| Message ID | 20200514115258.21042-18-pragnesh.patel@sifive.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | RISC-V SiFive FU540 support SPL | expand |
On Thu, May 14, 2020 at 5:24 PM Pragnesh Patel <pragnesh.patel at sifive.com> wrote: > > With sifive_fu540_defconfig: > > User can use FSBL or u-boot-spl.bin anyone at a time. > > For FSBL, > fsbl->fw_payload.bin (opensbi + U-Boot) > > For u-boot-spl.bin, > u-boot-spl.bin->FIT image (opensbi + U-Boot proper + dtb) > > U-Boot SPL will be loaded by ZSBL from SD card (replace fsbl.bin with > u-boot-spl.bin) and runs in L2 LIM in machine mode and then load FIT > image u-boot.itb from SD card into RAM. > > U-Boot SPL expects u-boot.itb FIT image at the starting of SD card sector > number (0x822) of GUID type "2E54B353-1271-4842-806F-E436D6AF6985" > > Signed-off-by: Pragnesh Patel <pragnesh.patel at sifive.com> > Signed-off-by: Jagan Teki <jagan at amarulasolutions.com> > Reviewed-by: Jagan Teki <jagan at amarulasolutions.com> > --- > configs/sifive_fu540_defconfig | 8 ++ > doc/board/sifive/fu540.rst | 134 +++++++++++++++++++++++++++++++++ > 2 files changed, 142 insertions(+) > > diff --git a/configs/sifive_fu540_defconfig b/configs/sifive_fu540_defconfig > index f805aacc7a..8d412f8d6a 100644 > --- a/configs/sifive_fu540_defconfig > +++ b/configs/sifive_fu540_defconfig > @@ -1,6 +1,11 @@ > CONFIG_RISCV=y > +CONFIG_SPL_GPIO_SUPPORT=y > +CONFIG_SYS_MALLOC_F_LEN=0x3000 > CONFIG_ENV_SIZE=0x20000 > +CONFIG_SPL_MMC_SUPPORT=y > CONFIG_NR_DRAM_BANKS=1 > +CONFIG_SPL=y > +CONFIG_SPL_SPI_SUPPORT=y > CONFIG_TARGET_SIFIVE_FU540=y > CONFIG_ARCH_RV64I=y > CONFIG_RISCV_SMODE=y > @@ -9,7 +14,10 @@ CONFIG_FIT=y > CONFIG_MISC_INIT_R=y > CONFIG_DISPLAY_CPUINFO=y > CONFIG_DISPLAY_BOARDINFO=y > +CONFIG_SPL_SEPARATE_BSS=y > +CONFIG_SPL_YMODEM_SUPPORT=y > CONFIG_OF_BOARD_FIXUP=y > CONFIG_DEFAULT_DEVICE_TREE="hifive-unleashed-a00" > CONFIG_SYS_RELOC_GD_ENV_ADDR=y > +CONFIG_SPL_CLK=y > CONFIG_DM_MTD=y > diff --git a/doc/board/sifive/fu540.rst b/doc/board/sifive/fu540.rst > index 610ba87074..89e8d66c56 100644 > --- a/doc/board/sifive/fu540.rst > +++ b/doc/board/sifive/fu540.rst > @@ -31,6 +31,9 @@ TODO: > stdout-path = "/soc/serial at 10010000:115200"; > }; > > +Booting from MMC using FSBL > +--------------------------- > + > Building > -------- > > @@ -421,3 +424,134 @@ as well. > > Please press Enter to activate this console. > / # > + > +Booting from MMC using U-Boot SPL > +--------------------------------- > + > +Building > +-------- > + > +Before building U-Boot SPL, OpenSBI must be built first. OpenSBI can be > +cloned and built for FU540 as below: > + > +.. code-block:: console > + > + git clone https://github.com/riscv/opensbi.git > + cd opensbi > + make PLATFORM=generic FW_DYNAMIC=y > + > +Copy OpenSBI FW_DYNAMIC image > +(build/platform/generic/firmware/fw_dynamic.bin) into U-Boot > +root directory > + > +.. code-block:: console > + > + cp build/platform/generic/firmware/fw_dynamic.bin <u-boot-dir> > + > +Now build the U-Boot SPL and U-Boot proper > + > +.. code-block:: console > + > + cd <U-Boot-dir> > + make sifive_fu540_defconfig > + make > + > +This will generate spl/u-boot-spl.bin and FIT image (u-boot.itb) > + > + > +Flashing > +-------- > + > +ZSBL loads the U-Boot SPL (u-boot-spl.bin) from a partition with GUID type > +5B193300-FC78-40CD-8002-E86C45580B47 > + > +U-Boot SPL expects a U-Boot FIT image (u-boot.itb) from a partition with GUID > +type 2E54B353-1271-4842-806F-E436D6AF6985 > + > +FIT image (u-boot.itb) is a combination of fw_dynamic.bin, u-boot-nodtb.bin and > +device tree blob (hifive-unleashed-a00.dtb) > + > +Format the SD card (make sure the disk has GPT, otherwise use gdisk to switch) > + > +.. code-block:: none > + > + # sudo sgdisk --clear \ > + > --set-alignment=2 \ > + > --new=1:34:2081 --change-name=1:loader1 --typecode=1:5B193300-FC78-40CD-8002-E86C45580B47 \ > + > --new=2:2082:10273 --change-name=2:loader2 --typecode=2:2E54B353-1271-4842-806F-E436D6AF6985 \ > + > --new=3:10274: --change-name=3:rootfs --typecode=3:0FC63DAF-8483-4772-8E79-3D69D8477DE4 \ > + > /dev/sda > + > +Program the SD card > + > +.. code-block:: none > + > + sudo dd if=spl/u-boot-spl.bin of=/dev/sda seek=34 > + sudo dd if=u-boot.itb of=/dev/sda seek=2082 > + > +Booting > +------- > +Once you plugin the sdcard and power up, you should see the U-Boot prompt. > + > +Sample boot log from HiFive Unleashed board > +------------------------------------------- > + > +.. code-block:: none > + > + U-Boot SPL 2020.04-rc2-00109-g63efc7e07e-dirty (Apr 30 2020 - 13:52:36 +0530) > + Trying to boot from MMC1 > + > + > + U-Boot 2020.04-rc2-00109-g63efc7e07e-dirty (Apr 30 2020 - 13:52:36 +0530) > + > + CPU: rv64imafdc > + Model: SiFive HiFive Unleashed A00 > + DRAM: 8 GiB > + MMC: spi at 10050000:mmc at 0: 0 > + In: serial at 10010000 > + Out: serial at 10010000 > + Err: serial at 10010000 > + Board serial number should not be 0 !! > + Net: > + Warning: ethernet at 10090000 (eth0) using random MAC address - 96:06:92:18:eb:04 > + eth0: ethernet at 10090000 > + Hit any key to stop autoboot: 0 Look like v10 seems to be a change, I can see memory region print? U-Boot SPL 2020.07-rc1-00540-gd06cdf6989 (May 15 2020 - 23:00:17 +0530) Trying to boot from MMC1 U-Boot 2020.07-rc1-00540-gd06cdf6989 (May 15 2020 - 23:00:17 +0530) CPU: rv64imafdc Model: SiFive HiFive Unleashed A00 DRAM: 8 GiB No reserved memory region found in source FDT MMC: spi at 10050000:mmc at 0: 0 In: serial at 10010000 Out: serial at 10010000 Err: serial at 10010000 Net: eth0: ethernet at 10090000 Hit any key to stop autoboot: 0 Jagan.
Hi Jagan, >-----Original Message----- >From: Jagan Teki <jagan at amarulasolutions.com> >Sent: 15 May 2020 23:05 >To: Pragnesh Patel <pragnesh.patel at sifive.com> >Cc: U-Boot-Denx <u-boot at lists.denx.de>; Atish Patra ><atish.patra at wdc.com>; Palmer Dabbelt <palmerdabbelt at google.com>; Bin >Meng <bmeng.cn at gmail.com>; Paul Walmsley <paul.walmsley at sifive.com>; >Anup Patel <anup.patel at wdc.com>; Sagar Kadam ><sagar.kadam at sifive.com>; Rick Chen <rick at andestech.com>; Palmer >Dabbelt <palmer at dabbelt.com> >Subject: Re: [PATCH v10 17/18] configs: fu540: Add config options for U-Boot >SPL > >[External Email] Do not click links or attachments unless you recognize the >sender and know the content is safe > >On Thu, May 14, 2020 at 5:24 PM Pragnesh Patel ><pragnesh.patel at sifive.com> wrote: >> >> With sifive_fu540_defconfig: >> >> User can use FSBL or u-boot-spl.bin anyone at a time. >> >> For FSBL, >> fsbl->fw_payload.bin (opensbi + U-Boot) >> >> For u-boot-spl.bin, >> u-boot-spl.bin->FIT image (opensbi + U-Boot proper + dtb) >> >> U-Boot SPL will be loaded by ZSBL from SD card (replace fsbl.bin with >> u-boot-spl.bin) and runs in L2 LIM in machine mode and then load FIT >> image u-boot.itb from SD card into RAM. >> >> U-Boot SPL expects u-boot.itb FIT image at the starting of SD card >> sector number (0x822) of GUID type "2E54B353-1271-4842-806F- >E436D6AF6985" >> >> Signed-off-by: Pragnesh Patel <pragnesh.patel at sifive.com> >> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com> >> Reviewed-by: Jagan Teki <jagan at amarulasolutions.com> >> --- >> configs/sifive_fu540_defconfig | 8 ++ >> doc/board/sifive/fu540.rst | 134 +++++++++++++++++++++++++++++++++ >> 2 files changed, 142 insertions(+) >> >> diff --git a/configs/sifive_fu540_defconfig >> b/configs/sifive_fu540_defconfig index f805aacc7a..8d412f8d6a 100644 >> --- a/configs/sifive_fu540_defconfig >> +++ b/configs/sifive_fu540_defconfig >> @@ -1,6 +1,11 @@ >> CONFIG_RISCV=y >> +CONFIG_SPL_GPIO_SUPPORT=y >> +CONFIG_SYS_MALLOC_F_LEN=0x3000 >> CONFIG_ENV_SIZE=0x20000 >> +CONFIG_SPL_MMC_SUPPORT=y >> CONFIG_NR_DRAM_BANKS=1 >> +CONFIG_SPL=y >> +CONFIG_SPL_SPI_SUPPORT=y >> CONFIG_TARGET_SIFIVE_FU540=y >> CONFIG_ARCH_RV64I=y >> CONFIG_RISCV_SMODE=y >> @@ -9,7 +14,10 @@ CONFIG_FIT=y >> CONFIG_MISC_INIT_R=y >> CONFIG_DISPLAY_CPUINFO=y >> CONFIG_DISPLAY_BOARDINFO=y >> +CONFIG_SPL_SEPARATE_BSS=y >> +CONFIG_SPL_YMODEM_SUPPORT=y >> CONFIG_OF_BOARD_FIXUP=y >> CONFIG_DEFAULT_DEVICE_TREE="hifive-unleashed-a00" >> CONFIG_SYS_RELOC_GD_ENV_ADDR=y >> +CONFIG_SPL_CLK=y >> CONFIG_DM_MTD=y >> diff --git a/doc/board/sifive/fu540.rst b/doc/board/sifive/fu540.rst >> index 610ba87074..89e8d66c56 100644 >> --- a/doc/board/sifive/fu540.rst >> +++ b/doc/board/sifive/fu540.rst >> @@ -31,6 +31,9 @@ TODO: >> stdout-path = "/soc/serial at 10010000:115200"; >> }; >> >> +Booting from MMC using FSBL >> +--------------------------- >> + >> Building >> -------- >> >> @@ -421,3 +424,134 @@ as well. >> >> Please press Enter to activate this console. >> / # >> + >> +Booting from MMC using U-Boot SPL >> +--------------------------------- >> + >> +Building >> +-------- >> + >> +Before building U-Boot SPL, OpenSBI must be built first. OpenSBI can >> +be cloned and built for FU540 as below: >> + >> +.. code-block:: console >> + >> + git clone https://github.com/riscv/opensbi.git >> + cd opensbi >> + make PLATFORM=generic FW_DYNAMIC=y >> + >> +Copy OpenSBI FW_DYNAMIC image >> +(build/platform/generic/firmware/fw_dynamic.bin) into U-Boot root >> +directory >> + >> +.. code-block:: console >> + >> + cp build/platform/generic/firmware/fw_dynamic.bin <u-boot-dir> >> + >> +Now build the U-Boot SPL and U-Boot proper >> + >> +.. code-block:: console >> + >> + cd <U-Boot-dir> >> + make sifive_fu540_defconfig >> + make >> + >> +This will generate spl/u-boot-spl.bin and FIT image (u-boot.itb) >> + >> + >> +Flashing >> +-------- >> + >> +ZSBL loads the U-Boot SPL (u-boot-spl.bin) from a partition with GUID >> +type >> +5B193300-FC78-40CD-8002-E86C45580B47 >> + >> +U-Boot SPL expects a U-Boot FIT image (u-boot.itb) from a partition >> +with GUID type 2E54B353-1271-4842-806F-E436D6AF6985 >> + >> +FIT image (u-boot.itb) is a combination of fw_dynamic.bin, >> +u-boot-nodtb.bin and device tree blob (hifive-unleashed-a00.dtb) >> + >> +Format the SD card (make sure the disk has GPT, otherwise use gdisk >> +to switch) >> + >> +.. code-block:: none >> + >> + # sudo sgdisk --clear \ >> + > --set-alignment=2 \ >> + > --new=1:34:2081 --change-name=1:loader1 --typecode=1:5B193300- >FC78-40CD-8002-E86C45580B47 \ >> + > --new=2:2082:10273 --change-name=2:loader2 -- >typecode=2:2E54B353-1271-4842-806F-E436D6AF6985 \ >> + > --new=3:10274: --change-name=3:rootfs --typecode=3:0FC63DAF- >8483-4772-8E79-3D69D8477DE4 \ >> + > /dev/sda >> + >> +Program the SD card >> + >> +.. code-block:: none >> + >> + sudo dd if=spl/u-boot-spl.bin of=/dev/sda seek=34 >> + sudo dd if=u-boot.itb of=/dev/sda seek=2082 >> + >> +Booting >> +------- >> +Once you plugin the sdcard and power up, you should see the U-Boot >prompt. >> + >> +Sample boot log from HiFive Unleashed board >> +------------------------------------------- >> + >> +.. code-block:: none >> + >> + U-Boot SPL 2020.04-rc2-00109-g63efc7e07e-dirty (Apr 30 2020 - >13:52:36 +0530) >> + Trying to boot from MMC1 >> + >> + >> + U-Boot 2020.04-rc2-00109-g63efc7e07e-dirty (Apr 30 2020 - >> + 13:52:36 +0530) >> + >> + CPU: rv64imafdc >> + Model: SiFive HiFive Unleashed A00 >> + DRAM: 8 GiB >> + MMC: spi at 10050000:mmc at 0: 0 >> + In: serial at 10010000 >> + Out: serial at 10010000 >> + Err: serial at 10010000 >> + Board serial number should not be 0 !! >> + Net: >> + Warning: ethernet at 10090000 (eth0) using random MAC address - >96:06:92:18:eb:04 >> + eth0: ethernet at 10090000 >> + Hit any key to stop autoboot: 0 > >Look like v10 seems to be a change, I can see memory region print? > >U-Boot SPL 2020.07-rc1-00540-gd06cdf6989 (May 15 2020 - 23:00:17 >+0530) >Trying to boot from MMC1 > > >U-Boot 2020.07-rc1-00540-gd06cdf6989 (May 15 2020 - 23:00:17 +0530) > >CPU: rv64imafdc >Model: SiFive HiFive Unleashed A00 >DRAM: 8 GiB >No reserved memory region found in source FDT >MMC: spi at 10050000:mmc at 0: 0 >In: serial at 10010000 >Out: serial at 10010000 >Err: serial at 10010000 >Net: eth0: ethernet at 10090000 >Hit any key to stop autoboot: 0 I haven't got this "memory region" print, can you please update your U-Boot and OpenSBI Repo and recheck. U-Boot SPL 2020.07-rc2-00681-gcbf8ba388d (May 16 2020 - 11:36:52 +0530) Trying to boot from MMC1 U-Boot 2020.07-rc2-00681-gcbf8ba388d (May 16 2020 - 11:36:52 +0530) CPU: rv64imafdc Model: SiFive HiFive Unleashed A00 DRAM: 8 GiB MMC: spi at 10050000:mmc at 0: 0 In: serial at 10010000 Out: serial at 10010000 Err: serial at 10010000 Board serial number should not be 0 !! Net: Warning: ethernet at 10090000 (eth0) using random MAC address - 22:48:01:00:fc:6c eth0: ethernet at 10090000 Hit any key to stop autoboot: 0 => > >Jagan.
