[v12,03/21] clk: Unconditionally recursively en-/dis-able clocks

For clocks not in the CCF, their parents will not have UCLASS_CLK, so we
just enable them as normal. The enable count is local to the struct clk,
but this will never result in the actual en-/dis-able op being called
(unless the same struct clk is enabled twice).

For clocks in the CCF, we always traverse up the tree when enabling.
Previously, CCF clocks without id set would be skipped, stopping the
traversal too early.

Signed-off-by: Sean Anderson <seanga2 at gmail.com>
CC: Lukasz Majewski <lukma at denx.de>
---

Changes in v6:
- Fix disable incorrectly recursing into non-clock devices

Changes in v5:
- Clear enable_count on request

Changes in v4:
- Lint

Changes in v3:
- New

 drivers/clk/clk-uclass.c | 60 ++++++++++++++++++----------------------
 1 file changed, 27 insertions(+), 33 deletions(-)

Message ID	20200520191738.337845-4-seanga2@gmail.com
State	Superseded
Headers	show List-Id: U-Boot discussion <u-boot.lists.denx.de> From: seanga2 at gmail.com (Sean Anderson) Date: Wed, 20 May 2020 15:17:20 -0400 Subject: [PATCH v12 03/21] clk: Unconditionally recursively en-/dis-able clocks In-Reply-To: <20200520191738.337845-1-seanga2@gmail.com> References: <20200520191738.337845-1-seanga2@gmail.com> Message-ID: <20200520191738.337845-4-seanga2@gmail.com>
Series	riscv: Add Sipeed Maix support \| expand [v12,00/21] riscv: Add Sipeed Maix support [v12,01/21] clk: Always use the supplied struct clk [v12,02/21] clk: Check that ops of composite clock components exist before calling [v12,03/21] clk: Unconditionally recursively en-/dis-able clocks [v12,04/21] clk: Fix clk_get_by_* handling of index [v12,05/21] clk: Add K210 pll support [v12,06/21] clk: Add a bypass clock for K210 [v12,07/21] clk: Add K210 clock support [v12,08/21] dm: Add support for simple-pm-bus [v12,09/21] dm: Fix error handling for dev_read_addr_ptr [v12,10/21] reset: Add generic reset driver [v12,11/21] lib: Always set errno in hcreate_r [v12,12/21] riscv: Add headers for asm/global_data.h [v12,13/21] riscv: Clear pending interrupts before enabling IPIs [v12,14/21] riscv: Clean up IPI initialization code [v12,15/21] riscv: Add option to support RISC-V privileged spec 1.9 [v12,16/21] riscv: Allow use of reset drivers [v12,17/21] riscv: Try to get cpu frequency from a "clocks" node if it exists [v12,18/21] riscv: Enable cpu clock if it is present [v12,19/21] riscv: Add device tree for K210 and Sipeed Maix BitM [v12,20/21] doc: riscv: Add documentation for Sipeed Maix Bit [v12,21/21] riscv: Add Sipeed Maix support

[v12,03/21] clk: Unconditionally recursively en-/dis-able clocks

Commit Message

Patch