From patchwork Wed Jun 10 20:16:12 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tom Rini X-Patchwork-Id: 242102 List-Id: U-Boot discussion From: trini at konsulko.com (Tom Rini) Date: Wed, 10 Jun 2020 16:16:12 -0400 Subject: [PATCH 08/30] Convert CONFIG_ATMEL_USART to Kconfig In-Reply-To: <20200610201634.8457-1-trini@konsulko.com> References: <20200610201634.8457-1-trini@konsulko.com> Message-ID: <20200610201634.8457-9-trini@konsulko.com> This converts the following to Kconfig: CONFIG_ATMEL_USART Signed-off-by: Tom Rini --- configs/at91rm9200ek_defconfig | 1 + configs/at91rm9200ek_ram_defconfig | 1 + configs/gurnard_defconfig | 1 + configs/picosam9g45_defconfig | 1 + configs/smartweb_defconfig | 1 + configs/snapper9260_defconfig | 1 + configs/snapper9g20_defconfig | 1 + configs/vinco_defconfig | 1 + configs/wb45n_defconfig | 1 + configs/wb50n_defconfig | 1 + include/configs/at91rm9200ek.h | 1 - include/configs/picosam9g45.h | 1 - include/configs/smartweb.h | 1 - include/configs/snapper9260.h | 1 - include/configs/snapper9g45.h | 1 - include/configs/vinco.h | 1 - include/configs/wb45n.h | 1 - include/configs/wb50n.h | 1 - 18 files changed, 10 insertions(+), 8 deletions(-) diff --git a/configs/at91rm9200ek_defconfig b/configs/at91rm9200ek_defconfig index 2aaf87904562..a990360794f4 100644 --- a/configs/at91rm9200ek_defconfig +++ b/configs/at91rm9200ek_defconfig @@ -29,6 +29,7 @@ CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y CONFIG_MII=y +CONFIG_ATMEL_USART=y CONFIG_USB=y CONFIG_USB_STORAGE=y CONFIG_USB_KEYBOARD=y diff --git a/configs/at91rm9200ek_ram_defconfig b/configs/at91rm9200ek_ram_defconfig index 9d2fc473430b..143346158b47 100644 --- a/configs/at91rm9200ek_ram_defconfig +++ b/configs/at91rm9200ek_ram_defconfig @@ -30,6 +30,7 @@ CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y CONFIG_MII=y +CONFIG_ATMEL_USART=y CONFIG_USB=y CONFIG_USB_STORAGE=y CONFIG_USB_KEYBOARD=y diff --git a/configs/gurnard_defconfig b/configs/gurnard_defconfig index a679c0f6700b..5e0d6f7c2329 100644 --- a/configs/gurnard_defconfig +++ b/configs/gurnard_defconfig @@ -39,6 +39,7 @@ CONFIG_MTD_RAW_NAND=y CONFIG_NAND_ATMEL=y CONFIG_ATMEL_NAND_HWECC=y CONFIG_PHYLIB=y +CONFIG_ATMEL_USART=y CONFIG_TIMER=y CONFIG_ATMEL_PIT_TIMER=y CONFIG_USB=y diff --git a/configs/picosam9g45_defconfig b/configs/picosam9g45_defconfig index 2921f2dfd4f7..03783a2af067 100644 --- a/configs/picosam9g45_defconfig +++ b/configs/picosam9g45_defconfig @@ -40,6 +40,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_SPL_DM=y CONFIG_AT91_GPIO=y +CONFIG_ATMEL_USART=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/configs/smartweb_defconfig b/configs/smartweb_defconfig index 4545c7075b3f..e7edb01c41d9 100644 --- a/configs/smartweb_defconfig +++ b/configs/smartweb_defconfig @@ -56,6 +56,7 @@ CONFIG_MTD_RAW_NAND=y # CONFIG_SYS_NAND_USE_FLASH_BBT is not set CONFIG_NAND_ATMEL=y CONFIG_PHYLIB=y +CONFIG_ATMEL_USART=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_GADGET=y diff --git a/configs/snapper9260_defconfig b/configs/snapper9260_defconfig index 9e44395f03f0..fa4697989b85 100644 --- a/configs/snapper9260_defconfig +++ b/configs/snapper9260_defconfig @@ -37,5 +37,6 @@ CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y # CONFIG_SYS_NAND_USE_FLASH_BBT is not set CONFIG_NAND_ATMEL=y +CONFIG_ATMEL_USART=y CONFIG_USB=y CONFIG_USB_STORAGE=y diff --git a/configs/snapper9g20_defconfig b/configs/snapper9g20_defconfig index e1c5c2ef4c1f..abe033373459 100644 --- a/configs/snapper9g20_defconfig +++ b/configs/snapper9g20_defconfig @@ -36,5 +36,6 @@ CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y # CONFIG_SYS_NAND_USE_FLASH_BBT is not set CONFIG_NAND_ATMEL=y +CONFIG_ATMEL_USART=y CONFIG_USB=y CONFIG_USB_STORAGE=y diff --git a/configs/vinco_defconfig b/configs/vinco_defconfig index 8ca7556772b8..d4852eafe0d4 100644 --- a/configs/vinco_defconfig +++ b/configs/vinco_defconfig @@ -38,6 +38,7 @@ CONFIG_SF_DEFAULT_MODE=0 CONFIG_SF_DEFAULT_SPEED=50000000 CONFIG_PHY_SMSC=y CONFIG_ETH_DESIGNWARE=y +CONFIG_ATMEL_USART=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/configs/wb45n_defconfig b/configs/wb45n_defconfig index d770e007a655..ef069a672cc2 100644 --- a/configs/wb45n_defconfig +++ b/configs/wb45n_defconfig @@ -40,6 +40,7 @@ CONFIG_MTD_RAW_NAND=y CONFIG_NAND_ATMEL=y CONFIG_PMECC_CAP=4 CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER=y +CONFIG_ATMEL_USART=y CONFIG_LZMA=y CONFIG_LZO=y CONFIG_OF_LIBFDT=y diff --git a/configs/wb50n_defconfig b/configs/wb50n_defconfig index e764c303d069..1b444f07529d 100644 --- a/configs/wb50n_defconfig +++ b/configs/wb50n_defconfig @@ -43,5 +43,6 @@ CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER=y CONFIG_PHYLIB=y CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ90X1=y +CONFIG_ATMEL_USART=y CONFIG_LZMA=y CONFIG_OF_LIBFDT=y diff --git a/include/configs/at91rm9200ek.h b/include/configs/at91rm9200ek.h index 378f9dc48be4..5e1e59074758 100644 --- a/include/configs/at91rm9200ek.h +++ b/include/configs/at91rm9200ek.h @@ -96,7 +96,6 @@ * CONFIG_DBGU is DBGU unit on J10 * CONFIG_USART1 is USART1 on J14 */ -#define CONFIG_ATMEL_USART #define CONFIG_USART_BASE ATMEL_BASE_DBGU #define CONFIG_USART_ID 0/* ignored in arm */ diff --git a/include/configs/picosam9g45.h b/include/configs/picosam9g45.h index 94d9111cbaae..3eb70d5e7821 100644 --- a/include/configs/picosam9g45.h +++ b/include/configs/picosam9g45.h @@ -31,7 +31,6 @@ #define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */ /* serial console */ -#define CONFIG_ATMEL_USART #define CONFIG_USART_BASE ATMEL_BASE_DBGU #define CONFIG_USART_ID ATMEL_ID_SYS diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h index 8c964087131d..9498513f76f1 100644 --- a/include/configs/smartweb.h +++ b/include/configs/smartweb.h @@ -88,7 +88,6 @@ #define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */ /* serial console */ -#define CONFIG_ATMEL_USART #define CONFIG_USART_BASE ATMEL_BASE_DBGU #define CONFIG_USART_ID ATMEL_ID_SYS diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h index 32dd544a6c75..cbef61877e28 100644 --- a/include/configs/snapper9260.h +++ b/include/configs/snapper9260.h @@ -68,7 +68,6 @@ #define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x28, 16} } /* UARTs/Serial console */ -#define CONFIG_ATMEL_USART #ifndef CONFIG_DM_SERIAL #define CONFIG_USART_BASE ATMEL_BASE_DBGU #define CONFIG_USART_ID ATMEL_ID_SYS diff --git a/include/configs/snapper9g45.h b/include/configs/snapper9g45.h index db4fd9be247f..24bbea7d03b5 100644 --- a/include/configs/snapper9g45.h +++ b/include/configs/snapper9g45.h @@ -63,7 +63,6 @@ #define CONFIG_AT91_GPIO_PULLUP 1 /* UARTs/Serial console */ -#define CONFIG_ATMEL_USART /* Boot options */ #define CONFIG_SYS_LOAD_ADDR 0x23000000 diff --git a/include/configs/vinco.h b/include/configs/vinco.h index 83ec78dc4315..496c228b58ea 100644 --- a/include/configs/vinco.h +++ b/include/configs/vinco.h @@ -17,7 +17,6 @@ /* The value in the common file is too far away for the VInCo platform */ /* serial console */ -#define CONFIG_ATMEL_USART #define CONFIG_USART_BASE 0xfc00c000 #define CONFIG_USART_ID 30 diff --git a/include/configs/wb45n.h b/include/configs/wb45n.h index f13ad112f793..8b333de8cffd 100644 --- a/include/configs/wb45n.h +++ b/include/configs/wb45n.h @@ -22,7 +22,6 @@ #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ /* serial console */ -#define CONFIG_ATMEL_USART #define CONFIG_USART_BASE ATMEL_BASE_DBGU #define CONFIG_USART_ID ATMEL_ID_SYS diff --git a/include/configs/wb50n.h b/include/configs/wb50n.h index ffcc9877eddb..c2112763a2bb 100644 --- a/include/configs/wb50n.h +++ b/include/configs/wb50n.h @@ -21,7 +21,6 @@ #endif /* serial console */ -#define CONFIG_ATMEL_USART #define CONFIG_USART_BASE ATMEL_BASE_DBGU #define CONFIG_USART_ID ATMEL_ID_DBGU