@@ -6,6 +6,8 @@
#include <common.h>
#include <dwc3-uboot.h>
+#include <efi.h>
+#include <efi_loader.h>
#include <errno.h>
#include <miiphy.h>
#include <netdev.h>
@@ -21,6 +23,7 @@
#include <asm/arch/clock.h>
#include <asm/mach-imx/dma.h>
#include <linux/delay.h>
+#include <linux/kernel.h>
#include <power/pmic.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -44,6 +47,32 @@ static void setup_gpmi_nand(void)
}
#endif
+#if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
+struct efi_fw_images fw_images[] = {
+#if defined(CONFIG_TARGET_IMX8MP_RSB3720A1_4G)
+ {
+ .image_type_id = IMX8MP_RSB3720A1_4G_FIT_IMAGE_GUID,
+ .fw_name = u"IMX8MP-RSB3720-FIT",
+ .image_index = 1,
+ },
+#elif defined(CONFIG_TARGET_IMX8MP_RSB3720A1_6G)
+ {
+ .image_type_id = IMX8MP_RSB3720A1_6G_FIT_IMAGE_GUID,
+ .fw_name = u"IMX8MP-RSB3720-FIT",
+ .image_index = 1,
+ },
+#endif
+};
+
+struct efi_capsule_update_info update_info = {
+ .dfu_string = "mmc 2=flash-bin raw 0 0x1B00 mmcpart 1",
+ .images = fw_images,
+};
+
+u8 num_image_type_guids = ARRAY_SIZE(fw_images);
+#endif /* EFI_HAVE_CAPSULE_SUPPORT */
+
+
int board_early_init_f(void)
{
struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
@@ -5,6 +5,8 @@
*/
#include <common.h>
+#include <efi.h>
+#include <efi_loader.h>
#include <env.h>
#include <extension_board.h>
#include <hang.h>
@@ -21,11 +23,37 @@
#include <asm/mach-imx/gpio.h>
#include <asm/mach-imx/mxc_i2c.h>
#include <asm/sections.h>
+#include <linux/kernel.h>
#include "ddr/ddr.h"
DECLARE_GLOBAL_DATA_PTR;
+#if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
+struct efi_fw_images fw_images[] = {
+#if defined(CONFIG_TARGET_IMX8MM_CL_IOT_GATE)
+ {
+ .image_type_id = IMX8MM_CL_IOT_GATE_FIT_IMAGE_GUID,
+ .fw_name = u"IMX8MM-CL-IOT-GATE-FIT",
+ .image_index = 1,
+ },
+#elif defined(CONFIG_TARGET_IMX8MM_CL_IOT_GATE_OPTEE)
+ {
+ .image_type_id = IMX8MM_CL_IOT_GATE_OPTEE_FIT_IMAGE_GUID,
+ .fw_name = u"IMX8MM-CL-IOT-GATE-FIT",
+ .image_index = 1,
+ },
+#endif
+};
+
+struct efi_capsule_update_info update_info = {
+ .dfu_string = "mmc 2=flash-bin raw 0x42 0x1D00 mmcpart 1",
+ .images = fw_images,
+};
+
+u8 num_image_type_guids = ARRAY_SIZE(fw_images);
+#endif /* EFI_HAVE_CAPSULE_SUPPORT */
+
int board_phys_sdram_size(phys_size_t *size)
{
struct lpddr4_tcm_desc *lpddr4_tcm_desc =
@@ -44,7 +44,8 @@ void set_dfu_alt_info(char *interface, char *devstr)
ALLOC_CACHE_ALIGN_BUFFER(char, buf, DFU_ALT_BUF_LEN);
- if (env_get("dfu_alt_info"))
+ if (!CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT) &&
+ env_get("dfu_alt_info"))
return;
memset(buf, 0, sizeof(buf));
@@ -6,15 +6,43 @@
#include <common.h>
#include <cpu_func.h>
#include <dm.h>
