@@ -1598,7 +1598,6 @@ source "board/freescale/mpc8569mds/Kconfig"
source "board/freescale/mpc8572ds/Kconfig"
source "board/freescale/p1023rdb/Kconfig"
source "board/freescale/qemu-ppce500/Kconfig"
-source "board/gdsys/p1022/Kconfig"
source "board/keymile/Kconfig"
source "board/sbc8548/Kconfig"
source "board/socrates/Kconfig"
deleted file mode 100644
@@ -1,22 +0,0 @@
-config GDSYS_LEGACY_DRIVERS
- bool
- help
- Enable the gdsys legacy drivers under board/gdsys/common. If this
- option is not set, all relevant DM drivers must be configured for the
- device in question.
-
-if TARGET_CONTROLCENTERD
-
-config SYS_BOARD
- default "p1022"
-
-config SYS_VENDOR
- default "gdsys"
-
-config SYS_CONFIG_NAME
- default "controlcenterd"
-
-config GDSYS_LEGACY_DRIVERS
- default y
-
-endif
deleted file mode 100644
@@ -1,9 +0,0 @@
-P1022 BOARD
-M: Dirk Eibach <dirk.eibach at gdsys.cc>
-S: Maintained
-F: board/gdsys/p1022/
-F: include/configs/controlcenterd.h
-F: configs/controlcenterd_36BIT_SDCARD_defconfig
-F: configs/controlcenterd_36BIT_SDCARD_DEVELOP_defconfig
-F: configs/controlcenterd_TRAILBLAZER_defconfig
-F: configs/controlcenterd_TRAILBLAZER_DEVELOP_defconfig
deleted file mode 100644
@@ -1,10 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright 2010 Freescale Semiconductor, Inc.
-
-obj-y += law.o
-obj-y += ddr.o
-obj-y += tlb.o
-obj-y += sdhc_boot.o
-obj-$(CONFIG_CONTROLCENTERD) += controlcenterd.o controlcenterd-id.o
-obj-$(CONFIG_FSL_DIU_FB) += diu.o
deleted file mode 100644
@@ -1,1244 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2013
- * Reinhard Pfau, Guntermann & Drunck GmbH, reinhard.pfau at gdsys.cc
- */
-
-/* TODO: some more #ifdef's to avoid unneeded code for stage 1 / stage 2 */
-
-#ifdef CCDM_ID_DEBUG
-#define DEBUG
-#endif
-
-#include <common.h>
-#include <bootstage.h>
-#include <command.h>
-#include <dm.h>
-#include <env.h>
-#include <hang.h>
-#include <log.h>
-#include <malloc.h>
-#include <fs.h>
-#include <i2c.h>
-#include <mmc.h>
-#include <tpm-v1.h>
-#include <linux/delay.h>
-#include <u-boot/crc.h>
-#include <u-boot/sha1.h>
-#include <asm/byteorder.h>
-#include <asm/unaligned.h>
-#include <pca9698.h>
-
-#undef CCDM_FIRST_STAGE
-#undef CCDM_SECOND_STAGE
-#undef CCDM_AUTO_FIRST_STAGE
-
-#ifdef CONFIG_DEVELOP
-#define CCDM_DEVELOP
-#endif
-
-#ifdef CONFIG_TRAILBLAZER
-#define CCDM_FIRST_STAGE
-#undef CCDM_SECOND_STAGE
-#else
-#undef CCDM_FIRST_STAGE
-#define CCDM_SECOND_STAGE
-#endif
-
-#if defined(CCDM_DEVELOP) && defined(CCDM_SECOND_STAGE) && \
- !defined(CCCM_FIRST_STAGE)
-#define CCDM_AUTO_FIRST_STAGE
-#endif
-
-/* CCDM specific contants */
-enum {
- /* NV indices */
- NV_COMMON_DATA_INDEX = 0x40000001,
- /* magics for key blob chains */
- MAGIC_KEY_PROGRAM = 0x68726500,
- MAGIC_HMAC = 0x68616300,
- MAGIC_END_OF_CHAIN = 0x00000000,
- /* sizes */
- NV_COMMON_DATA_MIN_SIZE = 3 * sizeof(uint64_t) + 2 * sizeof(uint16_t),
-};
-
-/* other constants */
-enum {
- ESDHC_BOOT_IMAGE_SIG_OFS = 0x40,
- ESDHC_BOOT_IMAGE_SIZE_OFS = 0x48,
- ESDHC_BOOT_IMAGE_ADDR_OFS = 0x50,
- ESDHC_BOOT_IMAGE_TARGET_OFS = 0x58,
- ESDHC_BOOT_IMAGE_ENTRY_OFS = 0x60,
-};
-
-enum {
- I2C_SOC_0 = 0,
- I2C_SOC_1 = 1,
-};
-
-struct key_program {
- uint32_t magic;
- uint32_t code_crc;
- uint32_t code_size;
- uint8_t code[];
-};
-
-struct h_reg {
- bool valid;
- uint8_t digest[20];
-};
-
-
-enum access_mode {
- HREG_NONE = 0,
- HREG_RD = 1,
- HREG_WR = 2,
- HREG_RDWR = 3,
-};
-
-/* register constants */
-enum {
- FIX_HREG_DEVICE_ID_HASH = 0,
- FIX_HREG_SELF_HASH = 1,
- FIX_HREG_STAGE2_HASH = 2,
- FIX_HREG_VENDOR = 3,
- COUNT_FIX_HREGS
-};
-
-
-/* hre opcodes */
-enum {
- /* opcodes w/o data */
- HRE_NOP = 0x00,
- HRE_SYNC = HRE_NOP,
- HRE_CHECK0 = 0x01,
- /* opcodes w/o data, w/ sync dst */
- /* opcodes w/ data */
- HRE_LOAD = 0x81,
- /* opcodes w/data, w/sync dst */
- HRE_XOR = 0xC1,
- HRE_AND = 0xC2,
- HRE_OR = 0xC3,
- HRE_EXTEND = 0xC4,
- HRE_LOADKEY = 0xC5,
-};
-
-/* hre errors */
-enum {
- HRE_E_OK = 0,
- HRE_E_TPM_FAILURE,
- HRE_E_INVALID_HREG,
-};
-
-static uint64_t device_id;
-static uint64_t device_cl;
-static uint64_t device_type;
-
-static uint32_t platform_key_handle;
-
-static void(*bl2_entry)(void);
-
-static struct h_reg pcr_hregs[24];
-static struct h_reg fix_hregs[COUNT_FIX_HREGS];
-static struct h_reg var_hregs[8];
-static uint32_t hre_tpm_err;
-static int hre_err = HRE_E_OK;
-
-#define IS_PCR_HREG(spec) ((spec) & 0x20)
-#define IS_FIX_HREG(spec) (((spec) & 0x38) == 0x08)
-#define IS_VAR_HREG(spec) (((spec) & 0x38) == 0x10)
-#define HREG_IDX(spec) ((spec) & (IS_PCR_HREG(spec) ? 0x1f : 0x7))
-
-static int get_tpm(struct udevice **devp)
-{
- int rc;
-
- rc = uclass_first_device_err(UCLASS_TPM, devp);
- if (rc) {
- printf("Could not find TPM (ret=%d)\n", rc);
- return CMD_RET_FAILURE;
- }
-
- return 0;
-}
-
-static const uint8_t vendor[] = "Guntermann & Drunck";
-
-/**
- * @brief read a bunch of data from MMC into memory.
- *
- * @param mmc pointer to the mmc structure to use.
- * @param src offset where the data starts on MMC/SD device (in bytes).
- * @param dst pointer to the location where the read data should be stored.
- * @param size number of bytes to read from the MMC/SD device.
- * @return number of bytes read or -1 on error.
- */
-static int ccdm_mmc_read(struct mmc *mmc, u64 src, u8 *dst, int size)
-{
- int result = 0;
- u32 blk_len, ofs;
- ulong block_no, n, cnt;
- u8 *tmp_buf = NULL;
-
- if (size <= 0)
- goto end;
-
- blk_len = mmc->read_bl_len;
- tmp_buf = malloc(blk_len);
- if (!tmp_buf)
- goto failure;
- block_no = src / blk_len;
- ofs = src % blk_len;
-
- if (ofs) {
- n = mmc->block_dev.block_read(&mmc->block_dev, block_no++, 1,
- tmp_buf);
- if (!n)
- goto failure;
- result = min(size, (int)(blk_len - ofs));
- memcpy(dst, tmp_buf + ofs, result);
- dst += result;
- size -= result;
- }
- cnt = size / blk_len;
- if (cnt) {
- n = mmc->block_dev.block_read(&mmc->block_dev, block_no, cnt,
- dst);
- if (n != cnt)
- goto failure;
- size -= cnt * blk_len;
- result += cnt * blk_len;
- dst += cnt * blk_len;
- block_no += cnt;
- }
- if (size) {
- n = mmc->block_dev.block_read(&mmc->block_dev, block_no++, 1,
- tmp_buf);
- if (!n)
- goto failure;
- memcpy(dst, tmp_buf, size);
- result += size;
- }
- goto end;
-failure:
- result = -1;
-end:
- if (tmp_buf)
- free(tmp_buf);
- return result;
-}
-
-/**
- * @brief returns a location where the 2nd stage bootloader can be(/ is) placed.
- *
- * @return pointer to the location for/of the 2nd stage bootloader
- */
-static u8 *get_2nd_stage_bl_location(ulong target_addr)
-{
- ulong addr;
-#ifdef CCDM_SECOND_STAGE
- addr = env_get_ulong("loadaddr", 16, CONFIG_LOADADDR);
-#else
- addr = target_addr;
-#endif
- return (u8 *)(addr);
-}
-
-
-#ifdef CCDM_SECOND_STAGE
-/**
- * @brief returns a location where the image can be(/ is) placed.
