From patchwork Wed May 27 12:56:31 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jagan Teki X-Patchwork-Id: 246710 List-Id: U-Boot discussion From: jagan at amarulasolutions.com (Jagan Teki) Date: Wed, 27 May 2020 18:26:31 +0530 Subject: [PATCH v2 17/23] ti: Drop omap5 uevm In-Reply-To: <20200527125637.149189-1-jagan@amarulasolutions.com> References: <20200527125637.149189-1-jagan@amarulasolutions.com> Message-ID: <20200527125637.149189-18-jagan@amarulasolutions.com> DM, DM_SPI and other driver model migration deadlines are expired for this board. Drop it. Cc: Lokesh Vutla Signed-off-by: Jagan Teki --- Changes for v2: - none arch/arm/mach-omap2/omap5/Kconfig | 4 - board/ti/omap5_uevm/Kconfig | 12 -- board/ti/omap5_uevm/MAINTAINERS | 6 - board/ti/omap5_uevm/Makefile | 6 - board/ti/omap5_uevm/README | 25 --- board/ti/omap5_uevm/evm.c | 283 ------------------------------ board/ti/omap5_uevm/mux_data.h | 57 ------ configs/omap5_uevm_defconfig | 55 ------ include/configs/omap5_uevm.h | 62 ------- 9 files changed, 510 deletions(-) delete mode 100644 board/ti/omap5_uevm/Kconfig delete mode 100644 board/ti/omap5_uevm/MAINTAINERS delete mode 100644 board/ti/omap5_uevm/Makefile delete mode 100644 board/ti/omap5_uevm/README delete mode 100644 board/ti/omap5_uevm/evm.c delete mode 100644 board/ti/omap5_uevm/mux_data.h delete mode 100644 configs/omap5_uevm_defconfig delete mode 100644 include/configs/omap5_uevm.h diff --git a/arch/arm/mach-omap2/omap5/Kconfig b/arch/arm/mach-omap2/omap5/Kconfig index a0c0b93a00..e73106e321 100644 --- a/arch/arm/mach-omap2/omap5/Kconfig +++ b/arch/arm/mach-omap2/omap5/Kconfig @@ -9,9 +9,6 @@ choice prompt "OMAP5 board select" optional -config TARGET_OMAP5_UEVM - bool "TI OMAP5 uEVM board" - config TARGET_DRA7XX_EVM bool "TI DRA7XX" select BOARD_LATE_INIT @@ -153,7 +150,6 @@ endchoice endmenu endif -source "board/ti/omap5_uevm/Kconfig" source "board/ti/dra7xx/Kconfig" source "board/ti/am57xx/Kconfig" diff --git a/board/ti/omap5_uevm/Kconfig b/board/ti/omap5_uevm/Kconfig deleted file mode 100644 index aa13844544..0000000000 --- a/board/ti/omap5_uevm/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_OMAP5_UEVM - -config SYS_BOARD - default "omap5_uevm" - -config SYS_VENDOR - default "ti" - -config SYS_CONFIG_NAME - default "omap5_uevm" - -endif diff --git a/board/ti/omap5_uevm/MAINTAINERS b/board/ti/omap5_uevm/MAINTAINERS deleted file mode 100644 index 280ea2f91f..0000000000 --- a/board/ti/omap5_uevm/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -OMAP5_UEVM BOARD -M: Lokesh Vutla -S: Maintained -F: board/ti/omap5_uevm/ -F: include/configs/omap5_uevm.h -F: configs/omap5_uevm_defconfig diff --git a/board/ti/omap5_uevm/Makefile b/board/ti/omap5_uevm/Makefile deleted file mode 100644 index 17ee516d26..0000000000 --- a/board/ti/omap5_uevm/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. - -obj-y := evm.o diff --git a/board/ti/omap5_uevm/README b/board/ti/omap5_uevm/README deleted file mode 100644 index 970e2eceb7..0000000000 --- a/board/ti/omap5_uevm/README +++ /dev/null @@ -1,25 +0,0 @@ -Summary -======= - -This document covers various features of the 