Hi Pragnesh, On Thu, May 14, 2020 at 7:54 PM Pragnesh Patel <pragnesh.patel at sifive.com> wrote: > > With sifive_fu540_defconfig: > > User can use FSBL or u-boot-spl.bin anyone at a time. > > For FSBL, > fsbl->fw_payload.bin (opensbi + U-Boot) > > For u-boot-spl.bin, > u-boot-spl.bin->FIT image (opensbi + U-Boot proper + dtb) > > U-Boot SPL will be loaded by ZSBL from SD card (replace fsbl.bin with > u-boot-spl.bin) and runs in L2 LIM in machine mode and then load FIT > image u-boot.itb from SD card into RAM. > > U-Boot SPL expects u-boot.itb FIT image at the starting of SD card sector > number (0x822) of GUID type "2E54B353-1271-4842-806F-E436D6AF6985" > > Signed-off-by: Pragnesh Patel <pragnesh.patel at sifive.com> > Signed-off-by: Jagan Teki <jagan at amarulasolutions.com> > Reviewed-by: Jagan Teki <jagan at amarulasolutions.com> > --- > configs/sifive_fu540_defconfig | 8 ++ > doc/board/sifive/fu540.rst | 134 +++++++++++++++++++++++++++++++++ > 2 files changed, 142 insertions(+) > > diff --git a/configs/sifive_fu540_defconfig b/configs/sifive_fu540_defconfig > index f805aacc7a..8d412f8d6a 100644 > --- a/configs/sifive_fu540_defconfig > +++ b/configs/sifive_fu540_defconfig > @@ -1,6 +1,11 @@ > CONFIG_RISCV=y > +CONFIG_SPL_GPIO_SUPPORT=y > +CONFIG_SYS_MALLOC_F_LEN=0x3000 > CONFIG_ENV_SIZE=0x20000 > +CONFIG_SPL_MMC_SUPPORT=y > CONFIG_NR_DRAM_BANKS=1 > +CONFIG_SPL=y > +CONFIG_SPL_SPI_SUPPORT=y > CONFIG_TARGET_SIFIVE_FU540=y > CONFIG_ARCH_RV64I=y > CONFIG_RISCV_SMODE=y > @@ -9,7 +14,10 @@ CONFIG_FIT=y > CONFIG_MISC_INIT_R=y > CONFIG_DISPLAY_CPUINFO=y > CONFIG_DISPLAY_BOARDINFO=y > +CONFIG_SPL_SEPARATE_BSS=y > +CONFIG_SPL_YMODEM_SUPPORT=y > CONFIG_OF_BOARD_FIXUP=y > CONFIG_DEFAULT_DEVICE_TREE="hifive-unleashed-a00" > CONFIG_SYS_RELOC_GD_ENV_ADDR=y > +CONFIG_SPL_CLK=y > CONFIG_DM_MTD=y > diff --git a/doc/board/sifive/fu540.rst b/doc/board/sifive/fu540.rst > index 610ba87074..89e8d66c56 100644 > --- a/doc/board/sifive/fu540.rst > +++ b/doc/board/sifive/fu540.rst > @@ -31,6 +31,9 @@ TODO: > stdout-path = "/soc/serial at 10010000:115200"; > }; > > +Booting from MMC using FSBL > +--------------------------- > + > Building > -------- > > @@ -421,3 +424,134 @@ as well. > > Please press Enter to activate this console. > / # > + > +Booting from MMC using U-Boot SPL > +--------------------------------- > + > +Building > +-------- > + > +Before building U-Boot SPL, OpenSBI must be built first. OpenSBI can be > +cloned and built for FU540 as below: > + > +.. code-block:: console > + > + git clone https://github.com/riscv/opensbi.git > + cd opensbi > + make PLATFORM=generic FW_DYNAMIC=y > + > +Copy OpenSBI FW_DYNAMIC image > +(build/platform/generic/firmware/fw_dynamic.bin) into U-Boot > +root directory > + > +.. code-block:: console > + > + cp build/platform/generic/firmware/fw_dynamic.bin <u-boot-dir> > + > +Now build the U-Boot SPL and U-Boot proper > + > +.. code-block:: console > + > + cd <U-Boot-dir> > + make sifive_fu540_defconfig > + make > + > +This will generate spl/u-boot-spl.bin and FIT image (u-boot.itb) > + > + > +Flashing > +-------- > + > +ZSBL loads the U-Boot SPL (u-boot-spl.bin) from a partition with GUID type > +5B193300-FC78-40CD-8002-E86C45580B47 > + > +U-Boot SPL expects a U-Boot FIT image (u-boot.itb) from a partition with GUID > +type 2E54B353-1271-4842-806F-E436D6AF6985 > + > +FIT image (u-boot.itb) is a combination of fw_dynamic.bin, u-boot-nodtb.bin and > +device tree blob (hifive-unleashed-a00.dtb) > + > +Format the SD card (make sure the disk has GPT, otherwise use gdisk to switch) > + > +.. code-block:: none > + > + # sudo sgdisk --clear \ > + > --set-alignment=2 \ > + > --new=1:34:2081 --change-name=1:loader1 --typecode=1:5B193300-FC78-40CD-8002-E86C45580B47 \ > + > --new=2:2082:10273 --change-name=2:loader2 --typecode=2:2E54B353-1271-4842-806F-E436D6AF6985 \ > + > --new=3:10274: --change-name=3:rootfs --typecode=3:0FC63DAF-8483-4772-8E79-3D69D8477DE4 \ The LBAs in this command do not match what is proposed in this patch: http://patchwork.ozlabs.org/project/uboot/patch/20200514115258.21042-16-pragnesh.patel at sifive.com/ > + > /dev/sda > + > +Program the SD card > + > +.. code-block:: none > + > + sudo dd if=spl/u-boot-spl.bin of=/dev/sda seek=34 > + sudo dd if=u-boot.itb of=/dev/sda seek=2082 ditto Regards, Bin
Hi Bin, >-----Original Message----- >From: Bin Meng <bmeng.cn at gmail.com> >Sent: 17 May 2020 18:28 >To: Pragnesh Patel <pragnesh.patel at sifive.com> >Cc: U-Boot Mailing List <u-boot at lists.denx.de>; Atish Patra ><atish.patra at wdc.com>; Palmer Dabbelt <palmerdabbelt at google.com>; Paul >Walmsley <paul.walmsley at sifive.com>; Jagan Teki ><jagan at amarulasolutions.com>; Anup Patel <anup.patel at wdc.com>; Sagar >Kadam <sagar.kadam at sifive.com>; Rick Chen <rick at andestech.com>; Palmer >Dabbelt <palmer at dabbelt.com> >Subject: Re: [PATCH v10 17/18] configs: fu540: Add config options for U-Boot >SPL > >[External Email] Do not click links or attachments unless you recognize the >sender and know the content is safe > >Hi Pragnesh, > >On Thu, May 14, 2020 at 7:54 PM Pragnesh Patel ><pragnesh.patel at sifive.com> wrote: >> >> With sifive_fu540_defconfig: >> >> User can use FSBL or u-boot-spl.bin anyone at a time. >> >> For FSBL, >> fsbl->fw_payload.bin (opensbi + U-Boot) >> >> For u-boot-spl.bin, >> u-boot-spl.bin->FIT image (opensbi + U-Boot proper + dtb) >> >> U-Boot SPL will be loaded by ZSBL from SD card (replace fsbl.bin with >> u-boot-spl.bin) and runs in L2 LIM in machine mode and then load FIT >> image u-boot.itb from SD card into RAM. >> >> U-Boot SPL expects u-boot.itb FIT image at the starting of SD card >> sector number (0x822) of GUID type "2E54B353-1271-4842-806F- >E436D6AF6985" >> >> Signed-off-by: Pragnesh Patel <pragnesh.patel at sifive.com> >> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com> >> Reviewed-by: Jagan Teki <jagan at amarulasolutions.com> >> --- >> configs/sifive_fu540_defconfig | 8 ++ >> doc/board/sifive/fu540.rst | 134 +++++++++++++++++++++++++++++++++ >> 2 files changed, 142 insertions(+) >> >> diff --git a/configs/sifive_fu540_defconfig >> b/configs/sifive_fu540_defconfig index f805aacc7a..8d412f8d6a 100644 >> --- a/configs/sifive_fu540_defconfig >> +++ b/configs/sifive_fu540_defconfig >> @@ -1,6 +1,11 @@ >> CONFIG_RISCV=y >> +CONFIG_SPL_GPIO_SUPPORT=y >> +CONFIG_SYS_MALLOC_F_LEN=0x3000 >> CONFIG_ENV_SIZE=0x20000 >> +CONFIG_SPL_MMC_SUPPORT=y >> CONFIG_NR_DRAM_BANKS=1 >> +CONFIG_SPL=y >> +CONFIG_SPL_SPI_SUPPORT=y >> CONFIG_TARGET_SIFIVE_FU540=y >> CONFIG_ARCH_RV64I=y >> CONFIG_RISCV_SMODE=y >> @@ -9,7 +14,10 @@ CONFIG_FIT=y >> CONFIG_MISC_INIT_R=y >> CONFIG_DISPLAY_CPUINFO=y >> CONFIG_DISPLAY_BOARDINFO=y >> +CONFIG_SPL_SEPARATE_BSS=y >> +CONFIG_SPL_YMODEM_SUPPORT=y >> CONFIG_OF_BOARD_FIXUP=y >> CONFIG_DEFAULT_DEVICE_TREE="hifive-unleashed-a00" >> CONFIG_SYS_RELOC_GD_ENV_ADDR=y >> +CONFIG_SPL_CLK=y >> CONFIG_DM_MTD=y >> diff --git a/doc/board/sifive/fu540.rst b/doc/board/sifive/fu540.rst >> index 610ba87074..89e8d66c56 100644 >> --- a/doc/board/sifive/fu540.rst >> +++ b/doc/board/sifive/fu540.rst >> @@ -31,6 +31,9 @@ TODO: >> stdout-path = "/soc/serial at 10010000:115200"; >> }; >> >> +Booting from MMC using FSBL >> +--------------------------- >> + >> Building >> -------- >> >> @@ -421,3 +424,134 @@ as well. >> >> Please press Enter to activate this console. >> / # >> + >> +Booting from MMC using U-Boot SPL >> +--------------------------------- >> + >> +Building >> +-------- >> + >> +Before building U-Boot SPL, OpenSBI must be built first. OpenSBI can >> +be cloned and built for FU540 as below: >> + >> +.. code-block:: console >> + >> + git clone https://github.com/riscv/opensbi.git >> + cd opensbi >> + make PLATFORM=generic FW_DYNAMIC=y >> + >> +Copy OpenSBI FW_DYNAMIC image >> +(build/platform/generic/firmware/fw_dynamic.bin) into U-Boot root >> +directory >> + >> +.. code-block:: console >> + >> + cp build/platform/generic/firmware/fw_dynamic.bin <u-boot-dir> >> + >> +Now build the U-Boot SPL and U-Boot proper >> + >> +.. code-block:: console >> + >> + cd <U-Boot-dir> >> + make sifive_fu540_defconfig >> + make >> + >> +This will generate spl/u-boot-spl.bin and FIT image (u-boot.itb) >> + >> + >> +Flashing >> +-------- >> + >> +ZSBL loads the U-Boot SPL (u-boot-spl.bin) from a partition with GUID >> +type >> +5B193300-FC78-40CD-8002-E86C45580B47 >> + >> +U-Boot SPL expects a U-Boot FIT image (u-boot.itb) from a partition >> +with GUID type 2E54B353-1271-4842-806F-E436D6AF6985 >> + >> +FIT image (u-boot.itb) is a combination of fw_dynamic.bin, >> +u-boot-nodtb.bin and device tree blob (hifive-unleashed-a00.dtb) >> + >> +Format the SD card (make sure the disk has GPT, otherwise use gdisk >> +to switch) >> + >> +.. code-block:: none >> + >> + # sudo sgdisk --clear \ >> + > --set-alignment=2 \ >> + > --new=1:34:2081 --change-name=1:loader1 --typecode=1:5B193300- >FC78-40CD-8002-E86C45580B47 \ >> + > --new=2:2082:10273 --change-name=2:loader2 -- >typecode=2:2E54B353-1271-4842-806F-E436D6AF6985 \ >> + > --new=3:10274: --change-name=3:rootfs >> + --typecode=3:0FC63DAF-8483-4772-8E79-3D69D8477DE4 \ > >The LBAs in this command do not match what is proposed in this patch: > >http://patchwork.ozlabs.org/project/uboot/patch/20200514115258.21042- >16-pragnesh.patel at sifive.com/ I think the LBAs are in decimal here in this patch and hex in the proposed patch. > >> + > /dev/sda >> + >> +Program the SD card >> + >> +.. code-block:: none >> + >> + sudo dd if=spl/u-boot-spl.bin of=/dev/sda seek=34 >> + sudo dd if=u-boot.itb of=/dev/sda seek=2082 > >ditto Same as above. > >Regards, >Bin
Hi Pragnesh, On Sun, May 17, 2020 at 10:37 PM Pragnesh Patel <pragnesh.patel at sifive.com> wrote: > > Hi Bin, > > >-----Original Message----- > >From: Bin Meng <bmeng.cn at gmail.com> > >Sent: 17 May 2020 18:28 > >To: Pragnesh Patel <pragnesh.patel at sifive.com> > >Cc: U-Boot Mailing List <u-boot at lists.denx.de>; Atish Patra > ><atish.patra at wdc.com>; Palmer Dabbelt <palmerdabbelt at google.com>; Paul > >Walmsley <paul.walmsley at sifive.com>; Jagan Teki > ><jagan at amarulasolutions.com>; Anup Patel <anup.patel at wdc.com>; Sagar > >Kadam <sagar.kadam at sifive.com>; Rick Chen <rick at andestech.com>; Palmer > >Dabbelt <palmer at dabbelt.com> > >Subject: Re: [PATCH v10 17/18] configs: fu540: Add config options for U-Boot > >SPL > > > >[External Email] Do not click links or attachments unless you recognize the > >sender and know the content is safe > > > >Hi Pragnesh, > > > >On Thu, May 14, 2020 at 7:54 PM Pragnesh Patel > ><pragnesh.patel at sifive.com> wrote: > >> > >> With sifive_fu540_defconfig: > >> > >> User can use FSBL or u-boot-spl.bin anyone at a time. > >> > >> For FSBL, > >> fsbl->fw_payload.bin (opensbi + U-Boot) > >> > >> For u-boot-spl.bin, > >> u-boot-spl.bin->FIT image (opensbi + U-Boot proper + dtb) > >> > >> U-Boot SPL will be loaded by ZSBL from SD card (replace fsbl.bin with > >> u-boot-spl.bin) and runs in L2 LIM in machine mode and then load FIT > >> image u-boot.itb from SD card into RAM. > >> > >> U-Boot SPL expects u-boot.itb FIT image at the starting of SD card > >> sector number (0x822) of GUID type "2E54B353-1271-4842-806F- > >E436D6AF6985" > >> > >> Signed-off-by: Pragnesh Patel <pragnesh.patel at sifive.com> > >> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com> > >> Reviewed-by: Jagan Teki <jagan at amarulasolutions.com> > >> --- > >> configs/sifive_fu540_defconfig | 8 ++ > >> doc/board/sifive/fu540.rst | 134 +++++++++++++++++++++++++++++++++ > >> 2 files changed, 142 insertions(+) > >> > >> diff --git a/configs/sifive_fu540_defconfig > >> b/configs/sifive_fu540_defconfig index f805aacc7a..8d412f8d6a 100644 > >> --- a/configs/sifive_fu540_defconfig > >> +++ b/configs/sifive_fu540_defconfig > >> @@ -1,6 +1,11 @@ > >> CONFIG_RISCV=y > >> +CONFIG_SPL_GPIO_SUPPORT=y > >> +CONFIG_SYS_MALLOC_F_LEN=0x3000 > >> CONFIG_ENV_SIZE=0x20000 > >> +CONFIG_SPL_MMC_SUPPORT=y > >> CONFIG_NR_DRAM_BANKS=1 > >> +CONFIG_SPL=y > >> +CONFIG_SPL_SPI_SUPPORT=y > >> CONFIG_TARGET_SIFIVE_FU540=y > >> CONFIG_ARCH_RV64I=y > >> CONFIG_RISCV_SMODE=y > >> @@ -9,7 +14,10 @@ CONFIG_FIT=y > >> CONFIG_MISC_INIT_R=y > >> CONFIG_DISPLAY_CPUINFO=y > >> CONFIG_DISPLAY_BOARDINFO=y > >> +CONFIG_SPL_SEPARATE_BSS=y > >> +CONFIG_SPL_YMODEM_SUPPORT=y > >> CONFIG_OF_BOARD_FIXUP=y > >> CONFIG_DEFAULT_DEVICE_TREE="hifive-unleashed-a00" > >> CONFIG_SYS_RELOC_GD_ENV_ADDR=y > >> +CONFIG_SPL_CLK=y > >> CONFIG_DM_MTD=y > >> diff --git a/doc/board/sifive/fu540.rst b/doc/board/sifive/fu540.rst > >> index 610ba87074..89e8d66c56 100644 > >> --- a/doc/board/sifive/fu540.rst > >> +++ b/doc/board/sifive/fu540.rst > >> @@ -31,6 +31,9 @@ TODO: > >> stdout-path = "/soc/serial at 10010000:115200"; > >> }; > >> > >> +Booting from MMC using FSBL > >> +--------------------------- > >> + > >> Building > >> -------- > >> > >> @@ -421,3 +424,134 @@ as well. > >> > >> Please press Enter to activate this console. > >> / # > >> + > >> +Booting from MMC using U-Boot SPL > >> +--------------------------------- > >> + > >> +Building > >> +-------- > >> + > >> +Before building U-Boot SPL, OpenSBI must be built first. OpenSBI can > >> +be cloned and built for FU540 as below: > >> + > >> +.. code-block:: console > >> + > >> + git clone https://github.com/riscv/opensbi.git > >> + cd opensbi > >> + make PLATFORM=generic FW_DYNAMIC=y > >> + > >> +Copy OpenSBI FW_DYNAMIC image > >> +(build/platform/generic/firmware/fw_dynamic.bin) into U-Boot root > >> +directory > >> + > >> +.. code-block:: console > >> + > >> + cp build/platform/generic/firmware/fw_dynamic.bin <u-boot-dir> > >> + > >> +Now build the U-Boot SPL and U-Boot proper > >> + > >> +.. code-block:: console > >> + > >> + cd <U-Boot-dir> > >> + make sifive_fu540_defconfig > >> + make > >> + > >> +This will generate spl/u-boot-spl.bin and FIT image (u-boot.itb) > >> + > >> + > >> +Flashing > >> +-------- > >> + > >> +ZSBL loads the U-Boot SPL (u-boot-spl.bin) from a partition with GUID > >> +type > >> +5B193300-FC78-40CD-8002-E86C45580B47 > >> + > >> +U-Boot SPL expects a U-Boot FIT image (u-boot.itb) from a partition > >> +with GUID type 2E54B353-1271-4842-806F-E436D6AF6985 > >> + > >> +FIT image (u-boot.itb) is a combination of fw_dynamic.bin, > >> +u-boot-nodtb.bin and device tree blob (hifive-unleashed-a00.dtb) > >> + > >> +Format the SD card (make sure the disk has GPT, otherwise use gdisk > >> +to switch) > >> + > >> +.. code-block:: none > >> + > >> + # sudo sgdisk --clear \ > >> + > --set-alignment=2 \ > >> + > --new=1:34:2081 --change-name=1:loader1 --typecode=1:5B193300- > >FC78-40CD-8002-E86C45580B47 \ > >> + > --new=2:2082:10273 --change-name=2:loader2 -- > >typecode=2:2E54B353-1271-4842-806F-E436D6AF6985 \ > >> + > --new=3:10274: --change-name=3:rootfs > >> + --typecode=3:0FC63DAF-8483-4772-8E79-3D69D8477DE4 \ > > > >The LBAs in this command do not match what is proposed in this patch: > > > >http://patchwork.ozlabs.org/project/uboot/patch/20200514115258.21042- > >16-pragnesh.patel at sifive.com/ > > I think the LBAs are in decimal here in this patch and hex in the proposed patch. > Ah, yes! Needs to get some sleep :) Reviewed-by: Bin Meng <bmeng.cn at gmail.com> Regards, Bin
On Sat, May 16, 2020 at 11:42 AM Pragnesh Patel <pragnesh.patel at sifive.com> wrote: > > Hi Jagan, > > >-----Original Message----- > >From: Jagan Teki <jagan at amarulasolutions.com> > >Sent: 15 May 2020 23:05 > >To: Pragnesh Patel <pragnesh.patel at sifive.com> > >Cc: U-Boot-Denx <u-boot at lists.denx.de>; Atish Patra > ><atish.patra at wdc.com>; Palmer Dabbelt <palmerdabbelt at google.com>; Bin > >Meng <bmeng.cn at gmail.com>; Paul Walmsley <paul.walmsley at sifive.com>; > >Anup Patel <anup.patel at wdc.com>; Sagar Kadam > ><sagar.kadam at sifive.com>; Rick Chen <rick at andestech.com>; Palmer > >Dabbelt <palmer at dabbelt.com> > >Subject: Re: [PATCH v10 17/18] configs: fu540: Add config options for U-Boot > >SPL > > > >[External Email] Do not click links or attachments unless you recognize the > >sender and know the content is safe > > > >On Thu, May 14, 2020 at 5:24 PM Pragnesh Patel > ><pragnesh.patel at sifive.com> wrote: > >> > >> With sifive_fu540_defconfig: > >> > >> User can use FSBL or u-boot-spl.bin anyone at a time. > >> > >> For FSBL, > >> fsbl->fw_payload.bin (opensbi + U-Boot) > >> > >> For u-boot-spl.bin, > >> u-boot-spl.bin->FIT image (opensbi + U-Boot proper + dtb) > >> > >> U-Boot SPL will be loaded by ZSBL from SD card (replace fsbl.bin with > >> u-boot-spl.bin) and runs in L2 LIM in machine mode and then load FIT > >> image u-boot.itb from SD card into RAM. > >> > >> U-Boot SPL expects u-boot.itb FIT image at the starting of SD card > >> sector number (0x822) of GUID type "2E54B353-1271-4842-806F- > >E436D6AF6985" > >> > >> Signed-off-by: Pragnesh Patel <pragnesh.patel at sifive.com> > >> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com> > >> Reviewed-by: Jagan Teki <jagan at amarulasolutions.com> > >> --- > >> configs/sifive_fu540_defconfig | 8 ++ > >> doc/board/sifive/fu540.rst | 134 +++++++++++++++++++++++++++++++++ > >> 2 files changed, 142 insertions(+) > >> > >> diff --git a/configs/sifive_fu540_defconfig > >> b/configs/sifive_fu540_defconfig index f805aacc7a..8d412f8d6a 100644 > >> --- a/configs/sifive_fu540_defconfig > >> +++ b/configs/sifive_fu540_defconfig > >> @@ -1,6 +1,11 @@ > >> CONFIG_RISCV=y > >> +CONFIG_SPL_GPIO_SUPPORT=y > >> +CONFIG_SYS_MALLOC_F_LEN=0x3000 > >> CONFIG_ENV_SIZE=0x20000 > >> +CONFIG_SPL_MMC_SUPPORT=y > >> CONFIG_NR_DRAM_BANKS=1 > >> +CONFIG_SPL=y > >> +CONFIG_SPL_SPI_SUPPORT=y > >> CONFIG_TARGET_SIFIVE_FU540=y > >> CONFIG_ARCH_RV64I=y > >> CONFIG_RISCV_SMODE=y > >> @@ -9,7 +14,10 @@ CONFIG_FIT=y > >> CONFIG_MISC_INIT_R=y > >> CONFIG_DISPLAY_CPUINFO=y > >> CONFIG_DISPLAY_BOARDINFO=y > >> +CONFIG_SPL_SEPARATE_BSS=y > >> +CONFIG_SPL_YMODEM_SUPPORT=y > >> CONFIG_OF_BOARD_FIXUP=y > >> CONFIG_DEFAULT_DEVICE_TREE="hifive-unleashed-a00" > >> CONFIG_SYS_RELOC_GD_ENV_ADDR=y > >> +CONFIG_SPL_CLK=y > >> CONFIG_DM_MTD=y > >> diff --git a/doc/board/sifive/fu540.rst b/doc/board/sifive/fu540.rst > >> index 610ba87074..89e8d66c56 100644 > >> --- a/doc/board/sifive/fu540.rst > >> +++ b/doc/board/sifive/fu540.rst > >> @@ -31,6 +31,9 @@ TODO: > >> stdout-path = "/soc/serial at 10010000:115200"; > >> }; > >> > >> +Booting from MMC using FSBL > >> +--------------------------- > >> + > >> Building > >> -------- > >> > >> @@ -421,3 +424,134 @@ as well. > >> > >> Please press Enter to activate this console. > >> / # > >> + > >> +Booting from MMC using U-Boot SPL > >> +--------------------------------- > >> + > >> +Building > >> +-------- > >> + > >> +Before building U-Boot SPL, OpenSBI must be built first. OpenSBI can > >> +be cloned and built for FU540 as below: > >> + > >> +.. code-block:: console > >> + > >> + git clone https://github.com/riscv/opensbi.git > >> + cd opensbi > >> + make PLATFORM=generic FW_DYNAMIC=y > >> + > >> +Copy OpenSBI FW_DYNAMIC image > >> +(build/platform/generic/firmware/fw_dynamic.bin) into U-Boot root > >> +directory > >> + > >> +.. code-block:: console > >> + > >> + cp build/platform/generic/firmware/fw_dynamic.bin <u-boot-dir> > >> + > >> +Now build the U-Boot SPL and U-Boot proper > >> + > >> +.. code-block:: console > >> + > >> + cd <U-Boot-dir> > >> + make sifive_fu540_defconfig > >> + make > >> + > >> +This will generate spl/u-boot-spl.bin and FIT image (u-boot.itb) > >> + > >> + > >> +Flashing > >> +-------- > >> + > >> +ZSBL loads the U-Boot SPL (u-boot-spl.bin) from a partition with GUID > >> +type > >> +5B193300-FC78-40CD-8002-E86C45580B47 > >> + > >> +U-Boot SPL expects a U-Boot FIT image (u-boot.itb) from a partition > >> +with GUID type 2E54B353-1271-4842-806F-E436D6AF6985 > >> + > >> +FIT image (u-boot.itb) is a combination of fw_dynamic.bin, > >> +u-boot-nodtb.bin and device tree blob (hifive-unleashed-a00.dtb) > >> + > >> +Format the SD card (make sure the disk has GPT, otherwise use gdisk > >> +to switch) > >> + > >> +.. code-block:: none > >> + > >> + # sudo sgdisk --clear \ > >> + > --set-alignment=2 \ > >> + > --new=1:34:2081 --change-name=1:loader1 --typecode=1:5B193300- > >FC78-40CD-8002-E86C45580B47 \ > >> + > --new=2:2082:10273 --change-name=2:loader2 -- > >typecode=2:2E54B353-1271-4842-806F-E436D6AF6985 \ > >> + > --new=3:10274: --change-name=3:rootfs --typecode=3:0FC63DAF- > >8483-4772-8E79-3D69D8477DE4 \ > >> + > /dev/sda > >> + > >> +Program the SD card > >> + > >> +.. code-block:: none > >> + > >> + sudo dd if=spl/u-boot-spl.bin of=/dev/sda seek=34 > >> + sudo dd if=u-boot.itb of=/dev/sda seek=2082 > >> + > >> +Booting > >> +------- > >> +Once you plugin the sdcard and power up, you should see the U-Boot > >prompt. > >> + > >> +Sample boot log from HiFive Unleashed board > >> +------------------------------------------- > >> + > >> +.. code-block:: none > >> + > >> + U-Boot SPL 2020.04-rc2-00109-g63efc7e07e-dirty (Apr 30 2020 - > >13:52:36 +0530) > >> + Trying to boot from MMC1 > >> + > >> + > >> + U-Boot 2020.04-rc2-00109-g63efc7e07e-dirty (Apr 30 2020 - > >> + 13:52:36 +0530) > >> + > >> + CPU: rv64imafdc > >> + Model: SiFive HiFive Unleashed A00 > >> + DRAM: 8 GiB > >> + MMC: spi at 10050000:mmc at 0: 0 > >> + In: serial at 10010000 > >> + Out: serial at 10010000 > >> + Err: serial at 10010000 > >> + Board serial number should not be 0 !! > >> + Net: > >> + Warning: ethernet at 10090000 (eth0) using random MAC address - > >96:06:92:18:eb:04 > >> + eth0: ethernet at 10090000 > >> + Hit any key to stop autoboot: 0 > > > >Look like v10 seems to be a change, I can see memory region print? > > > >U-Boot SPL 2020.07-rc1-00540-gd06cdf6989 (May 15 2020 - 23:00:17 > >+0530) > >Trying to boot from MMC1 > > > > > >U-Boot 2020.07-rc1-00540-gd06cdf6989 (May 15 2020 - 23:00:17 +0530) > > > >CPU: rv64imafdc > >Model: SiFive HiFive Unleashed A00 > >DRAM: 8 GiB > >No reserved memory region found in source FDT > >MMC: spi at 10050000:mmc at 0: 0 > >In: serial at 10010000 > >Out: serial at 10010000 > >Err: serial at 10010000 > >Net: eth0: ethernet at 10090000 > >Hit any key to stop autoboot: 0 > > I haven't got this "memory region" print, can you please update your U-Boot and OpenSBI > Repo and recheck. I have checked with latest opensbi, still got it. U-Boot SPL 2020.07-rc2-00154-gb37b258d49-dirty (May 19 2020 - 21:33:36 +0530) Trying to boot from MMC1 OpenSBI v0.6 ____ _____ ____ _____ / __ \ / ____| _ \_ _| | | | |_ __ ___ _ __ | (___ | |_) || | | | | | '_ \ / _ \ '_ \ \___ \| _ < | | | |__| | |_) | __/ | | |____) | |_) || |_ \____/| .__/ \___|_| |_|_____/|____/_____| | | |_| Platform Name : SiFive Freedom U540 Platform HART Features : RV64ACDFIMSU Platform Max HARTs : 5 Current Hart : 3 Firmware Base : 0x80000000 Firmware Size : 100 KB Runtime SBI Version : 0.2 MIDELEG : 0x0000000000000222 MEDELEG : 0x000000000000b109 PMP0 : 0x0000000080000000-0x000000008001ffff (A) PMP1 : 0x0000000000000000-0x0000007fffffffff (A,R,W,X) U-Boot 2020.07-rc2-00154-gb37b258d49-dirty (May 19 2020 - 21:33:36 +0530) CPU: rv64imafdc Model: SiFive HiFive Unleashed A00 DRAM: 8 GiB No reserved memory region found in source FDT MMC: spi at 10050000:mmc at 0: 0 In: serial at 10010000 Out: serial at 10010000 Err: serial at 10010000 Net: eth0: ethernet at 10090000 Hit any key to stop autoboot: 0 opensbi sha1: 89ba63493c4ce98861144180e408d6db391fd1c3 gcc version: gcc version 8.4.0 (Buildroot 2020.05-git-00692-gd645010af2) Jagan.