- *
- * @return pointer to the location for/of the image
- */
-static u8 *get_image_location(void)
-{
- ulong addr;
- /* TODO use other area? */
- addr = env_get_ulong("loadaddr", 16, CONFIG_LOADADDR);
- return (u8 *)(addr);
-}
-#endif
-
-/**
- * @brief get the size of a given (TPM) NV area
- * @param index NV index of the area to get size for
- * @param size pointer to the size
- * @return 0 on success, != 0 on error
- */
-static int get_tpm_nv_size(struct udevice *tpm, uint32_t index, uint32_t *size)
-{
- uint32_t err;
- uint8_t info[72];
- uint8_t *ptr;
- uint16_t v16;
-
- err = tpm_get_capability(tpm, TPM_CAP_NV_INDEX, index,
- info, sizeof(info));
- if (err) {
- printf("tpm_get_capability(CAP_NV_INDEX, %08x) failed: %u\n",
- index, err);
- return 1;
- }
-
- /* skip tag and nvIndex */
- ptr = info + 6;
- /* skip 2 pcr info fields */
- v16 = get_unaligned_be16(ptr);
- ptr += 2 + v16 + 1 + 20;
- v16 = get_unaligned_be16(ptr);
- ptr += 2 + v16 + 1 + 20;
- /* skip permission and flags */
- ptr += 6 + 3;
-
- *size = get_unaligned_be32(ptr);
- return 0;
-}
-
-/**
- * @brief search for a key by usage auth and pub key hash.
- * @param auth usage auth of the key to search for
- * @param pubkey_digest (SHA1) hash of the pub key structure of the key
- * @param[out] handle the handle of the key iff found
- * @return 0 if key was found in TPM; != 0 if not.
- */
-static int find_key(struct udevice *tpm, const uint8_t auth[20],
- const uint8_t pubkey_digest[20], uint32_t *handle)
-{
- uint16_t key_count;
- uint32_t key_handles[10];
- uint8_t buf[288];
- uint8_t *ptr;
- uint32_t err;
- uint8_t digest[20];
- size_t buf_len;
- unsigned int i;
-
- /* fetch list of already loaded keys in the TPM */
- err = tpm_get_capability(tpm, TPM_CAP_HANDLE, TPM_RT_KEY, buf,
- sizeof(buf));
- if (err)
- return -1;
- key_count = get_unaligned_be16(buf);
- ptr = buf + 2;
- for (i = 0; i < key_count; ++i, ptr += 4)
- key_handles[i] = get_unaligned_be32(ptr);
-
- /* now search a(/ the) key which we can access with the given auth */
- for (i = 0; i < key_count; ++i) {
- buf_len = sizeof(buf);
- err = tpm_get_pub_key_oiap(tpm, key_handles[i], auth, buf,
- &buf_len);
- if (err && err != TPM_AUTHFAIL)
- return -1;
- if (err)
- continue;
- sha1_csum(buf, buf_len, digest);
- if (!memcmp(digest, pubkey_digest, 20)) {
- *handle = key_handles[i];
- return 0;
- }
- }
- return 1;
-}
-
-/**
- * @brief read CCDM common data from TPM NV
- * @return 0 if CCDM common data was found and read, !=0 if something failed.
- */
-static int read_common_data(struct udevice *tpm)
-{
- uint32_t size;
- uint32_t err;
- uint8_t buf[256];
- sha1_context ctx;
-
- if (get_tpm_nv_size(tpm, NV_COMMON_DATA_INDEX, &size) ||
- size < NV_COMMON_DATA_MIN_SIZE)
- return 1;
- err = tpm_nv_read_value(tpm, NV_COMMON_DATA_INDEX,
- buf, min(sizeof(buf), size));
- if (err) {
- printf("tpm_nv_read_value() failed: %u\n", err);
- return 1;
- }
-
- device_id = get_unaligned_be64(buf);
- device_cl = get_unaligned_be64(buf + 8);
- device_type = get_unaligned_be64(buf + 16);
-
- sha1_starts(&ctx);
- sha1_update(&ctx, buf, 24);
- sha1_finish(&ctx, fix_hregs[FIX_HREG_DEVICE_ID_HASH].digest);
- fix_hregs[FIX_HREG_DEVICE_ID_HASH].valid = true;
-
- platform_key_handle = get_unaligned_be32(buf + 24);
-
- return 0;
-}
-
-/**
- * @brief compute hash of bootloader itself.
- * @param[out] dst hash register where the hash should be stored
- * @return 0 on success, != 0 on failure.
- *
- * @note MUST be called at a time where the boot loader is accessible at the
- * configured location (; so take care when code is reallocated).
- */
-static int compute_self_hash(struct h_reg *dst)
-{
- sha1_csum((const uint8_t *)CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_LEN, dst->digest);
- dst->valid = true;
- return 0;
-}
-
-int ccdm_compute_self_hash(void)
-{
- if (!fix_hregs[FIX_HREG_SELF_HASH].valid)
- compute_self_hash(&fix_hregs[FIX_HREG_SELF_HASH]);
- return 0;
-}
-
-/**
- * @brief compute the hash of the 2nd stage boot loader (on SD card)
- * @param[out] dst hash register to store the computed hash
- * @return 0 on success, != 0 on failure
- *
- * Determines the size and location of the 2nd stage boot loader on SD card,
- * loads the 2nd stage boot loader and computes the (SHA1) hash value.
- * Within the 1st stage boot loader, the 2nd stage boot loader is loaded at
- * the desired memory location and the variable @a bl2_entry is set.
- *
- * @note This sets the variable @a bl2_entry to the entry point when the
- * 2nd stage boot loader is loaded at its configured memory location.
- */
-static int compute_second_stage_hash(struct h_reg *dst)
-{
- int result = 0;
- u32 code_len, code_offset, target_addr, exec_entry;
- struct mmc *mmc;
- u8 *load_addr = NULL;
- u8 buf[128];
-
- mmc = find_mmc_device(0);
- if (!mmc)
- goto failure;
- mmc_init(mmc);
-
- if (ccdm_mmc_read(mmc, 0, buf, sizeof(buf)) < 0)
- goto failure;
-
- code_offset = *(u32 *)(buf + ESDHC_BOOT_IMAGE_ADDR_OFS);
- code_len = *(u32 *)(buf + ESDHC_BOOT_IMAGE_SIZE_OFS);
- target_addr = *(u32 *)(buf + ESDHC_BOOT_IMAGE_TARGET_OFS);
- exec_entry = *(u32 *)(buf + ESDHC_BOOT_IMAGE_ENTRY_OFS);
-
- load_addr = get_2nd_stage_bl_location(target_addr);
- if (load_addr == (u8 *)target_addr)
- bl2_entry = (void(*)(void))exec_entry;
-
- if (ccdm_mmc_read(mmc, code_offset, load_addr, code_len) < 0)
- goto failure;
-
- sha1_csum(load_addr, code_len, dst->digest);
- dst->valid = true;
-
- goto end;
-failure:
- result = 1;
- bl2_entry = NULL;
-end:
- return result;
-}
-
-/**
- * @brief get pointer to hash register by specification
- * @param spec specification of a hash register
- * @return pointer to hash register or NULL if @a spec does not qualify a
- * valid hash register; NULL else.
- */
-static struct h_reg *get_hreg(uint8_t spec)
-{
- uint8_t idx;
-
- idx = HREG_IDX(spec);
- if (IS_FIX_HREG(spec)) {
- if (idx < ARRAY_SIZE(fix_hregs))
- return fix_hregs + idx;
- hre_err = HRE_E_INVALID_HREG;
- } else if (IS_PCR_HREG(spec)) {
- if (idx < ARRAY_SIZE(pcr_hregs))
- return pcr_hregs + idx;
- hre_err = HRE_E_INVALID_HREG;
- } else if (IS_VAR_HREG(spec)) {
- if (idx < ARRAY_SIZE(var_hregs))
- return var_hregs + idx;
- hre_err = HRE_E_INVALID_HREG;
- }
- return NULL;
-}
-
-/**
- * @brief get pointer of a hash register by specification and usage.
- * @param spec specification of a hash register
- * @param mode access mode (read or write or read/write)
- * @return pointer to hash register if found and valid; NULL else.
- *
- * This func uses @a get_reg() to determine the hash register for a given spec.
- * If a register is found it is validated according to the desired access mode.
- * The value of automatic registers (PCR register and fixed registers) is
- * loaded or computed on read access.
- */
-static struct h_reg *access_hreg(struct udevice *tpm, uint8_t spec,
- enum access_mode mode)
-{
- struct h_reg *result;
-
- result = get_hreg(spec);
- if (!result)
- return NULL;
-
- if (mode & HREG_WR) {
- if (IS_FIX_HREG(spec)) {
- hre_err = HRE_E_INVALID_HREG;
- return NULL;
- }
- }
- if (mode & HREG_RD) {
- if (!result->valid) {
- if (IS_PCR_HREG(spec)) {
- hre_tpm_err = tpm_pcr_read(tpm, HREG_IDX(spec),
- result->digest, 20);
- result->valid = (hre_tpm_err == TPM_SUCCESS);
- } else if (IS_FIX_HREG(spec)) {
- switch (HREG_IDX(spec)) {
- case FIX_HREG_DEVICE_ID_HASH:
- read_common_data(tpm);
- break;
- case FIX_HREG_SELF_HASH:
- ccdm_compute_self_hash();
- break;
- case FIX_HREG_STAGE2_HASH:
- compute_second_stage_hash(result);
- break;
- case FIX_HREG_VENDOR:
- memcpy(result->digest, vendor, 20);
- result->valid = true;
- break;
- }
- } else {
- result->valid = true;
- }
- }
- if (!result->valid) {
- hre_err = HRE_E_INVALID_HREG;
- return NULL;
- }
- }
-
- return result;
-}
-
-static void *compute_and(void *_dst, const void *_src, size_t n)
-{
- uint8_t *dst = _dst;
- const uint8_t *src = _src;
- size_t i;
-
- for (i = n; i-- > 0; )
- *dst++ &= *src++;
-
- return _dst;
-}
-
-static void *compute_or(void *_dst, const void *_src, size_t n)
-{
- uint8_t *dst = _dst;
- const uint8_t *src = _src;
- size_t i;
-
- for (i = n; i-- > 0; )
- *dst++ |= *src++;
-
- return _dst;
-}
-
-static void *compute_xor(void *_dst, const void *_src, size_t n)
-{
- uint8_t *dst = _dst;
- const uint8_t *src = _src;
- size_t i;
-
- for (i = n; i-- > 0; )
- *dst++ ^= *src++;
-
- return _dst;
-}
-
-static void *compute_extend(void *_dst, const void *_src, size_t n)
-{
- uint8_t digest[20];
- sha1_context ctx;
-
- sha1_starts(&ctx);
- sha1_update(&ctx, _dst, n);
- sha1_update(&ctx, _src, n);
- sha1_finish(&ctx, digest);
- memcpy(_dst, digest, min(n, sizeof(digest)));
-
- return _dst;
-}
-
-static int hre_op_loadkey(struct udevice *tpm, struct h_reg *src_reg,
- struct h_reg *dst_reg, const void *key,
- size_t key_size)
-{
- uint32_t parent_handle;
- uint32_t key_handle;
-
- if (!src_reg || !dst_reg || !src_reg->valid || !dst_reg->valid)
- return -1;
- if (find_key(tpm, src_reg->digest, dst_reg->digest, &parent_handle))
- return -1;
- hre_tpm_err = tpm_load_key2_oiap(tpm, parent_handle, key, key_size,
- src_reg->digest, &key_handle);
- if (hre_tpm_err) {
- hre_err = HRE_E_TPM_FAILURE;
- return -1;
- }
- /* TODO remember key handle somehow? */
-
- return 0;
-}
-
-/**
- * @brief executes the next opcode on the hash register engine.
- * @param[in,out] ip pointer to the opcode (instruction pointer)
- * @param[in,out] code_size (remaining) size of the code
- * @return new instruction pointer on success, NULL on error.
- */
-static const uint8_t *hre_execute_op(struct udevice *tpm, const uint8_t **ip,
- size_t *code_size)
-{
- bool dst_modified = false;
- uint32_t ins;
- uint8_t opcode;
- uint8_t src_spec;
- uint8_t dst_spec;
- uint16_t data_size;
- struct h_reg *src_reg, *dst_reg;
- uint8_t buf[20];
- const uint8_t *src_buf, *data;
- uint8_t *ptr;
- int i;
- void * (*bin_func)(void *, const void *, size_t);
-
- if (*code_size < 4)
- return NULL;
-
- ins = get_unaligned_be32(*ip);
- opcode = **ip;
- data = *ip + 4;
- src_spec = (ins >> 18) & 0x3f;
- dst_spec = (ins >> 12) & 0x3f;
- data_size = (ins & 0x7ff);
-
- debug("HRE: ins=%08x (op=%02x, s=%02x, d=%02x, L=%d)\n", ins,
- opcode, src_spec, dst_spec, data_size);
-
- if ((opcode & 0x80) && (data_size + 4) > *code_size)
- return NULL;
-
- src_reg = access_hreg(tpm, src_spec, HREG_RD);
- if (hre_err || hre_tpm_err)
- return NULL;
- dst_reg = access_hreg(tpm, dst_spec,
- (opcode & 0x40) ? HREG_RDWR : HREG_WR);
- if (hre_err || hre_tpm_err)
- return NULL;
-
- switch (opcode) {
- case HRE_NOP:
- goto end;
- case HRE_CHECK0:
- if (src_reg) {
- for (i = 0; i < 20; ++i) {
- if (src_reg->digest[i])
- return NULL;
- }
- }
- break;
- case HRE_LOAD:
- bin_func = memcpy;
- goto do_bin_func;
- case HRE_XOR:
- bin_func = compute_xor;
- goto do_bin_func;
- case HRE_AND:
- bin_func = compute_and;
- goto do_bin_func;
- case HRE_OR:
- bin_func = compute_or;
- goto do_bin_func;
- case HRE_EXTEND:
- bin_func = compute_extend;
-do_bin_func:
- if (!dst_reg)
- return NULL;
- if (src_reg) {
- src_buf = src_reg->digest;
- } else {
- if (!data_size) {
- memset(buf, 0, 20);
- src_buf = buf;
- } else if (data_size == 1) {
- memset(buf, *data, 20);
- src_buf = buf;
- } else if (data_size >= 20) {
- src_buf = data;
- } else {
- src_buf = buf;
- for (ptr = (uint8_t *)src_buf, i = 20; i > 0;
- i -= data_size, ptr += data_size)
- memcpy(ptr, data,
- min_t(size_t, i, data_size));
- }
- }
- bin_func(dst_reg->digest, src_buf, 20);
- dst_reg->valid = true;
- dst_modified = true;
- break;
- case HRE_LOADKEY:
- if (hre_op_loadkey(tpm, src_reg, dst_reg, data, data_size))
- return NULL;
- break;
- default:
- return NULL;
- }
-
- if (dst_reg && dst_modified && IS_PCR_HREG(dst_spec)) {
- hre_tpm_err = tpm_extend(tpm, HREG_IDX(dst_spec),
- dst_reg->digest, dst_reg->digest);
- if (hre_tpm_err) {
- hre_err = HRE_E_TPM_FAILURE;
- return NULL;
- }
- }
-end:
- *ip += 4;
- *code_size -= 4;
- if (opcode & 0x80) {
- *ip += data_size;
- *code_size -= data_size;
- }
-
- return *ip;
-}
-
-/**
- * @brief runs a program on the hash register engine.
- * @param code pointer to the (HRE) code.
- * @param code_size size of the code (in bytes).
- * @return 0 on success, != 0 on failure.
- */
-static int hre_run_program(struct udevice *tpm, const uint8_t *code,
- size_t code_size)
-{
- size_t code_left;
- const uint8_t *ip = code;
-
- code_left = code_size;
- hre_tpm_err = 0;
- hre_err = HRE_E_OK;
- while (code_left > 0)
- if (!hre_execute_op(tpm, &ip, &code_left))
- return -1;
-
- return hre_err;
-}
-
-static int check_hmac(struct key_program *hmac,
- const uint8_t *data, size_t data_size)
-{
- uint8_t key[20], computed_hmac[20];
- uint32_t type;
-
- type = get_unaligned_be32(hmac->code);
- if (type != 0)
- return 1;
- memset(key, 0, sizeof(key));
- compute_extend(key, pcr_hregs[1].digest, 20);
- compute_extend(key, pcr_hregs[2].digest, 20);
- compute_extend(key, pcr_hregs[3].digest, 20);
- compute_extend(key, pcr_hregs[4].digest, 20);
-
- sha1_hmac(key, sizeof(key), data, data_size, computed_hmac);
-
- return memcmp(computed_hmac, hmac->code + 4, 20);
-}
-
-static int verify_program(struct key_program *prg)
-{
- uint32_t crc;
- crc = crc32(0, prg->code, prg->code_size);
-
- if (crc != prg->code_crc) {
- printf("HRC crc mismatch: %08x != %08x\n",
- crc, prg->code_crc);
- return 1;
- }
- return 0;
-}
-
-#if defined(CCDM_FIRST_STAGE) || (defined CCDM_AUTO_FIRST_STAGE)
-static struct key_program *load_sd_key_program(void)
-{
- u32 code_len, code_offset;
- struct mmc *mmc;
- u8 buf[128];
- struct key_program *result = NULL, *hmac = NULL;
- struct key_program header;
-
- mmc = find_mmc_device(0);
- if (!mmc)
- return NULL;
- mmc_init(mmc);
-
- if (ccdm_mmc_read(mmc, 0, buf, sizeof(buf)) <= 0)
- goto failure;
-
- code_offset = *(u32 *)(buf + ESDHC_BOOT_IMAGE_ADDR_OFS);
- code_len = *(u32 *)(buf + ESDHC_BOOT_IMAGE_SIZE_OFS);
-
- code_offset += code_len;
- /* TODO: the following needs to be the size of the 2nd stage env */
- code_offset += CONFIG_ENV_SIZE;
-
- if (ccdm_mmc_read(mmc, code_offset, buf, 4*3) < 0)
- goto failure;
-
- header.magic = get_unaligned_be32(buf);
- header.code_crc = get_unaligned_be32(buf + 4);
- header.code_size = get_unaligned_be32(buf + 8);
-
- if (header.magic != MAGIC_KEY_PROGRAM)
- goto failure;
-
- result = malloc(sizeof(struct key_program) + header.code_size);
- if (!result)
- goto failure;
- *result = header;
-
- printf("load key program chunk from SD card (%u bytes) ",
- header.code_size);
- code_offset += 12;
- if (ccdm_mmc_read(mmc, code_offset, result->code, header.code_size)
- < 0)
- goto failure;
- code_offset += header.code_size;
- puts("\n");
-
- if (verify_program(result))
- goto failure;
-
- if (ccdm_mmc_read(mmc, code_offset, buf, 4*3) < 0)
- goto failure;
-
- header.magic = get_unaligned_be32(buf);
- header.code_crc = get_unaligned_be32(buf + 4);
- header.code_size = get_unaligned_be32(buf + 8);
-
- if (header.magic == MAGIC_HMAC) {
- puts("check integrity\n");
- hmac = malloc(sizeof(struct key_program) + header.code_size);
- if (!hmac)
- goto failure;
- *hmac = header;
- code_offset += 12;
- if (ccdm_mmc_read(mmc, code_offset, hmac->code,
- hmac->code_size) < 0)
- goto failure;
- if (verify_program(hmac))
- goto failure;
- if (check_hmac(hmac, result->code, result->code_size)) {
- puts("key program integrity could not be verified\n");
- goto failure;
- }
- puts("key program verified\n");
- }
-
- goto end;
-failure:
- if (result)
- free(result);
- result = NULL;
-end:
- if (hmac)
- free(hmac);
-
- return result;
-}
-#endif
-
-#ifdef CCDM_SECOND_STAGE
-/**
- * @brief load a key program from file system.
