From patchwork Wed May 20 16:40:26 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michael Walle X-Patchwork-Id: 246112 List-Id: U-Boot discussion From: michael at walle.cc (Michael Walle) Date: Wed, 20 May 2020 18:40:26 +0200 Subject: [PATCH v5 2/2] dm: uclass: don't assign aliased seq numbers In-Reply-To: <20200520164026.17993-1-michael@walle.cc> References: <20200520164026.17993-1-michael@walle.cc> Message-ID: <20200520164026.17993-2-michael@walle.cc> If there are aliases for an uclass, set the base for the "dynamically" allocated numbers next to the highest alias. Please note, that this might lead to holes in the sequences, depending on the device tree. For example if there is only an alias "ethernet1", the next device seq number would be 2. In particular this fixes a problem with boards which are using ethernet aliases but also might have network add-in cards like the E1000. If the board is started with the add-in card and depending on the order of the drivers, the E1000 might occupy the first ethernet device and mess up all the hardware addresses, because the devices are now shifted by one. Also adapt the test cases to the new handling and add test cases checking the holes in the seq numbers. Signed-off-by: Michael Walle Reviewed-by: Alex Marginean Tested-by: Alex Marginean Acked-by: Vladimir Oltean Reviewed-by: Simon Glass Tested-by: Michal Simek [on zcu102-revA] --- arch/sandbox/dts/test.dts | 4 ++-- drivers/core/uclass.c | 21 +++++++++++++++------ include/configs/sandbox.h | 6 +++--- test/dm/eth.c | 14 +++++++------- test/dm/test-fdt.c | 22 +++++++++++++++++----- 5 files changed, 44 insertions(+), 23 deletions(-) diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts index 5ce5e28476..37dbd86017 100644 --- a/arch/sandbox/dts/test.dts +++ b/arch/sandbox/dts/test.dts @@ -23,8 +23,8 @@ pci0 = &pci0; pci1 = &pci1; pci2 = &pci2; - remoteproc1 = &rproc_1; - remoteproc2 = &rproc_2; + remoteproc0 = &rproc_1; + remoteproc1 = &rproc_2; rtc0 = &rtc_0; rtc1 = &rtc_1; spi0 = "/spi at 0"; diff --git a/drivers/core/uclass.c b/drivers/core/uclass.c index 2ab419cfe4..c3f1b73cd6 100644 --- a/drivers/core/uclass.c +++ b/drivers/core/uclass.c @@ -689,13 +689,14 @@ int uclass_unbind_device(struct udevice *dev) int uclass_resolve_seq(struct udevice *dev) { + struct uclass *uc = dev->uclass; + struct uclass_driver *uc_drv = uc->uc_drv; struct udevice *dup; - int seq; + int seq = 0; int ret; assert(dev->seq == -1); - ret = uclass_find_device_by_seq(dev->uclass->uc_drv->id, dev->req_seq, - false, &dup); + ret = uclass_find_device_by_seq(uc_drv->id, dev->req_seq, false, &dup); if (!ret) { dm_warn("Device '%s': seq %d is in use by '%s'\n", dev->name, dev->req_seq, dup->name); @@ -707,9 +708,17 @@ int uclass_resolve_seq(struct udevice *dev) return ret; } - for (seq = 0; seq < DM_MAX_SEQ; seq++) { - ret = uclass_find_device_by_seq(dev->uclass->uc_drv->id, seq, - false, &dup); + if (CONFIG_IS_ENABLED(OF_CONTROL) && CONFIG_IS_ENABLED(DM_SEQ_ALIAS) && + (uc_drv->flags & DM_UC_FLAG_SEQ_ALIAS)) { + /* + * dev_read_alias_highest_id() will return -1 if there no + * alias. Thus we can always add one. + */ + seq = dev_read_alias_highest_id(uc_drv->name) + 1; + } + + for (; seq < DM_MAX_SEQ; seq++) { + ret = uclass_find_device_by_seq(uc_drv->id, seq, false, &dup); if (ret == -ENODEV) break; if (ret) diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index 