+#include <efi.h>
+#include <efi_loader.h>
#include <fdtdec.h>
#include <init.h>
#include <log.h>
#include <virtio_types.h>
#include <virtio.h>
+#include <linux/kernel.h>
+
#ifdef CONFIG_ARM64
#include <asm/armv8/mmu.h>
+#if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
+struct efi_fw_images fw_images[] = {
+#if defined(CONFIG_TARGET_QEMU_ARM_32BIT)
+ {
+ .image_type_id = QEMU_ARM_UBOOT_IMAGE_GUID,
+ .fw_name = u"Qemu-Arm-UBOOT",
+ .image_index = 1,
+ },
+#elif defined(CONFIG_TARGET_QEMU_ARM_64BIT)
+ {
+ .image_type_id = QEMU_ARM64_UBOOT_IMAGE_GUID,
+ .fw_name = u"Qemu-Arm-UBOOT",
+ .image_index = 1,
+ },
+#endif
+};
+
+struct efi_capsule_update_info update_info = {
+ .images = fw_images,
+};
+
+u8 num_image_type_guids = ARRAY_SIZE(fw_images);
+#endif /* EFI_HAVE_CAPSULE_SUPPORT */
+
static struct mm_region qemu_arm64_mem_map[] = {
{
/* Flash */
@@ -2,6 +2,8 @@
#include "pitx_misc.h"
#include <common.h>
+#include <efi.h>
+#include <efi_loader.h>
#include <init.h>
#include <mmc.h>
#include <miiphy.h>
@@ -12,7 +14,7 @@
#include <asm/mach-imx/gpio.h>
#include <asm/mach-imx/iomux-v3.h>
#include <linux/delay.h>
-
+#include <linux/kernel.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -30,6 +32,23 @@ static iomux_v3_cfg_t const uart_pads[] = {
IMX8MQ_PAD_ECSPI1_MISO__UART3_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
};
+#if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
+struct efi_fw_images fw_images[] = {
+ {
+ .image_type_id = KONTRON_PITX_IMX8M_FIT_IMAGE_GUID,
+ .fw_name = u"KONTRON-PITX-IMX8M-UBOOT",
+ .image_index = 1,
+ },
+};
+
+struct efi_capsule_update_info update_info = {
+ .dfu_string = "mmc 0=flash-bin raw 0x42 0x1000 mmcpart 1",
+ .images = fw_images,
+};
+
+u8 num_image_type_guids = ARRAY_SIZE(fw_images);
+#endif /* EFI_HAVE_CAPSULE_SUPPORT */
+
int board_early_init_f(void)
{
struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
@@ -6,12 +6,32 @@
#include <asm/arch/imx-regs.h>
#include <asm/global_data.h>
#include <asm/io.h>
+#include <efi.h>
+#include <efi_loader.h>
#include <fdt_support.h>
#include <linux/errno.h>
+#include <linux/kernel.h>
#include <net.h>
DECLARE_GLOBAL_DATA_PTR;
+#if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
+struct efi_fw_images fw_images[] = {
+ {
+ .image_type_id = KONTRON_SL_MX8MM_FIT_IMAGE_GUID,
+ .fw_name = u"KONTROL-SL-MX8MM-UBOOT",
+ .image_index = 1,
+ },
+};
+
+struct efi_capsule_update_info update_info = {
+ .dfu_string = "sf 0:0=flash-bin raw 0x400 0x1f0000",
+ .images = fw_images,
+};
+
+u8 num_image_type_guids = ARRAY_SIZE(fw_images);
+#endif /* EFI_HAVE_CAPSULE_SUPPORT */
+
int board_phys_sdram_size(phys_size_t *size)
{
u32 ddr_size = readl(M4_BOOTROM_BASE_ADDR);