- * @param ifname interface of the file system
- * @param dev_part_str device part of the file system
- * @param fs_type tyep of the file system
- * @param path path of the file to load.
- * @return the loaded structure or NULL on failure.
- */
-static struct key_program *load_key_chunk(const char *ifname,
- const char *dev_part_str, int fs_type,
- const char *path)
-{
- struct key_program *result = NULL;
- struct key_program header;
- uint32_t crc;
- uint8_t buf[12];
- loff_t i;
-
- if (fs_set_blk_dev(ifname, dev_part_str, fs_type))
- goto failure;
- if (fs_read(path, (ulong)buf, 0, 12, &i) < 0)
- goto failure;
- if (i < 12)
- goto failure;
- header.magic = get_unaligned_be32(buf);
- header.code_crc = get_unaligned_be32(buf + 4);
- header.code_size = get_unaligned_be32(buf + 8);
-
- if (header.magic != MAGIC_HMAC && header.magic != MAGIC_KEY_PROGRAM)
- goto failure;
-
- result = malloc(sizeof(struct key_program) + header.code_size);
- if (!result)
- goto failure;
- if (fs_set_blk_dev(ifname, dev_part_str, fs_type))
- goto failure;
- if (fs_read(path, (ulong)result, 0,
- sizeof(struct key_program) + header.code_size, &i) < 0)
- goto failure;
- if (i <= 0)
- goto failure;
- *result = header;
-
- crc = crc32(0, result->code, result->code_size);
-
- if (crc != result->code_crc) {
- printf("%s: HRC crc mismatch: %08x != %08x\n",
- path, crc, result->code_crc);
- goto failure;
- }
- goto end;
-failure:
- if (result) {
- free(result);
- result = NULL;
- }
-end:
- return result;
-}
-#endif
-
-#if defined(CCDM_FIRST_STAGE) || (defined CCDM_AUTO_FIRST_STAGE)
-static const uint8_t prg_stage1_prepare[] = {
- 0x00, 0x20, 0x00, 0x00, /* opcode: SYNC f0 */
- 0x00, 0x24, 0x00, 0x00, /* opcode: SYNC f1 */
- 0x01, 0x80, 0x00, 0x00, /* opcode: CHECK0 PCR0 */
- 0x81, 0x22, 0x00, 0x00, /* opcode: LOAD PCR0, f0 */
- 0x01, 0x84, 0x00, 0x00, /* opcode: CHECK0 PCR1 */
- 0x81, 0x26, 0x10, 0x00, /* opcode: LOAD PCR1, f1 */
- 0x01, 0x88, 0x00, 0x00, /* opcode: CHECK0 PCR2 */
- 0x81, 0x2a, 0x20, 0x00, /* opcode: LOAD PCR2, f2 */
- 0x01, 0x8c, 0x00, 0x00, /* opcode: CHECK0 PCR3 */
- 0x81, 0x2e, 0x30, 0x00, /* opcode: LOAD PCR3, f3 */
-};
-
-static int first_stage_actions(struct udevice *tpm)
-{
- int result = 0;
- struct key_program *sd_prg = NULL;
-
- puts("CCDM S1: start actions\n");
-#ifndef CCDM_SECOND_STAGE
- if (tpm_continue_self_test(tpm))
- goto failure;
-#else
- tpm_continue_self_test(tpm);
-#endif
- mdelay(37);
-
- if (hre_run_program(tpm, prg_stage1_prepare,
- sizeof(prg_stage1_prepare)))
- goto failure;
-
- sd_prg = load_sd_key_program();
- if (sd_prg) {
- if (hre_run_program(tpm, sd_prg->code, sd_prg->code_size))
- goto failure;
- puts("SD code run successfully\n");
- } else {
- puts("no key program found on SD\n");
- goto failure;
- }
- goto end;
-failure:
- result = 1;
-end:
- if (sd_prg)
- free(sd_prg);
- printf("CCDM S1: actions done (%d)\n", result);
- return result;
-}
-#endif
-
-#ifdef CCDM_FIRST_STAGE
-static int first_stage_init(void)
-{
- struct udevice *tpm;
- int ret;
-
- puts("CCDM S1\n");
- ret = get_tpm(&tpm);
- if (ret || tpm_init(tpm) || tpm_startup(tpm, TPM_ST_CLEAR))
- return 1;
- ret = first_stage_actions(tpm);
-#ifndef CCDM_SECOND_STAGE
- if (!ret) {
- if (bl2_entry)
- (*bl2_entry)();
- ret = 1;
- }
-#endif
- return ret;
-}
-#endif
-
-#ifdef CCDM_SECOND_STAGE
-static const uint8_t prg_stage2_prepare[] = {
- 0x00, 0x80, 0x00, 0x00, /* opcode: SYNC PCR0 */
- 0x00, 0x84, 0x00, 0x00, /* opcode: SYNC PCR1 */
- 0x00, 0x88, 0x00, 0x00, /* opcode: SYNC PCR2 */
- 0x00, 0x8c, 0x00, 0x00, /* opcode: SYNC PCR3 */
- 0x00, 0x90, 0x00, 0x00, /* opcode: SYNC PCR4 */
-};
-
-static const uint8_t prg_stage2_success[] = {
- 0x81, 0x02, 0x40, 0x14, /* opcode: LOAD PCR4, #<20B data> */
- 0x48, 0xfd, 0x95, 0x17, 0xe7, 0x54, 0x6b, 0x68, /* data */
- 0x92, 0x31, 0x18, 0x05, 0xf8, 0x58, 0x58, 0x3c, /* data */
- 0xe4, 0xd2, 0x81, 0xe0, /* data */
-};
-
-static const uint8_t prg_stage_fail[] = {
- 0x81, 0x01, 0x00, 0x14, /* opcode: LOAD v0, #<20B data> */
- 0xc0, 0x32, 0xad, 0xc1, 0xff, 0x62, 0x9c, 0x9b, /* data */
- 0x66, 0xf2, 0x27, 0x49, 0xad, 0x66, 0x7e, 0x6b, /* data */
- 0xea, 0xdf, 0x14, 0x4b, /* data */
- 0x81, 0x42, 0x30, 0x00, /* opcode: LOAD PCR3, v0 */
- 0x81, 0x42, 0x40, 0x00, /* opcode: LOAD PCR4, v0 */
-};
-
-static int second_stage_init(void)
-{
- static const char mac_suffix[] = ".mac";
- bool did_first_stage_run = true;
- int result = 0;
- char *cptr, *mmcdev = NULL;
- struct key_program *hmac_blob = NULL;
- const char *image_path = "/ccdm.itb";
- char *mac_path = NULL;
- ulong image_addr;
- loff_t image_size;
- struct udevice *tpm;
- uint32_t err;
- int ret;
-
- printf("CCDM S2\n");
- ret = get_tpm(&tpm);
- if (ret || tpm_init(tpm))
- return 1;
- err = tpm_startup(tpm, TPM_ST_CLEAR);
- if (err != TPM_INVALID_POSTINIT)
- did_first_stage_run = false;
-
-#ifdef CCDM_AUTO_FIRST_STAGE
- if (!did_first_stage_run && first_stage_actions(tpm))
- goto failure;
-#else
- if (!did_first_stage_run)
- goto failure;
-#endif
-
- if (hre_run_program(tpm, prg_stage2_prepare,
- sizeof(prg_stage2_prepare)))
- goto failure;
-
- /* run "prepboot" from env to get "mmcdev" set */
- cptr = env_get("prepboot");
- if (cptr && !run_command(cptr, 0))
- mmcdev = env_get("mmcdev");
- if (!mmcdev)
- goto failure;
-
- cptr = env_get("ramdiskimage");
- if (cptr)
- image_path = cptr;
-
- mac_path = malloc(strlen(image_path) + strlen(mac_suffix) + 1);
- if (mac_path == NULL)
- goto failure;
- strcpy(mac_path, image_path);
- strcat(mac_path, mac_suffix);
-
- /* read image from mmcdev (ccdm.itb) */
- image_addr = (ulong)get_image_location();
- if (fs_set_blk_dev("mmc", mmcdev, FS_TYPE_EXT))
- goto failure;
- if (fs_read(image_path, image_addr, 0, 0, &image_size) < 0)
- goto failure;
- if (image_size <= 0)
- goto failure;
- printf("CCDM image found on %s, %lld bytes\n", mmcdev, image_size);
-
- hmac_blob = load_key_chunk("mmc", mmcdev, FS_TYPE_EXT, mac_path);
- if (!hmac_blob) {
- puts("failed to load mac file\n");
- goto failure;
- }
- if (verify_program(hmac_blob)) {
- puts("corrupted mac file\n");
- goto failure;
- }
- if (check_hmac(hmac_blob, (u8 *)image_addr, image_size)) {
- puts("image integrity could not be verified\n");
- goto failure;
- }
- puts("CCDM image OK\n");
-
- hre_run_program(tpm, prg_stage2_success, sizeof(prg_stage2_success));
-
- goto end;
-failure:
- result = 1;
- hre_run_program(tpm, prg_stage_fail, sizeof(prg_stage_fail));
-end:
- if (hmac_blob)
- free(hmac_blob);
- if (mac_path)
- free(mac_path);
-
- return result;
-}
-#endif
-
-int show_self_hash(void)
-{
- struct h_reg *hash_ptr;
-#ifdef CCDM_SECOND_STAGE
- struct h_reg hash;
-
- hash_ptr = &hash;
- if (compute_self_hash(hash_ptr))
- return 1;
-#else
- hash_ptr = &fix_hregs[FIX_HREG_SELF_HASH];
-#endif
- puts("self hash: ");
- if (hash_ptr && hash_ptr->valid)
- print_buffer(0, hash_ptr->digest, 1, 20, 20);
- else
- puts("INVALID\n");
-
- return 0;
-}
-
-/**
- * @brief let the system hang.
