From patchwork Mon May 25 11:39:51 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Sylwester Nawrocki/Kernel \\\(PLT\\\) /SRPOL/Staff Engineer/Samsung Electronics" X-Patchwork-Id: 246501 List-Id: U-Boot discussion From: s.nawrocki at samsung.com (Sylwester Nawrocki) Date: Mon, 25 May 2020 13:39:51 +0200 Subject: [PATCH v4 1/9] usb: xhci: Add missing cache flush in the scratchpad array initialization In-Reply-To: <20200525113959.11886-1-s.nawrocki@samsung.com> References: <20200525113959.11886-1-s.nawrocki@samsung.com> Message-ID: <20200525113959.11886-2-s.nawrocki@samsung.com> In current code there is no cache flush after initializing the scratchpad buffer array with the scratchpad buffer pointers. This leads to a failure of the "slot enable" command on the rpi4 board (Broadcom STB PCIe controller + VL805 USB hub) - the very first TRB transfer on the command ring fails and there is a timeout while waiting for the command completion event. After adding the missing cache flush everything seems to be working as expected. Signed-off-by: Sylwester Nawrocki Reviewed-by: Bin Meng Reviewed-by: Nicolas Saenz Julienne --- Changes since v1: - none. --- drivers/usb/host/xhci-mem.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 93450ee..729bdc3 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -393,6 +393,9 @@ static int xhci_scratchpad_alloc(struct xhci_ctrl *ctrl) scratchpad->sp_array[i] = cpu_to_le64(ptr); } + xhci_flush_cache((uintptr_t)scratchpad->sp_array, + sizeof(u64) * num_sp); + return 0; fail_sp3: