From patchwork Wed May 27 12:56:35 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jagan Teki X-Patchwork-Id: 246714 List-Id: U-Boot discussion From: jagan at amarulasolutions.com (Jagan Teki) Date: Wed, 27 May 2020 18:26:35 +0530 Subject: [PATCH v2 21/23] silica: Drop pengwyn In-Reply-To: <20200527125637.149189-1-jagan@amarulasolutions.com> References: <20200527125637.149189-1-jagan@amarulasolutions.com> Message-ID: <20200527125637.149189-22-jagan@amarulasolutions.com> OF_CONTROL, DM_SPI and other driver model migration deadlines are expired for this board. Drop it. Cc: Lothar Felten Signed-off-by: Jagan Teki --- Changes for v2: - new patch arch/arm/Kconfig | 1 - arch/arm/mach-omap2/am33xx/Kconfig | 7 - board/silica/pengwyn/Kconfig | 15 --- board/silica/pengwyn/MAINTAINERS | 6 - board/silica/pengwyn/Makefile | 11 -- board/silica/pengwyn/board.c | 204 ----------------------------- board/silica/pengwyn/board.h | 14 -- board/silica/pengwyn/mux.c | 97 -------------- configs/pengwyn_defconfig | 67 ---------- include/configs/pengwyn.h | 166 ----------------------- 10 files changed, 588 deletions(-) delete mode 100644 board/silica/pengwyn/Kconfig delete mode 100644 board/silica/pengwyn/MAINTAINERS delete mode 100644 board/silica/pengwyn/Makefile delete mode 100644 board/silica/pengwyn/board.c delete mode 100644 board/silica/pengwyn/board.h delete mode 100644 board/silica/pengwyn/mux.c delete mode 100644 configs/pengwyn_defconfig delete mode 100644 include/configs/pengwyn.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 7f328e6afe..2f431b60af 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1904,7 +1904,6 @@ source "board/hisilicon/hikey/Kconfig" source "board/hisilicon/hikey960/Kconfig" source "board/hisilicon/poplar/Kconfig" source "board/isee/igep003x/Kconfig" -source "board/silica/pengwyn/Kconfig" source "board/spear/spear300/Kconfig" source "board/spear/spear310/Kconfig" source "board/spear/spear320/Kconfig" diff --git a/arch/arm/mach-omap2/am33xx/Kconfig b/arch/arm/mach-omap2/am33xx/Kconfig index 60e5ec5684..9e0d700280 100644 --- a/arch/arm/mach-omap2/am33xx/Kconfig +++ b/arch/arm/mach-omap2/am33xx/Kconfig @@ -146,13 +146,6 @@ config TARGET_ETAMIN select DM_SERIAL imply CMD_DM -config TARGET_PENGWYN - bool "Support pengwyn" - select DM - select DM_GPIO - select DM_SERIAL - imply CMD_DM - config TARGET_PHYCORE_AM335X_R2 bool "Support phyCORE AM335X R2" select DM diff --git a/board/silica/pengwyn/Kconfig b/board/silica/pengwyn/Kconfig deleted file mode 100644 index f2e1098f62..0000000000 --- a/board/silica/pengwyn/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_PENGWYN - -config SYS_BOARD - default "pengwyn" - -config SYS_VENDOR - default "silica" - -config SYS_SOC - default "am33xx" - -config SYS_CONFIG_NAME - default "pengwyn" - -endif diff --git a/board/silica/pengwyn/MAINTAINERS b/board/silica/pengwyn/MAINTAINERS deleted file mode 100644 index 14ef7750c5..0000000000 --- a/board/silica/pengwyn/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -PENGWYN BOARD -M: Lothar Felten -S: Maintained -F: board/silica/pengwyn/ -F: include/configs/pengwyn.h -F: configs/pengwyn_defconfig diff --git a/board/silica/pengwyn/Makefile b/board/silica/pengwyn/Makefile deleted file mode 100644 index c34b9b1dd8..0000000000 --- a/board/silica/pengwyn/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Makefile -# -# Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - -ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),) -obj-y := mux.o -endif - -obj-y += board.o diff --git a/board/silica/pengwyn/board.c b/board/silica/pengwyn/board.c deleted file mode 100644 index e3c9d9e755..0000000000 --- a/board/silica/pengwyn/board.c +++ /dev/null @@ -1,204 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * board.c - * - * Copyright (C) 2013 Lothar Felten - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "board.h" - -DECLARE_GLOBAL_DATA_PTR; - -static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; - -#if