@@ -3,11 +3,14 @@
#include <common.h>
#include <dm.h>
#include <malloc.h>
+#include <efi.h>
+#include <efi_loader.h>
#include <errno.h>
#include <fsl_ddr.h>
#include <fdt_support.h>
#include <asm/global_data.h>
#include <linux/libfdt.h>
+#include <linux/kernel.h>
#include <env_internal.h>
#include <asm/arch-fsl-layerscape/soc.h>
#include <asm/arch-fsl-layerscape/fsl_icid.h>
@@ -23,6 +26,24 @@
DECLARE_GLOBAL_DATA_PTR;
+#if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
+struct efi_fw_images fw_images[] = {
+ {
+ .image_type_id = KONTRON_SL28_FIT_IMAGE_GUID,
+ .fw_name = u"KONTRON-SL28-FIT",
+ .image_index = 1,
+ },
+};
+
+struct efi_capsule_update_info update_info = {
+ .dfu_string = "sf 0:0=u-boot-bin raw 0x210000 0x1d0000;"
+ "u-boot-env raw 0x3e0000 0x20000",
+ .images = fw_images,
+};
+
+u8 num_image_type_guids = ARRAY_SIZE(fw_images);
+#endif /* EFI_HAVE_CAPSULE_SUPPORT */
+
int board_early_init_f(void)
{
fsl_lsch3_early_init_f();
@@ -7,6 +7,8 @@
#include <cpu_func.h>
#include <cros_ec.h>
#include <dm.h>
+#include <efi.h>
+#include <efi_loader.h>
#include <env_internal.h>
#include <init.h>
#include <led.h>
@@ -14,6 +16,7 @@
#include <asm/global_data.h>
#include <asm/test.h>
#include <asm/u-boot-sandbox.h>
+#include <linux/kernel.h>
#include <malloc.h>
#include <extension_board.h>
@@ -25,6 +28,37 @@
*/
gd_t *gd;
+#if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
+struct efi_fw_images fw_images[] = {
+#if defined(CONFIG_EFI_CAPSULE_FIRMWARE_RAW)
+ {
+ .image_type_id = SANDBOX_UBOOT_IMAGE_GUID,
+ .fw_name = u"SANDBOX-UBOOT",
+ .image_index = 1,
+ },
+ {
+ .image_type_id = SANDBOX_UBOOT_ENV_IMAGE_GUID,
+ .fw_name = u"SANDBOX-UBOOT-ENV",
+ .image_index = 2,
+ },
+#elif defined(CONFIG_EFI_CAPSULE_FIRMWARE_FIT)
+ {
+ .image_type_id = SANDBOX_FIT_IMAGE_GUID,
+ .fw_name = u"SANDBOX-FIT",
+ .image_index = 1,
+ },
+#endif
+};
+
+struct efi_capsule_update_info update_info = {
+ .dfu_string = "sf 0:0=u-boot-bin raw 0x100000 0x50000;"
+ "u-boot-env raw 0x150000 0x200000",
+ .images = fw_images,
+};
+
+u8 num_image_type_guids = ARRAY_SIZE(fw_images);
+#endif /* EFI_HAVE_CAPSULE_SUPPORT */
+
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
/*
* Add a simple GPIO device (don't use with of-platdata as it interferes with
@@ -10,10 +10,43 @@
#include <asm/global_data.h>
#include <asm/io.h>
#include <common.h>
+#include <efi.h>
+#include <efi_loader.h>
#include <env_internal.h>
#include <fdt_support.h>
#include <log.h>
+#include <linux/kernel.h>
+
+#if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
+struct efi_fw_images fw_images[] = {
+ {
+ .image_type_id = DEVELOPERBOX_UBOOT_IMAGE_GUID,
