From patchwork Fri May 22 23:24:17 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Anatolij Gustschin X-Patchwork-Id: 246336 List-Id: U-Boot discussion From: agust at denx.de (Anatolij Gustschin) Date: Sat, 23 May 2020 01:24:17 +0200 Subject: [PATCH] tbs2910: migrate to DM_VIDEO Message-ID: <20200522232417.4202-1-agust@denx.de> Migration to DM_VIDEO driver is long overdue, configure it in board config files. To enable the display set stdout like: setenv stdout serial,vidconsole Signed-off-by: Anatolij Gustschin --- This is only build tested. configs/tbs2910_defconfig | 7 ++++++- include/configs/tbs2910.h | 2 -- 2 files changed, 6 insertions(+), 3 deletions(-) diff --git a/configs/tbs2910_defconfig b/configs/tbs2910_defconfig index 2ff0e160f7..b40641c17b 100644 --- a/configs/tbs2910_defconfig +++ b/configs/tbs2910_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_MX6=y CONFIG_SYS_TEXT_BASE=0x17800000 +CONFIG_SYS_MALLOC_F_LEN=0x4000 CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_OFFSET=0x60000 CONFIG_TARGET_TBS2910=y @@ -84,7 +85,11 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_I2C_EDID=y +CONFIG_DM_VIDEO=y +# CONFIG_VIDEO_BPP8 is not set +# CONFIG_VIDEO_BPP32 is not set +# CONFIG_VIDEO_ANSI is not set CONFIG_VIDEO_IPUV3=y -CONFIG_VIDEO=y +CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_OF_LIBFDT_ASSUME_MASK=0xff # CONFIG_EFI_LOADER is not set diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h index 7376b91f55..8ab3fcfe3e 100644 --- a/include/configs/tbs2910.h +++ b/include/configs/tbs2910.h @@ -37,11 +37,9 @@ #define CONFIG_MXC_UART_BASE UART1_BASE /* select UART1/UART2 */ /* Framebuffer */ -#ifdef CONFIG_VIDEO #define CONFIG_VIDEO_BMP_RLE8 #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP -#endif /* PCI */ #ifdef CONFIG_CMD_PCI