new file mode 100644
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for Schneider LCES Board
+ *
+ * Based on r9a06g032-rzn1d400-db.dts
+ */
+
+/dts-v1/;
+
+#include "r9a06g032.dtsi"
+#include <dt-bindings/pinctrl/rzn1-pinctrl.h>
+
+/ {
+ model = "Schneider LCES Board";
+ compatible = "schneider,rzn1d400-lces", "renesas,r9a06g032";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ /* TODO: (RFS) only RZN1D has DDR */
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>;
+ };
+};
+
+&ddrctrl {
+ status = "okay";
+};
+&pinctrl {
+ status = "okay";
+
+ pins_uart0: pins_uart0 {
+ pinmux = <
+ RZN1_PINMUX(103, RZN1_FUNC_UART0_I) /* UART0_TXD */
+ RZN1_PINMUX(104, RZN1_FUNC_UART0_I) /* UART0_RXD */
+ >;
+ bias-disable;
+ };
+};
+&uart0 {
+ pinctrl-0 = <&pins_uart0>;
+ pinctrl-names = "default";
+ status = "okay";
+};
@@ -15,4 +15,18 @@ endchoice
config SYS_SOC
default "rzn1"
+choice
+ prompt "Board select"
+ default TARGET_SCHNEIDER_LCES
+
+config TARGET_SCHNEIDER_LCES
+ bool "Schneider LCES board"
+ help
+ Support the Schneider LCES1 and LCES2 boards, which are based
+ on the Renesas RZ/N1 SoC.
+
+endchoice
+
+source "board/schneider/lces/Kconfig"
+
endif
new file mode 100644
@@ -0,0 +1,12 @@
+if TARGET_SCHNEIDER_LCES
+
+config SYS_BOARD
+ default "lces"
+
+config SYS_VENDOR
+ default "schneider"
+
+config SYS_CONFIG_NAME
+ default "lces"
+
+endif
new file mode 100644
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+obj-y := lces.o ddr_timing.o
new file mode 100644
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <asm/types.h>
+
+#include "jedec_ddr3_2g_x16_1333h_500_cl8.h"
+
+u32 ddr_00_87_async[] = {
+ DENALI_CTL_00_DATA,
+ DENALI_CTL_01_DATA,
+ DENALI_CTL_02_DATA,
+ DENALI_CTL_03_DATA,
+ DENALI_CTL_04_DATA,
+ DENALI_CTL_05_DATA,
+ DENALI_CTL_06_DATA,
+ DENALI_CTL_07_DATA,
+ DENALI_CTL_08_DATA,
+ DENALI_CTL_09_DATA,
+
+ DENALI_CTL_10_DATA,
+ DENALI_CTL_11_DATA,
+ DENALI_CTL_12_DATA,
+ DENALI_CTL_13_DATA,
+ DENALI_CTL_14_DATA,
+ DENALI_CTL_15_DATA,
+ DENALI_CTL_16_DATA,
+ DENALI_CTL_17_DATA,
+ DENALI_CTL_18_DATA,
+ DENALI_CTL_19_DATA,
+
+ DENALI_CTL_20_DATA,
+ DENALI_CTL_21_DATA,
+ DENALI_CTL_22_DATA,
+ DENALI_CTL_23_DATA,
+ DENALI_CTL_24_DATA,
+ DENALI_CTL_25_DATA,
+ DENALI_CTL_26_DATA,
+ DENALI_CTL_27_DATA,
+ DENALI_CTL_28_DATA,
+ DENALI_CTL_29_DATA,
+
+ DENALI_CTL_30_DATA,
+ DENALI_CTL_31_DATA,
+ DENALI_CTL_32_DATA,
+ DENALI_CTL_33_DATA,
+ DENALI_CTL_34_DATA,
+ DENALI_CTL_35_DATA,
+ DENALI_CTL_36_DATA,
+ DENALI_CTL_37_DATA,
+ DENALI_CTL_38_DATA,
+ DENALI_CTL_39_DATA,
+
+ DENALI_CTL_40_DATA,
+ DENALI_CTL_41_DATA,
+ DENALI_CTL_42_DATA,
+ DENALI_CTL_43_DATA,
+ DENALI_CTL_44_DATA,