+ .fw_name = u"DEVELOPERBOX-UBOOT",
+ .image_index = 1,
+ },
+ {
+ .image_type_id = DEVELOPERBOX_FIP_IMAGE_GUID,
+ .fw_name = u"DEVELOPERBOX-FIP",
+ .image_index = 2,
+ },
+ {
+ .image_type_id = DEVELOPERBOX_OPTEE_IMAGE_GUID,
+ .fw_name = u"DEVELOPERBOX-OPTEE",
+ .image_index = 3,
+ },
+};
+
+struct efi_capsule_update_info update_info = {
+ .dfu_string = "mtd nor1=u-boot.bin raw 200000 100000;"
+ "fip.bin raw 180000 78000;"
+ "optee.bin raw 500000 100000",
+ .images = fw_images,
+};
+
+u8 num_image_type_guids = ARRAY_SIZE(fw_images);
+#endif /* EFI_HAVE_CAPSULE_SUPPORT */
+
static struct mm_region sc2a11_mem_map[] = {
{
.virt = 0x0UL,
@@ -5,6 +5,8 @@
*/
#include <common.h>
+#include <efi.h>
+#include <efi_loader.h>
#include <env.h>
#include <log.h>
#include <asm/global_data.h>
@@ -20,9 +22,35 @@
#include <generated/dt.h>
#include <soc.h>
#include <linux/ctype.h>
+#include <linux/kernel.h>
#include "fru.h"
+#if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
+struct efi_fw_images fw_images[] = {
+#if defined(XILINX_BOOT_IMAGE_GUID)
+ {
+ .image_type_id = XILINX_BOOT_IMAGE_GUID,
+ .fw_name = u"XILINX-BOOT",
+ .image_index = 1,
+ },
+#endif
+#if defined(XILINX_UBOOT_IMAGE_GUID)
+ {
+ .image_type_id = XILINX_UBOOT_IMAGE_GUID,
+ .fw_name = u"XILINX-UBOOT",
+ .image_index = 2,
+ },
+#endif
+};
+
+struct efi_capsule_update_info update_info = {
+ .images = fw_images,
+};
+
+u8 num_image_type_guids = ARRAY_SIZE(fw_images);
+#endif /* EFI_HAVE_CAPSULE_SUPPORT */
+
#if defined(CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET)
int zynq_board_read_rom_ethaddr(unsigned char *ethaddr)
{
@@ -168,7 +168,8 @@ void set_dfu_alt_info(char *interface, char *devstr)
{
ALLOC_CACHE_ALIGN_BUFFER(char, buf, DFU_ALT_BUF_LEN);
- if (env_get("dfu_alt_info"))
+ if (!CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT) &&
+ env_get("dfu_alt_info"))
return;
memset(buf, 0, sizeof(buf));
@@ -889,7 +889,8 @@ void set_dfu_alt_info(char *interface, char *devstr)
ALLOC_CACHE_ALIGN_BUFFER(char, buf, DFU_ALT_BUF_LEN);
- if (env_get("dfu_alt_info"))
+ if (!CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT) &&
+ env_get("dfu_alt_info"))
return;
memset(buf, 0, sizeof(buf));
@@ -31,6 +31,15 @@
#endif
+/* GUIDs for capsule updatable firmware images */
+#define IMX8MM_CL_IOT_GATE_FIT_IMAGE_GUID \
+ EFI_GUID(0x7a32a939, 0xab92, 0x467b, 0x91, 0x52, \
+ 0x74, 0x77, 0x1b, 0x95, 0xe6, 0x46)
+
+#define IMX8MM_CL_IOT_GATE_OPTEE_FIT_IMAGE_GUID \
+ EFI_GUID(0x0bf1165c, 0x1831, 0x4864, 0x94, 0x5e, \
+ 0xac, 0x3d, 0x38, 0x48, 0xf4, 0x99)
+
#if CONFIG_IS_ENABLED(CMD_MMC)
# define BOOT_TARGET_MMC(func) \
func(MMC, mmc, 2) \
@@ -18,6 +18,15 @@
#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