- *
- * Called on error.
- * Will stop the boot process; display a message and signal the error condition
- * by blinking the "status" and the "finder" LED of the controller board.
- *
- * @note the develop version runs the blink cycle 2 times and then returns.
- * The release version never returns.
- */
-static void ccdm_hang(void)
-{
- static const u64 f0 = 0x0ba3bb8ba2e880; /* blink code "finder" LED */
- static const u64 s0 = 0x00f0f0f0f0f0f0; /* blink code "status" LED */
- u64 f, s;
- int i;
-#ifdef CCDM_DEVELOP
- int j;
-#endif
-
- I2C_SET_BUS(I2C_SOC_0);
- pca9698_direction_output(0x22, 0, 0); /* Finder */
- pca9698_direction_output(0x22, 4, 0); /* Status */
-
- puts("### ERROR ### Please RESET the board ###\n");
- bootstage_error(BOOTSTAGE_ID_NEED_RESET);
-#ifdef CCDM_DEVELOP
- puts("*** ERROR ******** THIS WOULD HANG ******** ERROR ***\n");
- puts("** but we continue since this is a DEVELOP version **\n");
- puts("*** ERROR ******** THIS WOULD HANG ******** ERROR ***\n");
- for (j = 2; j-- > 0;) {
- putc('#');
-#else
- for (;;) {
-#endif
- f = f0;
- s = s0;
- for (i = 54; i-- > 0;) {
- pca9698_set_value(0x22, 0, !(f & 1));
- pca9698_set_value(0x22, 4, (s & 1));
- f >>= 1;
- s >>= 1;
- mdelay(120);
- }
- }
- puts("\ncontinue...\n");
-}
-
-int startup_ccdm_id_module(void)
-{
- int result = 0;
- unsigned int orig_i2c_bus;
-
- orig_i2c_bus = i2c_get_bus_num();
- i2c_set_bus_num(I2C_SOC_1);
-
- /* goto end; */
-
-#ifdef CCDM_DEVELOP
- show_self_hash();
-#endif
-#ifdef CCDM_FIRST_STAGE
- result = first_stage_init();
- if (result) {
- puts("1st stage init failed\n");
- goto failure;
- }
-#endif
-#ifdef CCDM_SECOND_STAGE
- result = second_stage_init();
- if (result) {
- puts("2nd stage init failed\n");
- goto failure;
- }
-#endif
-
- goto end;
-failure:
- result = 1;
-end:
- i2c_set_bus_num(orig_i2c_bus);
- if (result)
- ccdm_hang();
-
- return result;
-}
deleted file mode 100644
@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2013
- * Reinhard Pfau, Guntermann & Drunck GmbH, reinhard.pfau at gdsys.cc
- */
-
-#ifndef __CONTROLCENTER_ID_H
-#define __CONTROLCENTER_ID_H
-
-int ccdm_compute_self_hash(void);
-int startup_ccdm_id_module(void);
-
-int show_self_hash(void);
-
-#endif /* __CONTROLCENTER_ID_H */
deleted file mode 100644
@@ -1,431 +0,0 @@
-/*
- * (C) Copyright 2013
- * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach at gdsys.cc
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <env.h>
-#include <image.h>
-#include <init.h>
-#include <net.h>
-#include <pci.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/cache.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_pci.h>
-#include <fsl_ddr_sdram.h>
-#include <asm/fsl_serdes.h>
-#include <asm/io.h>
-#include <linux/delay.h>
-#include <linux/libfdt.h>
-#include <fdt_support.h>
-#include <fsl_mdio.h>
-#include <tsec.h>
-#include <asm/fsl_law.h>
-#include <netdev.h>
-#include <i2c.h>
-#include <pca9698.h>
-#include <watchdog.h>
-#include "../common/dp501.h"
-#include "controlcenterd-id.h"
-
-enum {
- HWVER_100 = 0,
- HWVER_110 = 1,
- HWVER_120 = 2,
-};
-
-struct ihs_fpga {
- u32 reflection_low; /* 0x0000 */
- u32 versions; /* 0x0004 */
- u32 fpga_version; /* 0x0008 */
- u32 fpga_features; /* 0x000c */
- u32 reserved[4]; /* 0x0010 */
- u32 control; /* 0x0020 */
-};
-
-#ifndef CONFIG_TRAILBLAZER
-static struct pci_device_id hydra_supported[] = {
- { 0x6d5e, 0xcdc0 },
- {}
-};
-
-static void hydra_initialize(void);
-#endif
-
-int board_early_init_f(void)
-{
- ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
- ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO3_ADDR);
-
- /* Reset eLBC_DIU and SPI_eLBC in case we are booting from SD */
- clrsetbits_be32(&gur->pmuxcr, 0x00600000, 0x80000000);
-
- /* Set pmuxcr to allow both i2c1 and i2c2 */
- setbits_be32(&gur->pmuxcr, 0x00001000);
-
- /* Set pmuxcr to enable GPIO 3_11-3_13 */
- setbits_be32(&gur->pmuxcr, 0x00000010);
-
- /* Set pmuxcr to enable GPIO 2_31,3_9+10 */
- setbits_be32(&gur->pmuxcr, 0x00000020);
-
- /* Set pmuxcr to enable GPIO 2_28-2_30 */
- setbits_be32(&gur->pmuxcr, 0x000000c0);
-
- /* Set pmuxcr to enable GPIO 3_20-3_22 */
- setbits_be32(&gur->pmuxcr2, 0x03000000);
-
- /* Set pmuxcr to enable IRQ0-2 */
- clrbits_be32(&gur->pmuxcr, 0x00000300);
-
- /* Set pmuxcr to disable IRQ3-11 */
- setbits_be32(&gur->pmuxcr, 0x000000F0);
-
- /* Read back the register to synchronize the write. */
- in_be32(&gur->pmuxcr);
-
- /* Set the pin muxing to enable ETSEC2. */
- clrbits_be32(&gur->pmuxcr2, 0x001F8000);
-
-#ifdef CONFIG_TRAILBLAZER
- /*
- * GPIO3_10 SPERRTRIGGER
- */
- setbits_be32(&pgpio->gpdir, 0x00200000);
- clrbits_be32(&pgpio->gpdat, 0x00200000);
- udelay(100);
- setbits_be32(&pgpio->gpdat, 0x00200000);
- udelay(100);
- clrbits_be32(&pgpio->gpdat, 0x00200000);
-#endif
-
- /*
- * GPIO3_11 CPU-TO-FPGA-RESET#
- */
- setbits_be32(&pgpio->gpdir, 0x00100000);
- clrbits_be32(&pgpio->gpdat, 0x00100000);
-
- /*
- * GPIO3_21 CPU-STATUS-WATCHDOG-TRIGGER#
- */
- setbits_be32(&pgpio->gpdir, 0x00000400);
-
- return 0;
-}
-
-int checkboard(void)
-{
- printf("Board: ControlCenter DIGITAL\n");
-
- return 0;
-}
-
-int misc_init_r(void)
-{
- return 0;
-}
-
-/*
- * A list of PCI and SATA slots
- */
-enum slot_id {
- SLOT_PCIE1 = 1,
- SLOT_PCIE2,
- SLOT_PCIE3,
- SLOT_PCIE4,
- SLOT_PCIE5,
- SLOT_SATA1,
- SLOT_SATA2
-};
-
-/*
- * This array maps the slot identifiers to their names on the P1022DS board.
- */
-static const char * const slot_names[] = {
- [SLOT_PCIE1] = "Slot 1",
- [SLOT_PCIE2] = "Slot 2",
- [SLOT_PCIE3] = "Slot 3",
- [SLOT_PCIE4] = "Slot 4",
- [SLOT_PCIE5] = "Mini-PCIe",
- [SLOT_SATA1] = "SATA 1",
- [SLOT_SATA2] = "SATA 2",
-};
-
-/*
- * This array maps a given SERDES configuration and SERDES device to the PCI or
- * SATA slot that it connects to. This mapping is hard-coded in the FPGA.