+ DENALI_CTL_45_DATA,
+ DENALI_CTL_46_DATA,
+ DENALI_CTL_47_DATA,
+ DENALI_CTL_48_DATA,
+ DENALI_CTL_49_DATA,
+
+ DENALI_CTL_50_DATA,
+ DENALI_CTL_51_DATA,
+ DENALI_CTL_52_DATA,
+ DENALI_CTL_53_DATA,
+ DENALI_CTL_54_DATA,
+ DENALI_CTL_55_DATA,
+ DENALI_CTL_56_DATA,
+ DENALI_CTL_57_DATA,
+ DENALI_CTL_58_DATA,
+ DENALI_CTL_59_DATA,
+
+ DENALI_CTL_60_DATA,
+ DENALI_CTL_61_DATA,
+ DENALI_CTL_62_DATA,
+ DENALI_CTL_63_DATA,
+ DENALI_CTL_64_DATA,
+ DENALI_CTL_65_DATA,
+ DENALI_CTL_66_DATA,
+ DENALI_CTL_67_DATA,
+ DENALI_CTL_68_DATA,
+ DENALI_CTL_69_DATA,
+
+ DENALI_CTL_70_DATA,
+ DENALI_CTL_71_DATA,
+ DENALI_CTL_72_DATA,
+ DENALI_CTL_73_DATA,
+ DENALI_CTL_74_DATA,
+ DENALI_CTL_75_DATA,
+ DENALI_CTL_76_DATA,
+ DENALI_CTL_77_DATA,
+ DENALI_CTL_78_DATA,
+ DENALI_CTL_79_DATA,
+
+ DENALI_CTL_80_DATA,
+ DENALI_CTL_81_DATA,
+ DENALI_CTL_82_DATA,
+ DENALI_CTL_83_DATA,
+ DENALI_CTL_84_DATA,
+ DENALI_CTL_85_DATA,
+ DENALI_CTL_86_DATA,
+ DENALI_CTL_87_DATA,
+ DENALI_CTL_88_DATA,
+ DENALI_CTL_89_DATA,
+
+ DENALI_CTL_90_DATA,
+ DENALI_CTL_91_DATA,
+ DENALI_CTL_92_DATA,
+};
+
+u32 ddr_350_374_async[] = {
+ DENALI_CTL_350_DATA,
+ DENALI_CTL_351_DATA,
+ DENALI_CTL_352_DATA,
+ DENALI_CTL_353_DATA,
+ DENALI_CTL_354_DATA,
+ DENALI_CTL_355_DATA,
+ DENALI_CTL_356_DATA,
+ DENALI_CTL_357_DATA,
+ DENALI_CTL_358_DATA,
+ DENALI_CTL_359_DATA,
+
+ DENALI_CTL_360_DATA,
+ DENALI_CTL_361_DATA,
+ DENALI_CTL_362_DATA,
+ DENALI_CTL_363_DATA,
+ DENALI_CTL_364_DATA,
+ DENALI_CTL_365_DATA,
+ DENALI_CTL_366_DATA,
+ DENALI_CTL_367_DATA,
+ DENALI_CTL_368_DATA,
+ DENALI_CTL_369_DATA,
+
+ DENALI_CTL_370_DATA,
+ DENALI_CTL_371_DATA,
+ DENALI_CTL_372_DATA,
+ DENALI_CTL_373_DATA,
+ DENALI_CTL_374_DATA,
+};
new file mode 100644
@@ -0,0 +1,399 @@
+
+/* ****************************************************************
+ * CADENCE Copyright (c) 2001-2011 *
+ * Cadence Design Systems, Inc. *
+ * All rights reserved. *
+ * *
+ ******************************************************************
+ * The values calculated from this script are meant to be *
+ * representative programmings. The values may not reflect the *
+ * actual required programming for production use. Please *
+ * closely review all programmed values for technical accuracy *
+ * before use in production parts. *
+ ******************************************************************
+ *
+ * Module: regconfig.h
+ * Documentation: Register programming header file
+ *
+ ******************************************************************
+ ******************************************************************
+ * WARNING: This file was automatically generated. Manual
+ * editing may result in undetermined behavior.