#define CONFIG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
+/* GUIDs for capsule updatable firmware images */
+#define IMX8MP_RSB3720A1_4G_FIT_IMAGE_GUID \
+ EFI_GUID(0xb1251e89, 0x384a, 0x4635, 0xa8, 0x06, \
+ 0x3a, 0xa0, 0xb0, 0xe9, 0xf9, 0x65)
+
+#define IMX8MP_RSB3720A1_6G_FIT_IMAGE_GUID \
+ EFI_GUID(0xb5fb6f08, 0xe142, 0x4db1, 0x97, 0xea, \
+ 0x5f, 0xd3, 0x6b, 0x9b, 0xe5, 0xb9)
+
#ifdef CONFIG_SPL_BUILD
#define CONFIG_SPL_STACK 0x960000
#define CONFIG_SPL_BSS_START_ADDR 0x0098FC00
@@ -38,6 +38,11 @@
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#endif
+/* GUID for capsule updatable firmware image */
+#define KONTRON_SL_MX8MM_FIT_IMAGE_GUID \
+ EFI_GUID(0xd488e45a, 0x4929, 0x4b55, 0x8c, 0x14, \
+ 0x86, 0xce, 0xa2, 0xcd, 0x66, 0x29)
+
#ifndef CONFIG_SPL_BUILD
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 1) \
@@ -12,6 +12,11 @@
#define CONFIG_SPL_MAX_SIZE (124 * SZ_1K)
#define CONFIG_SYS_MONITOR_LEN (512 * SZ_1K)
+/* GUID for capsule updatable firmware image */
+#define KONTRON_PITX_IMX8M_FIT_IMAGE_GUID \
+ EFI_GUID(0xc898e959, 0x5b1f, 0x4e6d, 0x88, 0xe0, \
+ 0x40, 0xd4, 0x5c, 0xca, 0x13, 0x99)
+
#ifdef CONFIG_SPL_BUILD
#define CONFIG_SPL_STACK 0x187FF0
#define CONFIG_SPL_BSS_START_ADDR 0x00180000
@@ -52,6 +52,11 @@
#define CONFIG_SYS_SPL_MALLOC_START 0x80200000
#define CONFIG_SYS_MONITOR_LEN (1024 * 1024)
+/* GUID for capsule updatable firmware image */
+#define KONTRON_SL28_FIT_IMAGE_GUID \
+ EFI_GUID(0x86ebd44f, 0xfeb8, 0x466f, 0x8b, 0xb8, \
+ 0x89, 0x06, 0x18, 0x45, 0x6d, 0x8b)
+
/* environment */
/* see include/configs/ti_armv7_common.h */
#define ENV_MEM_LAYOUT_SETTINGS \
@@ -17,6 +17,15 @@
#define CONFIG_SYS_BOOTM_LEN SZ_64M
+/* GUIDs for capsule updatable firmware images */
+#define QEMU_ARM_UBOOT_IMAGE_GUID \
+ EFI_GUID(0xf885b085, 0x99f8, 0x45af, 0x84, 0x7d, \
+ 0xd5, 0x14, 0x10, 0x7a, 0x4a, 0x2c)
+
+#define QEMU_ARM64_UBOOT_IMAGE_GUID \
+ EFI_GUID(0x058b7d83, 0x50d5, 0x4c47, 0xa1, 0x95, \
+ 0x60, 0xd8, 0x6a, 0xd3, 0x41, 0xc4)
+
/* For timer, QEMU emulates an ARMv7/ARMv8 architected timer */
/* Environment options */
@@ -14,6 +14,19 @@
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
+/* GUIDs for capsule updatable firmware images */
+#define SANDBOX_UBOOT_IMAGE_GUID \
+ EFI_GUID(0x09d7cf52, 0x0720, 0x4710, 0x91, 0xd1, \
+ 0x08, 0x46, 0x9b, 0x7f, 0xe9, 0xc8)
+
+#define SANDBOX_UBOOT_ENV_IMAGE_GUID \
+ EFI_GUID(0x5a7021f5, 0xfef2, 0x48b4, 0xaa, 0xba, \
+ 0x83, 0x2e, 0x77, 0x74, 0x18, 0xc0)
+
+#define SANDBOX_FIT_IMAGE_GUID \
+ EFI_GUID(0x3673b45d, 0x6a7c, 0x46f3, 0x9e, 0x60, \
+ 0xad, 0xab, 0xb0, 0x3f, 0x79, 0x37)
+
/* Size of our emulated memory */
