From patchwork Fri Jun 19 11:56:07 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Patrick Delaunay X-Patchwork-Id: 242670 List-Id: U-Boot discussion From: patrick.delaunay at st.com (Patrick Delaunay) Date: Fri, 19 Jun 2020 13:56:07 +0200 Subject: [PATCH v5 1/5] stm32mp1: use the command env info in env_check In-Reply-To: <20200619115611.16375-1-patrick.delaunay@st.com> References: <20200619115611.16375-1-patrick.delaunay@st.com> Message-ID: <20200619115611.16375-2-patrick.delaunay@st.com> Activate CMD_NVEDIT_INFO and use the new command "env info -d -p -q" to automatically save the environment on first boot. This patch allows to remove the env_default variable. Previously sent in serie cmd: env: add option for quiet output on env info http://patchwork.ozlabs.org/project/uboot/list/?series=158105 Resend as separate serie without the "-q" option. END Signed-off-by: Patrick Delaunay --- (no changes since v1) arch/arm/mach-stm32mp/Kconfig | 1 + include/configs/stm32mp1.h | 4 +--- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig index 6c995ed8d8..478fd2f17d 100644 --- a/arch/arm/mach-stm32mp/Kconfig +++ b/arch/arm/mach-stm32mp/Kconfig @@ -46,6 +46,7 @@ config STM32MP15x select STM32_RESET select STM32_SERIAL select SYS_ARCH_TIMER + imply CMD_NVEDIT_INFO imply SYSRESET_PSCI if TFABOOT imply SYSRESET_SYSCON if !TFABOOT help diff --git a/include/configs/stm32mp1.h b/include/configs/stm32mp1.h index f271b84a59..e927787be0 100644 --- a/include/configs/stm32mp1.h +++ b/include/configs/stm32mp1.h @@ -155,9 +155,7 @@ "splashimage=0xc4300000\0" \ "ramdisk_addr_r=0xc4400000\0" \ "altbootcmd=run bootcmd\0" \ - "env_default=1\0" \ - "env_check=if test $env_default -eq 1;"\ - " then env set env_default 0;env save;fi\0" \ + "env_check=if env info -p -d; then env save; fi\0" \ STM32MP_BOOTCMD \ BOOTENV \ "boot_net_usb_start=true\0"