+ ******************************************************************
+ ******************************************************************/
+
+#define DENALI_CTL_00_DATA 0x00000600
+#define DENALI_CTL_01_DATA 0x00000000
+#define DENALI_CTL_02_DATA 0x00000000
+#define DENALI_CTL_03_DATA 0x00000000
+#define DENALI_CTL_04_DATA 0x00000000
+#define DENALI_CTL_05_DATA 0x00000000
+#define DENALI_CTL_06_DATA 0x00000000
+#define DENALI_CTL_07_DATA 0x00000005
+#define DENALI_CTL_08_DATA 0x000186a0
+#define DENALI_CTL_09_DATA 0x0003d090
+#define DENALI_CTL_10_DATA 0x00000000
+#define DENALI_CTL_11_DATA 0x10000200
+#define DENALI_CTL_12_DATA 0x04040006
+#define DENALI_CTL_13_DATA 0x04121904
+#define DENALI_CTL_14_DATA 0x04041707
+#define DENALI_CTL_15_DATA 0x00891c0c
+#define DENALI_CTL_16_DATA 0x07000503
+#define DENALI_CTL_17_DATA 0x01010008
+#define DENALI_CTL_18_DATA 0x0007030f
+#define DENALI_CTL_19_DATA 0x01000000
+#define DENALI_CTL_20_DATA 0x0f340050
+#define DENALI_CTL_21_DATA 0x00000005
+#define DENALI_CTL_22_DATA 0x000c0003
+#define DENALI_CTL_23_DATA 0x00000000
+#define DENALI_CTL_24_DATA 0x00550200
+#define DENALI_CTL_25_DATA 0x00010000
+#define DENALI_CTL_26_DATA 0x00050500
+#define DENALI_CTL_27_DATA 0x00000000
+#define DENALI_CTL_28_DATA 0x00000000
+#define DENALI_CTL_29_DATA 0x00000000
+#define DENALI_CTL_30_DATA 0x00000000
+#define DENALI_CTL_31_DATA 0x00084000
+#define DENALI_CTL_32_DATA 0x00080046
+#define DENALI_CTL_33_DATA 0x00000000
+#define DENALI_CTL_34_DATA 0x00460840
+#define DENALI_CTL_35_DATA 0x00000008
+#define DENALI_CTL_36_DATA 0x00010000
+#define DENALI_CTL_37_DATA 0x00000000
+#define DENALI_CTL_38_DATA 0x00000000
+#define DENALI_CTL_39_DATA 0x00000000
+#define DENALI_CTL_40_DATA 0x00000000
+#define DENALI_CTL_41_DATA 0x00000000
+#define DENALI_CTL_42_DATA 0x00000000
+#define DENALI_CTL_43_DATA 0x00000000
+#define DENALI_CTL_44_DATA 0x00000000
+#define DENALI_CTL_45_DATA 0x01000200
+#define DENALI_CTL_46_DATA 0x02000040
+#define DENALI_CTL_47_DATA 0x00000040
+#define DENALI_CTL_48_DATA 0x02000100
+#define DENALI_CTL_49_DATA 0xffff0a01
+#define DENALI_CTL_50_DATA 0x01010101
+#define DENALI_CTL_51_DATA 0x01010101
+#define DENALI_CTL_52_DATA 0x01030101
+#define DENALI_CTL_53_DATA 0x0c030000
+#define DENALI_CTL_54_DATA 0x00000000
+#define DENALI_CTL_55_DATA 0x00000100
+#define DENALI_CTL_56_DATA 0x00000000
+#define DENALI_CTL_57_DATA 0x00000000
+#define DENALI_CTL_58_DATA 0x00000000
+#define DENALI_CTL_59_DATA 0x00000000
+#define DENALI_CTL_60_DATA 0x00000000
+#define DENALI_CTL_61_DATA 0x00000000
+#define DENALI_CTL_62_DATA 0x01020000
+#define DENALI_CTL_63_DATA 0x06050201
+#define DENALI_CTL_64_DATA 0x02000106
+#define DENALI_CTL_65_DATA 0x00000000
+#define DENALI_CTL_66_DATA 0x02020202
+#define DENALI_CTL_67_DATA 0x00000200
+#define DENALI_CTL_68_DATA 0x00000000
+#define DENALI_CTL_69_DATA 0x00000000
+#define DENALI_CTL_70_DATA 0x00000000
+#define DENALI_CTL_71_DATA 0x00280d00
+#define DENALI_CTL_72_DATA 0x00000000
+#define DENALI_CTL_73_DATA 0x00000100
+#define DENALI_CTL_74_DATA 0x00010001
+#define DENALI_CTL_75_DATA 0x00000000
