diff mbox series

[v3,1/9] board: starqltechn: Align DT node overrides with sdm845.dtsi

Message ID 20220712071212.2188390-2-sumit.garg@linaro.org
State New
Headers show
Series New boards support: db845c and qcs404-evb | expand

Commit Message

Sumit Garg July 12, 2022, 7:12 a.m. UTC 
Currently there is a mismatch among DT node overrides in starqltechn
board DTS file and the actual DT nodes in the sdm845.dtsi. So fix that
to align with DT nodes in sdm845.dtsi.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
---
 arch/arm/dts/starqltechn-uboot.dtsi | 18 ++++++++----------
 arch/arm/dts/starqltechn.dts        |  2 +-
 2 files changed, 9 insertions(+), 11 deletions(-)

Comments

Tom Rini July 25, 2022, 9:21 p.m. UTC | #1 
On Tue, Jul 12, 2022 at 12:42:04PM +0530, Sumit Garg wrote:

> Currently there is a mismatch among DT node overrides in starqltechn
> board DTS file and the actual DT nodes in the sdm845.dtsi. So fix that
> to align with DT nodes in sdm845.dtsi.
> 
> Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>

Applied to u-boot/master, thanks!
diff mbox series

Patch

diff --git a/arch/arm/dts/starqltechn-uboot.dtsi b/arch/arm/dts/starqltechn-uboot.dtsi
index b55cccfe14..8d5d09c3a5 100644
--- a/arch/arm/dts/starqltechn-uboot.dtsi
+++ b/arch/arm/dts/starqltechn-uboot.dtsi
@@ -16,16 +16,14 @@ 
 		serial@a84000 {
 			u-boot,dm-pre-reloc;
 		};
-		gcc {
-			clock-controller@100000 {
-				u-boot,dm-pre-reloc;
-			};
-			gpio_north@3900000 {
-				u-boot,dm-pre-reloc;
-			};
-			pinctrl@3900000 {
-				u-boot,dm-pre-reloc;
-			};
+		clock-controller@100000 {
+			u-boot,dm-pre-reloc;
+		};
+		gpio_north@3900000 {
+			u-boot,dm-pre-reloc;
+		};
+		pinctrl_north@3900000 {
+			u-boot,dm-pre-reloc;
 		};
 	};
 };
diff --git a/arch/arm/dts/starqltechn.dts b/arch/arm/dts/starqltechn.dts
index 0261388319..34a4f59cbd 100644
--- a/arch/arm/dts/starqltechn.dts
+++ b/arch/arm/dts/starqltechn.dts
@@ -48,7 +48,7 @@ 
 			status = "okay";
 		};
 
-		pinctrl@3900000 {
+		pinctrl_north@3900000 {
 			muic_i2c: muic_i2c {
 				pins = "GPIO_33", "GPIO_34";
 				drive-strength = <0x2>;