From patchwork Wed Jul 1 16:58:44 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Zhiqiang Hou X-Patchwork-Id: 240567 List-Id: U-Boot discussion From: Zhiqiang.Hou at nxp.com (Zhiqiang Hou) Date: Thu, 2 Jul 2020 00:58:44 +0800 Subject: [PATCHv4 03/16] net: tsec: convert to use DM_MDIO when DM_ETH enabled In-Reply-To: <20200701165857.39930-1-Zhiqiang.Hou@nxp.com> References: <20200701165857.39930-1-Zhiqiang.Hou@nxp.com> Message-ID: <20200701165857.39930-4-Zhiqiang.Hou@nxp.com> From: Hou Zhiqiang For the platforms on which the eTSEC driver uses DM_ETH, convert its MDIO controller code to also use DM_MDIO. Note that for handling the TBI PHY (the MAC PCS for SGMII), we still don't register a udevice for it, since we can drive it locally and there is no point in doing otherwise. Signed-off-by: Vladimir Oltean Signed-off-by: Hou Zhiqiang --- V4: - Split the fixed-link PHY support code to a new patch. drivers/net/tsec.c | 43 ++++++++++--------------------------------- 1 file changed, 10 insertions(+), 33 deletions(-) diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c index 3d75acb6b4..babe44691e 100644 --- a/drivers/net/tsec.c +++ b/drivers/net/tsec.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include @@ -681,8 +682,12 @@ static int init_phy(struct tsec_private *priv) if (priv->interface == PHY_INTERFACE_MODE_SGMII) tsec_configure_serdes(priv); +#ifdef CONFIG_DM_ETH + phydev = dm_eth_phy_connect(priv->dev); +#else phydev = phy_connect(priv->bus, priv->phyaddr, priv->dev, priv->interface); +#endif if (!phydev) return 0; @@ -787,14 +792,17 @@ int tsec_standard_init(bd_t *bis) return tsec_eth_init(bis, tsec_info, ARRAY_SIZE(tsec_info)); } #else /* CONFIG_DM_ETH */ + +#ifndef CONFIG_DM_MDIO +#error "TSEC with DM_ETH also requires DM_MDIO" +#endif + int tsec_probe(struct udevice *dev) { struct eth_pdata *pdata = dev_get_platdata(dev); struct tsec_private *priv = dev_get_priv(dev); - struct tsec_mii_mng __iomem *ext_phyregs_mii; struct ofnode_phandle_args phandle_args; u32 tbiaddr = CONFIG_SYS_TBIPA_VALUE; - struct fsl_pq_mdio_info mdio_info; const char *phy_mode; fdt_addr_t reg; ofnode parent; @@ -803,31 +811,6 @@ int tsec_probe(struct udevice *dev) pdata->iobase = (phys_addr_t)dev_read_addr(dev); priv->regs = dev_remap_addr(dev); - if (dev_read_phandle_with_args(dev, "phy-handle", NULL, 0, 0, - &phandle_args)) { - printf("phy-handle does not exist under tsec %s\n", dev->name); - return -ENOENT; - } else { - int reg = ofnode_read_u32_default(phandle_args.node, "reg", 0); - - priv->phyaddr = reg; - } - - parent = ofnode_get_parent(phandle_args.node); - if (!ofnode_valid(parent)) { - printf("No parent node for PHY?\n"); - return -ENOENT; - } - - reg = ofnode_get_addr_index(parent, 0); - if (reg == FDT_ADDR_T_NONE) { - printf("No 'reg' property of MII for external PHY\n"); - return -ENOENT; - } - - ext_phyregs_mii = map_physmem(reg + TSEC_MDIO_REGS_OFFSET, 0, - MAP_NOCACHE); - ret = dev_read_phandle_with_args(dev, "tbi-handle", NULL, 0, 0, &phandle_args); if (ret == 0) { @@ -865,12 +848,6 @@ int tsec_probe(struct udevice *dev) if (priv->interface == PHY_INTERFACE_MODE_SGMII) priv->flags |= TSEC_SGMII; - mdio_info.regs = ext_phyregs_mii; - mdio_info.name = (char *)dev->name; - ret = fsl_pq_mdio_init(NULL, &mdio_info); - if (ret) - return ret; - /* Reset the MAC */ setbits_be32(&priv->regs->maccfg1, MACCFG1_SOFT_RESET); udelay(2); /* Soft Reset must be asserted for 3 TX clocks */