7fda63f71a..4549c81169 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -95,9 +95,9 @@ #endif #define SANDBOX_ETH_SETTINGS "ethaddr=00:00:11:22:33:44\0" \ - "eth1addr=00:00:11:22:33:45\0" \ - "eth3addr=00:00:11:22:33:46\0" \ - "eth5addr=00:00:11:22:33:47\0" \ + "eth3addr=00:00:11:22:33:45\0" \ + "eth5addr=00:00:11:22:33:46\0" \ + "eth6addr=00:00:11:22:33:47\0" \ "ipaddr=1.2.3.4\0" #define MEM_LAYOUT_ENV_SETTINGS \ diff --git a/test/dm/eth.c b/test/dm/eth.c index 1fddcaabb0..b58c9640a2 100644 --- a/test/dm/eth.c +++ b/test/dm/eth.c @@ -48,7 +48,7 @@ static int dm_test_eth_alias(struct unit_test_state *uts) ut_assertok(net_loop(PING)); ut_asserteq_str("eth at 10002000", env_get("ethact")); - env_set("ethact", "eth1"); + env_set("ethact", "eth6"); ut_assertok(net_loop(PING)); ut_asserteq_str("eth at 10004000", env_get("ethact")); @@ -105,7 +105,7 @@ static int dm_test_eth_act(struct unit_test_state *uts) const char *ethname[DM_TEST_ETH_NUM] = {"eth at 10002000", "eth at 10003000", "sbe5", "eth at 10004000"}; const char *addrname[DM_TEST_ETH_NUM] = {"ethaddr", "eth5addr", - "eth3addr", "eth1addr"}; + "eth3addr", "eth6addr"}; char ethaddr[DM_TEST_ETH_NUM][18]; int i; @@ -188,15 +188,15 @@ static int dm_test_eth_rotate(struct unit_test_state *uts) /* Invalidate eth1's MAC address */ memset(ethaddr, '\0', sizeof(ethaddr)); - strncpy(ethaddr, env_get("eth1addr"), 17); - /* Must disable access protection for eth1addr before clearing */ - env_set(".flags", "eth1addr"); - env_set("eth1addr", NULL); + strncpy(ethaddr, env_get("eth6addr"), 17); + /* Must disable access protection for eth6addr before clearing */ + env_set(".flags", "eth6addr"); + env_set("eth6addr", NULL); retval = _dm_test_eth_rotate1(uts); /* Restore the env */ - env_set("eth1addr", ethaddr); + env_set("eth6addr", ethaddr); env_set("ethrotate", NULL); if (!retval) { diff --git a/test/dm/test-fdt.c b/test/dm/test-fdt.c index 4fcae03dc5..51f2547409 100644 --- a/test/dm/test-fdt.c +++ b/test/dm/test-fdt.c @@ -361,20 +361,32 @@ static int dm_test_fdt_uclass_seq(struct unit_test_state *uts) ut_assertok(uclass_get_device(UCLASS_TEST_FDT, 2, &dev)); ut_asserteq_str("d-test", dev->name); - /* d-test actually gets 0 */ - ut_assertok(uclass_get_device_by_seq(UCLASS_TEST_FDT, 0, &dev)); + /* + * d-test actually gets 9, because thats the next free one after the + * aliases. + */ + ut_assertok(uclass_get_device_by_seq(UCLASS_TEST_FDT, 9, &dev)); ut_asserteq_str("d-test", dev->name); - /* initially no one wants seq 1 */ - ut_asserteq(-ENODEV, uclass_get_device_by_seq(UCLASS_TEST_FDT, 1, + /* initially no one wants seq 10 */ + ut_asserteq(-ENODEV, uclass_get_device_by_seq(UCLASS_TEST_FDT, 10, &dev)); ut_assertok(uclass_get_device(UCLASS_TEST_FDT, 0, &dev)); ut_assertok(uclass_get_device(UCLASS_TEST_FDT, 4, &dev)); /* But now that it is probed, we can find it */ - ut_assertok(uclass_get_device_by_seq(UCLASS_TEST_FDT, 1, &dev)); + ut_assertok(uclass_get_device_by_seq(UCLASS_TEST_FDT, 10, &dev)); ut_asserteq_str("f-test", dev->name); + /* + * And we should still have holes in our sequence numbers, that is 2 + * and 4 should not be used. + */ + ut_asserteq(-ENODEV, uclass_find_device_by_seq(UCLASS_TEST_FDT, 2, + true, &dev)); + ut_asserteq(-ENODEV, uclass_find_device_by_seq(UCLASS_TEST_FDT, 4, + true, &dev)); + return 0; } DM_TEST(dm_test_fdt_uclass_seq, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);