diff mbox series

[RFC,4/4] linux/kconfig.h: create two- and three-argument versions of CONFIG_IS_ENABLED

Message ID 20200612110216.10355-5-rasmus.villemoes@prevas.dk
State Accepted
Commit 7842749c351f3bb3976ca56c2ef5793e6b2cce97
Headers show
Series CONFIG_IS_ENABLED magic | expand

Commit Message

Rasmus Villemoes June 12, 2020, 11:02 a.m. UTC
This adds a bunch of preprocessor magic to extend the capabilities of
CONFIG_IS_ENABLED. The existing semantics of

  CONFIG_IS_ENABLED(FOO)

expanding to a 1 or 0 (depending on build context and the defined-ness
or not of the appropriate CONFIG_FOO/CONFIG_SPL_FOO/CONFIG_TPL_FOO)
are of course preserved. With this, one is also allowed a two-argument
form

  CONFIG_IS_ENABLED(FOO, (something))

which expands to something precisely when CONFIG_IS_ENABLED(FOO) would
expand to 1, and expands to nothing otherwise. It is, in other words,
completely equivalent to the three lines

  #if CONFIG_IS_ENABLED(FOO)
  something
  #endif

The second argument must be parenthesized in order to allow any
tokens, including a trailing comma, to appear - one use case for this
is precisely to make it a bit more ergonomic to build an array and
only include certain items depending on .config. That should increase
both readability and not least "git grep"ability.

A third variant is also introduced,

  CONFIG_IS_ENABLED(FOO, (xxx), (yyy))

which corresponds to

  #if CONFIG_IS_ENABLED(FOO)
  xxx
  #else
  yyy
  #endif

Signed-off-by: Rasmus Villemoes <rasmus.villemoes at prevas.dk>
---
 include/linux/kconfig.h | 48 ++++++++++++++++++++++++++++++++++++++---
 1 file changed, 45 insertions(+), 3 deletions(-)

Comments

Simon Glass June 16, 2020, 11:31 p.m. UTC | #1
Hi Rasmus,

On Fri, 12 Jun 2020 at 05:02, Rasmus Villemoes
<rasmus.villemoes at prevas.dk> wrote:
>
> This adds a bunch of preprocessor magic to extend the capabilities of
> CONFIG_IS_ENABLED. The existing semantics of
>
>   CONFIG_IS_ENABLED(FOO)
>
> expanding to a 1 or 0 (depending on build context and the defined-ness
> or not of the appropriate CONFIG_FOO/CONFIG_SPL_FOO/CONFIG_TPL_FOO)
> are of course preserved. With this, one is also allowed a two-argument
> form
>
>   CONFIG_IS_ENABLED(FOO, (something))
>
> which expands to something precisely when CONFIG_IS_ENABLED(FOO) would
> expand to 1, and expands to nothing otherwise. It is, in other words,
> completely equivalent to the three lines
>
>   #if CONFIG_IS_ENABLED(FOO)
>   something
>   #endif
>
> The second argument must be parenthesized in order to allow any
> tokens, including a trailing comma, to appear - one use case for this
> is precisely to make it a bit more ergonomic to build an array and
> only include certain items depending on .config. That should increase
> both readability and not least "git grep"ability.
>
> A third variant is also introduced,
>
>   CONFIG_IS_ENABLED(FOO, (xxx), (yyy))
>
> which corresponds to
>
>   #if CONFIG_IS_ENABLED(FOO)
>   xxx
>   #else
>   yyy
>   #endif
>
> Signed-off-by: Rasmus Villemoes <rasmus.villemoes at prevas.dk>
> ---
>  include/linux/kconfig.h | 48 ++++++++++++++++++++++++++++++++++++++---
>  1 file changed, 45 insertions(+), 3 deletions(-)

Reviewed-by: Simon Glass <sjg at chromium.org>

See also this:

http://patchwork.ozlabs.org/project/uboot/patch/20200522020223.230834-2-sjg at chromium.org/

but I think your idea is a lot nicer.

Regards,
Simon
diff mbox series

Patch

diff --git a/include/linux/kconfig.h b/include/linux/kconfig.h
index caea505a0e..d109ed3119 100644
--- a/include/linux/kconfig.h
+++ b/include/linux/kconfig.h
@@ -56,13 +56,55 @@ 
 #define CONFIG_VAL(option)  config_val(option)
 
 /*
- * CONFIG_IS_ENABLED(FOO) evaluates to
+ * Count number of arguments to a variadic macro. Currently only need
+ * it for 1, 2 or 3 arguments.
+ */
+#define __arg6(a1, a2, a3, a4, a5, a6, ...) a6
+#define __count_args(...) __arg6(dummy, ##__VA_ARGS__, 4, 3, 2, 1, 0)
+
+#define __concat(a, b)   ___concat(a, b)
+#define ___concat(a, b)  a ## b
+
+#define __unwrap(...) __VA_ARGS__
+#define __unwrap1(case1, case0) __unwrap case1
+#define __unwrap0(case1, case0) __unwrap case0
+
+#define __CONFIG_IS_ENABLED_1(option)        __CONFIG_IS_ENABLED_3(option, (1), (0))
+#define __CONFIG_IS_ENABLED_2(option, case1) __CONFIG_IS_ENABLED_3(option, case1, ())
+#define __CONFIG_IS_ENABLED_3(option, case1, case0) \
+	__concat(__unwrap, config_enabled(CONFIG_VAL(option))) (case1, case0)
+
+/*
+ * CONFIG_IS_ENABLED(FOO) expands to
  *  1 if CONFIG_SPL_BUILD is undefined and CONFIG_FOO is set to 'y',
  *  1 if CONFIG_SPL_BUILD is defined and CONFIG_SPL_FOO is set to 'y',
  *  1 if CONFIG_TPL_BUILD is defined and CONFIG_TPL_FOO is set to 'y',
  *  0 otherwise.
+ *
+ * CONFIG_IS_ENABLED(FOO, (abc)) expands to
+ *  abc if CONFIG_SPL_BUILD is undefined and CONFIG_FOO is set to 'y',
+ *  abc if CONFIG_SPL_BUILD is defined and CONFIG_SPL_FOO is set to 'y',
+ *  abc if CONFIG_TPL_BUILD is defined and CONFIG_TPL_FOO is set to 'y',
+ *  nothing otherwise.
+ *
+ * CONFIG_IS_ENABLED(FOO, (abc), (def)) expands to
+ *  abc if CONFIG_SPL_BUILD is undefined and CONFIG_FOO is set to 'y',
+ *  abc if CONFIG_SPL_BUILD is defined and CONFIG_SPL_FOO is set to 'y',
+ *  abc if CONFIG_TPL_BUILD is defined and CONFIG_TPL_FOO is set to 'y',
+ *  def otherwise.
+ *
+ * The optional second and third arguments must be parenthesized; that
+ * allows one to include a trailing comma, e.g. for use in
+ *
+ * CONFIG_IS_ENABLED(ACME, ({.compatible = "acme,frobnozzle"},))
+ *
+ * which adds an entry to the array being defined if CONFIG_ACME (or
+ * CONFIG_SPL_ACME/CONFIG_TPL_ACME, depending on build context) is
+ * set, and nothing otherwise.
  */
-#define CONFIG_IS_ENABLED(option) \
-	(config_enabled(CONFIG_VAL(option)))
+
+#define CONFIG_IS_ENABLED(option, ...)					\
+	__concat(__CONFIG_IS_ENABLED_, __count_args(option, ##__VA_ARGS__)) (option, ##__VA_ARGS__)
+
 
 #endif /* __LINUX_KCONFIG_H */