Hi Jagan, On Wed, May 20, 2020 at 12:11 AM Jagan Teki <jagan at amarulasolutions.com> wrote: > > On Sat, May 16, 2020 at 11:42 AM Pragnesh Patel > <pragnesh.patel at sifive.com> wrote: > > > > Hi Jagan, > > > > >-----Original Message----- > > >From: Jagan Teki <jagan at amarulasolutions.com> > > >Sent: 15 May 2020 23:05 > > >To: Pragnesh Patel <pragnesh.patel at sifive.com> > > >Cc: U-Boot-Denx <u-boot at lists.denx.de>; Atish Patra > > ><atish.patra at wdc.com>; Palmer Dabbelt <palmerdabbelt at google.com>; Bin > > >Meng <bmeng.cn at gmail.com>; Paul Walmsley <paul.walmsley at sifive.com>; > > >Anup Patel <anup.patel at wdc.com>; Sagar Kadam > > ><sagar.kadam at sifive.com>; Rick Chen <rick at andestech.com>; Palmer > > >Dabbelt <palmer at dabbelt.com> > > >Subject: Re: [PATCH v10 17/18] configs: fu540: Add config options for U-Boot > > >SPL > > > > > >[External Email] Do not click links or attachments unless you recognize the > > >sender and know the content is safe > > > > > >On Thu, May 14, 2020 at 5:24 PM Pragnesh Patel > > ><pragnesh.patel at sifive.com> wrote: > > >> > > >> With sifive_fu540_defconfig: > > >> > > >> User can use FSBL or u-boot-spl.bin anyone at a time. > > >> > > >> For FSBL, > > >> fsbl->fw_payload.bin (opensbi + U-Boot) > > >> > > >> For u-boot-spl.bin, > > >> u-boot-spl.bin->FIT image (opensbi + U-Boot proper + dtb) > > >> > > >> U-Boot SPL will be loaded by ZSBL from SD card (replace fsbl.bin with > > >> u-boot-spl.bin) and runs in L2 LIM in machine mode and then load FIT > > >> image u-boot.itb from SD card into RAM. > > >> > > >> U-Boot SPL expects u-boot.itb FIT image at the starting of SD card > > >> sector number (0x822) of GUID type "2E54B353-1271-4842-806F- > > >E436D6AF6985" > > >> > > >> Signed-off-by: Pragnesh Patel <pragnesh.patel at sifive.com> > > >> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com> > > >> Reviewed-by: Jagan Teki <jagan at amarulasolutions.com> > > >> --- > > >> configs/sifive_fu540_defconfig | 8 ++ > > >> doc/board/sifive/fu540.rst | 134 +++++++++++++++++++++++++++++++++ > > >> 2 files changed, 142 insertions(+) > > >> > > >> diff --git a/configs/sifive_fu540_defconfig > > >> b/configs/sifive_fu540_defconfig index f805aacc7a..8d412f8d6a 100644 > > >> --- a/configs/sifive_fu540_defconfig > > >> +++ b/configs/sifive_fu540_defconfig > > >> @@ -1,6 +1,11 @@ > > >> CONFIG_RISCV=y > > >> +CONFIG_SPL_GPIO_SUPPORT=y > > >> +CONFIG_SYS_MALLOC_F_LEN=0x3000 > > >> CONFIG_ENV_SIZE=0x20000 > > >> +CONFIG_SPL_MMC_SUPPORT=y > > >> CONFIG_NR_DRAM_BANKS=1 > > >> +CONFIG_SPL=y > > >> +CONFIG_SPL_SPI_SUPPORT=y > > >> CONFIG_TARGET_SIFIVE_FU540=y > > >> CONFIG_ARCH_RV64I=y > > >> CONFIG_RISCV_SMODE=y > > >> @@ -9,7 +14,10 @@ CONFIG_FIT=y > > >> CONFIG_MISC_INIT_R=y > > >> CONFIG_DISPLAY_CPUINFO=y > > >> CONFIG_DISPLAY_BOARDINFO=y > > >> +CONFIG_SPL_SEPARATE_BSS=y > > >> +CONFIG_SPL_YMODEM_SUPPORT=y > > >> CONFIG_OF_BOARD_FIXUP=y > > >> CONFIG_DEFAULT_DEVICE_TREE="hifive-unleashed-a00" > > >> CONFIG_SYS_RELOC_GD_ENV_ADDR=y > > >> +CONFIG_SPL_CLK=y > > >> CONFIG_DM_MTD=y > > >> diff --git a/doc/board/sifive/fu540.rst b/doc/board/sifive/fu540.rst > > >> index 610ba87074..89e8d66c56 100644 > > >> --- a/doc/board/sifive/fu540.rst > > >> +++ b/doc/board/sifive/fu540.rst > > >> @@ -31,6 +31,9 @@ TODO: > > >> stdout-path = "/soc/serial at 10010000:115200"; > > >> }; > > >> > > >> +Booting from MMC using FSBL > > >> +--------------------------- > > >> + > > >> Building > > >> -------- > > >> > > >> @@ -421,3 +424,134 @@ as well. > > >> > > >> Please press Enter to activate this console. > > >> / # > > >> + > > >> +Booting from MMC using U-Boot SPL > > >> +--------------------------------- > > >> + > > >> +Building > > >> +-------- > > >> + > > >> +Before building U-Boot SPL, OpenSBI must be built first. OpenSBI can > > >> +be cloned and built for FU540 as below: > > >> + > > >> +.. code-block:: console > > >> + > > >> + git clone https://github.com/riscv/opensbi.git > > >> + cd opensbi > > >> + make PLATFORM=generic FW_DYNAMIC=y > > >> + > > >> +Copy OpenSBI FW_DYNAMIC image > > >> +(build/platform/generic/firmware/fw_dynamic.bin) into U-Boot root > > >> +directory > > >> + > > >> +.. code-block:: console > > >> + > > >> + cp build/platform/generic/firmware/fw_dynamic.bin <u-boot-dir> > > >> + > > >> +Now build the U-Boot SPL and U-Boot proper > > >> + > > >> +.. code-block:: console > > >> + > > >> + cd <U-Boot-dir> > > >> + make sifive_fu540_defconfig > > >> + make > > >> + > > >> +This will generate spl/u-boot-spl.bin and FIT image (u-boot.itb) > > >> + > > >> + > > >> +Flashing > > >> +-------- > > >> + > > >> +ZSBL loads the U-Boot SPL (u-boot-spl.bin) from a partition with GUID > > >> +type > > >> +5B193300-FC78-40CD-8002-E86C45580B47 > > >> + > > >> +U-Boot SPL expects a U-Boot FIT image (u-boot.itb) from a partition > > >> +with GUID type 2E54B353-1271-4842-806F-E436D6AF6985 > > >> + > > >> +FIT image (u-boot.itb) is a combination of fw_dynamic.bin, > > >> +u-boot-nodtb.bin and device tree blob (hifive-unleashed-a00.dtb) > > >> + > > >> +Format the SD card (make sure the disk has GPT, otherwise use gdisk > > >> +to switch) > > >> + > > >> +.. code-block:: none > > >> + > > >> + # sudo sgdisk --clear \ > > >> + > --set-alignment=2 \ > > >> + > --new=1:34:2081 --change-name=1:loader1 --typecode=1:5B193300- > > >FC78-40CD-8002-E86C45580B47 \ > > >> + > --new=2:2082:10273 --change-name=2:loader2 -- > > >typecode=2:2E54B353-1271-4842-806F-E436D6AF6985 \ > > >> + > --new=3:10274: --change-name=3:rootfs --typecode=3:0FC63DAF- > > >8483-4772-8E79-3D69D8477DE4 \ > > >> + > /dev/sda > > >> + > > >> +Program the SD card > > >> + > > >> +.. code-block:: none > > >> + > > >> + sudo dd if=spl/u-boot-spl.bin of=/dev/sda seek=34 > > >> + sudo dd if=u-boot.itb of=/dev/sda seek=2082 > > >> + > > >> +Booting > > >> +------- > > >> +Once you plugin the sdcard and power up, you should see the U-Boot > > >prompt. > > >> + > > >> +Sample boot log from HiFive Unleashed board > > >> +------------------------------------------- > > >> + > > >> +.. code-block:: none > > >> + > > >> + U-Boot SPL 2020.04-rc2-00109-g63efc7e07e-dirty (Apr 30 2020 - > > >13:52:36 +0530) > > >> + Trying to boot from MMC1 > > >> + > > >> + > > >> + U-Boot 2020.04-rc2-00109-g63efc7e07e-dirty (Apr 30 2020 - > > >> + 13:52:36 +0530) > > >> + > > >> + CPU: rv64imafdc > > >> + Model: SiFive HiFive Unleashed A00 > > >> + DRAM: 8 GiB > > >> + MMC: spi at 10050000:mmc at 0: 0 > > >> + In: serial at 10010000 > > >> + Out: serial at 10010000 > > >> + Err: serial at 10010000 > > >> + Board serial number should not be 0 !! > > >> + Net: > > >> + Warning: ethernet at 10090000 (eth0) using random MAC address - > > >96:06:92:18:eb:04 > > >> + eth0: ethernet at 10090000 > > >> + Hit any key to stop autoboot: 0 > > > > > >Look like v10 seems to be a change, I can see memory region print? > > > > > >U-Boot SPL 2020.07-rc1-00540-gd06cdf6989 (May 15 2020 - 23:00:17 > > >+0530) > > >Trying to boot from MMC1 > > > > > > > > >U-Boot 2020.07-rc1-00540-gd06cdf6989 (May 15 2020 - 23:00:17 +0530) > > > > > >CPU: rv64imafdc > > >Model: SiFive HiFive Unleashed A00 > > >DRAM: 8 GiB > > >No reserved memory region found in source FDT > > >MMC: spi at 10050000:mmc at 0: 0 > > >In: serial at 10010000 > > >Out: serial at 10010000 > > >Err: serial at 10010000 > > >Net: eth0: ethernet at 10090000 > > >Hit any key to stop autoboot: 0 > > > > I haven't got this "memory region" print, can you please update your U-Boot and OpenSBI > > Repo and recheck. > > I have checked with latest opensbi, still got it. Do you mean this message? No reserved memory region found in source FDT If yes, you need use OpenSBI v0.7. > > U-Boot SPL 2020.07-rc2-00154-gb37b258d49-dirty (May 19 2020 - 21:33:36 +0530) > Trying to boot from MMC1 > > OpenSBI v0.6 > ____ _____ ____ _____ > / __ \ / ____| _ \_ _| > | | | |_ __ ___ _ __ | (___ | |_) || | > | | | | '_ \ / _ \ '_ \ \___ \| _ < | | > | |__| | |_) | __/ | | |____) | |_) || |_ > \____/| .__/ \___|_| |_|_____/|____/_____| > | | > |_| > > Platform Name : SiFive Freedom U540 > Platform HART Features : RV64ACDFIMSU > Platform Max HARTs : 5 > Current Hart : 3 > Firmware Base : 0x80000000 > Firmware Size : 100 KB > Runtime SBI Version : 0.2 > > MIDELEG : 0x0000000000000222 > MEDELEG : 0x000000000000b109 > PMP0 : 0x0000000080000000-0x000000008001ffff (A) > PMP1 : 0x0000000000000000-0x0000007fffffffff (A,R,W,X) > > > U-Boot 2020.07-rc2-00154-gb37b258d49-dirty (May 19 2020 - 21:33:36 +0530) > > CPU: rv64imafdc > Model: SiFive HiFive Unleashed A00 > DRAM: 8 GiB > No reserved memory region found in source FDT > MMC: spi at 10050000:mmc at 0: 0 > In: serial at 10010000 > Out: serial at 10010000 > Err: serial at 10010000 > Net: eth0: ethernet at 10090000 > Hit any key to stop autoboot: 0 > > opensbi sha1: > 89ba63493c4ce98861144180e408d6db391fd1c3 > > gcc version: > gcc version 8.4.0 (Buildroot 2020.05-git-00692-gd645010af2) Regards, Bin
