From patchwork Thu Jun 18 23:21:18 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Fabio Estevam X-Patchwork-Id: 242642 List-Id: U-Boot discussion From: festevam at gmail.com (Fabio Estevam) Date: Thu, 18 Jun 2020 20:21:18 -0300 Subject: [PATCH v3 2/4] net: fec: Allow the PHY node to be retrieved In-Reply-To: <20200618232120.3289-1-festevam@gmail.com> References: <20200618232120.3289-1-festevam@gmail.com> Message-ID: <20200618232120.3289-2-festevam@gmail.com> As we move towards driver model, it is required to let the FEC driver know how to properly deal with an Ethernet PHY subnode in the device tree. For example: &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_microsom_enet_ar8035>; phy-handle = <&phy>; phy-mode = "rgmii-id"; phy-reset-duration = <2>; phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; status = "okay"; mdio { #address-cells = <1>; #size-cells = <0>; phy: ethernet-phy at 0 { reg = <0>; qca,clk-out-frequency = <125000000>; }; }; }; Currently the PHY node pointer is incorrectly associated with the Ethernel controller instead of the PHY node itself. This causes the PHY properties, such as "qca,clk-out-frequency" in the example above to not get parsed. Fix this problem by populating the phy_of_node node. Suggested-by: Vladimir Oltean Signed-off-by: Fabio Estevam Tested-by: Tom Rini --- Changes since v2: - None drivers/net/fec_mxc.c | 7 +++++-- drivers/net/fec_mxc.h | 1 + 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index 9ae2db033e..992180df86 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -1294,7 +1294,7 @@ static const struct eth_ops fecmxc_ops = { .read_rom_hwaddr = fecmxc_read_rom_hwaddr, }; -static int device_get_phy_addr(struct udevice *dev) +static int device_get_phy_addr(struct fec_priv *priv, struct udevice *dev) { struct ofnode_phandle_args phandle_args; int reg; @@ -1305,6 +1305,8 @@ static int device_get_phy_addr(struct udevice *dev) return -ENODEV; } + priv->phy_of_node = phandle_args.node; + reg = ofnode_read_u32_default(phandle_args.node, "reg", 0); return reg; @@ -1315,7 +1317,7 @@ static int fec_phy_init(struct fec_priv *priv, struct udevice *dev) struct phy_device *phydev; int addr; - addr = device_get_phy_addr(dev); + addr = device_get_phy_addr(priv, dev); #ifdef CONFIG_FEC_MXC_PHYADDR addr = CONFIG_FEC_MXC_PHYADDR; #endif @@ -1325,6 +1327,7 @@ static int fec_phy_init(struct fec_priv *priv, struct udevice *dev) return -ENODEV; priv->phydev = phydev; + priv->phydev->node = priv->phy_of_node; phy_config(phydev); return 0; diff --git a/drivers/net/fec_mxc.h b/drivers/net/fec_mxc.h index 0e8f08a51a..659d62646f 100644 --- a/drivers/net/fec_mxc.h +++ b/drivers/net/fec_mxc.h @@ -250,6 +250,7 @@ struct fec_priv { struct mii_dev *bus; #ifdef CONFIG_PHYLIB struct phy_device *phydev; + ofnode phy_of_node; #else int phy_id; int (*mii_postcall)(int);