- */
-static u8 serdes_dev_slot[][SATA2 + 1] = {
- [0x01] = { [PCIE3] = SLOT_PCIE4, [PCIE2] = SLOT_PCIE5 },
- [0x02] = { [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
- [0x09] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE4,
- [PCIE2] = SLOT_PCIE5 },
- [0x16] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE2,
- [PCIE2] = SLOT_PCIE3,
- [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
- [0x17] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE2,
- [PCIE2] = SLOT_PCIE3 },
- [0x1a] = { [PCIE1] = SLOT_PCIE1, [PCIE2] = SLOT_PCIE3,
- [PCIE2] = SLOT_PCIE3,
- [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
- [0x1c] = { [PCIE1] = SLOT_PCIE1,
- [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
- [0x1e] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE3 },
- [0x1f] = { [PCIE1] = SLOT_PCIE1 },
-};
-
-
-/*
- * Returns the name of the slot to which the PCIe or SATA controller is
- * connected
- */
-const char *board_serdes_name(enum srds_prtcl device)
-{
- ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
- u32 pordevsr = in_be32(&gur->pordevsr);
- unsigned int srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
- MPC85xx_PORDEVSR_IO_SEL_SHIFT;
- enum slot_id slot = serdes_dev_slot[srds_cfg][device];
- const char *name = slot_names[slot];
-
- if (name)
- return name;
- else
- return "Nothing";
-}
-
-void hw_watchdog_reset(void)
-{
- ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO3_ADDR);
-
- clrbits_be32(&pgpio->gpdat, 0x00000400);
- setbits_be32(&pgpio->gpdat, 0x00000400);
-}
-
-#ifdef CONFIG_TRAILBLAZER
-int do_bootd(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
-{
- return run_command(env_get("bootcmd"), flag);
-}
-
-int board_early_init_r(void)
-{
- ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO3_ADDR);
-
- /*
- * GPIO3_12 PPC_SYSTEMREADY#
- */
- setbits_be32(&pgpio->gpdir, 0x00080000);
- setbits_be32(&pgpio->gpodr, 0x00080000);
- clrbits_be32(&pgpio->gpdat, 0x00080000);
-
- return ccdm_compute_self_hash();
-}
-
-int last_stage_init(void)
-{
- startup_ccdm_id_module();
- return 0;
-}
-
-#else
-void pci_init_board(void)
-{
- fsl_pcie_init_board(0);
-
- hydra_initialize();
-}
-
-int board_early_init_r(void)
-{
- unsigned int k = 0;
- ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO3_ADDR);
-
- /* wait for FPGA configuration to finish */
- while (!pca9698_get_value(0x22, 11) && (k++ < 30))
- udelay(100000);
-
- if (k > 30) {
- puts("FPGA configuration timed out.\n");
- } else {
- /* clear FPGA reset */
- udelay(1000);
- setbits_be32(&pgpio->gpdat, 0x00100000);
- }
-
- /* give time for PCIe link training */
- udelay(100000);
-
- /*
- * GPIO3_12 PPC_SYSTEMREADY#
- */
- setbits_be32(&pgpio->gpdir, 0x00080000);
- setbits_be32(&pgpio->gpodr, 0x00080000);
- clrbits_be32(&pgpio->gpdat, 0x00080000);
-
- return 0;
-}
-
-int last_stage_init(void)
-{
- /* Turn on Parade DP501 */
- pca9698_direction_output(0x22, 7, 1);
- udelay(500000);
-
- dp501_powerup(0x08);
-
- startup_ccdm_id_module();
-
- return 0;
-}
-
-/*
- * Initialize on-board and/or PCI Ethernet devices
- *
- * Returns:
- * <0, error
- * 0, no ethernet devices found
- * >0, number of ethernet devices initialized
- */
-int board_eth_init(bd_t *bis)
-{
- struct fsl_pq_mdio_info mdio_info;
- struct tsec_info_struct tsec_info[2];
- unsigned int num = 0;
-
-#ifdef CONFIG_TSEC1
- SET_STD_TSEC_INFO(tsec_info[num], 1);
- num++;
-#endif
-#ifdef CONFIG_TSEC2
- SET_STD_TSEC_INFO(tsec_info[num], 2);
- num++;
-#endif
-
- mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
- mdio_info.name = DEFAULT_MII_NAME;
- fsl_pq_mdio_init(bis, &mdio_info);
-
- return tsec_eth_init(bis, tsec_info, num) + pci_eth_init(bis);
-}
-
-#ifdef CONFIG_OF_BOARD_SETUP
-int ft_board_setup(void *blob, bd_t *bd)
-{
- phys_addr_t base;
- phys_size_t size;
-
- ft_cpu_setup(blob, bd);
-
- base = env_get_bootm_low();
- size = env_get_bootm_size();
-
- fdt_fixup_memory(blob, (u64)base, (u64)size);
-
-#ifdef CONFIG_HAS_FSL_DR_USB
- fsl_fdt_fixup_dr_usb(blob, bd);
-#endif
-
- FT_FSL_PCI_SETUP;
-
- return 0;
-}
-#endif
-
-static void hydra_initialize(void)
-{
- unsigned int i;
- pci_dev_t devno;
-
- /* Find and probe all the matching PCI devices */
- for (i = 0; (devno = pci_find_devices(hydra_supported, i)) >= 0; i++) {
- u32 val;
- struct ihs_fpga *fpga;
- u32 versions;
- u32 fpga_version;
- u32 fpga_features;
-
- unsigned hardware_version;
- unsigned feature_uart_channels;
- unsigned feature_sb_channels;
-
- /* Try to enable I/O accesses and bus-mastering */
- val = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
- pci_write_config_dword(devno, PCI_COMMAND, val);
-
- /* Make sure it worked */
- pci_read_config_dword(devno, PCI_COMMAND, &val);
- if (!(val & PCI_COMMAND_MEMORY)) {
- puts("Can't enable I/O memory\n");
- continue;
- }
- if (!(val & PCI_COMMAND_MASTER)) {
- puts("Can't enable bus-mastering\n");
- continue;
- }
-
- /* read FPGA details */
- fpga = pci_map_bar(devno, PCI_BASE_ADDRESS_0,
- PCI_REGION_MEM);
-
- /* disable sideband clocks */
- writel(1, &fpga->control);
-
- versions = readl(&fpga->versions);
- fpga_version = readl(&fpga->fpga_version);
- fpga_features = readl(&fpga->fpga_features);
-
- hardware_version = versions & 0xf;
- feature_uart_channels = (fpga_features >> 6) & 0x1f;
- feature_sb_channels = fpga_features & 0x1f;
-
- printf("FPGA%d: ", i);
-
- switch (hardware_version) {
- case HWVER_100:
- printf("HW-Ver 1.00\n");
- break;
-
- case HWVER_110:
- printf("HW-Ver 1.10\n");
- break;
-
- case HWVER_120:
- printf("HW-Ver 1.20\n");
- break;
-
- default:
- printf("HW-Ver %d(not supported)\n",
- hardware_version);
- break;
- }
-
- printf(" FPGA V %d.%02d, features:",
- fpga_version / 100, fpga_version % 100);
-
- printf(" %d uart channel(s)", feature_uart_channels);
- printf(" %d sideband channel(s)\n", feature_sb_channels);
- }
-}
-#endif
deleted file mode 100644
@@ -1,68 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2010 Freescale Semiconductor, Inc.
- * Authors: Srikanth Srinivasan <srikanth.srinivasan at freescale.com>
- * Timur Tabi <timur at freescale.com>
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <log.h>
-
-#include <fsl_ddr_sdram.h>
-#include <fsl_ddr_dimm_params.h>
-
-void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm,
- unsigned int ctrl_num)
-{
- unsigned int i;
-
- if (ctrl_num) {
- printf("Wrong parameter for controller number %d", ctrl_num);
- return;
- }
- if (!pdimm->n_ranks)
- return;
-
- /* set odt_rd_cfg and odt_wr_cfg. */
- for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- popts->cs_local_opts[i].odt_rd_cfg = 0;
- popts->cs_local_opts[i].odt_wr_cfg = 1;
- }
-
- popts->clk_adjust = 5;
- popts->cpo_override = 0x1f;
- popts->write_data_delay = 2;
- popts->half_strength_driver_enable = 1;
-
- /* Per AN4039, enable ZQ calibration. */
- popts->zq_en = 1;
-}
-
-#ifdef CONFIG_SPD_EEPROM
-/*
- * we only have a "fake" SPD-EEPROM here, which has 16 bit addresses
- */
-void get_spd(generic_spd_eeprom_t *spd, u8 i2c_address)
-{
- int ret = i2c_read(i2c_address, 0, 2, (uchar *)spd,
- sizeof(generic_spd_eeprom_t));
-
- if (ret) {
- if (i2c_address ==
-#ifdef SPD_EEPROM_ADDRESS
- SPD_EEPROM_ADDRESS
-#elif defined(SPD_EEPROM_ADDRESS1)
- SPD_EEPROM_ADDRESS1
-#endif
- ) {
- printf("DDR: failed to read SPD from address %u\n",
- i2c_address);
- } else {
- debug("DDR: failed to read SPD from address %u\n",
- i2c_address);
- }
- memset(spd, 0, sizeof(generic_spd_eeprom_t));
- }
-}
-#endif
deleted file mode 100644
@@ -1,85 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2010-2011 Freescale Semiconductor, Inc.
- * Authors: Timur Tabi <timur at freescale.com>
- *
- * FSL DIU Framebuffer driver
- */
-
-#include <common.h>
-#include <clock_legacy.h>
-#include <command.h>
-#include <log.h>
-#include <linux/ctype.h>
-#include <asm/io.h>
-#include <stdio_dev.h>
-#include <video_fb.h>
-#include <fsl_diu_fb.h>
-
-#define PMUXCR_ELBCDIU_MASK 0xc0000000
-#define PMUXCR_ELBCDIU_NOR16 0x80000000
-#define PMUXCR_ELBCDIU_DIU 0x40000000
-
-/*
- * DIU Area Descriptor
- *
- * Note that we need to byte-swap the value before it's written to the AD
- * register. So even though the registers don't look like they're in the same
- * bit positions as they are on the MPC8610, the same value is written to the
- * AD register on the MPC8610 and on the P1022.
- */
-#define AD_BYTE_F 0x10000000
-#define AD_ALPHA_C_SHIFT 25
-#define AD_BLUE_C_SHIFT 23
-#define AD_GREEN_C_SHIFT 21
-#define AD_RED_C_SHIFT 19
-#define AD_PIXEL_S_SHIFT 16
-#define AD_COMP_3_SHIFT 12
-#define AD_COMP_2_SHIFT 8
-#define AD_COMP_1_SHIFT 4
-#define AD_COMP_0_SHIFT 0
-
-/*
- * Variables used by the DIU/LBC switching code. It's safe to makes these
- * global, because the DIU requires DDR, so we'll only run this code after
- * relocation.