'omap5_uevm' build and some -related uses. - -eMMC boot partition use -======================= - -It is possible, depending on SYSBOOT configuration to boot from the eMMC -boot partitions using (name depending on documentation referenced) -Alternative Boot operation mode or Boot Sequence Option 1/2. In this -example we load MLO and u-boot.img from the build into DDR and then use -'mmc bootbus' to set the required rate (see TRM) and 'mmc partconfig' to -set boot0 as the boot device. -U-Boot # setenv autoload no -U-Boot # usb start -U-Boot # dhcp -U-Boot # mmc dev 1 1 -U-Boot # tftp ${loadaddr} omap5uevm/MLO -U-Boot # mmc write ${loadaddr} 0 100 -U-Boot # tftp ${loadaddr} omap5uevm/u-boot.img -U-Boot # mmc write ${loadaddr} 300 400 -U-Boot # mmc bootbus 1 2 0 2 -U-Boot # mmc partconf 1 1 1 0 diff --git a/board/ti/omap5_uevm/evm.c b/board/ti/omap5_uevm/evm.c deleted file mode 100644 index e35f319b46..0000000000 --- a/board/ti/omap5_uevm/evm.c +++ /dev/null @@ -1,283 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2010 - * Texas Instruments Incorporated, - * Aneesh V - * Steve Sakoman - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "mux_data.h" - -#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_XHCI_OMAP) -#include -#include -#include -#include -#include -#include -#include -#include - -#define DIE_ID_REG_BASE (OMAP54XX_L4_CORE_BASE + 0x2000) -#define DIE_ID_REG_OFFSET 0x200 - -#endif - -DECLARE_GLOBAL_DATA_PTR; - -const struct omap_sysinfo sysinfo = { - "Board: OMAP5432 uEVM\n" -}; - -/** - * @brief tca642x_init - uEVM default values for the GPIO expander - * input reg, output reg, polarity reg, configuration reg - */ -struct tca642x_bank_info tca642x_init[] = { - { .input_reg = 0x00, - .output_reg = 0x04, - .polarity_reg = 0x00, - .configuration_reg = 0x80 }, - { .input_reg = 0x00, - .output_reg = 0x00, - .polarity_reg = 0x00, - .configuration_reg = 0xff }, - { .input_reg = 0x00, - .output_reg = 0x00, - .polarity_reg = 0x00, - .configuration_reg = 0x40 }, -}; - -#ifdef CONFIG_USB_DWC3 -static struct dwc3_device usb_otg_ss = { - .maximum_speed = USB_SPEED_SUPER, - .base = OMAP5XX_USB_OTG_SS_BASE, - .tx_fifo_resize = false, - .index = 0, -}; - -static struct dwc3_omap_device usb_otg_ss_glue = { - .base = (void *)OMAP5XX_USB_OTG_SS_GLUE_BASE, - .utmi_mode = DWC3_OMAP_UTMI_MODE_SW, - .index = 0, -}; - -static struct ti_usb_phy_device usb_phy_device = { - .pll_ctrl_base = (void *)OMAP5XX_USB3_PHY_PLL_CTRL, - .usb2_phy_power = (void *)OMAP5XX_USB2_PHY_POWER, - .usb3_phy_power = (void *)OMAP5XX_USB3_PHY_POWER, - .index = 0, -}; - -int board_usb_init(int index, enum usb_init_type init) -{ - if (index) { - printf("Invalid Controller Index\n"); - return -EINVAL; - } - - if (init == USB_INIT_DEVICE) { - usb_otg_ss.dr_mode = USB_DR_MODE_PERIPHERAL; - usb_otg_ss_glue.vbus_id_status = OMAP_DWC3_VBUS_VALID; - } else { - usb_otg_ss.dr_mode = USB_DR_MODE_HOST; - usb_otg_ss_glue.vbus_id_status = OMAP_DWC3_ID_GROUND; - } - - enable_usb_clocks(index); - ti_usb_phy_uboot_init(&usb_phy_device); - dwc3_omap_uboot_init(&usb_otg_ss_glue); - dwc3_uboot_init(&usb_otg_ss); - - return 0; -} - -int