+#define DENALI_CTL_76_DATA 0x00000000
+#define DENALI_CTL_77_DATA 0x00000000
+#define DENALI_CTL_78_DATA 0x00000000
+#define DENALI_CTL_79_DATA 0x00222200
+#define DENALI_CTL_80_DATA 0x00000001
+#define DENALI_CTL_81_DATA 0x00000000
+#define DENALI_CTL_82_DATA 0x00000000
+#define DENALI_CTL_83_DATA 0x00012222
+#define DENALI_CTL_84_DATA 0x00000000
+#define DENALI_CTL_85_DATA 0x00000000
+#define DENALI_CTL_86_DATA 0x00222200
+#define DENALI_CTL_87_DATA 0x02020001
+#define DENALI_CTL_88_DATA 0x00020200
+#define DENALI_CTL_89_DATA 0x02000202
+#define DENALI_CTL_90_DATA 0x01000002
+#define DENALI_CTL_91_DATA 0x00000000
+#define DENALI_CTL_92_DATA 0x0003ffff
+#define DENALI_CTL_93_DATA 0x00000000
+#define DENALI_CTL_94_DATA 0x0003ffff
+#define DENALI_CTL_95_DATA 0x00000000
+#define DENALI_CTL_96_DATA 0x0003ffff
+#define DENALI_CTL_97_DATA 0x00000000
+#define DENALI_CTL_98_DATA 0x0003ffff
+#define DENALI_CTL_99_DATA 0x00000000
+#define DENALI_CTL_100_DATA 0x0003ffff
+#define DENALI_CTL_101_DATA 0x00000000
+#define DENALI_CTL_102_DATA 0x0003ffff
+#define DENALI_CTL_103_DATA 0x00000000
+#define DENALI_CTL_104_DATA 0x0003ffff
+#define DENALI_CTL_105_DATA 0x00000000
+#define DENALI_CTL_106_DATA 0x0003ffff
+#define DENALI_CTL_107_DATA 0x00000000
+#define DENALI_CTL_108_DATA 0x0003ffff
+#define DENALI_CTL_109_DATA 0x00000000
+#define DENALI_CTL_110_DATA 0x0003ffff
+#define DENALI_CTL_111_DATA 0x00000000
+#define DENALI_CTL_112_DATA 0x0003ffff
+#define DENALI_CTL_113_DATA 0x00000000
+#define DENALI_CTL_114_DATA 0x0003ffff
+#define DENALI_CTL_115_DATA 0x00000000
+#define DENALI_CTL_116_DATA 0x0003ffff
+#define DENALI_CTL_117_DATA 0x00000000
+#define DENALI_CTL_118_DATA 0x0003ffff
+#define DENALI_CTL_119_DATA 0x00000000
+#define DENALI_CTL_120_DATA 0x0003ffff
+#define DENALI_CTL_121_DATA 0x00000000
+#define DENALI_CTL_122_DATA 0x0003ffff
+#define DENALI_CTL_123_DATA 0x00000000
+#define DENALI_CTL_124_DATA 0x0003ffff
+#define DENALI_CTL_125_DATA 0x00000000
+#define DENALI_CTL_126_DATA 0x0003ffff
+#define DENALI_CTL_127_DATA 0x00000000
+#define DENALI_CTL_128_DATA 0x0003ffff
+#define DENALI_CTL_129_DATA 0x00000000
+#define DENALI_CTL_130_DATA 0x0003ffff
+#define DENALI_CTL_131_DATA 0x00000000
+#define DENALI_CTL_132_DATA 0x0003ffff
+#define DENALI_CTL_133_DATA 0x00000000
+#define DENALI_CTL_134_DATA 0x0003ffff
+#define DENALI_CTL_135_DATA 0x00000000
+#define DENALI_CTL_136_DATA 0x0003ffff
+#define DENALI_CTL_137_DATA 0x00000000
+#define DENALI_CTL_138_DATA 0x0003ffff
+#define DENALI_CTL_139_DATA 0x00000000
+#define DENALI_CTL_140_DATA 0x0003ffff
+#define DENALI_CTL_141_DATA 0x00000000
+#define DENALI_CTL_142_DATA 0x0003ffff
+#define DENALI_CTL_143_DATA 0x00000000
+#define DENALI_CTL_144_DATA 0x0003ffff
+#define DENALI_CTL_145_DATA 0x00000000
+#define DENALI_CTL_146_DATA 0x0003ffff
+#define DENALI_CTL_147_DATA 0x00000000
+#define DENALI_CTL_148_DATA 0x0003ffff
+#define DENALI_CTL_149_DATA 0x00000000
+#define DENALI_CTL_150_DATA 0x0003ffff
+#define DENALI_CTL_151_DATA 0x00000000
+#define DENALI_CTL_152_DATA 0x0003ffff
+#define DENALI_CTL_153_DATA 0x00000000
+#define DENALI_CTL_154_DATA 0x0003ffff