#define SB_CONCAT(x, y) x ## y
#define SB_TO_UL(s) SB_CONCAT(s, UL)
@@ -51,6 +51,19 @@
"fip.bin raw 180000 78000;" \
"optee.bin raw 500000 100000\0"
+/* GUIDs for capsule updatable firmware images */
+#define DEVELOPERBOX_UBOOT_IMAGE_GUID \
+ EFI_GUID(0x53a92e83, 0x4ef4, 0x473a, 0x8b, 0x0d, \
+ 0xb5, 0xd8, 0xc7, 0xb2, 0xd6, 0x00)
+
+#define DEVELOPERBOX_FIP_IMAGE_GUID \
+ EFI_GUID(0x880866e9, 0x84ba, 0x4793, 0xa9, 0x08, \
+ 0x33, 0xe0, 0xb9, 0x16, 0xf3, 0x98)
+
+#define DEVELOPERBOX_OPTEE_IMAGE_GUID \
+ EFI_GUID(0xc1b629f1, 0xce0e, 0x4894, 0x82, 0xbf, \
+ 0xf0, 0xa3, 0x83, 0x87, 0xe6, 0x30)
+
/* Distro boot settings */
#ifndef CONFIG_SPL_BUILD
#ifdef CONFIG_CMD_USB
@@ -25,6 +25,11 @@
#define CONFIG_SYS_BAUDRATE_TABLE \
{ 4800, 9600, 19200, 38400, 57600, 115200 }
+/* GUID for capsule updatable firmware image */
+#define XILINX_BOOT_IMAGE_GUID \
+ EFI_GUID(0x20c5fba5, 0x0171, 0x457f, 0xb9, 0xcd, \
+ 0xf5, 0x12, 0x9c, 0xd0, 0x72, 0x28)
+
/* Miscellaneous configurable options */
/* Monitor Command Prompt */
@@ -25,6 +25,15 @@
#define CONFIG_SYS_BAUDRATE_TABLE \
{ 4800, 9600, 19200, 38400, 57600, 115200 }
+/* GUIDs for capsule updatable firmware images */
+#define XILINX_BOOT_IMAGE_GUID \
+ EFI_GUID(0xde6066e8, 0x0256, 0x4fad, 0x82, 0x38, \
+ 0xe4, 0x06, 0xe2, 0x74, 0xc4, 0xcf)
+
+#define XILINX_UBOOT_IMAGE_GUID \
+ EFI_GUID(0xcf9ecfd4, 0x938b, 0x41c5, 0x85, 0x51, \
+ 0x1f, 0x88, 0x3a, 0xb7, 0xdc, 0x18)
+
#ifdef CONFIG_NAND_ARASAN
# define CONFIG_SYS_MAX_NAND_DEVICE 1
#endif
@@ -20,6 +20,15 @@
#define CONFIG_SYS_TIMER_COUNTS_DOWN
#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMERBASE + 0x4)
+/* GUIDs for capsule updatable firmware images */
+#define XILINX_BOOT_IMAGE_GUID \
+ EFI_GUID(0x1ba29a15, 0x9969, 0x40aa, 0xb4, 0x24, \
+ 0xe8, 0x61, 0x21, 0x61, 0x86, 0x64)
+
+#define XILINX_UBOOT_IMAGE_GUID \
+ EFI_GUID(0x1a5178f0, 0x87d3, 0x4f36, 0xac, 0x63, \
+ 0x3b, 0x31, 0xa2, 0x3b, 0xe3, 0x05)
+
/* Serial drivers */
/* The following table includes the supported baudrates */
#define CONFIG_SYS_BAUDRATE_TABLE \
@@ -979,6 +979,42 @@ efi_status_t efi_capsule_authenticate(const void *capsule,
#define EFI_CAPSULE_DIR u"\\EFI\\UpdateCapsule\\"
+/**
+ * struct efi_fw_images - List of firmware images updatable through capsule
+ * update
+ *
+ * This structure gives information about the firmware images on the platform
+ * which can be updated through the capsule update mechanism
+ *
+ * @image_type_id: Image GUID. Same value is to be used in the capsule
+ * @fw_name: Name of the firmware image
+ * @image_index: Image Index, same as value passed to SetImage FMP
+ * function
+ */
+struct efi_fw_images {
+ efi_guid_t image_type_id;
+ u16 *fw_name;