- */
-static u32 pmuxcr;
-
-void diu_set_pixel_clock(unsigned int pixclock)
-{
- ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- unsigned long speed_ccb, temp;
- u32 pixval;
-
- speed_ccb = get_bus_freq(0);
- temp = 1000000000 / pixclock;
- temp *= 1000;
- pixval = speed_ccb / temp;
- debug("DIU pixval = %u\n", pixval);
-
- /* Modify PXCLK in GUTS CLKDVDR */
- temp = in_be32(&gur->clkdvdr) & 0x2000FFFF;
- out_be32(&gur->clkdvdr, temp); /* turn off clock */
- out_be32(&gur->clkdvdr, temp | 0x80000000 | ((pixval & 0x1F) << 16));
-}
-
-int platform_diu_init(unsigned int xres, unsigned int yres, const char *port)
-{
- ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- u32 pixel_format;
-
- pixel_format = cpu_to_le32(AD_BYTE_F | (3 << AD_ALPHA_C_SHIFT) |
- (0 << AD_BLUE_C_SHIFT) | (1 << AD_GREEN_C_SHIFT) |
- (2 << AD_RED_C_SHIFT) | (8 << AD_COMP_3_SHIFT) |
- (8 << AD_COMP_2_SHIFT) | (8 << AD_COMP_1_SHIFT) |
- (8 << AD_COMP_0_SHIFT) | (3 << AD_PIXEL_S_SHIFT));
-
- printf("DIU: Switching to %ux%u\n", xres, yres);
-
- /* Set PMUXCR to switch the muxed pins from the LBC to the DIU */
- clrsetbits_be32(&gur->pmuxcr, PMUXCR_ELBCDIU_MASK, PMUXCR_ELBCDIU_DIU);
- pmuxcr = in_be32(&gur->pmuxcr);
-
- return fsl_diu_init(xres, yres, pixel_format, 0);
-}
deleted file mode 100644
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2010 Freescale Semiconductor, Inc.
- * Authors: Srikanth Srinivasan <srikanth.srinivasan at freescale.com>
- * Timur Tabi <timur at freescale.com>
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <asm/mmu.h>
-
-struct law_entry law_table[] = {
- SET_LAW(CONFIG_SYS_ELBC_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
-};
-
-int num_law_entries = ARRAY_SIZE(law_table);
deleted file mode 100644
@@ -1,63 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mmc.h>
-#include <malloc.h>
-
-/*
- * The environment variables are written to just after the u-boot image
- * on SDCard, so we must read the MBR to get the start address and code
- * length of the u-boot image, then calculate the address of the env.
- */
-#define ESDHC_BOOT_IMAGE_SIZE 0x48
-#define ESDHC_BOOT_IMAGE_ADDR 0x50
-
-int mmc_get_env_addr(struct mmc *mmc, int copy, u32 *env_addr)
-{
- u8 *tmp_buf;
- u32 blklen, code_offset, code_len, n;
-
- blklen = mmc->read_bl_len;
- tmp_buf = malloc(blklen);
- if (!tmp_buf)
- return 1;
-
- /* read out the first block, get the config data information */
- n = mmc->block_dev.block_read(&mmc->block_dev, 0, 1, tmp_buf);
- if (!n) {
- free(tmp_buf);
- return 1;
- }
-
- /* Get the Source Address, from offset 0x50 */
- code_offset = *(u32 *)(tmp_buf + ESDHC_BOOT_IMAGE_ADDR);
-
- /* Get the code size from offset 0x48 */
- code_len = *(u32 *)(tmp_buf + ESDHC_BOOT_IMAGE_SIZE);
-
- *env_addr = code_offset + code_len;
-
- free(tmp_buf);
-
- return 0;
-}
deleted file mode 100644
@@ -1,73 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2010 Freescale Semiconductor, Inc.
- * Authors: Srikanth Srinivasan <srikanth.srinivasan at freescale.com>
- * Timur Tabi <timur at freescale.com>
- */
-
-#include <common.h>
-#include <asm/mmu.h>
-
-struct fsl_e_tlb_entry tlb_table[] = {
- /* TLB 0 - for temp stack in cache */
- SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 0, BOOKE_PAGESZ_4K, 0),
- SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
- CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 0, BOOKE_PAGESZ_4K, 0),
- SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
- CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 0, BOOKE_PAGESZ_4K, 0),
- SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
- CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 0, BOOKE_PAGESZ_4K, 0),
-
- /* TLB 1 */
- /* *I*** - Covers boot page */
- SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I,
- 0, 0, BOOKE_PAGESZ_4K, 1),
-
- /* *I*G* - CCSRBAR */
- SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 1, BOOKE_PAGESZ_1M, 1),
-
- /* *I*G* - eLBC */
- SET_TLB_ENTRY(1, CONFIG_SYS_ELBC_BASE, CONFIG_SYS_ELBC_BASE_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 2, BOOKE_PAGESZ_1M, 1),
-
-#if defined(CONFIG_TRAILBLAZER)
- /* *I*G - L2SRAM */
- SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 9, BOOKE_PAGESZ_256K, 1),
-#else
- /* *I*G* - PCI */
- SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 3, BOOKE_PAGESZ_256M, 1),
- SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x10000000,
- CONFIG_SYS_PCIE1_MEM_PHYS + 0x10000000,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 4, BOOKE_PAGESZ_256M, 1),
-
- /* *I*G* - PCI I/O */
- SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 5, BOOKE_PAGESZ_256K, 1),
-
-#ifdef CONFIG_SYS_RAMBOOT
- SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
- 0, 6, BOOKE_PAGESZ_1G, 1),
-#endif
-#endif
-};
-
-int num_tlb_entries = ARRAY_SIZE(tlb_table);
deleted file mode 100644
@@ -1,68 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x0
-CONFIG_IDENT_STRING=" controlcenterd 0.01"
-CONFIG_MPC85xx=y
-CONFIG_TARGET_CONTROLCENTERD=y
-CONFIG_PHYS_64BIT=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SDCARD,DEVELOP"
-CONFIG_BOOTDELAY=10
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_LAST_STAGE_INIT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_REGINFO=y
-CONFIG_CMD_EEPROM=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_SATA=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_BMP=y
-CONFIG_MP=y
-# CONFIG_CMD_HASH is not set
-CONFIG_CMD_TPM=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
-CONFIG_FSL_SATA=y
-CONFIG_FSL_ESDHC=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_CONS_INDEX=2
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_TPM_AUTH_SESSIONS=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
-CONFIG_TPM=y
-CONFIG_OF_LIBFDT=y
deleted file mode 100644
@@ -1,68 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x0
-CONFIG_IDENT_STRING=" controlcenterd 0.01"
-CONFIG_MPC85xx=y
-CONFIG_TARGET_CONTROLCENTERD=y
-CONFIG_PHYS_64BIT=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SDCARD"
-CONFIG_BOOTDELAY=10
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_LAST_STAGE_INIT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_REGINFO=y
-CONFIG_CMD_EEPROM=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_SATA=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_BMP=y
-CONFIG_MP=y
-# CONFIG_CMD_HASH is not set
-CONFIG_CMD_TPM=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
-CONFIG_FSL_SATA=y
-CONFIG_FSL_ESDHC=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_CONS_INDEX=2
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_TPM_AUTH_SESSIONS=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
-CONFIG_TPM=y
-CONFIG_OF_LIBFDT=y
deleted file mode 100644
@@ -1,36 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xf8fc0000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_IDENT_STRING=" controlcenterd trailblazer 0.01"
-CONFIG_MPC85xx=y
-# CONFIG_CMD_ERRATA is not set
-CONFIG_TARGET_CONTROLCENTERD=y
-CONFIG_SYS_EXTRA_OPTIONS="TRAILBLAZER,SPIFLASH,DEVELOP"
-CONFIG_BOOTDELAY=-2
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-# CONFIG_MISC_INIT_R is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_LAST_STAGE_INIT=y
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-# CONFIG_SYS_LONGHELP is not set
-# CONFIG_CMD_BOOTM is not set
-CONFIG_CMD_EEPROM=y
-CONFIG_CMD_MMC=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_MP=y
-# CONFIG_CMD_HASH is not set
-CONFIG_CMD_TPM=y
-# CONFIG_CMD_IRQ is not set
-CONFIG_DOS_PARTITION=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
-CONFIG_FSL_ESDHC=y
-# CONFIG_PCI is not set
-CONFIG_CONS_INDEX=2
-CONFIG_SYS_NS16550=y
-CONFIG_TPM_AUTH_SESSIONS=y
-CONFIG_TPM=y
-CONFIG_SHA1=y
deleted file mode 100644
@@ -1,36 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xf8fc0000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_IDENT_STRING=" controlcenterd trailblazer 0.01"
-CONFIG_MPC85xx=y
-# CONFIG_CMD_ERRATA is not set
-CONFIG_TARGET_CONTROLCENTERD=y
-CONFIG_SYS_EXTRA_OPTIONS="TRAILBLAZER,SPIFLASH"
-CONFIG_BOOTDELAY=-2
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-# CONFIG_MISC_INIT_R is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_LAST_STAGE_INIT=y
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-# CONFIG_SYS_LONGHELP is not set
-# CONFIG_CMD_BOOTM is not set
-CONFIG_CMD_EEPROM=y
-CONFIG_CMD_MMC=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_MP=y
-# CONFIG_CMD_HASH is not set
-CONFIG_CMD_TPM=y
-# CONFIG_CMD_IRQ is not set
-CONFIG_DOS_PARTITION=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
-CONFIG_FSL_ESDHC=y
-# CONFIG_PCI is not set
-CONFIG_CONS_INDEX=2
-CONFIG_SYS_NS16550=y
-CONFIG_TPM_AUTH_SESSIONS=y
-CONFIG_TPM=y
-CONFIG_SHA1=y
deleted file mode 100644
@@ -1,362 +0,0 @@
-/*
- * (C) Copyright 2013
- * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach at gdsys.cc
- *
- * based on P1022DS.h
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <linux/stringify.h>
-
-#ifdef CONFIG_SDCARD
-#define CONFIG_RAMBOOT_SDCARD
-#endif
-
-#ifdef CONFIG_SPIFLASH
-#define CONFIG_RAMBOOT_SPIFLASH
-#endif
-
-/* High Level Configuration Options */
-#define CONFIG_CONTROLCENTERD
-
-#define CONFIG_ENABLE_36BIT_PHYS
-
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_ADDR_MAP