+#define DENALI_CTL_155_DATA 0x00000000
+#define DENALI_CTL_156_DATA 0x0003ffff
+#define DENALI_CTL_157_DATA 0x00000000
+#define DENALI_CTL_158_DATA 0x0003ffff
+#define DENALI_CTL_159_DATA 0x00000000
+#define DENALI_CTL_160_DATA 0x0003ffff
+#define DENALI_CTL_161_DATA 0x00000000
+#define DENALI_CTL_162_DATA 0x0003ffff
+#define DENALI_CTL_163_DATA 0x00000000
+#define DENALI_CTL_164_DATA 0x0003ffff
+#define DENALI_CTL_165_DATA 0x00000000
+#define DENALI_CTL_166_DATA 0x0003ffff
+#define DENALI_CTL_167_DATA 0x00000000
+#define DENALI_CTL_168_DATA 0x0003ffff
+#define DENALI_CTL_169_DATA 0x00000000
+#define DENALI_CTL_170_DATA 0x0003ffff
+#define DENALI_CTL_171_DATA 0x00000000
+#define DENALI_CTL_172_DATA 0x0003ffff
+#define DENALI_CTL_173_DATA 0x00000000
+#define DENALI_CTL_174_DATA 0x0003ffff
+#define DENALI_CTL_175_DATA 0x00000000
+#define DENALI_CTL_176_DATA 0x0003ffff
+#define DENALI_CTL_177_DATA 0x00000000
+#define DENALI_CTL_178_DATA 0x0003ffff
+#define DENALI_CTL_179_DATA 0x00000000
+#define DENALI_CTL_180_DATA 0x0003ffff
+#define DENALI_CTL_181_DATA 0x00000000
+#define DENALI_CTL_182_DATA 0x0003ffff
+#define DENALI_CTL_183_DATA 0x00000000
+#define DENALI_CTL_184_DATA 0x0003ffff
+#define DENALI_CTL_185_DATA 0x00000000
+#define DENALI_CTL_186_DATA 0x0003ffff
+#define DENALI_CTL_187_DATA 0x00000000
+#define DENALI_CTL_188_DATA 0x0003ffff
+#define DENALI_CTL_189_DATA 0x00000000
+#define DENALI_CTL_190_DATA 0x0003ffff
+#define DENALI_CTL_191_DATA 0x00000000
+#define DENALI_CTL_192_DATA 0x0003ffff
+#define DENALI_CTL_193_DATA 0x00000000
+#define DENALI_CTL_194_DATA 0x0003ffff
+#define DENALI_CTL_195_DATA 0x00000000
+#define DENALI_CTL_196_DATA 0x0003ffff
+#define DENALI_CTL_197_DATA 0x00000000
+#define DENALI_CTL_198_DATA 0x0003ffff
+#define DENALI_CTL_199_DATA 0x00000000
+#define DENALI_CTL_200_DATA 0x0003ffff
+#define DENALI_CTL_201_DATA 0x00000000
+#define DENALI_CTL_202_DATA 0x0003ffff
+#define DENALI_CTL_203_DATA 0x00000000
+#define DENALI_CTL_204_DATA 0x0003ffff
+#define DENALI_CTL_205_DATA 0x00000000
+#define DENALI_CTL_206_DATA 0x0003ffff
+#define DENALI_CTL_207_DATA 0x00000000
+#define DENALI_CTL_208_DATA 0x0003ffff
+#define DENALI_CTL_209_DATA 0x00000000
+#define DENALI_CTL_210_DATA 0x0003ffff
+#define DENALI_CTL_211_DATA 0x00000000
+#define DENALI_CTL_212_DATA 0x0003ffff
+#define DENALI_CTL_213_DATA 0x00000000
+#define DENALI_CTL_214_DATA 0x0003ffff
+#define DENALI_CTL_215_DATA 0x00000000
+#define DENALI_CTL_216_DATA 0x0003ffff
+#define DENALI_CTL_217_DATA 0x00000000
+#define DENALI_CTL_218_DATA 0x0303ffff
+#define DENALI_CTL_219_DATA 0xffffffff
+#define DENALI_CTL_220_DATA 0x00030f0f
+#define DENALI_CTL_221_DATA 0xffffffff
+#define DENALI_CTL_222_DATA 0x00030f0f
+#define DENALI_CTL_223_DATA 0xffffffff
+#define DENALI_CTL_224_DATA 0x00030f0f
+#define DENALI_CTL_225_DATA 0xffffffff
+#define DENALI_CTL_226_DATA 0x00030f0f
+#define DENALI_CTL_227_DATA 0xffffffff
+#define DENALI_CTL_228_DATA 0x00030f0f
+#define DENALI_CTL_229_DATA 0xffffffff
+#define DENALI_CTL_230_DATA 0x00030f0f
+#define DENALI_CTL_231_DATA 0xffffffff
