From patchwork Mon May 25 11:39:59 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Sylwester Nawrocki/Kernel \\\(PLT\\\) /SRPOL/Staff Engineer/Samsung Electronics" X-Patchwork-Id: 246507 List-Id: U-Boot discussion From: s.nawrocki at samsung.com (Sylwester Nawrocki) Date: Mon, 25 May 2020 13:39:59 +0200 Subject: [PATCH v4 9/9] configs: Enable support for the XHCI controller on RPI4 board (ARM 64-bit) In-Reply-To: <20200525113959.11886-1-s.nawrocki@samsung.com> References: <20200525113959.11886-1-s.nawrocki@samsung.com> Message-ID: <20200525113959.11886-10-s.nawrocki@samsung.com> From: Marek Szyprowski This requires enabling BRCMSTB PCIe and XHCI_PCI drivers as well as PCI and USB commands. To get it working one has to call the following commands: "pci enum; usb start;", thus such commands have been added to the default "preboot" environment variable. One has to update their environment if it is already configured to get this feature working out of the box. Signed-off-by: Marek Szyprowski Signed-off-by: Sylwester Nawrocki --- Changes since v3: - added missing rpi_4_defconfig changes Changes since v2: - rpi_4_32b_defconfig, rpi_4_defconfig changes moved to separate patch Changes since v1: - removed unneeded CONFIG_XHCI_64BIT_DWORD_ACCESS_ONLY entry. Changes since RFC: - none. --- configs/rpi_4_defconfig | 9 +++++++++ configs/rpi_arm64_defconfig | 8 +++++++- 2 files changed, 16 insertions(+), 1 deletion(-) diff --git a/configs/rpi_4_defconfig b/configs/rpi_4_defconfig index 6d148da..3f1a1b5 100644 --- a/configs/rpi_4_defconfig +++ b/configs/rpi_4_defconfig @@ -8,6 +8,8 @@ CONFIG_NR_DRAM_BANKS=2 CONFIG_DISTRO_DEFAULTS=y CONFIG_OF_BOARD_SETUP=y # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set +CONFIG_USE_PREBOOT=y +CONFIG_PREBOOT="pci enum; usb start;" CONFIG_MISC_INIT_R=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set @@ -15,6 +17,8 @@ CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_DFU=y CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y +CONFIG_CMD_USB=y CONFIG_CMD_FS_UUID=y CONFIG_OF_BOARD=y CONFIG_ENV_FAT_INTERFACE="mmc" @@ -28,12 +32,17 @@ CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_BCM2835=y CONFIG_DM_ETH=y CONFIG_BCMGENET=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_PCI_BRCMSTB=y CONFIG_PINCTRL=y # CONFIG_PINCTRL_GENERIC is not set # CONFIG_REQUIRE_SERIAL_CONSOLE is not set CONFIG_USB=y CONFIG_DM_USB=y CONFIG_DM_USB_GADGET=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_PCI=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="FSL" CONFIG_USB_GADGET_VENDOR_NUM=0x0525 diff --git a/configs/rpi_arm64_defconfig b/configs/rpi_arm64_defconfig index fea86be..f12d1e3 100644 --- a/configs/rpi_arm64_defconfig +++ b/configs/rpi_arm64_defconfig @@ -7,13 +7,14 @@ CONFIG_NR_DRAM_BANKS=2 CONFIG_DISTRO_DEFAULTS=y CONFIG_OF_BOARD_SETUP=y CONFIG_USE_PREBOOT=y -CONFIG_PREBOOT="usb start" +CONFIG_PREBOOT="pci enum; usb start;" CONFIG_MISC_INIT_R=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y CONFIG_CMD_FS_UUID=y CONFIG_OF_BOARD=y @@ -26,11 +27,16 @@ CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_BCM2835=y CONFIG_DM_ETH=y CONFIG_BCMGENET=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_PCI_BRCMSTB=y CONFIG_PINCTRL=y # CONFIG_PINCTRL_GENERIC is not set # CONFIG_REQUIRE_SERIAL_CONSOLE is not set CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_PCI=y CONFIG_USB_DWC2=y CONFIG_USB_KEYBOARD=y CONFIG_USB_HOST_ETHER=y