diff mbox series

[v1,2/3] board: ns3: kconfig: extend board kconfig with specific commands

Message ID 20200517083257.22191-3-rayagonda.kokatanur@broadcom.com
State New
Headers show
Series add elog support for broadcom NS3 soc | expand

Commit Message

Rayagonda Kokatanur May 17, 2020, 8:32 a.m. UTC
From: Vladimir Olovyannikov <vladimir.olovyannikov at broadcom.com>

Extend Kconfig for the board with board-specific commands selection.

Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov at broadcom.com>
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur at broadcom.com>
---
 board/broadcom/bcmns3/Kconfig | 4 ++++
 1 file changed, 4 insertions(+)

Comments

Simon Glass May 25, 2020, 5:03 p.m. UTC | #1
On Sun, 17 May 2020 at 02:33, Rayagonda Kokatanur
<rayagonda.kokatanur at broadcom.com> wrote:
>
> From: Vladimir Olovyannikov <vladimir.olovyannikov at broadcom.com>
>
> Extend Kconfig for the board with board-specific commands selection.
>
> Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov at broadcom.com>
> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur at broadcom.com>
> ---
>  board/broadcom/bcmns3/Kconfig | 4 ++++
>  1 file changed, 4 insertions(+)

Reviewed-by: Simon Glass <sjg at chromium.org>

Please see below

>
> diff --git a/board/broadcom/bcmns3/Kconfig b/board/broadcom/bcmns3/Kconfig
> index 84daad9415..10547f71de 100644
> --- a/board/broadcom/bcmns3/Kconfig
> +++ b/board/broadcom/bcmns3/Kconfig
> @@ -12,6 +12,10 @@ config SYS_SOC
>  config SYS_CONFIG_NAME
>         default "bcm_ns3"
>
> +config CMD_BCM_EXT_UTILS
> +       bool "Enable Broadcom-specific u-boot commands"

U-Boot

What sort of commands? You could add some details here.


> +       default y
> +
>  config CHIMP_OPTEE
>         bool "Enable secure ChiMP firmware loading"
>         depends on OPTEE
> --
> 2.17.1
>
diff mbox series

Patch

diff --git a/board/broadcom/bcmns3/Kconfig b/board/broadcom/bcmns3/Kconfig
index 84daad9415..10547f71de 100644
--- a/board/broadcom/bcmns3/Kconfig
+++ b/board/broadcom/bcmns3/Kconfig
@@ -12,6 +12,10 @@  config SYS_SOC
 config SYS_CONFIG_NAME
 	default "bcm_ns3"
 
+config CMD_BCM_EXT_UTILS
+	bool "Enable Broadcom-specific u-boot commands"
+	default y
+
 config CHIMP_OPTEE
 	bool "Enable secure ChiMP firmware loading"
 	depends on OPTEE