+#define DENALI_CTL_232_DATA 0x00030f0f
+#define DENALI_CTL_233_DATA 0xffffffff
+#define DENALI_CTL_234_DATA 0x00030f0f
+#define DENALI_CTL_235_DATA 0xffffffff
+#define DENALI_CTL_236_DATA 0x00030f0f
+#define DENALI_CTL_237_DATA 0xffffffff
+#define DENALI_CTL_238_DATA 0x00030f0f
+#define DENALI_CTL_239_DATA 0xffffffff
+#define DENALI_CTL_240_DATA 0x00030f0f
+#define DENALI_CTL_241_DATA 0xffffffff
+#define DENALI_CTL_242_DATA 0x00030f0f
+#define DENALI_CTL_243_DATA 0xffffffff
+#define DENALI_CTL_244_DATA 0x00030f0f
+#define DENALI_CTL_245_DATA 0xffffffff
+#define DENALI_CTL_246_DATA 0x00030f0f
+#define DENALI_CTL_247_DATA 0xffffffff
+#define DENALI_CTL_248_DATA 0x00030f0f
+#define DENALI_CTL_249_DATA 0xffffffff
+#define DENALI_CTL_250_DATA 0x00030f0f
+#define DENALI_CTL_251_DATA 0xffffffff
+#define DENALI_CTL_252_DATA 0x00030f0f
+#define DENALI_CTL_253_DATA 0xffffffff
+#define DENALI_CTL_254_DATA 0x00030f0f
+#define DENALI_CTL_255_DATA 0xffffffff
+#define DENALI_CTL_256_DATA 0x00030f0f
+#define DENALI_CTL_257_DATA 0xffffffff
+#define DENALI_CTL_258_DATA 0x00030f0f
+#define DENALI_CTL_259_DATA 0xffffffff
+#define DENALI_CTL_260_DATA 0x00030f0f
+#define DENALI_CTL_261_DATA 0xffffffff
+#define DENALI_CTL_262_DATA 0x00030f0f
+#define DENALI_CTL_263_DATA 0xffffffff
+#define DENALI_CTL_264_DATA 0x00030f0f
+#define DENALI_CTL_265_DATA 0xffffffff
+#define DENALI_CTL_266_DATA 0x00030f0f
+#define DENALI_CTL_267_DATA 0xffffffff
+#define DENALI_CTL_268_DATA 0x00030f0f
+#define DENALI_CTL_269_DATA 0xffffffff
+#define DENALI_CTL_270_DATA 0x00030f0f
+#define DENALI_CTL_271_DATA 0xffffffff
+#define DENALI_CTL_272_DATA 0x00030f0f
+#define DENALI_CTL_273_DATA 0xffffffff
+#define DENALI_CTL_274_DATA 0x00030f0f
+#define DENALI_CTL_275_DATA 0xffffffff
+#define DENALI_CTL_276_DATA 0x00030f0f
+#define DENALI_CTL_277_DATA 0xffffffff
+#define DENALI_CTL_278_DATA 0x00030f0f
+#define DENALI_CTL_279_DATA 0xffffffff
+#define DENALI_CTL_280_DATA 0x00030f0f
+#define DENALI_CTL_281_DATA 0xffffffff
+#define DENALI_CTL_282_DATA 0x00030f0f
+#define DENALI_CTL_283_DATA 0xffffffff
+#define DENALI_CTL_284_DATA 0x00030f0f
+#define DENALI_CTL_285_DATA 0xffffffff
+#define DENALI_CTL_286_DATA 0x00030f0f
+#define DENALI_CTL_287_DATA 0xffffffff
+#define DENALI_CTL_288_DATA 0x00030f0f
+#define DENALI_CTL_289_DATA 0xffffffff
+#define DENALI_CTL_290_DATA 0x00030f0f
+#define DENALI_CTL_291_DATA 0xffffffff
+#define DENALI_CTL_292_DATA 0x00030f0f
+#define DENALI_CTL_293_DATA 0xffffffff
+#define DENALI_CTL_294_DATA 0x00030f0f
+#define DENALI_CTL_295_DATA 0xffffffff
+#define DENALI_CTL_296_DATA 0x00030f0f
+#define DENALI_CTL_297_DATA 0xffffffff
+#define DENALI_CTL_298_DATA 0x00030f0f
+#define DENALI_CTL_299_DATA 0xffffffff
+#define DENALI_CTL_300_DATA 0x00030f0f
+#define DENALI_CTL_301_DATA 0xffffffff
+#define DENALI_CTL_302_DATA 0x00030f0f
+#define DENALI_CTL_303_DATA 0xffffffff
+#define DENALI_CTL_304_DATA 0x00030f0f
+#define DENALI_CTL_305_DATA 0xffffffff
+#define DENALI_CTL_306_DATA 0x00030f0f
+#define DENALI_CTL_307_DATA 0xffffffff
+#define DENALI_CTL_308_DATA 0x00030f0f
+#define DENALI_CTL_309_DATA 0xffffffff