Hi Jagan, >-----Original Message----- >From: Bin Meng <bmeng.cn at gmail.com> >Sent: 20 May 2020 10:07 >To: Jagan Teki <jagan at amarulasolutions.com> >Cc: Pragnesh Patel <pragnesh.patel at sifive.com>; U-Boot-Denx <u- >boot at lists.denx.de>; Atish Patra <atish.patra at wdc.com>; Palmer Dabbelt ><palmerdabbelt at google.com>; Paul Walmsley <paul.walmsley at sifive.com>; >Anup Patel <anup.patel at wdc.com>; Sagar Kadam ><sagar.kadam at sifive.com>; Rick Chen <rick at andestech.com>; Palmer >Dabbelt <palmer at dabbelt.com> >Subject: Re: [PATCH v10 17/18] configs: fu540: Add config options for U-Boot >SPL > >[External Email] Do not click links or attachments unless you recognize the >sender and know the content is safe > >Hi Jagan, > >On Wed, May 20, 2020 at 12:11 AM Jagan Teki <jagan at amarulasolutions.com> >wrote: >> >> On Sat, May 16, 2020 at 11:42 AM Pragnesh Patel >> <pragnesh.patel at sifive.com> wrote: >> > >> > Hi Jagan, >> > >> > >-----Original Message----- >> > >From: Jagan Teki <jagan at amarulasolutions.com> >> > >Sent: 15 May 2020 23:05 >> > >To: Pragnesh Patel <pragnesh.patel at sifive.com> >> > >Cc: U-Boot-Denx <u-boot at lists.denx.de>; Atish Patra >> > ><atish.patra at wdc.com>; Palmer Dabbelt ><palmerdabbelt at google.com>; >> > >Bin Meng <bmeng.cn at gmail.com>; Paul Walmsley >> > ><paul.walmsley at sifive.com>; Anup Patel <anup.patel at wdc.com>; Sagar >> > >Kadam <sagar.kadam at sifive.com>; Rick Chen <rick at andestech.com>; >> > >Palmer Dabbelt <palmer at dabbelt.com> >> > >Subject: Re: [PATCH v10 17/18] configs: fu540: Add config options >> > >for U-Boot SPL >> > > >> > >[External Email] Do not click links or attachments unless you >> > >recognize the sender and know the content is safe >> > > >> > >On Thu, May 14, 2020 at 5:24 PM Pragnesh Patel >> > ><pragnesh.patel at sifive.com> wrote: >> > >> >> > >> With sifive_fu540_defconfig: >> > >> >> > >> User can use FSBL or u-boot-spl.bin anyone at a time. >> > >> >> > >> For FSBL, >> > >> fsbl->fw_payload.bin (opensbi + U-Boot) >> > >> >> > >> For u-boot-spl.bin, >> > >> u-boot-spl.bin->FIT image (opensbi + U-Boot proper + dtb) >> > >> >> > >> U-Boot SPL will be loaded by ZSBL from SD card (replace fsbl.bin >> > >> with >> > >> u-boot-spl.bin) and runs in L2 LIM in machine mode and then load >> > >> FIT image u-boot.itb from SD card into RAM. >> > >> >> > >> U-Boot SPL expects u-boot.itb FIT image at the starting of SD >> > >> card sector number (0x822) of GUID type "2E54B353-1271-4842-806F- >> > >E436D6AF6985" >> > >> >> > >> Signed-off-by: Pragnesh Patel <pragnesh.patel at sifive.com> >> > >> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com> >> > >> Reviewed-by: Jagan Teki <jagan at amarulasolutions.com> >> > >> --- >> > >> configs/sifive_fu540_defconfig | 8 ++ >> > >> doc/board/sifive/fu540.rst | 134 >+++++++++++++++++++++++++++++++++ >> > >> 2 files changed, 142 insertions(+) >> > >> >> > >> diff --git a/configs/sifive_fu540_defconfig >> > >> b/configs/sifive_fu540_defconfig index f805aacc7a..8d412f8d6a >> > >> 100644 >> > >> --- a/configs/sifive_fu540_defconfig >> > >> +++ b/configs/sifive_fu540_defconfig >> > >> @@ -1,6 +1,11 @@ >> > >> CONFIG_RISCV=y >> > >> +CONFIG_SPL_GPIO_SUPPORT=y >> > >> +CONFIG_SYS_MALLOC_F_LEN=0x3000 >> > >> CONFIG_ENV_SIZE=0x20000 >> > >> +CONFIG_SPL_MMC_SUPPORT=y >> > >> CONFIG_NR_DRAM_BANKS=1 >> > >> +CONFIG_SPL=y >> > >> +CONFIG_SPL_SPI_SUPPORT=y >> > >> CONFIG_TARGET_SIFIVE_FU540=y >> > >> CONFIG_ARCH_RV64I=y >> > >> CONFIG_RISCV_SMODE=y >> > >> @@ -9,7 +14,10 @@ CONFIG_FIT=y >> > >> CONFIG_MISC_INIT_R=y >> > >> CONFIG_DISPLAY_CPUINFO=y >> > >> CONFIG_DISPLAY_BOARDINFO=y >> > >> +CONFIG_SPL_SEPARATE_BSS=y >> > >> +CONFIG_SPL_YMODEM_SUPPORT=y >> > >> CONFIG_OF_BOARD_FIXUP=y >> > >> CONFIG_DEFAULT_DEVICE_TREE="hifive-unleashed-a00" >> > >> CONFIG_SYS_RELOC_GD_ENV_ADDR=y >> > >> +CONFIG_SPL_CLK=y >> > >> CONFIG_DM_MTD=y >> > >> diff --git a/doc/board/sifive/fu540.rst >> > >> b/doc/board/sifive/fu540.rst index 610ba87074..89e8d66c56 100644 >> > >> --- a/doc/board/sifive/fu540.rst >> > >> +++ b/doc/board/sifive/fu540.rst >> > >> @@ -31,6 +31,9 @@ TODO: >> > >> stdout-path = "/soc/serial at 10010000:115200"; >> > >> }; >> > >> >> > >> +Booting from MMC using FSBL >> > >> +--------------------------- >> > >> + >> > >> Building >> > >> -------- >> > >> >> > >> @@ -421,3 +424,134 @@ as well. >> > >> >> > >> Please press Enter to activate this console. >> > >> / # >> > >> + >> > >> +Booting from MMC using U-Boot SPL >> > >> +--------------------------------- >> > >> + >> > >> +Building >> > >> +-------- >> > >> + >> > >> +Before building U-Boot SPL, OpenSBI must be built first. OpenSBI >> > >> +can be cloned and built for FU540 as below: >> > >> + >> > >> +.. code-block:: console >> > >> + >> > >> + git clone https://github.com/riscv/opensbi.git >> > >> + cd opensbi >> > >> + make PLATFORM=generic FW_DYNAMIC=y >> > >> + >> > >> +Copy OpenSBI FW_DYNAMIC image >> > >> +(build/platform/generic/firmware/fw_dynamic.bin) into U-Boot >> > >> +root directory >> > >> + >> > >> +.. code-block:: console >> > >> + >> > >> + cp build/platform/generic/firmware/fw_dynamic.bin >> > >> + <u-boot-dir> >> > >> + >> > >> +Now build the U-Boot SPL and U-Boot proper >> > >> + >> > >> +.. code-block:: console >> > >> + >> > >> + cd <U-Boot-dir> >> > >> + make sifive_fu540_defconfig >> > >> + make >> > >> + >> > >> +This will generate spl/u-boot-spl.bin and FIT image (u-boot.itb) >> > >> + >> > >> + >> > >> +Flashing >> > >> +-------- >> > >> + >> > >> +ZSBL loads the U-Boot SPL (u-boot-spl.bin) from a partition with >> > >> +GUID type >> > >> +5B193300-FC78-40CD-8002-E86C45580B47 >> > >> + >> > >> +U-Boot SPL expects a U-Boot FIT image (u-boot.itb) from a >> > >> +partition with GUID type 2E54B353-1271-4842-806F-E436D6AF6985 >> > >> + >> > >> +FIT image (u-boot.itb) is a combination of fw_dynamic.bin, >> > >> +u-boot-nodtb.bin and device tree blob (hifive-unleashed-a00.dtb) >> > >> + >> > >> +Format the SD card (make sure the disk has GPT, otherwise use >> > >> +gdisk to switch) >> > >> + >> > >> +.. code-block:: none >> > >> + >> > >> + # sudo sgdisk --clear \ >> > >> + > --set-alignment=2 \ >> > >> + > --new=1:34:2081 --change-name=1:loader1 >> > >> + --typecode=1:5B193300- >> > >FC78-40CD-8002-E86C45580B47 \ >> > >> + > --new=2:2082:10273 --change-name=2:loader2 -- >> > >typecode=2:2E54B353-1271-4842-806F-E436D6AF6985 \ >> > >> + > --new=3:10274: --change-name=3:rootfs >> > >> + --typecode=3:0FC63DAF- >> > >8483-4772-8E79-3D69D8477DE4 \ >> > >> + > /dev/sda >> > >> + >> > >> +Program the SD card >> > >> + >> > >> +.. code-block:: none >> > >> + >> > >> + sudo dd if=spl/u-boot-spl.bin of=/dev/sda seek=34 >> > >> + sudo dd if=u-boot.itb of=/dev/sda seek=2082 >> > >> + >> > >> +Booting >> > >> +------- >> > >> +Once you plugin the sdcard and power up, you should see the >> > >> +U-Boot >> > >prompt. >> > >> + >> > >> +Sample boot log from HiFive Unleashed board >> > >> +------------------------------------------- >> > >> + >> > >> +.. code-block:: none >> > >> + >> > >> + U-Boot SPL 2020.04-rc2-00109-g63efc7e07e-dirty (Apr 30 >> > >> + 2020 - >> > >13:52:36 +0530) >> > >> + Trying to boot from MMC1 >> > >> + >> > >> + >> > >> + U-Boot 2020.04-rc2-00109-g63efc7e07e-dirty (Apr 30 2020 - >> > >> + 13:52:36 +0530) >> > >> + >> > >> + CPU: rv64imafdc >> > >> + Model: SiFive HiFive Unleashed A00 >> > >> + DRAM: 8 GiB >> > >> + MMC: spi at 10050000:mmc at 0: 0 >> > >> + In: serial at 10010000 >> > >> + Out: serial at 10010000 >> > >> + Err: serial at 10010000 >> > >> + Board serial number should not be 0 !! >> > >> + Net: >> > >> + Warning: ethernet at 10090000 (eth0) using random MAC >> > >> + address - >> > >96:06:92:18:eb:04 >> > >> + eth0: ethernet at 10090000 >> > >> + Hit any key to stop autoboot: 0 >> > > >> > >Look like v10 seems to be a change, I can see memory region print? >> > > >> > >U-Boot SPL 2020.07-rc1-00540-gd06cdf6989 (May 15 2020 - 23:00:17 >> > >+0530) >> > >Trying to boot from MMC1 >> > > >> > > >> > >U-Boot 2020.07-rc1-00540-gd06cdf6989 (May 15 2020 - 23:00:17 +0530) >> > > >> > >CPU: rv64imafdc >> > >Model: SiFive HiFive Unleashed A00 >> > >DRAM: 8 GiB >> > >No reserved memory region found in source FDT >> > >MMC: spi at 10050000:mmc at 0: 0 >> > >In: serial at 10010000 >> > >Out: serial at 10010000 >> > >Err: serial at 10010000 >> > >Net: eth0: ethernet at 10090000 >> > >Hit any key to stop autoboot: 0 >> > >> > I haven't got this "memory region" print, can you please update your >> > U-Boot and OpenSBI Repo and recheck. >> >> I have checked with latest opensbi, still got it. > >Do you mean this message? > > No reserved memory region found in source FDT > >If yes, you need use OpenSBI v0.7. > >> >> U-Boot SPL 2020.07-rc2-00154-gb37b258d49-dirty (May 19 2020 - 21:33:36 >> +0530) Trying to boot from MMC1 >> >> OpenSBI v0.6 >> ____ _____ ____ _____ >> / __ \ / ____| _ \_ _| >> | | | |_ __ ___ _ __ | (___ | |_) || | >> | | | | '_ \ / _ \ '_ \ \___ \| _ < | | | |__| | |_) | __/ | | >> |____) | |_) || |_ >> \____/| .__/ \___|_| |_|_____/|____/_____| >> | | >> |_| >> >> Platform Name : SiFive Freedom U540 >> Platform HART Features : RV64ACDFIMSU >> Platform Max HARTs : 5 >> Current Hart : 3 >> Firmware Base : 0x80000000 >> Firmware Size : 100 KB >> Runtime SBI Version : 0.2 >> >> MIDELEG : 0x0000000000000222 >> MEDELEG : 0x000000000000b109 >> PMP0 : 0x0000000080000000-0x000000008001ffff (A) >> PMP1 : 0x0000000000000000-0x0000007fffffffff (A,R,W,X) >> >> >> U-Boot 2020.07-rc2-00154-gb37b258d49-dirty (May 19 2020 - 21:33:36 >> +0530) >> >> CPU: rv64imafdc >> Model: SiFive HiFive Unleashed A00 >> DRAM: 8 GiB >> No reserved memory region found in source FDT >> MMC: spi at 10050000:mmc at 0: 0 >> In: serial at 10010000 >> Out: serial at 10010000 >> Err: serial at 10010000 >> Net: eth0: ethernet at 10090000 >> Hit any key to stop autoboot: 0 >> >> opensbi sha1: >> 89ba63493c4ce98861144180e408d6db391fd1c3 I have updated my U-Boot and OpenSBI repo and recheck., still not getting this "reserved memory" print. Below is my observation from your boot prints: - It looks like your OpenSBI repo is not updated one. Latest OpenSBI version is v0.7 . - you are using "make PLATFORM=sifive/fu540" instead of " make PLATFORM=generic" Can you please rebuild OpenSBI with above suggestion and reconfirm. U-Boot sha1: c2279d784e35fa25ee3a9fa28a74a1ba545f8c1e (Merge branch '2020-05-18-reduce-size-of-common.h') OpenSBI sha1: 89ba63493c4ce98861144180e408d6db391fd1c3 (include: sbi: Add firmware extension constants) Boot prints: U-Boot SPL 2020.07-rc2-00711-g179f936b5c-dirty (May 20 2020 - 12:42:00 +0530) Trying to boot from MMC1 OpenSBI v0.7-59-g89ba634 ____ _____ ____ _____ / __ \ / ____| _ \_ _| | | | |_ __ ___ _ __ | (___ | |_) || | | | | | '_ \ / _ \ '_ \ \___ \| _ < | | | |__| | |_) | __/ | | |____) | |_) || |_ \____/| .__/ \___|_| |_|_____/|____/_____| | | |_| Platform Name : SiFive HiFive Unleashed A00 Platform Features : timer,mfdeleg Platform HART Count : 5 Boot HART ID : 1 Boot HART ISA : rv64imafdcsu BOOT HART Features : pmp,scounteren,mcounteren BOOT HART PMP Count : 16 Firmware Base : 0x80000000 Firmware Size : 116 KB Runtime SBI Version : 0.2 MIDELEG : 0x0000000000000222 MEDELEG : 0x000000000000b109 PMP0 : 0x0000000080000000-0x000000008001ffff (A) PMP1 : 0x0000000000000000-0x0000007fffffffff (A,R,W,X) U-Boot 2020.07-rc2-00711-g179f936b5c-dirty (May 20 2020 - 12:42:00 +0530) CPU: rv64imafdc Model: SiFive HiFive Unleashed A00 DRAM: 8 GiB MMC: spi at 10050000:mmc at 0: 0 In: serial at 10010000 Out: serial at 10010000 Err: serial at 10010000 Board serial number should not be 0 !! Net: Warning: ethernet at 10090000 (eth0) using random MAC address - 7a:3f:bf:c1:f9:29 eth0: ethernet at 10090000 Hit any key to stop autoboot: 0 => >> >> gcc version: >> gcc version 8.4.0 (Buildroot 2020.05-git-00692-gd645010af2) > >Regards, >Bin
