From patchwork Fri Jun 5 08:55:13 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Zhiqiang Hou X-Patchwork-Id: 241788 List-Id: U-Boot discussion From: Zhiqiang.Hou at nxp.com (Zhiqiang Hou) Date: Fri, 5 Jun 2020 16:55:13 +0800 Subject: [PATCHv2 09/13] dts: powerpc: p1010rdb: Add eTSEC DT nodes In-Reply-To: <20200605085517.13046-1-Zhiqiang.Hou@nxp.com> References: <20200605085517.13046-1-Zhiqiang.Hou@nxp.com> Message-ID: <20200605085517.13046-10-Zhiqiang.Hou@nxp.com> From: Hou Zhiqiang P1010RDB implements 3 enhanced three-speed Ethernet controllers, and the connection is shown below: eTSEC1: Connected to RGMII PHY AR8033 eTSEC2: Connected to SGMII PHY AR8033 eTSEC3: Connected to SGMII PHY AR8033 Signed-off-by: Hou Zhiqiang --- V2: - Rebase the patch, no change intended. arch/powerpc/dts/p1010rdb-pa.dts | 1 + arch/powerpc/dts/p1010rdb-pa_36b.dts | 1 + arch/powerpc/dts/p1010rdb.dtsi | 62 ++++++++++++++++++++++++++++ arch/powerpc/dts/p1010si-post.dtsi | 25 +++++++++++ 4 files changed, 89 insertions(+) diff --git a/arch/powerpc/dts/p1010rdb-pa.dts b/arch/powerpc/dts/p1010rdb-pa.dts index c66c4923ac..360d254d91 100644 --- a/arch/powerpc/dts/p1010rdb-pa.dts +++ b/arch/powerpc/dts/p1010rdb-pa.dts @@ -15,3 +15,4 @@ }; /include/ "p1010si-post.dtsi" +/include/ "p1010rdb.dtsi" diff --git a/arch/powerpc/dts/p1010rdb-pa_36b.dts b/arch/powerpc/dts/p1010rdb-pa_36b.dts index b943de7cbb..062086a8c0 100644 --- a/arch/powerpc/dts/p1010rdb-pa_36b.dts +++ b/arch/powerpc/dts/p1010rdb-pa_36b.dts @@ -15,3 +15,4 @@ }; /include/ "p1010si-post.dtsi" +/include/ "p1010rdb.dtsi" diff --git a/arch/powerpc/dts/p1010rdb.dtsi b/arch/powerpc/dts/p1010rdb.dtsi index 4f58ee2446..f7662648e5 100644 --- a/arch/powerpc/dts/p1010rdb.dtsi +++ b/arch/powerpc/dts/p1010rdb.dtsi @@ -5,6 +5,68 @@ * Copyright 2020 NXP */ &soc { + mdio at 24000 { + phy0: ethernet-phy at 0 { + reg = <0x1>; + }; + + phy1: ethernet-phy at 1 { + reg = <0x0>; + }; + + phy2: ethernet-phy at 2 { + reg = <0x2>; + }; + + tbi-phy at 3 { + device_type = "tbi-phy"; + reg = <0x3>; + }; + }; + + mdio at 25000 { + tbi0: tbi-phy at 11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio at 26000 { + tbi1: tbi-phy at 11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + ptp_clock at b0e00 { + compatible = "fsl,etsec-ptp"; + reg = <0xb0e00 0xb0>; + interrupts = <68 2 0 0 69 2 0 0>; + fsl,tclk-period = <10>; + fsl,tmr-prsc = <2>; + fsl,tmr-add = <0x80000016>; + fsl,tmr-fiper1 = <999999990>; + fsl,tmr-fiper2 = <99990>; + fsl,max-adj = <199999999>; + }; + + enet0: ethernet at b0000 { + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet at b1000 { + phy-handle = <&phy1>; + tbi-handle = <&tbi0>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet at b2000 { + phy-handle = <&phy2>; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + }; + i2c at 3000 { rtc at 68 { compatible = "pericom,pt7c4338"; diff --git a/arch/powerpc/dts/p1010si-post.dtsi b/arch/powerpc/dts/p1010si-post.dtsi index 0289441381..f825208056 100644 --- a/arch/powerpc/dts/p1010si-post.dtsi +++ b/arch/powerpc/dts/p1010si-post.dtsi @@ -25,6 +25,31 @@ }; /include/ "pq3-i2c-0.dtsi" /include/ "pq3-i2c-1.dtsi" + +/include/ "pq3-etsec2-0.dtsi" + enet0: ethernet at b0000 { + queue-group at b0000 { + fsl,rx-bit-map = <0xff>; + fsl,tx-bit-map = <0xff>; + }; + }; + +/include/ "pq3-etsec2-1.dtsi" + enet1: ethernet at b1000 { + queue-group at b1000 { + fsl,rx-bit-map = <0xff>; + fsl,tx-bit-map = <0xff>; + }; + }; + +/include/ "pq3-etsec2-2.dtsi" + enet2: ethernet at b2000 { + queue-group at b2000 { + fsl,rx-bit-map = <0xff>; + fsl,tx-bit-map = <0xff>; + }; + + }; }; /* controller at 0x9000 */