+ u8 image_index;
+};
+
+/**
+ * struct efi_capsule_update_info - Information needed for capsule updates
+ *
+ * This structure provides information needed for performing firmware
+ * updates. The structure needs to be initialised per platform, for all
+ * platforms which enable capsule updates
+ *
+ * @dfu_string: String used to populate dfu_alt_info
+ * @images: Pointer to an array of updatable images
+ */
+struct efi_capsule_update_info {
+ const char *dfu_string;
+ struct efi_fw_images *images;
+};
+
+extern struct efi_capsule_update_info update_info;
+extern u8 num_image_type_guids;
+
/**
* Install the ESRT system table.
*
Add a structure which defines the information that is needed for executing capsule updates on a platform. Some information in the structure like the dfu string is used for making the update process more robust while some information like the per platform image GUIDs is used for fixing issues. Initialise this structure in the board file, and use the information for the capsule updates. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> --- Changes since V5: * Create a separate entry in fw_images array per config for boards with multiple configs as suggested by Heinrich. * Removed CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT) check in the board config headers, as suggested by Heinrich. * Add a check in the set_dfu_alt_info functions for the xilinx and qemu platforms to get the board defined value of dfu_alt_info when capsule update feature is enabled. .../imx8mp_rsb3720a1/imx8mp_rsb3720a1.c | 29 +++++++++++++++ .../imx8mm-cl-iot-gate/imx8mm-cl-iot-gate.c | 28 +++++++++++++++ board/emulation/common/qemu_dfu.c | 3 +- board/emulation/qemu-arm/qemu-arm.c | 28 +++++++++++++++ board/kontron/pitx_imx8m/pitx_imx8m.c | 21 ++++++++++- board/kontron/sl-mx8mm/sl-mx8mm.c | 20 +++++++++++ board/kontron/sl28/sl28.c | 21 +++++++++++ board/sandbox/sandbox.c | 34 ++++++++++++++++++ board/socionext/developerbox/developerbox.c | 33 +++++++++++++++++ board/xilinx/common/board.c | 28 +++++++++++++++ board/xilinx/zynq/board.c | 3 +- board/xilinx/zynqmp/zynqmp.c | 3 +- include/configs/imx8mm-cl-iot-gate.h | 9 +++++ include/configs/imx8mp_rsb3720.h | 9 +++++ include/configs/kontron-sl-mx8mm.h | 5 +++ include/configs/kontron_pitx_imx8m.h | 5 +++ include/configs/kontron_sl28.h | 5 +++ include/configs/qemu-arm.h | 9 +++++ include/configs/sandbox.h | 13 +++++++ include/configs/synquacer.h | 13 +++++++ include/configs/xilinx_versal.h | 5 +++ include/configs/xilinx_zynqmp.h | 9 +++++ include/configs/zynq-common.h | 9 +++++ include/efi_loader.h | 36 +++++++++++++++++++ 24 files changed, 374 insertions(+), 4 deletions(-)