Hi Jagan, >-----Original Message----- >From: U-Boot <u-boot-bounces at lists.denx.de> On Behalf Of Pragnesh Patel >Sent: 20 May 2020 12:55 >To: Bin Meng <bmeng.cn at gmail.com>; Jagan Teki ><jagan at amarulasolutions.com> >Cc: U-Boot-Denx <u-boot at lists.denx.de>; Atish Patra ><atish.patra at wdc.com>; Palmer Dabbelt <palmerdabbelt at google.com>; Paul >Walmsley <paul.walmsley at sifive.com>; Anup Patel <anup.patel at wdc.com>; >Sagar Kadam <sagar.kadam at sifive.com>; Rick Chen <rick at andestech.com>; >Palmer Dabbelt <palmer at dabbelt.com> >Subject: RE: [PATCH v10 17/18] configs: fu540: Add config options for U-Boot >SPL > >Hi Jagan, > >>-----Original Message----- >>From: Bin Meng <bmeng.cn at gmail.com> >>Sent: 20 May 2020 10:07 >>To: Jagan Teki <jagan at amarulasolutions.com> >>Cc: Pragnesh Patel <pragnesh.patel at sifive.com>; U-Boot-Denx <u- >>boot at lists.denx.de>; Atish Patra <atish.patra at wdc.com>; Palmer Dabbelt >><palmerdabbelt at google.com>; Paul Walmsley ><paul.walmsley at sifive.com>; >>Anup Patel <anup.patel at wdc.com>; Sagar Kadam ><sagar.kadam at sifive.com>; >>Rick Chen <rick at andestech.com>; Palmer Dabbelt <palmer at dabbelt.com> >>Subject: Re: [PATCH v10 17/18] configs: fu540: Add config options for >>U-Boot SPL >> >>[External Email] Do not click links or attachments unless you recognize >>the sender and know the content is safe >> >>Hi Jagan, >> >>On Wed, May 20, 2020 at 12:11 AM Jagan Teki >><jagan at amarulasolutions.com> >>wrote: >>> >>> On Sat, May 16, 2020 at 11:42 AM Pragnesh Patel >>> <pragnesh.patel at sifive.com> wrote: >>> > >>> > Hi Jagan, >>> > >>> > >-----Original Message----- >>> > >From: Jagan Teki <jagan at amarulasolutions.com> >>> > >Sent: 15 May 2020 23:05 >>> > >To: Pragnesh Patel <pragnesh.patel at sifive.com> >>> > >Cc: U-Boot-Denx <u-boot at lists.denx.de>; Atish Patra >>> > ><atish.patra at wdc.com>; Palmer Dabbelt >><palmerdabbelt at google.com>; >>> > >Bin Meng <bmeng.cn at gmail.com>; Paul Walmsley >>> > ><paul.walmsley at sifive.com>; Anup Patel <anup.patel at wdc.com>; >Sagar >>> > >Kadam <sagar.kadam at sifive.com>; Rick Chen <rick at andestech.com>; >>> > >Palmer Dabbelt <palmer at dabbelt.com> >>> > >Subject: Re: [PATCH v10 17/18] configs: fu540: Add config options >>> > >for U-Boot SPL >>> > > >>> > >[External Email] Do not click links or attachments unless you >>> > >recognize the sender and know the content is safe >>> > > >>> > >On Thu, May 14, 2020 at 5:24 PM Pragnesh Patel >>> > ><pragnesh.patel at sifive.com> wrote: >>> > >> >>> > >> With sifive_fu540_defconfig: >>> > >> >>> > >> User can use FSBL or u-boot-spl.bin anyone at a time. >>> > >> >>> > >> For FSBL, >>> > >> fsbl->fw_payload.bin (opensbi + U-Boot) >>> > >> >>> > >> For u-boot-spl.bin, >>> > >> u-boot-spl.bin->FIT image (opensbi + U-Boot proper + dtb) >>> > >> >>> > >> U-Boot SPL will be loaded by ZSBL from SD card (replace fsbl.bin >>> > >> with >>> > >> u-boot-spl.bin) and runs in L2 LIM in machine mode and then load >>> > >> FIT image u-boot.itb from SD card into RAM. >>> > >> >>> > >> U-Boot SPL expects u-boot.itb FIT image at the starting of SD >>> > >> card sector number (0x822) of GUID type >>> > >> "2E54B353-1271-4842-806F- >>> > >E436D6AF6985" >>> > >> >>> > >> Signed-off-by: Pragnesh Patel <pragnesh.patel at sifive.com> >>> > >> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com> >>> > >> Reviewed-by: Jagan Teki <jagan at amarulasolutions.com> >>> > >> --- >>> > >> configs/sifive_fu540_defconfig | 8 ++ >>> > >> doc/board/sifive/fu540.rst | 134 >>+++++++++++++++++++++++++++++++++ >>> > >> 2 files changed, 142 insertions(+) >>> > >> >>> > >> diff --git a/configs/sifive_fu540_defconfig >>> > >> b/configs/sifive_fu540_defconfig index f805aacc7a..8d412f8d6a >>> > >> 100644 >>> > >> --- a/configs/sifive_fu540_defconfig >>> > >> +++ b/configs/sifive_fu540_defconfig >>> > >> @@ -1,6 +1,11 @@ >>> > >> CONFIG_RISCV=y >>> > >> +CONFIG_SPL_GPIO_SUPPORT=y >>> > >> +CONFIG_SYS_MALLOC_F_LEN=0x3000 >>> > >> CONFIG_ENV_SIZE=0x20000 >>> > >> +CONFIG_SPL_MMC_SUPPORT=y >>> > >> CONFIG_NR_DRAM_BANKS=1 >>> > >> +CONFIG_SPL=y >>> > >> +CONFIG_SPL_SPI_SUPPORT=y >>> > >> CONFIG_TARGET_SIFIVE_FU540=y >>> > >> CONFIG_ARCH_RV64I=y >>> > >> CONFIG_RISCV_SMODE=y >>> > >> @@ -9,7 +14,10 @@ CONFIG_FIT=y >>> > >> CONFIG_MISC_INIT_R=y >>> > >> CONFIG_DISPLAY_CPUINFO=y >>> > >> CONFIG_DISPLAY_BOARDINFO=y >>> > >> +CONFIG_SPL_SEPARATE_BSS=y >>> > >> +CONFIG_SPL_YMODEM_SUPPORT=y >>> > >> CONFIG_OF_BOARD_FIXUP=y >>> > >> CONFIG_DEFAULT_DEVICE_TREE="hifive-unleashed-a00" >>> > >> CONFIG_SYS_RELOC_GD_ENV_ADDR=y >>> > >> +CONFIG_SPL_CLK=y >>> > >> CONFIG_DM_MTD=y >>> > >> diff --git a/doc/board/sifive/fu540.rst >>> > >> b/doc/board/sifive/fu540.rst index 610ba87074..89e8d66c56 100644 >>> > >> --- a/doc/board/sifive/fu540.rst >>> > >> +++ b/doc/board/sifive/fu540.rst >>> > >> @@ -31,6 +31,9 @@ TODO: >>> > >> stdout-path = "/soc/serial at 10010000:115200"; >>> > >> }; >>> > >> >>> > >> +Booting from MMC using FSBL >>> > >> +--------------------------- >>> > >> + >>> > >> Building >>> > >> -------- >>> > >> >>> > >> @@ -421,3 +424,134 @@ as well. >>> > >> >>> > >> Please press Enter to activate this console. >>> > >> / # >>> > >> + >>> > >> +Booting from MMC using U-Boot SPL >>> > >> +--------------------------------- >>> > >> + >>> > >> +Building >>> > >> +-------- >>> > >> + >>> > >> +Before building U-Boot SPL, OpenSBI must be built first. >>> > >> +OpenSBI can be cloned and built for FU540 as below: >>> > >> + >>> > >> +.. code-block:: console >>> > >> + >>> > >> + git clone https://github.com/riscv/opensbi.git >>> > >> + cd opensbi >>> > >> + make PLATFORM=generic FW_DYNAMIC=y >>> > >> + >>> > >> +Copy OpenSBI FW_DYNAMIC image >>> > >> +(build/platform/generic/firmware/fw_dynamic.bin) into U-Boot >>> > >> +root directory >>> > >> + >>> > >> +.. code-block:: console >>> > >> + >>> > >> + cp build/platform/generic/firmware/fw_dynamic.bin >>> > >> + <u-boot-dir> >>> > >> + >>> > >> +Now build the U-Boot SPL and U-Boot proper >>> > >> + >>> > >> +.. code-block:: console >>> > >> + >>> > >> + cd <U-Boot-dir> >>> > >> + make sifive_fu540_defconfig >>> > >> + make >>> > >> + >>> > >> +This will generate spl/u-boot-spl.bin and FIT image >>> > >> +(u-boot.itb) >>> > >> + >>> > >> + >>> > >> +Flashing >>> > >> +-------- >>> > >> + >>> > >> +ZSBL loads the U-Boot SPL (u-boot-spl.bin) from a partition >>> > >> +with GUID type >>> > >> +5B193300-FC78-40CD-8002-E86C45580B47 >>> > >> + >>> > >> +U-Boot SPL expects a U-Boot FIT image (u-boot.itb) from a >>> > >> +partition with GUID type 2E54B353-1271-4842-806F-E436D6AF6985 >>> > >> + >>> > >> +FIT image (u-boot.itb) is a combination of fw_dynamic.bin, >>> > >> +u-boot-nodtb.bin and device tree blob >>> > >> +(hifive-unleashed-a00.dtb) >>> > >> + >>> > >> +Format the SD card (make sure the disk has GPT, otherwise use >>> > >> +gdisk to switch) >>> > >> + >>> > >> +.. code-block:: none >>> > >> + >>> > >> + # sudo sgdisk --clear \ >>> > >> + > --set-alignment=2 \ >>> > >> + > --new=1:34:2081 --change-name=1:loader1 >>> > >> + --typecode=1:5B193300- >>> > >FC78-40CD-8002-E86C45580B47 \ >>> > >> + > --new=2:2082:10273 --change-name=2:loader2 -- >>> > >typecode=2:2E54B353-1271-4842-806F-E436D6AF6985 \ >>> > >> + > --new=3:10274: --change-name=3:rootfs >>> > >> + --typecode=3:0FC63DAF- >>> > >8483-4772-8E79-3D69D8477DE4 \ >>> > >> + > /dev/sda >>> > >> + >>> > >> +Program the SD card >>> > >> + >>> > >> +.. code-block:: none >>> > >> + >>> > >> + sudo dd if=spl/u-boot-spl.bin of=/dev/sda seek=34 >>> > >> + sudo dd if=u-boot.itb of=/dev/sda seek=2082 >>> > >> + >>> > >> +Booting >>> > >> +------- >>> > >> +Once you plugin the sdcard and power up, you should see the >>> > >> +U-Boot >>> > >prompt. >>> > >> + >>> > >> +Sample boot log from HiFive Unleashed board >>> > >> +------------------------------------------- >>> > >> + >>> > >> +.. code-block:: none >>> > >> + >>> > >> + U-Boot SPL 2020.04-rc2-00109-g63efc7e07e-dirty (Apr 30 >>> > >> + 2020 - >>> > >13:52:36 +0530) >>> > >> + Trying to boot from MMC1 >>> > >> + >>> > >> + >>> > >> + U-Boot 2020.04-rc2-00109-g63efc7e07e-dirty (Apr 30 2020 >>> > >> + - >>> > >> + 13:52:36 +0530) >>> > >> + >>> > >> + CPU: rv64imafdc >>> > >> + Model: SiFive HiFive Unleashed A00 >>> > >> + DRAM: 8 GiB >>> > >> + MMC: spi at 10050000:mmc at 0: 0 >>> > >> + In: serial at 10010000 >>> > >> + Out: serial at 10010000 >>> > >> + Err: serial at 10010000 >>> > >> + Board serial number should not be 0 !! >>> > >> + Net: >>> > >> + Warning: ethernet at 10090000 (eth0) using random MAC >>> > >> + address - >>> > >96:06:92:18:eb:04 >>> > >> + eth0: ethernet at 10090000 >>> > >> + Hit any key to stop autoboot: 0 >>> > > >>> > >Look like v10 seems to be a change, I can see memory region print? >>> > > >>> > >U-Boot SPL 2020.07-rc1-00540-gd06cdf6989 (May 15 2020 - 23:00:17 >>> > >+0530) >>> > >Trying to boot from MMC1 >>> > > >>> > > >>> > >U-Boot 2020.07-rc1-00540-gd06cdf6989 (May 15 2020 - 23:00:17 >>> > >+0530) >>> > > >>> > >CPU: rv64imafdc >>> > >Model: SiFive HiFive Unleashed A00 >>> > >DRAM: 8 GiB >>> > >No reserved memory region found in source FDT >>> > >MMC: spi at 10050000:mmc at 0: 0 >>> > >In: serial at 10010000 >>> > >Out: serial at 10010000 >>> > >Err: serial at 10010000 >>> > >Net: eth0: ethernet at 10090000 >>> > >Hit any key to stop autoboot: 0 >>> > >>> > I haven't got this "memory region" print, can you please update >>> > your U-Boot and OpenSBI Repo and recheck. >>> >>> I have checked with latest opensbi, still got it. >> >>Do you mean this message? >> >> No reserved memory region found in source FDT >> >>If yes, you need use OpenSBI v0.7. >> >>> >>> U-Boot SPL 2020.07-rc2-00154-gb37b258d49-dirty (May 19 2020 - >>> 21:33:36 >>> +0530) Trying to boot from MMC1 >>> >>> OpenSBI v0.6 >>> ____ _____ ____ _____ >>> / __ \ / ____| _ \_ _| >>> | | | |_ __ ___ _ __ | (___ | |_) || | >>> | | | | '_ \ / _ \ '_ \ \___ \| _ < | | | |__| | |_) | __/ | | >>> |____) | |_) || |_ >>> \____/| .