-#define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */
-#endif
-
-#define CONFIG_L2_CACHE
-#define CONFIG_BTB
-
-#define CONFIG_SYS_CLK_FREQ 66666600
-#define CONFIG_DDR_CLK_FREQ 66666600
-
-#define CONFIG_SYS_RAMBOOT
-
-#ifdef CONFIG_TRAILBLAZER
-
-#define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
-
-/*
- * Config the L2 Cache
- */
-#define CONFIG_SYS_INIT_L2_ADDR 0xf8fc0000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8fc0000ull
-#else
-#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
-#endif
-#define CONFIG_SYS_L2_SIZE (256 << 10)
-#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
-
-#else /* CONFIG_TRAILBLAZER */
-
-#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc
-#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
-
-#endif /* CONFIG_TRAILBLAZER */
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
-
-/*
- * Memory map
- *
- * 0x0000_0000 0x3fff_ffff DDR 1G Cacheable
- * 0xc000_0000 0xdfff_ffff PCI Express Mem 512M non-cacheable
- * 0xffc0_0000 0xffc2_ffff PCI IO range 192K non-cacheable
- *
- * Localbus non-cacheable
- * 0xe000_0000 0xe00f_ffff eLBC 1M non-cacheable
- * 0xf8fc0000 0xf8ff_ffff L2 SRAM 256k Cacheable
- * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0
- * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable
- */
-
-#define CONFIG_SYS_INIT_RAM_LOCK
-#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */
-#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* used area in RAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-#ifdef CONFIG_TRAILBLAZER
-/* leave CCSRBAR at default, because u-boot expects it to be exactly there */
-#define CONFIG_SYS_CCSRBAR CONFIG_SYS_CCSRBAR_DEFAULT
-#else
-#define CONFIG_SYS_CCSRBAR 0xffe00000
-#endif
-#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
-#define CONFIG_SYS_MPC85xx_GPIO3_ADDR (CONFIG_SYS_CCSRBAR+0xf200)
-
-/*
- * DDR Setup
- */
-
-#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
-#define CONFIG_SYS_SDRAM_SIZE 1024
-#define CONFIG_VERY_BIG_RAM
-
-#define CONFIG_DIMM_SLOTS_PER_CTLR 1
-#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
-
-#ifdef CONFIG_TRAILBLAZER
-#define CONFIG_SPD_EEPROM
-#define SPD_EEPROM_ADDRESS 0x52
-/*#define CONFIG_FSL_DDR_INTERACTIVE*/
-#endif
-
-/*
- * Local Bus Definitions
- */
-
-#define CONFIG_SYS_ELBC_BASE 0xe0000000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_ELBC_BASE_PHYS 0xfe0000000ull
-#else
-#define CONFIG_SYS_ELBC_BASE_PHYS CONFIG_SYS_ELBC_BASE
-#endif
-
-#define CONFIG_UART_BR_PRELIM \
- (BR_PHYS_ADDR((CONFIG_SYS_ELBC_BASE_PHYS)) | BR_PS_8 | BR_V)
-#define CONFIG_UART_OR_PRELIM (OR_AM_32KB | 0xff7)
-
-#define CONFIG_SYS_BR0_PRELIM 0 /* CS0 was originally intended for FPGA */
-#define CONFIG_SYS_OR0_PRELIM 0 /* debugging, was never used */
-
-#define CONFIG_SYS_BR1_PRELIM CONFIG_UART_BR_PRELIM
-#define CONFIG_SYS_OR1_PRELIM CONFIG_UART_OR_PRELIM
-
-/*
- * Serial Port
- */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
-
-#define CONFIG_SYS_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
-
-/*
- * I2C
- */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED 400000
-#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
-#define CONFIG_SYS_FSL_I2C2_SPEED 400000
-#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
-#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100
-
-#define CONFIG_PCA9698 /* NXP PCA9698 */
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-
-/*
- * MMC
- */
-#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
-
-#ifndef CONFIG_TRAILBLAZER
-
-/*
- * Video
- */
-#define CONFIG_FSL_DIU_FB
-#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x10000)
-
-/*
- * General PCI
- * Memory space is mapped 1-1, but I/O space must start from 0.
- */
-#define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
-
-#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
-
-#define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc40000000ull
-#else
-#define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000
-#endif
-#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
-#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000
-#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc20000ull
-#else
-#define CONFIG_SYS_PCIE1_IO_PHYS 0xffc20000
-#endif
-#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
-
-/*
- * SATA
- */
-#define CONFIG_LBA48
-
-#define CONFIG_SYS_SATA_MAX_DEVICE 2
-#define CONFIG_SATA1
-#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR
-#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
-#define CONFIG_SATA2
-#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR
-#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
-
-/*
- * Ethernet
- */
-
-#define CONFIG_TSECV2
-
-#define CONFIG_TSEC1 1
-#define CONFIG_TSEC1_NAME "eTSEC1"
-#define CONFIG_TSEC2 1
-#define CONFIG_TSEC2_NAME "eTSEC2"
-
-#define TSEC1_PHY_ADDR 0
-#define TSEC2_PHY_ADDR 1
-
-#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
-#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
-
-#define TSEC1_PHYIDX 0
-#define TSEC2_PHYIDX 0
-
-#define CONFIG_ETHPRIME "eTSEC1"
-
-/*
- * USB
- */
-
-#define CONFIG_HAS_FSL_DR_USB
-#define CONFIG_USB_EHCI_FSL
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-
-#endif /* CONFIG_TRAILBLAZER */
-
-/*
- * Environment
- */
-#if defined(CONFIG_TRAILBLAZER)
-#elif defined(CONFIG_RAMBOOT_SDCARD)
-#define CONFIG_FSL_FIXED_MMC_LOCATION
-#define CONFIG_SYS_MMC_ENV_DEV 0
-#endif
-
-/*
- * Command line configuration.
- */
-
-#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
-
-#ifndef CONFIG_TRAILBLAZER
-/*
- * Board initialisation callbacks
- */
-#endif /* CONFIG_TRAILBLAZER */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_HW_WATCHDOG
-#define CONFIG_LOADS_ECHO
-#define CONFIG_SYS_LOADS_BAUD_CHANGE
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 64 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Linux Memory map */
-#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
-
-/*
- * Environment Configuration
- */
-
-#ifdef CONFIG_TRAILBLAZER
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "mp_holdoff=1\0"
-
-#else
-
-#define CONFIG_HOSTNAME "controlcenterd"
-#define CONFIG_ROOTPATH "/opt/nfsroot"
-#define CONFIG_BOOTFILE "uImage"
-#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP */
-
-#define CONFIG_LOADADDR 1000000
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
- "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \
- "tftpflash=tftpboot $loadaddr $uboot && " \
- "protect off $ubootaddr +$filesize && " \
- "erase $ubootaddr +$filesize && " \
- "cp.b $loadaddr $ubootaddr $filesize && " \
- "protect on $ubootaddr +$filesize && " \
- "cmp.b $loadaddr $ubootaddr $filesize\0" \
- "consoledev=ttyS1\0" \
- "ramdiskaddr=2000000\0" \
- "ramdiskfile=rootfs.ext2.gz.uboot\0" \
- "fdtaddr=1e00000\0" \
- "fdtfile=controlcenterd.dtb\0" \
- "bdev=sda3\0"
-
-/* these are used and NUL-terminated in env_default.h */
-#define CONFIG_NFSBOOTCOMMAND \
- "setenv bootargs root=/dev/nfs rw " \
- "nfsroot=$serverip:$rootpath " \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
- "console=$consoledev,$baudrate $othbootargs $videobootargs;" \
- "tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr - $fdtaddr"
-
-#define CONFIG_RAMBOOTCOMMAND \
- "setenv bootargs root=/dev/ram rw " \
- "console=$consoledev,$baudrate $othbootargs $videobootargs;" \
- "tftp $ramdiskaddr $ramdiskfile;" \
- "tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
-
-#endif /* CONFIG_TRAILBLAZER */
-
-#endif
This board has not been converted to CONFIG_DM_SPI by the deadline. Remove it. Patch-cc: Dirk Eibach <dirk.eibach at gdsys.cc> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com> --- arch/powerpc/cpu/mpc85xx/Kconfig | 1 - board/gdsys/p1022/Kconfig | 22 - board/gdsys/p1022/MAINTAINERS | 9 - board/gdsys/p1022/Makefile | 10 - board/gdsys/p1022/controlcenterd-id.c | 1244 ----------------- board/gdsys/p1022/controlcenterd-id.h | 15 - board/gdsys/p1022/controlcenterd.c | 431 ------ board/gdsys/p1022/ddr.c | 68 - board/gdsys/p1022/diu.c | 85 -- board/gdsys/p1022/law.c | 16 - board/gdsys/p1022/sdhc_boot.c | 63 - board/gdsys/p1022/tlb.c | 73 - ...trolcenterd_36BIT_SDCARD_DEVELOP_defconfig | 68 - configs/controlcenterd_36BIT_SDCARD_defconfig | 68 - ...ntrolcenterd_TRAILBLAZER_DEVELOP_defconfig | 36 - configs/controlcenterd_TRAILBLAZER_defconfig | 36 - include/configs/controlcenterd.h | 362 ----- 17 files changed, 2607 deletions(-) delete mode 100644 board/gdsys/p1022/Kconfig delete mode 100644 board/gdsys/p1022/MAINTAINERS delete mode 100644 board/gdsys/p1022/Makefile delete mode 100644 board/gdsys/p1022/controlcenterd-id.c delete mode 100644 board/gdsys/p1022/controlcenterd-id.h delete mode 100644 board/gdsys/p1022/controlcenterd.c delete mode 100644 board/gdsys/p1022/ddr.c delete mode 100644 board/gdsys/p1022/diu.c delete mode 100644 board/gdsys/p1022/law.c delete mode 100644 board/gdsys/p1022/sdhc_boot.c delete mode 100644 board/gdsys/p1022/tlb.c delete mode 100644 configs/controlcenterd_36BIT_SDCARD_DEVELOP_defconfig delete mode 100644 configs/controlcenterd_36BIT_SDCARD_defconfig delete mode 100644 configs/controlcenterd_TRAILBLAZER_DEVELOP_defconfig delete mode 100644 configs/controlcenterd_TRAILBLAZER_defconfig delete mode 100644 include/configs/controlcenterd.h