board_usb_cleanup(int index, enum usb_init_type init) -{ - if (index) { - printf("Invalid Controller Index\n"); - return -EINVAL; - } - - ti_usb_phy_uboot_exit(index); - dwc3_uboot_exit(index); - dwc3_omap_uboot_exit(index); - disable_usb_clocks(index); - - return 0; -} - -int usb_gadget_handle_interrupts(int index) -{ - u32 status; - - status = dwc3_omap_uboot_interrupt_status(index); - if (status) - dwc3_uboot_handle_interrupt(index); - - return 0; -} -#endif - -/** - * @brief board_init - * - * @return 0 - */ -int board_init(void) -{ - gpmc_init(); - gd->bd->bi_arch_number = MACH_TYPE_OMAP5_SEVM; - gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */ - - tca642x_set_inital_state(CONFIG_SYS_I2C_TCA642X_ADDR, tca642x_init); - - return 0; -} - -int board_eth_init(bd_t *bis) -{ - return 0; -} - -#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_XHCI_OMAP) -static void enable_host_clocks(void) -{ - int auxclk; - int hs_clk_ctrl_val = (OPTFCLKEN_HSIC60M_P3_CLK | - OPTFCLKEN_HSIC480M_P3_CLK | - OPTFCLKEN_HSIC60M_P2_CLK | - OPTFCLKEN_HSIC480M_P2_CLK | - OPTFCLKEN_UTMI_P3_CLK | OPTFCLKEN_UTMI_P2_CLK); - - /* Enable port 2 and 3 clocks*/ - setbits_le32((*prcm)->cm_l3init_hsusbhost_clkctrl, hs_clk_ctrl_val); - - /* Enable port 2 and 3 usb host ports tll clocks*/ - setbits_le32((*prcm)->cm_l3init_hsusbtll_clkctrl, - (OPTFCLKEN_USB_CH1_CLK_ENABLE | OPTFCLKEN_USB_CH2_CLK_ENABLE)); -#ifdef CONFIG_USB_XHCI_OMAP - /* Enable the USB OTG Super speed clocks */ - setbits_le32((*prcm)->cm_l3init_usb_otg_ss_clkctrl, - (OPTFCLKEN_REFCLK960M | OTG_SS_CLKCTRL_MODULEMODE_HW)); -#endif - - auxclk = readl((*prcm)->scrm_auxclk1); - /* Request auxilary clock */ - auxclk |= AUXCLK_ENABLE_MASK; - writel(auxclk, (*prcm)->scrm_auxclk1); -} -#endif - -/** - * @brief misc_init_r - Configure EVM board specific configurations - * such as power configurations, ethernet initialization as phase2 of - * boot sequence - * - * @return 0 - */ -int misc_init_r(void) -{ -#ifdef CONFIG_PALMAS_POWER - palmas_init_settings(); -#endif - - omap_die_id_usbethaddr(); - - return 0; -} - -void set_muxconf_regs(void) -{ - do_set_mux((*ctrl)->control_padconf_core_base, - core_padconf_array_essential, - sizeof(core_padconf_array_essential) / - sizeof(struct pad_conf_entry)); - - do_set_mux((*ctrl)->control_padconf_wkup_base, - wkup_padconf_array_essential, - sizeof(wkup_padconf_array_essential) / - sizeof(struct pad_conf_entry)); -} - -#if defined(CONFIG_MMC) -int board_mmc_init(bd_t *bis) -{ - omap_mmc_init(0, 0, 0, -1, -1); - omap_mmc_init(1, 0, 0, -1, -1); - return 0; -} -#endif - -#ifdef CONFIG_USB_EHCI_HCD -static struct omap_usbhs_board_data usbhs_bdata = { - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, - .port_mode[1] = OMAP_EHCI_PORT_MODE_HSIC, - .port_mode[2] = OMAP_EHCI_PORT_MODE_HSIC, -}; - -int ehci_hcd_init(int index, enum usb_init_type init, - struct ehci_hccr **hccr, struct ehci_hcor **hcor) -{ - int ret; - - enable_host_clocks(); - - ret = omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor); - if (ret < 0) { - puts("Failed to initialize ehci\n"); - return ret; - } - - return 0; -} - -int ehci_hcd_stop(void) -{ - return omap_ehci_hcd_stop(); -} - -void usb_hub_reset_devices(struct usb_hub_device *hub, int port) -{ - /* The LAN9730 needs to be reset after the port power has been set. */ - if (port == 3) { - gpio_direction_output(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO, 0); - udelay(10); - gpio_direction_output(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO, 1); - } -} -#endif - -#ifdef CONFIG_USB_XHCI_OMAP -/** - * @brief board_usb_init - Configure EVM board specific configurations - * for the LDO's and clocks for the USB blocks. - * - * @return 0 - */ -int board_usb_init(int index, enum usb_init_type init) -{ - int ret; -#ifdef CONFIG_PALMAS_USB_SS_PWR - ret = palmas_enable_ss_ldo(); -#endif - - enable_host_clocks(); - - return 0; -} -#endif diff --git a/board/ti/omap5_uevm/mux_data.h b/board/ti/omap5_uevm/mux_data.h deleted file mode 100644 index 3c4ba47497..0000000000 --- a/board/ti/omap5_uevm/mux_data.h +++ /dev/null @@ -1,57 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2010 - * Texas Instruments Incorporated, - * - * Sricharan R - */ -#ifndef _EVM5430_MUX_DATA_H -#define _EVM5430_MUX_DATA_H - -#include - -const struct pad_conf_entry core_padconf_array_essential[] = { - - {EMMC_CLK, (PTU | IEN | M0)}, /* EMMC_CLK */ - {EMMC_CMD, (PTU | IEN | M0)}, /* EMMC_CMD */ - {EMMC_DATA0, (PTU | IEN | M0)}, /* EMMC_DATA0 */ - {EMMC_DATA1, (PTU | IEN | M0)}, /* EMMC_DATA1 */ - {EMMC_DATA2, (PTU | IEN | M0)}, /* EMMC_DATA2 */ - {EMMC_DATA3, (PTU | IEN | M0)}, /* EMMC_DATA3 */ - {EMMC_DATA4, (PTU | IEN | M0)}, /* EMMC_DATA4 */ - {EMMC_DATA5, (PTU | IEN | M0)}, /* EMMC_DATA5 */ - {EMMC_DATA6, (PTU | IEN | M0)}, /* EMMC_DATA6 */ - {EMMC_DATA7, (PTU | IEN | M0)}, /* EMMC_DATA7 */ - {SDCARD_CLK, (PTU | IEN | M0)}, /* SDCARD_CLK */ - {SDCARD_CMD, (PTU | IEN | M0)}, /* SDCARD_CMD */ - {SDCARD_DATA0, (PTU | IEN | M0)}, /* SDCARD_DATA0*/ - {SDCARD_DATA1, (PTU | IEN | M0)}, /* SDCARD_DATA1*/ - {SDCARD_DATA2, (PTU | IEN | M0)}, /* SDCARD_DATA2*/ - {SDCARD_DATA3, (PTU | IEN | M0)}, /* SDCARD_DATA3*/ - {UART3_RX_IRRX, (PTU | IEN | M0)}, /* UART3_RX_IRRX */ - {UART3_TX_IRTX, (M0)}, /* UART3_TX_IRTX */ - {USBB1_HSIC_STROBE, (PTU | IEN | M0)}, /* USBB1_HSIC_STROBE */ - {USBB1_HSIC_DATA, (PTU | IEN | M0)}, /* USBB1_HSIC_DATA */ - {USBB2_HSIC_STROBE, (PTU | IEN | M0)}, /* USBB2_HSIC_STROBE */ - {USBB2_HSIC_DATA, (PTU | IEN | M0)}, /* USBB2_HSIC_DATA */ - {USBB3_HSIC_STROBE, (PTU | IEN | M0)}, /* USBB3_HSIC_STROBE*/ - {USBB3_HSIC_DATA, (PTU | IEN | M0)}, /* USBB3_HSIC_DATA */ - {USBD0_HS_DP, (IEN | M0)}, /* USBD0_HS_DP */ - {USBD0_HS_DM, (IEN | M0)}, /* USBD0_HS_DM */ - {USBD0_SS_RX, (IEN | M0)}, /* USBD0_SS_RX */ - {I2C5_SCL, (IEN | M0)}, /* I2C5_SCL */ - {I2C5_SDA, (IEN | M0)}, /* I2C5_SDA */ - {HSI2_ACWAKE, (PTU | M6)}, /* HSI2_ACWAKE */ - {HSI2_CAFLAG, (PTU | M6)}, /* HSI2_CAFLAG */ -}; - -const struct pad_conf_entry wkup_padconf_array_essential[] = { - - {SR_PMIC_SCL, (PTU | IEN | M0)}, /* SR_PMIC_SCL */ - {SR_PMIC_SDA, (PTU | IEN | M0)}, /* SR_PMIC_SDA */ - {SYS_32K, (IEN | M0)}, /* SYS_32K */ - {FREF_CLK1_OUT, (PTD | IEN | M0)}, /* FREF_CLK1_OUT */ - -}; - -#endif /* _EVM4430_MUX_DATA_H */ diff --git a/configs/omap5_uevm_defconfig b/configs/omap5_uevm_defconfig deleted file mode 100644 index 487f7f305c..0000000000 --- a/configs/omap5_uevm_defconfig +++ /dev/null @@ -1,55 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_OMAP2PLUS=y -CONFIG_OMAP54XX=y -CONFIG_TARGET_OMAP5_UEVM=y -CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC=16296 -CONFIG_SPL=y -CONFIG_ENV_OFFSET_REDUND=0x280000 -CONFIG_ARMV7_LPAE=y -CONFIG_SPL_TEXT_BASE=0x40300000 -CONFIG_DISTRO_DEFAULTS=y -# CONFIG_USE_BOOTCOMMAND is not set -CONFIG_SYS_CONSOLE_INFO_QUIET=y -CONFIG_VERSION_VARIABLE=y -# CONFIG_SPL_NAND_SUPPORT is not set -CONFIG_SPL_OS_BOOT=y -CONFIG_CMD_SPL=y -CONFIG_CMD_ASKENV=y -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SPI=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_EXT4_WRITE=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_REDUNDAND_ENVIRONMENT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -CONFIG_SCSI_AHCI=y -CONFIG_DFU_MMC=y -CONFIG_DFU_RAM=y -CONFIG_CMD_TCA642X=y -CONFIG_SUPPORT_EMMC_BOOT=y -CONFIG_MMC_OMAP_HS=y -CONFIG_SCSI=y -CONFIG_CONS_INDEX=3 -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_OMAP3_SPI=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_DWC3=y -CONFIG_USB_DWC3_OMAP=y -CONFIG_USB_DWC3_PHY_OMAP=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" -CONFIG_USB_GADGET_VENDOR_NUM=0x0403 -CONFIG_USB_GADGET_PRODUCT_NUM=0xbd00 -CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_USB_HOST_ETHER=y -CONFIG_USB_ETHER_SMSC95XX=y -CONFIG_FAT_WRITE=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h deleted file mode 100644 index 53589c03ea..0000000000 --- a/include/configs/omap5_uevm.h +++ /dev/null @@ -1,62 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2013 - * Texas Instruments Incorporated. - * Sricharan R - * - * Configuration settings for the TI EVM5430 board. - * See ti_omap5_common.h for omap5 common settings. - */ - -#ifndef __CONFIG_OMAP5_EVM_H -#define __CONFIG_OMAP5_EVM_H - -#include - -#ifndef CONFIG_SPL_BUILD -/* Define the default GPT table for eMMC */ -#define PARTS_DEFAULT \ - "uuid_disk=${uuid_gpt_disk};" \ - "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}" -#endif - -#define DFUARGS \ - "dfu_bufsiz=0x10000\0" \ - DFU_ALT_INFO_MMC \ - DFU_ALT_INFO_EMMC \ - DFU_ALT_INFO_RAM - -#include - -#define CONFIG_SYS_NS16550_COM3 UART3_BASE - -/* MMC ENV related defines */ -#define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */ - -/* Enhance our eMMC support / experience. */ -#define CONFIG_HSMMC2_8BIT - -/* Required support for the TCA642X GPIO we have on the uEVM */ -#define CONFIG_TCA642X -#define CONFIG_SYS_I2C_TCA642X_BUS_NUM 4 -#define CONFIG_SYS_I2C_TCA642X_ADDR 0x22 - -/* USB UHH support options */ -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET - -#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 80 -#define CONFIG_OMAP_EHCI_PHY3_RESET_GPIO 79 - -/* Enabled commands */ - -/* USB Networking options */ - -#define CONSOLEDEV "ttyS2" - -#define CONFIG_SCSI_AHCI_PLAT -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ - CONFIG_SYS_SCSI_MAX_LUN) - -#endif /* __CONFIG_OMAP5_EVM_H */