From patchwork Fri May 15 11:20:16 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Marek Szyprowski X-Patchwork-Id: 245852 List-Id: U-Boot discussion From: m.szyprowski at samsung.com (Marek Szyprowski) Date: Fri, 15 May 2020 13:20:16 +0200 Subject: [RFC PATCH v2 2/2] rpi4: add a mapping for the PCIe XHCI controller MMIO registers (ARM 32bit) In-Reply-To: <20200515112016.24522-1-m.szyprowski@samsung.com> References: <71b88bb9-7bfd-cb33-59b8-052c08ed33fa@suse.com> <20200515112016.24522-1-m.szyprowski@samsung.com> Message-ID: <20200515112016.24522-3-m.szyprowski@samsung.com> Create a non-cacheable mapping for the 0x600000000 physical memory region, where MMIO registers for the PCIe XHCI controller are instantiated by the PCIe bridge. Due to 32bit limit in the CPU virtual address space in ARM 32bit mode, this region is mapped at 0xff800000 CPU virtual address. Signed-off-by: Marek Szyprowski --- arch/arm/mach-bcm283x/Kconfig | 1 + arch/arm/mach-bcm283x/include/mach/base.h | 6 ++++++ arch/arm/mach-bcm283x/init.c | 14 ++++++++++++++ include/configs/rpi.h | 5 +++++ 4 files changed, 26 insertions(+) diff --git a/arch/arm/mach-bcm283x/Kconfig b/arch/arm/mach-bcm283x/Kconfig index 00419bf..bcb7f1d 100644 --- a/arch/arm/mach-bcm283x/Kconfig +++ b/arch/arm/mach-bcm283x/Kconfig @@ -36,6 +36,7 @@ config BCM2711_32B select BCM2711 select ARMV7_LPAE select CPU_V7A + select PHYS_64BIT config BCM2711_64B bool "Broadcom BCM2711 SoC 64-bit support" diff --git a/arch/arm/mach-bcm283x/include/mach/base.h b/arch/arm/mach-bcm283x/include/mach/base.h index c4ae398..1bf89db 100644 --- a/arch/arm/mach-bcm283x/include/mach/base.h +++ b/arch/arm/mach-bcm283x/include/mach/base.h @@ -8,4 +8,10 @@ extern unsigned long rpi_bcm283x_base; +#ifdef CONFIG_ARMV7_LPAE +#include +#define phys_to_virt addrmap_phys_to_virt +#define virt_to_phys addrmap_virt_to_phys +#endif + #endif diff --git a/arch/arm/mach-bcm283x/init.c b/arch/arm/mach-bcm283x/init.c index 6a748da..4b9c831 100644 --- a/arch/arm/mach-bcm283x/init.c +++ b/arch/arm/mach-bcm283x/init.c @@ -145,6 +145,20 @@ int mach_cpu_init(void) } #ifdef CONFIG_ARMV7_LPAE +#define BCM2711_RPI4_PCIE_XHCI_MMIO_VIRT 0xff800000UL +#include + +void init_addr_map(void) +{ + mmu_set_region_dcache_behaviour_phys(BCM2711_RPI4_PCIE_XHCI_MMIO_VIRT, + BCM2711_RPI4_PCIE_XHCI_MMIO_PHYS, + BCM2711_RPI4_PCIE_XHCI_MMIO_SIZE, + DCACHE_OFF); + addrmap_set_entry(BCM2711_RPI4_PCIE_XHCI_MMIO_VIRT, + BCM2711_RPI4_PCIE_XHCI_MMIO_PHYS, + BCM2711_RPI4_PCIE_XHCI_MMIO_SIZE, 0); +} + void enable_caches(void) { dcache_enable(); diff --git a/include/configs/rpi.h b/include/configs/rpi.h index b53a4b6..7da2cff 100644 --- a/include/configs/rpi.h +++ b/include/configs/rpi.h @@ -63,6 +63,11 @@ #define CONFIG_SYS_BOOTM_LEN SZ_64M #endif +#ifdef CONFIG_ARMV7_LPAE +#define CONFIG_ADDR_MAP 1 +#define CONFIG_SYS_NUM_ADDR_MAP 2 +#endif + /* Devices */ /* GPIO */ #define CONFIG_BCM2835_GPIO