From patchwork Thu Jun 18 15:39:48 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jagan Teki X-Patchwork-Id: 242615 List-Id: U-Boot discussion From: jagan at amarulasolutions.com (Jagan Teki) Date: Thu, 18 Jun 2020 21:09:48 +0530 Subject: [PATCH v4 5/5] roc-rk3399-pc: Set LED only during POR and pwr_key=y In-Reply-To: <20200618153948.218506-1-jagan@amarulasolutions.com> References: <20200618153948.218506-1-jagan@amarulasolutions.com> Message-ID: <20200618153948.218506-6-jagan@amarulasolutions.com> ROC-RK3399-PC has specific set of configurations for on-board led setup. Due to easiness for user to know the state of the board roc-rk339-pc board code will setup the low power led on/off, and waiting for user to press power key and then glow full power led. All this needs to happen only during power-on-reset not for soft reset or WDT. Also, it is not a proper usage to ask the user to press the Power key if the board connected remotely, so add the environment variable 'pwr_key' to check as well. So, user need to press Power key only - during POR - pwr_key=y Tested-by: Suniel Mahesh Signed-off-by: Jagan Teki --- Changes for v4: - none board/firefly/roc-pc-rk3399/spl.c | 35 ++++++++++++++++++++++- configs/roc-pc-mezzanine-rk3399_defconfig | 4 ++- configs/roc-pc-rk3399_defconfig | 4 ++- 3 files changed, 40 insertions(+), 3 deletions(-) diff --git a/board/firefly/roc-pc-rk3399/spl.c b/board/firefly/roc-pc-rk3399/spl.c index a7664c6b86..771a7fb2f2 100644 --- a/board/firefly/roc-pc-rk3399/spl.c +++ b/board/firefly/roc-pc-rk3399/spl.c @@ -4,16 +4,49 @@ */ #include +#include #include +#include +#include #include +#include +#define PMUGRF_BASE 0xff320000 #define GPIO0_BASE 0xff720000 +/** + * LED setup for roc-rk3399-pc + * + * 1. Set the low power leds (only during POR, pwr_key env is 'y') + * glow yellow LED, termed as low power + * poll for on board power key press + * once powe key pressed, turn off yellow + * 2. Turn on red LED, indicating full power mode + */ static void led_setup(void) { struct rockchip_gpio_regs * const gpio0 = (void *)GPIO0_BASE; + struct rk3399_pmugrf_regs * const pmugrf = (void *)PMUGRF_BASE; + bool press_pwr_key = false; + + if (IS_ENABLED(CONFIG_SPL_ENV_SUPPORT)) { + env_init(); + env_load(); + if (env_get_yesno("pwr_key") == 1) + press_pwr_key = true; + } + + if (press_pwr_key && !strcmp(get_reset_cause(), "POR")) { + spl_gpio_output(gpio0, GPIO(BANK_A, 2), 1); + + spl_gpio_set_pull(&pmugrf->gpio0_p, GPIO(BANK_A, 5), + GPIO_PULL_NORMAL); + while (readl(&gpio0->ext_port) & 0x20) + ; + + spl_gpio_output(gpio0, GPIO(BANK_A, 2), 0); + } - /* Turn on red LED, indicating full power mode */ spl_gpio_output(gpio0, GPIO(BANK_B, 5), 1); } diff --git a/configs/roc-pc-mezzanine-rk3399_defconfig b/configs/roc-pc-mezzanine-rk3399_defconfig index 060b4bfecf..7ca9fd0906 100644 --- a/configs/roc-pc-mezzanine-rk3399_defconfig +++ b/configs/roc-pc-mezzanine-rk3399_defconfig @@ -18,7 +18,8 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-roc-pc-mezzanine.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set CONFIG_SPL_STACK_R=y -CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x20000 +CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_LOAD=y CONFIG_TPL=y CONFIG_CMD_BOOTZ=y @@ -33,6 +34,7 @@ CONFIG_DEFAULT_DEVICE_TREE="rk3399-roc-pc-mezzanine" CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_ROCKCHIP_GPIO=y CONFIG_SYS_I2C_ROCKCHIP=y CONFIG_MISC=y diff --git a/configs/roc-pc-rk3399_defconfig b/configs/roc-pc-rk3399_defconfig index 9897a52cd8..440c1ab303 100644 --- a/configs/roc-pc-rk3399_defconfig +++ b/configs/roc-pc-rk3399_defconfig @@ -18,7 +18,8 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-roc-pc.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set CONFIG_SPL_STACK_R=y -CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x20000 +CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_LOAD=y CONFIG_TPL=y CONFIG_CMD_BOOTZ=y @@ -32,6 +33,7 @@ CONFIG_DEFAULT_DEVICE_TREE="rk3399-roc-pc" CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_ROCKCHIP_GPIO=y CONFIG_SYS_I2C_ROCKCHIP=y CONFIG_MISC=y