+#define DENALI_CTL_310_DATA 0x00030f0f
+#define DENALI_CTL_311_DATA 0xffffffff
+#define DENALI_CTL_312_DATA 0x00030f0f
+#define DENALI_CTL_313_DATA 0xffffffff
+#define DENALI_CTL_314_DATA 0x00030f0f
+#define DENALI_CTL_315_DATA 0xffffffff
+#define DENALI_CTL_316_DATA 0x00030f0f
+#define DENALI_CTL_317_DATA 0xffffffff
+#define DENALI_CTL_318_DATA 0x00030f0f
+#define DENALI_CTL_319_DATA 0xffffffff
+#define DENALI_CTL_320_DATA 0x00030f0f
+#define DENALI_CTL_321_DATA 0xffffffff
+#define DENALI_CTL_322_DATA 0x00030f0f
+#define DENALI_CTL_323_DATA 0xffffffff
+#define DENALI_CTL_324_DATA 0x00030f0f
+#define DENALI_CTL_325_DATA 0xffffffff
+#define DENALI_CTL_326_DATA 0x00030f0f
+#define DENALI_CTL_327_DATA 0xffffffff
+#define DENALI_CTL_328_DATA 0x00030f0f
+#define DENALI_CTL_329_DATA 0xffffffff
+#define DENALI_CTL_330_DATA 0x00030f0f
+#define DENALI_CTL_331_DATA 0xffffffff
+#define DENALI_CTL_332_DATA 0x00030f0f
+#define DENALI_CTL_333_DATA 0xffffffff
+#define DENALI_CTL_334_DATA 0x00030f0f
+#define DENALI_CTL_335_DATA 0xffffffff
+#define DENALI_CTL_336_DATA 0x00030f0f
+#define DENALI_CTL_337_DATA 0xffffffff
+#define DENALI_CTL_338_DATA 0x00030f0f
+#define DENALI_CTL_339_DATA 0xffffffff
+#define DENALI_CTL_340_DATA 0x00030f0f
+#define DENALI_CTL_341_DATA 0xffffffff
+#define DENALI_CTL_342_DATA 0x00030f0f
+#define DENALI_CTL_343_DATA 0xffffffff
+#define DENALI_CTL_344_DATA 0x00030f0f
+#define DENALI_CTL_345_DATA 0xffffffff
+#define DENALI_CTL_346_DATA 0x32030f0f
+#define DENALI_CTL_347_DATA 0x01320001
+#define DENALI_CTL_348_DATA 0x00013200
+#define DENALI_CTL_349_DATA 0x00000132
+#define DENALI_CTL_350_DATA 0x00000000
+#define DENALI_CTL_351_DATA 0x000d0000
+#define DENALI_CTL_352_DATA 0x1e680000
+#define DENALI_CTL_353_DATA 0x02000200
+#define DENALI_CTL_354_DATA 0x02000200
+#define DENALI_CTL_355_DATA 0x00001e68
+#define DENALI_CTL_356_DATA 0x00009808
+#define DENALI_CTL_357_DATA 0x00020608
+#define DENALI_CTL_358_DATA 0x000a0a01
+#define DENALI_CTL_359_DATA 0x00000000
+#define DENALI_CTL_360_DATA 0x00000000
+#define DENALI_CTL_361_DATA 0x04038000
+#define DENALI_CTL_362_DATA 0x07030a07
+#define DENALI_CTL_363_DATA 0x00ffff22
+#define DENALI_CTL_364_DATA 0x000f0010
+#define DENALI_CTL_365_DATA 0x00000000
+#define DENALI_CTL_366_DATA 0x00000000
+#define DENALI_CTL_367_DATA 0x00000000
+#define DENALI_CTL_368_DATA 0x00000000
+#define DENALI_CTL_369_DATA 0x00000000
+#define DENALI_CTL_370_DATA 0x00000204
+#define DENALI_CTL_371_DATA 0x00000000
+#define DENALI_CTL_372_DATA 0x01000001
+#define DENALI_CTL_373_DATA 0x00000001
+#define DENALI_CTL_374_DATA 0x00000000
new file mode 100644
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <common.h>
+#include <dm.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+ gd->bd->bi_boot_params = (CONFIG_SYS_SDRAM_BASE + 0x100);
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ struct udevice *dev;
+ int err;
+
+ /* This will end up calling cadence_ddr_probe() */
+ err = uclass_get_device(UCLASS_RAM, 0, &dev);
+ if (err) {
+ debug("DRAM init failed: %d\n", err);
+ return err;
+ }
+
+ // FIXME: checkpatch says to use dev_read_...
