_index() - Revert the active index in the FWU metadata
+ *
+ * Revert the active_index value in the FWU metadata, by swapping the values
+ * of active_index and previous_active_index in both copies of the
+ * FWU metadata.
+ *
+ * Return: 0 if OK, -ve on error
+ *
+ */
+int fwu_revert_boot_index(void)
+{
+ int ret;
+ u32 cur_active_index;
+ struct udevice *dev;
+ struct fwu_mdata mdata = { 0 };
+
+ ret = fwu_get_dev_mdata(&dev, &mdata);
+ if (ret)
+ return ret;
+
+ /*
+ * Swap the active index and previous_active_index fields
+ * in the FWU metadata
+ */
+ cur_active_index = mdata.active_index;
+ mdata.active_index = mdata.previous_active_index;
+ mdata.previous_active_index = cur_active_index;
+
+ /*
+ * Now write this updated FWU metadata to both the
+ * FWU metadata partitions
+ */
+ ret = fwu_update_mdata(dev, &mdata);
+ if (ret) {
+ log_debug("Failed to update FWU metadata partitions\n");
+ ret = -EIO;
+ }
+
+ return ret;
+}
+
+/**
+ * fwu_clrset_image_accept() - Set or Clear the Acceptance bit for the image
+ * @img_type_id: GUID of the image type for which the accepted bit is to be
+ * set or cleared
+ * @bank: Bank of which the image's Accept bit is to be set or cleared
+ * @action: Action which specifies whether image's Accept bit is to be set or
+ * cleared
+ *
+ * Set/Clear the accepted bit for the image specified by the img_guid parameter.
+ * This indicates acceptance or rejection of image for subsequent boots by some
+ * governing component like OS(or firmware).
+ *
+ * Return: 0 if OK, -ve on error
+ *
+ */
+static int fwu_clrset_image_accept(efi_guid_t *img_type_id, u32 bank, u8 action)
+{
+ int ret, i;
+ struct udevice *dev;
+ struct fwu_mdata mdata = { 0 };
+ struct fwu_image_entry *img_entry;
+ struct fwu_image_bank_info *img_bank_info;
+
+ ret = fwu_get_dev_mdata(&dev, &mdata);
+ if (ret)
+ return ret;
+
+ img_entry = &mdata.img_entry[0];
+ for (i = 0; i < CONFIG_FWU_NUM_IMAGES_PER_BANK; i++) {
+ if (!guidcmp(&img_entry[i].image_type_uuid, img_type_id)) {
+ img_bank_info = &img_entry[i].img_bank_info[bank];
+ if (action == IMAGE_ACCEPT_SET)
+ img_bank_info->accepted |= FWU_IMAGE_ACCEPTED;
+ else
+ img_bank_info->accepted = 0;
+
+ ret = fwu_update_mdata(dev, &mdata);
+ goto out;
+ }
+ }
+
+ /* Image not found */
+ ret = -ENOENT;
+
+out:
+ return ret;
+}
+
+/**
+ * fwu_accept_image() - Set the Acceptance bit for the image
+ * @img_type_id: GUID of the image type for which the accepted bit is to be
+ * cleared
+ * @bank: Bank of which the image's Accept bit is to be set
+ *
+ * Set the accepted bit for the image specified by the img_guid parameter. This
+ * indicates acceptance of image for subsequent boots by some governing component
+ * like OS(or firmware).
+ *
+ * Return: 0 if OK, -ve on error
+ *
+ */
+int fwu_accept_image(efi_guid_t *img_type_id, u32 bank)
+{
+ return fwu_clrset_image_accept(img_type_id, bank,
+ IMAGE_ACCEPT_SET);
+}
+
+/**
+ * fwu_clear_accept_image() - Clear the Acceptance bit for the image
+ * @img_type_id: GUID of the image type for which the accepted bit is to be
+ * cleared
+ * @bank: Bank of which the image's Accept bit is to be cleared
+ *
+ * Clear the accepted bit for the image type specified by the img_type_id parameter.
+ * This function is called after the image has been updated. The accepted bit is
+ * cleared to be set subsequently after passing the image acceptance criteria, by
+ * either the OS(or firmware)
+ *
+ * Return: 0 if OK, -ve on error
+ *
+ */
+int fwu_clear_accept_image(efi_guid_t *img_type_id, u32 bank)
+{
+ return fwu_clrset_image_accept(img_type_id, bank,
+ IMAGE_ACCEPT_CLEAR);
+}