defined(CONFIG_SPL_BUILD) - -/* DDR3 RAM timings */ -static const struct ddr_data ddr3_data = { - .datardsratio0 = MT41K128MJT187E_RD_DQS, - .datawdsratio0 = MT41K128MJT187E_WR_DQS, - .datafwsratio0 = MT41K128MJT187E_PHY_FIFO_WE, - .datawrsratio0 = MT41K128MJT187E_PHY_WR_DATA, -}; - -static const struct cmd_control ddr3_cmd_ctrl_data = { - .cmd0csratio = MT41K128MJT187E_RATIO, - .cmd0iclkout = MT41K128MJT187E_INVERT_CLKOUT, - .cmd1csratio = MT41K128MJT187E_RATIO, - .cmd1iclkout = MT41K128MJT187E_INVERT_CLKOUT, - .cmd2csratio = MT41K128MJT187E_RATIO, - .cmd2iclkout = MT41K128MJT187E_INVERT_CLKOUT, -}; - -static struct emif_regs ddr3_emif_reg_data = { - .sdram_config = MT41K128MJT187E_EMIF_SDCFG, - .ref_ctrl = MT41K128MJT187E_EMIF_SDREF, - .sdram_tim1 = MT41K128MJT187E_EMIF_TIM1, - .sdram_tim2 = MT41K128MJT187E_EMIF_TIM2, - .sdram_tim3 = MT41K128MJT187E_EMIF_TIM3, - .zq_config = MT41K128MJT187E_ZQ_CFG, - .emif_ddr_phy_ctlr_1 = MT41K128MJT187E_EMIF_READ_LATENCY | - PHY_EN_DYN_PWRDN, -}; - -const struct ctrl_ioregs ddr3_ioregs = { - .cm0ioctl = MT41K128MJT187E_IOCTRL_VALUE, - .cm1ioctl = MT41K128MJT187E_IOCTRL_VALUE, - .cm2ioctl = MT41K128MJT187E_IOCTRL_VALUE, - .dt0ioctl = MT41K128MJT187E_IOCTRL_VALUE, - .dt1ioctl = MT41K128MJT187E_IOCTRL_VALUE, -}; - -#ifdef CONFIG_SPL_OS_BOOT -int spl_start_uboot(void) -{ - /* break into full u-boot on 'c' */ - return serial_tstc() && serial_getc() == 'c'; -} -#endif - -#define OSC (V_OSCK/1000000) -const struct dpll_params dpll_ddr_266 = { - 266, OSC-1, 1, -1, -1, -1, -1}; -const struct dpll_params dpll_ddr_303 = { - 303, OSC-1, 1, -1, -1, -1, -1}; -const struct dpll_params dpll_ddr_400 = { - 400, OSC-1, 1, -1, -1, -1, -1}; - -void am33xx_spl_board_init(void) -{ - /* - * The pengwyn board uses the TPS650250 PMIC without I2C - * interface and will output the following fixed voltages: - * DCDC1=3V3 (IO) DCDC2=1V5 (DDR) DCDC3=1V26 (Vmpu) - * VLDO1=1V8 (IO) VLDO2=1V8(IO) - * Vcore=1V1 is fixed, generated by TPS62231 - */ - - /* Get the frequency */ - dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev); - - /* Set CORE Frequencies to OPP100 */ - do_setup_dpll(&dpll_core_regs, &dpll_core_opp100); - - /* 720MHz cpu, this might change on newer board revisions */ - dpll_mpu_opp100.m = MPUPLL_M_720; - do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100); -} - -const struct dpll_params *get_dpll_ddr_params(void) -{ - /* future configs can return other clock settings */ - return &dpll_ddr_303; -} - -void set_uart_mux_conf(void) -{ - enable_uart0_pin_mux(); -} - -void set_mux_conf_regs(void) -{ - enable_board_pin_mux(); -} - -void sdram_init(void) -{ - config_ddr(303, &ddr3_ioregs, &ddr3_data, - &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0); -} -#endif /* if CONFIG_SPL_BUILD */ - -/* - * Basic board specific setup. Pinmux has been handled already. - */ -int board_init(void) -{ - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - gpmc_init(); - return 0; -} - -#ifdef CONFIG_DRIVER_TI_CPSW -static void cpsw_control(int enabled) -{ - /* VTP can be added here */ - return; -} - -static struct cpsw_slave_data cpsw_slaves[] = { - { - .slave_reg_ofs = 0x208, - .sliver_reg_ofs = 0xd80, - .phy_addr = 1, - .phy_if = PHY_INTERFACE_MODE_MII, - }, -}; - -static struct cpsw_platform_data cpsw_data = { - .mdio_base = CPSW_MDIO_BASE, - .cpsw_base = CPSW_BASE, - .mdio_div = 0xff, - .channels = 8, - .cpdma_reg_ofs = 0x800, - .slaves = 1, - .slave_data = cpsw_slaves, - .ale_reg_ofs = 0xd00, - .ale_entries = 1024, - .host_port_reg_ofs = 0x108, - .hw_stats_reg_ofs = 0x900, - .bd_ram_ofs = 0x2000, - .mac_control = (1 << 5), - .control = cpsw_control, - .host_port_num = 0, - .version = CPSW_CTRL_VERSION_2, -}; - -int board_eth_init(bd_t *bis) -{ - int rv, n = 0; - uint8_t mac_addr[6]; - uint32_t mac_hi, mac_lo; - - if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { - printf(" not set. Reading from E-fuse\n"); - /* try reading mac address from efuse */ - mac_lo = readl(&cdev->macid0l); - mac_hi = readl(&cdev->macid0h); - mac_addr[0] = mac_hi & 0xFF; - mac_addr[1] = (mac_hi & 0xFF00) >> 8; - mac_addr[2] = (mac_hi & 0xFF0000) >> 16; - mac_addr[3] = (mac_hi & 0xFF000000) >> 24; - mac_addr[4] = mac_lo & 0xFF; - mac_addr[5] = (mac_lo & 0xFF00) >> 8; - - if (is_valid_ethaddr(mac_addr)) - eth_env_set_enetaddr("ethaddr", mac_addr); - else - return n; - } - - writel(MII_MODE_ENABLE, &cdev->miisel); - - rv = cpsw_register(&cpsw_data); - if (rv < 0) - printf("Error %d registering CPSW switch\n", rv); - else - n += rv; - return n; -} -#endif /* if CONFIG_DRIVER_TI_CPSW */ diff --git a/board/silica/pengwyn/board.h b/board/silica/pengwyn/board.h deleted file mode 100644 index 3d5ce6d393..0000000000 --- a/board/silica/pengwyn/board.h +++ /dev/null @@ -1,14 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * board.h - * - * Copyright (C) 2013 Lothar Felten - */ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -void enable_uart0_pin_mux(void); -void enable_board_pin_mux(void); - -#endif diff --git a/board/silica/pengwyn/mux.c b/board/silica/pengwyn/mux.c deleted file mode 100644 index 7583e833ed..0000000000 --- a/board/silica/pengwyn/mux.c +++ /dev/null @@ -1,97 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * mux.c - * - * Copyright (C) 2013 Lothar Felten - */ - -#include -#include -#include -#include -#include -#include "board.h" - -/* UART0 pins E15(rx),E16(tx) [E17(rts),E18(cts)] */ -static struct module_pin_mux uart0_pin_mux[] = { - {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */ - {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */ - {-1}, -}; - -/* unused: UART1 pins D15(tx),D16(rx),D17(cts),D18(rts) */ - -/* I2C pins C16(scl)/C17(sda) */ -static struct module_pin_mux i2c0_pin_mux[] = { - {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | - PULLUDEN | SLEWCTRL)}, /* I2C0_DATA */ - {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | - PULLUDEN | SLEWCTRL)}, /* I2C0_SCLK */ - {-1}, -}; - -/* MMC0 pins */ -static struct module_pin_mux mmc0_pin_mux[] = { - {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */ - {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */ - {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */ - {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */ - {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */ - {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */ - {OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUP_EN)}, /* MMC0_CD */ - {-1}, -}; - -/* MII pins */ -static struct module_pin_mux mii1_pin_mux[] = { - {OFFSET(mii1_rxerr), MODE(0) | RXACTIVE}, /* MII1_RXERR */ - {OFFSET(mii1_txen), MODE(0)}, /* MII1_TXEN */ - {OFFSET(mii1_rxdv), MODE(0) | RXACTIVE}, /* MII1_RXDV */ - {OFFSET(mii1_txd3), MODE(0)}, /* MII1_TXD3 */ - {OFFSET(mii1_txd2), MODE(0)}, /* MII1_TXD2 */ - {OFFSET(mii1_txd1), MODE(0)}, /* MII1_TXD1 */ - {OFFSET(mii1_txd0), MODE(0)}, /* MII1_TXD0 */ - {OFFSET(mii1_txclk), MODE(0) | RXACTIVE}, /* MII1_TXCLK */ - {OFFSET(mii1_rxclk), MODE(0) | RXACTIVE}, /* MII1_RXCLK */ - {OFFSET(mii1_rxd3), MODE(0) | RXACTIVE}, /* MII1_RXD3 */ - {OFFSET(mii1_rxd2), MODE(0) | RXACTIVE}, /* MII1_RXD2 */ - {OFFSET(mii1_rxd1), MODE(0) | RXACTIVE}, /* MII1_RXD1 */ - {OFFSET(mii1_rxd0), MODE(0) | RXACTIVE}, /* MII1_RXD0 */ - {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */ - {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */ - {-1}, -}; - -/* NAND pins */ -static struct module_pin_mux nand_pin_mux[] = { - {OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */ - {OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */ - {OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */ - {OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */ - {OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */ - {OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */ - {OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */ - {OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */ - {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */ - {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */ - {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */ - {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */ - {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */ - {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */ - {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */ - {-1}, -}; - -void enable_uart0_pin_mux(void) -{ - configure_module_pin_mux(uart0_pin_mux); -} - -void enable_board_pin_mux() -{ - configure_module_pin_mux(i2c0_pin_mux); - configure_module_pin_mux(uart0_pin_mux); - configure_module_pin_mux(mii1_pin_mux); - configure_module_pin_mux(mmc0_pin_mux); - configure_module_pin_mux(nand_pin_mux); -} diff --git a/configs/pengwyn_defconfig b/configs/pengwyn_defconfig deleted file mode 100644 index 3d0fcf3ea0..0000000000 --- a/configs/pengwyn_defconfig +++ /dev/null @@ -1,67 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_CPU_INIT=y -CONFIG_ARCH_OMAP2PLUS=y -CONFIG_SPL_GPIO_SUPPORT=y -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_ENV_SIZE=0x4000 -CONFIG_AM33XX=y -CONFIG_TARGET_PENGWYN=y -CONFIG_SPL_MMC_SUPPORT=y -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_SPL=y -CONFIG_SPL_FS_FAT=y -CONFIG_SPL_LIBDISK_SUPPORT=y -CONFIG_DISTRO_DEFAULTS=y -# CONFIG_USE_BOOTCOMMAND is not set -CONFIG_SYS_CONSOLE_INFO_QUIET=y -CONFIG_VERSION_VARIABLE=y -CONFIG_ARCH_MISC_INIT=y -CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_ETH_SUPPORT=y -CONFIG_SPL_FS_EXT4=y -CONFIG_SPL_I2C_SUPPORT=y -CONFIG_SPL_MTD_SUPPORT=y -CONFIG_SPL_NET_SUPPORT=y -CONFIG_SPL_NET_VCI_STRING="AM335x U-Boot SPL" -CONFIG_SPL_OS_BOOT=y -CONFIG_SPL_POWER_SUPPORT=y -CONFIG_SPL_WATCHDOG_SUPPORT=y -CONFIG_SPL_YMODEM_SUPPORT=y -CONFIG_CMD_SPL=y -CONFIG_CMD_SPL_NAND_OFS=0x240000 -CONFIG_CMD_ASKENV=y -CONFIG_CMD_EEPROM=y -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_SPI=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_WOL=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0" -CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(SPL),512k(SPL.backup1),512k(SPL.backup2),512k(SPL.backup3),1536k(u-boot),512k(u-boot-spl-os),512k(u-boot-env),5m(kernel),-(rootfs)" -CONFIG_CMD_DIAG=y -CONFIG_ENV_IS_IN_NAND=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -CONFIG_MMC_OMAP_HS=y -CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_MII=y -CONFIG_DRIVER_TI_CPSW=y -CONFIG_SPI=y -CONFIG_OMAP3_SPI=y -CONFIG_USB=y -CONFIG_USB_MUSB_HOST=y -CONFIG_USB_MUSB_GADGET=y -CONFIG_USB_MUSB_DSPS=y -CONFIG_USB_GADGET=y -CONFIG_FAT_WRITE=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/pengwyn.h b/include/configs/pengwyn.h deleted file mode 100644 index 17d1981b4e..0000000000 --- a/include/configs/pengwyn.h +++ /dev/null @@ -1,166 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * pengwyn.h - * - * Copyright (C) 2013 Lothar Felten - * - * based on am335x_evm.h, Copyright (C) 2011 Texas Instruments Inc. - */ - -#ifndef __CONFIG_PENGWYN_H -#define __CONFIG_PENGWYN_H - - -#include - -/* Clock Defines */ -#define V_OSCK 24000000 -#define V_SCLK V_OSCK - -/* set env size */ - -#ifndef CONFIG_SPL_BUILD -#define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x80200000\0" \ - "fdtaddr=0x80F80000\0" \ - "bootpart=0:2\0" \ - "bootdir=/boot\0" \ - "bootfile=zImage\0" \ - "fdtfile=am335x-pengwyn.dtb\0" \ - "console=ttyO0,115200n8\0" \ - "optargs=\0" \ - "mmcdev=0\0" \ - "mmcroot=/dev/mmcblk0p2 ro\0" \ - "mmcrootfstype=ext4 rootwait\0" \ - "rootpath=/export/rootfs\0" \ - "nfsopts=nolock\0" \ - "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \ - "::off\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ - "netargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "root=/dev/nfs " \ - "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \ - "ip=dhcp\0" \ - "bootenv=uEnv.txt\0" \ - "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ - "importbootenv=echo Importing environment from mmc ...; " \ - "env import -t $loadaddr $filesize\0" \ - "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ - "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ - "mmcloados=run mmcargs; " \ - "bootz ${loadaddr} - ${fdtaddr};\0" \ - "mmcboot=mmc dev ${mmcdev}; " \ - "if mmc rescan; then " \ - "echo SD/MMC found on device ${mmcdev};" \ - "if run loadbootenv; then " \ - "echo Loaded environment from ${bootenv};" \ - "run importbootenv;" \ - "fi;" \ - "if test -n $uenvcmd; then " \ - "echo Running uenvcmd ...;" \ - "run uenvcmd;" \ - "fi;" \ - "if run loadimage; then " \ - "run loadfdt;" \ - "run mmcloados;" \ - "fi;" \ - "fi;\0" \ - "netboot=echo Booting from network ...; " \ - "setenv autoload no; " \ - "dhcp; " \ - "tftp ${loadaddr} ${bootfile}; " \ - "tftp ${fdtaddr} ${fdtfile}; " \ - "run netargs; " \ - "bootz ${loadaddr} - ${fdtaddr}\0" \ - "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ - "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ - "nandargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "root=${nandroot} " \ - "rootfstype=${nandrootfstype}\0" \ - "nandroot=ubi0:rootfs rw ubi.mtd=7,2048\0" \ - "nandrootfstype=ubifs rootwait=1\0" \ - "nandboot=echo Booting from nand ...; " \ - "run nandargs; " \ - "nand read ${fdtaddr} u-boot-spl-os; " \ - "nand read ${loadaddr} kernel; " \ - "bootz ${loadaddr} - ${fdtaddr}\0" -#endif - -#define CONFIG_BOOTCOMMAND \ - "run mmcboot;" \ - "run nandboot;" - -/* NS16550 Configuration: primary UART via FTDI */ -#define CONFIG_SYS_NS16550_COM1 0x44e09000 - -/* I2C Configuration */ -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_ENV_EEPROM_IS_ON_I2C -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 - -/* SPL */ - -/* NAND support */ - -/* NAND Configuration. */ -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ - CONFIG_SYS_NAND_PAGE_SIZE) -#define CONFIG_SYS_NAND_PAGE_SIZE 4096 -#define CONFIG_SYS_NAND_OOBSIZE 224 -#define CONFIG_SYS_NAND_ONFI_DETECTION -#define CONFIG_SYS_NAND_BLOCK_SIZE (128*4096) -#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS -#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17,\ - 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33,\ - 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49,\ - 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65,\ - 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81,\ - 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97,\ - 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113,\ - 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, 130, 131, 132, 133,\ - 134, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, 150, 151, 152, 153,\ - 154, 155, 156, 157, 158, 159, 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171, 172, 173,\ - 174, 175, 176, 177, 178, 179, 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, 190, 191, 192, 193,\ - 194, 195, 196, 197, 198, 199, 200, 201, 202, 203, 204, 205, 206, 207, 208, 209} - -#define CONFIG_SYS_NAND_ECCSIZE 512 -#define CONFIG_SYS_NAND_ECCBYTES 26 -#define CONFIG_SYS_NAND_ECCSTEPS 8 -#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \ - CONFIG_SYS_NAND_ECCSTEPS) -#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW -/* END NAND Configuration. */ - -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -/* #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 */ -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000 - -/* Size must be a multiple of Nand erase size (524288 b) */ -#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ -/* NAND: SPL falcon mode configs */ -#ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 -#endif - -/* - * USB configuration. We enable MUSB support, both for host and for - * gadget. We set USB0 as peripheral and USB1 as host, based on the - * board schematic and physical port wired to each. Then for host we - * add mass storage support. - */ -#define CONFIG_AM335X_USB0 -#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL -#define CONFIG_AM335X_USB1 -#define CONFIG_AM335X_USB1_MODE MUSB_HOST - -/* Network */ -#define CONFIG_PHY_RESET 1 - -#endif /* ! __CONFIG_PENGWYN_H */