From patchwork Sat May 30 03:24:19 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Denis 'GNUtoo' Carikli X-Patchwork-Id: 246856 List-Id: U-Boot discussion From: GNUtoo at cyberdimension.org (Denis 'GNUtoo' Carikli) Date: Sat, 30 May 2020 05:24:19 +0200 Subject: [PATCHv5][ 1/7] board: tbs2910: disable loadb and loads commands Message-ID: <20200530032425.10670-1-GNUtoo@cyberdimension.org> The loadb and loads commands are not needed for booting. There are also more reliable and faster alternatives to loadb and loads that can be used with the current configuration. As that the resulting image is already very close to the size limit, removing the loadb and loads commands shouldn't hurt. With arm-linux-gnueabi-gcc 9.2.0-1 from the Parabola GNU/Linux distribution we have the following size reduction: - text: 6733 bytes - data: 116 bytes - bss: 1172 bytes - total: 8021 bytes Signed-off-by: Denis 'GNUtoo' Carikli Acked-by: Soeren Moch --- Changelog since v4: ------------------- - Fixed Acked-by location in the commit message as requested by Soeren Moch. --- configs/tbs2910_defconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/configs/tbs2910_defconfig b/configs/tbs2910_defconfig index 2ff0e160f7..2623eb73cd 100644 --- a/configs/tbs2910_defconfig +++ b/configs/tbs2910_defconfig @@ -28,6 +28,8 @@ CONFIG_SYS_MEMTEST_START=0x10000000 CONFIG_SYS_MEMTEST_END=0x2f400000 CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_PART=y CONFIG_CMD_PCI=y