From patchwork Mon May 25 10:19:41 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Patrick Delaunay X-Patchwork-Id: 246488 List-Id: U-Boot discussion From: patrick.delaunay at st.com (Patrick Delaunay) Date: Mon, 25 May 2020 12:19:41 +0200 Subject: [PATCH v2 1/9] arm: stm32mp: spl: add bsec driver in SPL In-Reply-To: <20200525101949.15944-1-patrick.delaunay@st.com> References: <20200525101949.15944-1-patrick.delaunay@st.com> Message-ID: <20200525101949.15944-2-patrick.delaunay@st.com> Add the bsec driver in SPL, as it is needed by SOC part number detection to found the supported OPP. Signed-off-by: Patrick Delaunay Reviewed-by: Patrice Chotard --- Changes in v2: None arch/arm/dts/stm32mp15-u-boot.dtsi | 2 +- arch/arm/mach-stm32mp/Makefile | 2 +- arch/arm/mach-stm32mp/bsec.c | 11 ++++++----- 3 files changed, 8 insertions(+), 7 deletions(-) diff --git a/arch/arm/dts/stm32mp15-u-boot.dtsi b/arch/arm/dts/stm32mp15-u-boot.dtsi index 1279589a56..a0d971ad88 100644 --- a/arch/arm/dts/stm32mp15-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15-u-boot.dtsi @@ -65,7 +65,7 @@ }; &bsec { - u-boot,dm-pre-proper; + u-boot,dm-pre-reloc; }; &clk_csi { diff --git a/arch/arm/mach-stm32mp/Makefile b/arch/arm/mach-stm32mp/Makefile index 66bb8cf92f..c8aa24d489 100644 --- a/arch/arm/mach-stm32mp/Makefile +++ b/arch/arm/mach-stm32mp/Makefile @@ -6,12 +6,12 @@ obj-y += cpu.o obj-y += dram_init.o obj-y += syscon.o +obj-y += bsec.o ifdef CONFIG_SPL_BUILD obj-y += spl.o else obj-$(CONFIG_CMD_STM32PROG) += cmd_stm32prog/ -obj-y += bsec.o obj-$(CONFIG_CMD_STM32KEY) += cmd_stm32key.o obj-$(CONFIG_ARMV7_PSCI) += psci.o obj-$(CONFIG_TFABOOT) += boot_params.o diff --git a/arch/arm/mach-stm32mp/bsec.c b/arch/arm/mach-stm32mp/bsec.c index 0d5850b4a9..98a950c640 100644 --- a/arch/arm/mach-stm32mp/bsec.c +++ b/arch/arm/mach-stm32mp/bsec.c @@ -473,20 +473,23 @@ static int stm32mp_bsec_ofdata_to_platdata(struct udevice *dev) return 0; } -#ifndef CONFIG_TFABOOT static int stm32mp_bsec_probe(struct udevice *dev) { +#if !defined(CONFIG_TFABOOT) && !defined(CONFIG_SPL_BUILD) int otp; struct stm32mp_bsec_platdata *plat = dev_get_platdata(dev); - /* update unlocked shadow for OTP cleared by the rom code */ + /* + * update unlocked shadow for OTP cleared by the rom code + * only executed in U-Boot proper when TF-A is not used + */ for (otp = 57; otp <= BSEC_OTP_MAX_VALUE; otp++) if (!bsec_read_SR_lock(plat->base, otp)) bsec_shadow_register(plat->base, otp); +#endif return 0; } -#endif static const struct udevice_id stm32mp_bsec_ids[] = { { .compatible = "st,stm32mp15-bsec" }, @@ -500,7 +503,5 @@ U_BOOT_DRIVER(stm32mp_bsec) = { .ofdata_to_platdata = stm32mp_bsec_ofdata_to_platdata, .platdata_auto_alloc_size = sizeof(struct stm32mp_bsec_platdata), .ops = &stm32mp_bsec_ops, -#ifndef CONFIG_TFABOOT .probe = stm32mp_bsec_probe, -#endif };