From patchwork Mon May 25 10:19:48 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Patrick Delaunay X-Patchwork-Id: 246497 List-Id: U-Boot discussion From: patrick.delaunay at st.com (Patrick Delaunay) Date: Mon, 25 May 2020 12:19:48 +0200 Subject: [PATCH v2 8/9] ARM: dts: stm32mp1: use OPP information for PLL1 settings in SPL In-Reply-To: <20200525101949.15944-1-patrick.delaunay@st.com> References: <20200525101949.15944-1-patrick.delaunay@st.com> Message-ID: <20200525101949.15944-9-patrick.delaunay@st.com> This patch allows to switch the CPU frequency to 800MHz on the ST Microelectronics board (DK1/DK2 and EV1) or dh electronics SOM using the STM32MP15x SOC and when it is supported by the HW (for STM32MP15xD and STM32MP15xF). Signed-off-by: Patrick Delaunay --- Changes in v2: - update stm32mp15xx-dhcor and dhcom device tree arch/arm/dts/stm32mp15-u-boot.dtsi | 10 ++++++++++ arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi | 9 --------- arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi | 9 --------- arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi | 9 --------- arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi | 9 --------- 5 files changed, 10 insertions(+), 36 deletions(-) diff --git a/arch/arm/dts/stm32mp15-u-boot.dtsi b/arch/arm/dts/stm32mp15-u-boot.dtsi index a0d971ad88..66be7df9ae 100644 --- a/arch/arm/dts/stm32mp15-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15-u-boot.dtsi @@ -88,6 +88,16 @@ u-boot,dm-pre-reloc; }; +&cpu0_opp_table { + u-boot,dm-spl; + opp-650000000 { + u-boot,dm-spl; + }; + opp-800000000 { + u-boot,dm-spl; + }; +}; + &gpioa { u-boot,dm-pre-reloc; }; diff --git a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi index c52abeb1e7..69cdae6685 100644 --- a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi @@ -118,15 +118,6 @@ CLK_LPTIM45_LSE >; - /* VCO = 1300.0 MHz => P = 650 (CPU) */ - pll1: st,pll at 0 { - compatible = "st,stm32mp1-pll"; - reg = <0>; - cfg = < 2 80 0 0 0 PQR(1,0,0) >; - frac = < 0x800 >; - u-boot,dm-pre-reloc; - }; - /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */ pll2: st,pll at 1 { compatible = "st,stm32mp1-pll"; diff --git a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi index 84af7fa47b..3f716306be 100644 --- a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi @@ -115,15 +115,6 @@ CLK_LPTIM45_LSE >; - /* VCO = 1300.0 MHz => P = 650 (CPU) */ - pll1: st,pll at 0 { - compatible = "st,stm32mp1-pll"; - reg = <0>; - cfg = < 2 80 0 0 0 PQR(1,0,0) >; - frac = < 0x800 >; - u-boot,dm-pre-reloc; - }; - /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */ pll2: st,pll at 1 { compatible = "st,stm32mp1-pll"; diff --git a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi index 75d75266e8..f96de9e7a3 100644 --- a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi @@ -235,15 +235,6 @@ CLK_LPTIM45_LSE >; - /* VCO = 1300.0 MHz => P = 650 (CPU) */ - pll1: st,pll at 0 { - compatible = "st,stm32mp1-pll"; - reg = <0>; - cfg = < 2 80 0 0 0 PQR(1,0,0) >; - frac = < 0x800 >; - u-boot,dm-pre-reloc; - }; - /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */ pll2: st,pll at 1 { compatible = "st,stm32mp1-pll"; diff --git a/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi index ef730a8322..4059dabf1d 100644 --- a/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi @@ -105,15 +105,6 @@ CLK_LPTIM45_LSE >; - /* VCO = 1300.0 MHz => P = 650 (CPU) */ - pll1: st,pll at 0 { - compatible = "st,stm32mp1-pll"; - reg = <0>; - cfg = < 2 80 0 0 0 PQR(1,0,0) >; - frac = < 0x800 >; - u-boot,dm-pre-reloc; - }; - /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */ pll2: st,pll at 1 { compatible = "st,stm32mp1-pll";