From patchwork Fri Jun 5 08:55:08 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Zhiqiang Hou X-Patchwork-Id: 241782 List-Id: U-Boot discussion From: Zhiqiang.Hou at nxp.com (Zhiqiang Hou) Date: Fri, 5 Jun 2020 16:55:08 +0800 Subject: [PATCHv2 04/13] fsl: p1_p2_rdb: Move vsc7835 firmware uploading to board_early_init_r() In-Reply-To: <20200605085517.13046-1-Zhiqiang.Hou@nxp.com> References: <20200605085517.13046-1-Zhiqiang.Hou@nxp.com> Message-ID: <20200605085517.13046-5-Zhiqiang.Hou@nxp.com> From: Hou Zhiqiang Move vsc7835 firmware uploading to board_early_init_r(), so that the switch also can work in DM eTSEC driver. Signed-off-by: Hou Zhiqiang --- V2: - Rebase the patch, no change intended. board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 35 +++++++++++---------- 1 file changed, 18 insertions(+), 17 deletions(-) diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c index f668d7efb1..671109a73a 100644 --- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c +++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c @@ -313,6 +313,10 @@ int board_early_init_r(void) { const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; int flash_esel = find_tlb_idx((void *)flashbase, 1); +#ifdef CONFIG_VSC7385_ENET + unsigned int vscfw_addr; + char *tmp; +#endif /* * Remap Boot flash region to caching-inhibited @@ -335,6 +339,20 @@ int board_early_init_r(void) set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, /* tlb, epn, rpn */ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,/* perms, wimge */ 0, flash_esel, BOOKE_PAGESZ_64M, 1);/* ts, esel, tsize, iprot */ + +#ifdef CONFIG_VSC7385_ENET + /* If a VSC7385 microcode image is present, then upload it. */ + tmp = env_get("vscfw_addr"); + if (tmp) { + vscfw_addr = simple_strtoul(tmp, NULL, 16); + printf("uploading VSC7385 microcode from %x\n", vscfw_addr); + if (vsc7385_upload_firmware((void *)vscfw_addr, + CONFIG_VSC7385_IMAGE_SIZE)) + puts("Failure uploading VSC7385 microcode.\n"); + } else { + puts("No address specified for VSC7385 microcode.\n"); + } +#endif return 0; } @@ -345,10 +363,6 @@ int board_eth_init(bd_t *bis) ccsr_gur_t *gur __attribute__((unused)) = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); int num = 0; -#ifdef CONFIG_VSC7385_ENET - char *tmp; - unsigned int vscfw_addr; -#endif #ifdef CONFIG_TSEC1 SET_STD_TSEC_INFO(tsec_info[num], 1); @@ -372,19 +386,6 @@ int board_eth_init(bd_t *bis) return 0; } -#ifdef CONFIG_VSC7385_ENET - /* If a VSC7385 microcode image is present, then upload it. */ - tmp = env_get("vscfw_addr"); - if (tmp) { - vscfw_addr = simple_strtoul(tmp, NULL, 16); - printf("uploading VSC7385 microcode from %x\n", vscfw_addr); - if (vsc7385_upload_firmware((void *) vscfw_addr, - CONFIG_VSC7385_IMAGE_SIZE)) - puts("Failure uploading VSC7385 microcode.\n"); - } else - puts("No address specified for VSC7385 microcode.\n"); -#endif - mdio_info.regs = TSEC_GET_MDIO_REGS_BASE(1); mdio_info.name = DEFAULT_MII_NAME;