+ if (fdtdec_setup_mem_size_base() != 0)
+ return -EINVAL;
+
+ return 0;
+}
+
+int dram_init_banksize(void)
+{
+ // FIXME: checkpatch says to use dev_read_...
+ fdtdec_setup_memory_banksize();
+
+ return 0;
+}
new file mode 100644
@@ -0,0 +1,26 @@
+CONFIG_ARM=y
+CONFIG_SYS_ARCH_TIMER=y
+CONFIG_SYS_THUMB_BUILD=y
+CONFIG_ARCH_RZN1=y
+CONFIG_SYS_TEXT_BASE=0x20040000
+CONFIG_SYS_MALLOC_LEN=0xb0000
+CONFIG_SYS_MALLOC_F_LEN=0x800
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_DEVICE_TREE="r9a06g032-rzn1d400-lces"
+CONFIG_DEBUG_UART_BASE=0x40060000
+CONFIG_DEBUG_UART_CLOCK=20000000
+CONFIG_SYS_LOAD_ADDR=0x80008000
+CONFIG_DEBUG_UART=y
+CONFIG_SYS_MEMTEST_START=0x80000000
+CONFIG_SYS_MEMTEST_END=0x8fffffff
+CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
+# CONFIG_SYS_ALT_MEMTEST_BITFLIP is not set
+CONFIG_CMD_CLK=y
+CONFIG_OF_CONTROL=y
+CONFIG_RAM=y
+CONFIG_CADENCE_DDR_CTRL=y
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_SYS_NS16550=y
+# CONFIG_EFI_LOADER is not set
new file mode 100644
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Configuration settings for the Schneider LCES board
+ */
+
+#ifndef __LCES_H
+#define __LCES_H
+
+/* Internal RAM */
+#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000
+#define CONFIG_SYS_INIT_RAM_SIZE (1 * 1024 * 1024)
+
+/* DDR */
+#define CONFIG_SYS_SDRAM_BASE 0x80000000
+#define CONFIG_SYS_SDRAM_SIZE (256 * 1024 * 1024)
+
+#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
+
+/* Serial port is memory-mapped as 32-bit registers */
+#define CONFIG_SYS_NS16550_MEM32
+
+#endif /* __LCES2_H */
Add support for Schneider Electronics LCES1 / LCES2 boards, which are based on the Reneasas RZ/N1 SoC devices. The intention is to support both boards using a single defconfig, and to handle the differences at runtime. Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org> --- TODO: remove the debug UART settings from lces_defconfig. arch/arm/dts/r9a06g032-rzn1d400-lces.dts | 50 +++ arch/arm/mach-rzn1/Kconfig | 14 + board/schneider/lces/Kconfig | 12 + board/schneider/lces/Makefile | 3 + board/schneider/lces/ddr_timing.c | 140 ++++++ .../lces/jedec_ddr3_2g_x16_1333h_500_cl8.h | 399 ++++++++++++++++++ board/schneider/lces/lces.c | 41 ++ configs/lces_defconfig | 26 ++ include/configs/lces.h | 22 + 9 files changed, 707 insertions(+) create mode 100644 arch/arm/dts/r9a06g032-rzn1d400-lces.dts create mode 100644 board/schneider/lces/Kconfig create mode 100644 board/schneider/lces/Makefile create mode 100644 board/schneider/lces/ddr_timing.c create mode 100644 board/schneider/lces/jedec_ddr3_2g_x16_1333h_500_cl8.h create mode 100644 board/schneider/lces/lces.c create mode 100644 configs/lces_defconfig create mode 100644 include/configs/lces.h