__/ \___|_| |_|_____/|____/_____| >>> | | >>> |_| >>> >>> Platform Name : SiFive Freedom U540 >>> Platform HART Features : RV64ACDFIMSU >>> Platform Max HARTs : 5 >>> Current Hart : 3 >>> Firmware Base : 0x80000000 >>> Firmware Size : 100 KB >>> Runtime SBI Version : 0.2 >>> >>> MIDELEG : 0x0000000000000222 >>> MEDELEG : 0x000000000000b109 >>> PMP0 : 0x0000000080000000-0x000000008001ffff (A) >>> PMP1 : 0x0000000000000000-0x0000007fffffffff (A,R,W,X) >>> >>> >>> U-Boot 2020.07-rc2-00154-gb37b258d49-dirty (May 19 2020 - 21:33:36 >>> +0530) >>> >>> CPU: rv64imafdc >>> Model: SiFive HiFive Unleashed A00 >>> DRAM: 8 GiB >>> No reserved memory region found in source FDT >>> MMC: spi at 10050000:mmc at 0: 0 >>> In: serial at 10010000 >>> Out: serial at 10010000 >>> Err: serial at 10010000 >>> Net: eth0: ethernet at 10090000 >>> Hit any key to stop autoboot: 0 >>> >>> opensbi sha1: >>> 89ba63493c4ce98861144180e408d6db391fd1c3 > >I have updated my U-Boot and OpenSBI repo and recheck., still not getting >this "reserved memory" print. > >Below is my observation from your boot prints: >- It looks like your OpenSBI repo is not updated one. Latest OpenSBI version is >v0.7 . >- you are using "make PLATFORM=sifive/fu540" instead of " make >PLATFORM=generic" > >Can you please rebuild OpenSBI with above suggestion and reconfirm. > >U-Boot sha1: >c2279d784e35fa25ee3a9fa28a74a1ba545f8c1e >(Merge branch '2020-05-18-reduce-size-of-common.h') > >OpenSBI sha1: >89ba63493c4ce98861144180e408d6db391fd1c3 >(include: sbi: Add firmware extension constants) > > >Boot prints: > >U-Boot SPL 2020.07-rc2-00711-g179f936b5c-dirty (May 20 2020 - 12:42:00 >+0530) Trying to boot from MMC1 > >OpenSBI v0.7-59-g89ba634 > ____ _____ ____ _____ > / __ \ / ____| _ \_ _| > | | | |_ __ ___ _ __ | (___ | |_) || | > | | | | '_ \ / _ \ '_ \ \___ \| _ < | | | |__| | |_) | __/ | | |____) | |_) || |_ > \____/| .__/ \___|_| |_|_____/|____/_____| > | | > |_| > >Platform Name : SiFive HiFive Unleashed A00 >Platform Features : timer,mfdeleg >Platform HART Count : 5 >Boot HART ID : 1 >Boot HART ISA : rv64imafdcsu >BOOT HART Features : pmp,scounteren,mcounteren BOOT HART PMP Count : >16 >Firmware Base : 0x80000000 >Firmware Size : 116 KB >Runtime SBI Version : 0.2 > >MIDELEG : 0x0000000000000222 >MEDELEG : 0x000000000000b109 >PMP0 : 0x0000000080000000-0x000000008001ffff (A) >PMP1 : 0x0000000000000000-0x0000007fffffffff (A,R,W,X) > > >U-Boot 2020.07-rc2-00711-g179f936b5c-dirty (May 20 2020 - 12:42:00 +0530) > >CPU: rv64imafdc >Model: SiFive HiFive Unleashed A00 >DRAM: 8 GiB >MMC: spi at 10050000:mmc at 0: 0 >In: serial at 10010000 >Out: serial at 10010000 >Err: serial at 10010000 >Board serial number should not be 0 !! >Net: >Warning: ethernet at 10090000 (eth0) using random MAC address - >7a:3f:bf:c1:f9:29 >eth0: ethernet at 10090000 >Hit any key to stop autoboot: 0 >=> Any comments ? I am planning to send v12. > >>> >>> gcc version: >>> gcc version 8.4.0 (Buildroot 2020.05-git-00692-gd645010af2) >> >>Regards, >>Bin
Hi Pragnesh, On Wed, May 20, 2020 at 9:33 PM Pragnesh Patel <pragnesh.patel at sifive.com> wrote: > > Hi Jagan, > > >-----Original Message----- > >From: U-Boot <u-boot-bounces at lists.denx.de> On Behalf Of Pragnesh Patel > >Sent: 20 May 2020 12:55 > >To: Bin Meng <bmeng.cn at gmail.com>; Jagan Teki > ><jagan at amarulasolutions.com> > >Cc: U-Boot-Denx <u-boot at lists.denx.de>; Atish Patra > ><atish.patra at wdc.com>; Palmer Dabbelt <palmerdabbelt at google.com>; Paul > >Walmsley <paul.walmsley at sifive.com>; Anup Patel <anup.patel at wdc.com>; > >Sagar Kadam <sagar.kadam at sifive.com>; Rick Chen <rick at andestech.com>; > >Palmer Dabbelt <palmer at dabbelt.com> > >Subject: RE: [PATCH v10 17/18] configs: fu540: Add config options for U-Boot > >SPL > > > >Hi Jagan, > > > >>-----Original Message----- > >>From: Bin Meng <bmeng.cn at gmail.com> > >>Sent: 20 May 2020 10:07 > >>To: Jagan Teki <jagan at amarulasolutions.com> > >>Cc: Pragnesh Patel <pragnesh.patel at sifive.com>; U-Boot-Denx <u- > >>boot at lists.denx.de>; Atish Patra <atish.patra at wdc.com>; Palmer Dabbelt > >><palmerdabbelt at google.com>; Paul Walmsley > ><paul.walmsley at sifive.com>; > >>Anup Patel <anup.patel at wdc.com>; Sagar Kadam > ><sagar.kadam at sifive.com>; > >>Rick Chen <rick at andestech.com>; Palmer Dabbelt <palmer at dabbelt.com> > >>Subject: Re: [PATCH v10 17/18] configs: fu540: Add config options for > >>U-Boot SPL > >> > >>[External Email] Do not click links or attachments unless you recognize > >>the sender and know the content is safe > >> > >>Hi Jagan, > >> > >>On Wed, May 20, 2020 at 12:11 AM Jagan Teki > >><jagan at amarulasolutions.com> > >>wrote: > >>> > >>> On Sat, May 16, 2020 at 11:42 AM Pragnesh Patel > >>> <pragnesh.patel at sifive.com> wrote: > >>> > > >>> > Hi Jagan, > >>> > > >>> > >-----Original Message----- > >>> > >From: Jagan Teki <jagan at amarulasolutions.com> > >>> > >Sent: 15 May 2020 23:05 > >>> > >To: Pragnesh Patel <pragnesh.patel at sifive.com> > >>> > >Cc: U-Boot-Denx <u-boot at lists.denx.de>; Atish Patra > >>> > ><atish.patra at wdc.com>; Palmer Dabbelt > >><palmerdabbelt at google.com>; > >>> > >Bin Meng <bmeng.cn at gmail.com>; Paul Walmsley > >>> > ><paul.walmsley at sifive.com>; Anup Patel <anup.patel at wdc.com>; > >Sagar > >>> > >Kadam <sagar.kadam at sifive.com>; Rick Chen <rick at andestech.com>; > >>> > >Palmer Dabbelt <palmer at dabbelt.com> > >>> > >Subject: Re: [PATCH v10 17/18] configs: fu540: Add config options > >>> > >for U-Boot SPL > >>> > > > >>> > >[External Email] Do not click links or attachments unless you > >>> > >recognize the sender and know the content is safe > >>> > > > >>> > >On Thu, May 14, 2020 at 5:24 PM Pragnesh Patel > >>> > ><pragnesh.patel at sifive.com> wrote: > >>> > >> > >>> > >> With sifive_fu540_defconfig: > >>> > >> > >>> > >> User can use FSBL or u-boot-spl.bin anyone at a time. > >>> > >> > >>> > >> For FSBL, > >>> > >> fsbl->fw_payload.bin (opensbi + U-Boot) > >>> > >> > >>> > >> For u-boot-spl.bin, > >>> > >> u-boot-spl.bin->FIT image (opensbi + U-Boot proper + dtb) > >>> > >> > >>> > >> U-Boot SPL will be loaded by ZSBL from SD card (replace fsbl.bin > >>> > >> with > >>> > >> u-boot-spl.bin) and runs in L2 LIM in machine mode and then load > >>> > >> FIT image u-boot.itb from SD card into RAM. > >>> > >> > >>> > >> U-Boot SPL expects u-boot.itb FIT image at the starting of SD > >>> > >> card sector number (0x822) of GUID type > >>> > >> "2E54B353-1271-4842-806F- > >>> > >E436D6AF6985" > >>> > >> > >>> > >> Signed-off-by: Pragnesh Patel <pragnesh.patel at sifive.com> > >>> > >> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com> > >>> > >> Reviewed-by: Jagan Teki <jagan at amarulasolutions.com> > >>> > >> --- > >>> > >> configs/sifive_fu540_defconfig | 8 ++ > >>> > >> doc/board/sifive/fu540.rst | 134 > >>+++++++++++++++++++++++++++++++++ > >>> > >> 2 files changed, 142 insertions(+) > >>> > >> > >>> > >> diff --git a/configs/sifive_fu540_defconfig > >>> > >> b/configs/sifive_fu540_defconfig index f805aacc7a..8d412f8d6a > >>> > >> 100644 > >>> > >> --- a/configs/sifive_fu540_defconfig > >>> > >> +++ b/configs/sifive_fu540_defconfig > >>> > >> @@ -1,6 +1,11 @@ > >>> > >> CONFIG_RISCV=y > >>> > >> +CONFIG_SPL_GPIO_SUPPORT=y > >>> > >> +CONFIG_SYS_MALLOC_F_LEN=0x3000 > >>> > >> CONFIG_ENV_SIZE=0x20000 > >>> > >> +CONFIG_SPL_MMC_SUPPORT=y > >>> > >> CONFIG_NR_DRAM_BANKS=1 > >>> > >> +CONFIG_SPL=y > >>> > >> +CONFIG_SPL_SPI_SUPPORT=y > >>> > >> CONFIG_TARGET_SIFIVE_FU540=y > >>> > >> CONFIG_ARCH_RV64I=y > >>> > >> CONFIG_RISCV_SMODE=y > >>> > >> @@ -9,7 +14,10 @@ CONFIG_FIT=y > >>> > >> CONFIG_MISC_INIT_R=y > >>> > >> CONFIG_DISPLAY_CPUINFO=y > >>> > >> CONFIG_DISPLAY_BOARDINFO=y > >>> > >> +CONFIG_SPL_SEPARATE_BSS=y > >>> > >> +CONFIG_SPL_YMODEM_SUPPORT=y > >>> > >> CONFIG_OF_BOARD_FIXUP=y > >>> > >> CONFIG_DEFAULT_DEVICE_TREE="hifive-unleashed-a00" > >>> > >> CONFIG_SYS_RELOC_GD_ENV_ADDR=y > >>> > >> +CONFIG_SPL_CLK=y > >>> > >> CONFIG_DM_MTD=y > >>> > >> diff --git a/doc/board/sifive/fu540.rst > >>> > >> b/doc/board/sifive/fu540.rst index 610ba87074..89e8d66c56 100644 > >>> > >> --- a/doc/board/sifive/fu540.rst > >>> > >> +++ b/doc/board/sifive/fu540.rst > >>> > >> @@ -31,6 +31,9 @@ TODO: > >>> > >> stdout-path = "/soc/serial at 10010000:115200"; > >>> > >> }; > >>> > >> > >>> > >> +Booting from MMC using FSBL > >>> > >> +--------------------------- > >>> > >> + > >>> > >> Building > >>> > >> -------- > >>> > >> > >>> > >> @@ -421,3 +424,134 @@ as well. > >>> > >> > >>> > >> Please press Enter to activate this console. > >>> > >> / # > >>> > >> + > >>> > >> +Booting from MMC using U-Boot SPL > >>> > >> +--------------------------------- > >>> > >> + > >>> > >> +Building > >>> > >> +-------- > >>> > >> + > >>> > >> +Before building U-Boot SPL, OpenSBI must be built first. > >>> > >> +OpenSBI can be cloned and built for FU540 as below: > >>> > >> + > >>> > >> +.. code-block:: console > >>> > >> + > >>> > >> + git clone https://github.com/riscv/opensbi.git > >>> > >> + cd opensbi > >>> > >> + make PLATFORM=generic FW_DYNAMIC=y > >>> > >> + > >>> > >> +Copy OpenSBI FW_DYNAMIC image > >>> > >> +(build/platform/generic/firmware/fw_dynamic.bin) into U-Boot > >>> > >> +root directory > >>> > >> + > >>> > >> +.. code-block:: console > >>> > >> + > >>> > >> + cp build/platform/generic/firmware/fw_dynamic.bin > >>> > >> + <u-boot-dir> > >>> > >> + > >>> > >> +Now build the U-Boot SPL and U-Boot proper > >>> > >> + > >>> > >> +.. code-block:: console > >>> > >> + > >>> > >> + cd <U-Boot-dir> > >>> > >> + make sifive_fu540_defconfig > >>> > >> + make > >>> > >> + > >>> > >> +This will generate spl/u-boot-spl.bin and FIT image > >>> > >> +(u-boot.itb) > >>> > >> + > >>> > >> + > >>> > >> +Flashing > >>> > >> +-------- > >>> > >> + > >>> > >> +ZSBL loads the U-Boot SPL (u-boot-spl.bin) from a partition > >>> > >> +with GUID type > >>> > >> +5B193300-FC78-40CD-8002-E86C45580B47 > >>> > >> + > >>> > >> +U-Boot SPL expects a U-Boot FIT image (u-boot.itb) from a > >>> > >> +partition with GUID type 2E54B353-1271-4842-806F-E436D6AF6985 > >>> > >> + > >>> > >> +FIT image (u-boot.itb) is a combination of fw_dynamic.bin, > >>> > >> +u-boot-nodtb.bin and device tree blob > >>> > >> +(hifive-unleashed-a00.dtb) > >>> > >> + > >>> > >> +Format the SD card (make sure the disk has GPT, otherwise use > >>> > >> +gdisk to switch) > >>> > >> + > >>> > >> +.. code-block:: none > >>> > >> + > >>> > >> + # sudo sgdisk --clear \ > >>> > >> + > --set-alignment=2 \ > >>> > >> + > --new=1:34:2081 --change-name=1:loader1 > >>> > >> + --typecode=1:5B193300- > >>> > >FC78-40CD-8002-E86C45580B47 \ > >>> > >> + > --new=2:2082:10273 --change-name=2:loader2 -- > >>> > >typecode=2:2E54B353-1271-4842-806F-E436D6AF6985 \ > >>> > >> + > --new=3:10274: --change-name=3:rootfs > >>> > >> + --typecode=3:0FC63DAF- > >>> > >8483-4772-8E79-3D69D8477DE4 \ > >>> > >> + > /dev/sda > >>> > >> + > >>> > >> +Program the SD card > >>> > >> + > >>> > >> +.. code-block:: none > >>> > >> + > >>> > >> + sudo dd if=spl/u-boot-spl.bin of=/dev/sda seek=34 > >>> > >> + sudo dd if=u-boot.itb of=/dev/sda seek=2082 > >>> > >> + > >>> > >> +Booting > >>> > >> +------- > >>> > >> +Once you plugin the sdcard and power up, you should see the > >>> > >> +U-Boot > >>> > >prompt. > >>> > >> + > >>> > >> +Sample boot log from HiFive Unleashed board > >>> > >> +------------------------------------------- > >>> > >> + > >>> > >> +.. code-block:: none > >>> > >> + > >>> > >> + U-Boot SPL 2020.04-rc2-00109-g63efc7e07e-dirty (Apr 30 > >>> > >> + 2020 - > >>> > >13:52:36 +0530) > >>> > >> + Trying to boot from MMC1 > >>> > >> + > >>> > >> + > >>> > >> + U-Boot 2020.04-rc2-00109-g63efc7e07e-dirty (Apr 30 2020 > >>> > >> + - > >>> > >> + 13:52:36 +0530) > >>> > >> + > >>> > >> + CPU: rv64imafdc > >>> > >> + Model: SiFive HiFive Unleashed A00 > >>> > >> + DRAM: 8 GiB > >>> > >> + MMC: spi at 10050000:mmc at 0: 0 > >>> > >> + In: serial at 10010000 > >>> > >> + Out: serial at 10010000 > >>> > >> + Err: serial at 10010000 > >>> > >> + Board serial number should not be 0 !! > >>> > >> + Net: > >>> > >> + Warning: ethernet at 10090000 (eth0) using random MAC > >>> > >> + address - > >>> > >96:06:92:18:eb:04 > >>> > >> + eth0: ethernet at 10090000 > >>> > >> + Hit any key to stop autoboot: 0 > >>> > > > >>> > >Look like v10 seems to be a change, I can see memory region print? > >>> > > > >>> > >U-Boot SPL 2020.07-rc1-00540-gd06cdf6989 (May 15 2020 - 23:00:17 > >>> > >+0530) > >>> > >Trying to boot from MMC1 > >>> > > > >>> > > > >>> > >U-Boot 2020.07-rc1-00540-gd06cdf6989 (May 15 2020 - 23:00:17 > >>> > >+0530) > >>> > > > >>> > >CPU: rv64imafdc > >>> > >Model: SiFive HiFive Unleashed A00 > >>> > >DRAM: 8 GiB > >>> > >No reserved memory region found in source FDT > >>> > >MMC: spi at 10050000:mmc at 0: 0 > >>> > >In: serial at 10010000 > >>> > >Out: serial at 10010000 > >>> > >Err: serial at 10010000 > >>> > >Net: eth0: ethernet at 10090000 > >>> > >Hit any key to stop autoboot: 0 > >>> > > >>> > I haven't got this "memory region" print, can you please update > >>> > your U-Boot and OpenSBI Repo and recheck. > >>> > >>> I have checked with latest opensbi, still got it. > >> > >>Do you mean this message? > >> > >> No reserved memory region found in source FDT > >> > >>If yes, you need use OpenSBI v0.7. > >> > >>> > >>> U-Boot SPL 2020.07-rc2-00154-gb37b258d49-dirty (May 19 2020 - > >>> 21:33:36 > >>> +0530) Trying to boot from MMC1 > >>> > >>> OpenSBI v0.6 > >>> ____ _____ ____ _____ > >>> / __ \ / ____| _ \_ _| > >>> | | | |_ __ ___ _ __ | (___ | |_) || | > >>> | | | | '_ \ / _ \ '_ \ \___ \| _ < | | | |__| | |_) | __/ | | > >>> |____) | |_) || |_ > >>> \____/| .__/ \___|_| |_|_____/|____/_____| > >>> | | > >>> |_| > >>> > >>> Platform Name : SiFive Freedom U540 > >>> Platform HART Features : RV64ACDFIMSU > >>> Platform Max HARTs : 5 > >>> Current Hart : 3 > >>> Firmware Base : 0x80000000 > >>> Firmware Size : 100 KB > >>> Runtime SBI Version : 0.2 > >>> > >>> MIDELEG : 0x0000000000000222 > >>> MEDELEG : 0x000000000000b109 > >>> PMP0 : 0x0000000080000000-0x000000008001ffff (A) > >>> PMP1 : 0x0000000000000000-0x0000007fffffffff (A,R,W,X) > >>> > >>> > >>> U-Boot 2020.07-rc2-00154-gb37b258d49-dirty (May 19 2020 - 21:33:36 > >>> +0530) > >>> > >>> CPU: rv64imafdc > >>> Model: SiFive HiFive Unleashed A00 > >>> DRAM: 8 GiB > >>> No reserved memory region found in source FDT > >>> MMC: spi at 10050000:mmc at 0: 0 > >>> In: serial at 10010000 > >>> Out: serial at 10010000 > >>> Err: serial at 10010000 > >>> Net: eth0: ethernet at 10090000 > >>> Hit any key to stop autoboot: 0 > >>> > >>> opensbi sha1: > >>> 89ba63493c4ce98861144180e408d6db391fd1c3 > > > >I have updated my U-Boot and OpenSBI repo and recheck., still not getting > >this "reserved memory" print. > > > >Below is my observation from your boot prints: > >- It looks like your OpenSBI repo is not updated one. Latest OpenSBI version is > >v0.7 . > >- you are using "make PLATFORM=sifive/fu540" instead of " make > >PLATFORM=generic" > > > >Can you please rebuild OpenSBI with above suggestion and reconfirm. > > > >U-Boot sha1: > >c2279d784e35fa25ee3a9fa28a74a1ba545f8c1e > >(Merge branch '2020-05-18-reduce-size-of-common.h') > > > >OpenSBI sha1: > >89ba63493c4ce98861144180e408d6db391fd1c3 > >(include: sbi: Add firmware extension constants) > > > > > >Boot prints: > > > >U-Boot SPL 2020.07-rc2-00711-g179f936b5c-dirty (May 20 2020 - 12:42:00 > >+0530) Trying to boot from MMC1 > > > >OpenSBI v0.7-59-g89ba634 > > ____ _____ ____ _____ > > / __ \ / ____| _ \_ _| > > | | | |_ __ ___ _ __ | (___ | |_) || | > > | | | | '_ \ / _ \ '_ \ \___ \| _ < | | | |__| | |_) | __/ | | |____) | |_) || |_ > > \____/| .__/ \___|_| |_|_____/|____/_____| > > | | > > |_| > > > >Platform Name : SiFive HiFive Unleashed A00 > >Platform Features : timer,mfdeleg > >Platform HART Count : 5 > >Boot HART ID : 1 > >Boot HART ISA : rv64imafdcsu > >BOOT HART Features : pmp,scounteren,mcounteren BOOT HART PMP Count : > >16 > >Firmware Base : 0x80000000 > >Firmware Size : 116 KB > >Runtime SBI Version : 0.2 > > > >MIDELEG : 0x0000000000000222 > >MEDELEG : 0x000000000000b109 > >PMP0 : 0x0000000080000000-0x000000008001ffff (A) > >PMP1 : 0x0000000000000000-0x0000007fffffffff (A,R,W,X) > > > > > >U-Boot 2020.07-rc2-00711-g179f936b5c-dirty (May 20 2020 - 12:42:00 +0530) > > > >CPU: rv64imafdc > >Model: SiFive HiFive Unleashed A00 > >DRAM: 8 GiB > >MMC: spi at 10050000:mmc at 0: 0 > >In: serial at 10010000 > >Out: serial at 10010000 > >Err: serial at 10010000 > >Board serial number should not be 0 !! > >Net: > >Warning: ethernet at 10090000 (eth0) using random MAC address - > >7a:3f:bf:c1:f9:29 > >eth0: ethernet at 10090000 > >Hit any key to stop autoboot: 0 > >=> > > Any comments ? I am planning to send v12. I did not see that. But I see your log has > >Warning: ethernet at 10090000 (eth0) using random MAC address - 7a:3f:bf:c1:f9:29 and I did not see that. This means that OTP driver does not work on your board? Regards, Bin
Hi Bin, >-----Original Message----- >From: Bin Meng <bmeng.cn at gmail.com> >Sent: 20 May 2020 19:14 >To: Pragnesh Patel <pragnesh.patel at sifive.com> >Cc: Jagan Teki <jagan at amarulasolutions.com>; U-Boot-Denx <u- >boot at lists.denx.de>; Atish Patra <atish.patra at wdc.com>; Palmer Dabbelt ><palmerdabbelt at google.com>; Paul Walmsley <paul.walmsley at sifive.com>; >Anup Patel <anup.patel at wdc.com>; Sagar Kadam ><sagar.kadam at sifive.com>; Rick Chen <rick at andestech.com>; Palmer >Dabbelt <palmer at dabbelt.com> >Subject: Re: [PATCH v10 17/18] configs: fu540: Add config options for U-Boot >SPL > >[External Email] Do not click links or attachments unless you recognize the >sender and know the content is safe > >Hi Pragnesh, > >On Wed, May 20, 2020 at 9:33 PM Pragnesh Patel ><pragnesh.patel at sifive.com> wrote: >> >> Hi Jagan, >> >> >-----Original Message----- >> >From: U-Boot <u-boot-bounces at lists.denx.de> On Behalf Of Pragnesh >> >Patel >> >Sent: 20 May 2020 12:55 >> >To: Bin Meng <bmeng.cn at gmail.com>; Jagan Teki >> ><jagan at amarulasolutions.com> >> >Cc: U-Boot-Denx <u-boot at lists.denx.de>; Atish Patra >> ><atish.patra at wdc.com>; Palmer Dabbelt <palmerdabbelt at google.com>; >> >Paul Walmsley <paul.walmsley at sifive.com>; Anup Patel >> ><anup.patel at wdc.com>; Sagar Kadam <sagar.kadam at sifive.com>; Rick >Chen >> ><rick at andestech.com>; Palmer Dabbelt <palmer at dabbelt.com> >> >Subject: RE: [PATCH v10 17/18] configs: fu540: Add config options for >> >U-Boot SPL >> > >> >Hi Jagan, >> > >> >>-----Original Message----- >> >>From: Bin Meng <bmeng.cn at gmail.com> >> >>Sent: 20 May 2020 10:07 >> >>To: Jagan Teki <jagan at amarulasolutions.com> >> >>Cc: Pragnesh Patel <pragnesh.patel at sifive.com>; U-Boot-Denx <u- >> >>boot at lists.denx.de>; Atish Patra <atish.patra at wdc.com>; Palmer >> >>Dabbelt <palmerdabbelt at google.com>; Paul Walmsley >> ><paul.walmsley at sifive.com>; >> >>Anup Patel <anup.patel at wdc.com>; Sagar Kadam >> ><sagar.kadam at sifive.com>; >> >>Rick Chen <rick at andestech.com>; Palmer Dabbelt ><palmer at dabbelt.com> >> >>Subject: Re: [PATCH v10 17/18] configs: fu540: Add config options >> >>for U-Boot SPL >> >> >> >>[External Email] Do not click links or attachments unless you >> >>recognize the sender and know the content is safe >> >> >> >>Hi Jagan, >> >> >> >>On Wed, May 20, 2020 at 12:11 AM Jagan Teki >> >><jagan at amarulasolutions.com> >> >>wrote: >> >>> >> >>> On Sat, May 16, 2020 at 11:42 AM Pragnesh Patel >> >>> <pragnesh.patel at sifive.com> wrote: >> >>> > >> >>> > Hi Jagan, >> >>> > >> >>> > >-----Original Message----- >> >>> > >From: Jagan Teki <jagan at amarulasolutions.com> >> >>> > >Sent: 15 May 2020 23:05 >> >>> > >To: Pragnesh Patel <pragnesh.patel at sifive.com> >> >>> > >Cc: U-Boot-Denx <u-boot at lists.denx.de>; Atish Patra >> >>> > ><atish.patra at wdc.com>; Palmer Dabbelt >> >><palmerdabbelt at google.com>; >> >>> > >Bin Meng <bmeng.cn at gmail.com>; Paul Walmsley >> >>> > ><paul.walmsley at sifive.com>; Anup Patel <anup.patel at wdc.com>; >> >Sagar >> >>> > >Kadam <sagar.kadam at sifive.com>; Rick Chen ><rick at andestech.com>; >> >>> > >Palmer Dabbelt <palmer at dabbelt.com> >> >>> > >Subject: Re: [PATCH v10 17/18] configs: fu540: Add config >> >>> > >options for U-Boot SPL >> >>> > > >> >>> > >[External Email] Do not click links or attachments unless you >> >>> > >recognize the sender and know the content is safe >> >>> > > >> >>> > >On Thu, May 14, 2020 at 5:24 PM Pragnesh Patel >> >>> > ><pragnesh.patel at sifive.com> wrote: >> >>> > >> >> >>> > >> With sifive_fu540_defconfig: >> >>> > >> >> >>> > >> User can use FSBL or u-boot-spl.bin anyone at a time. >> >>> > >> >> >>> > >> For FSBL, >> >>> > >> fsbl->fw_payload.bin (opensbi + U-Boot) >> >>> > >> >> >>> > >> For u-boot-spl.bin, >> >>> > >> u-boot-spl.bin->FIT image (opensbi + U-Boot proper + dtb) >> >>> > >> >> >>> > >> U-Boot SPL will be loaded by ZSBL from SD card (replace >> >>> > >> fsbl.bin with >> >>> > >> u-boot-spl.bin) and runs in L2 LIM in machine mode and then >> >>> > >> load FIT image u-boot.itb from SD card into RAM. >> >>> > >> >> >>> > >> U-Boot SPL expects u-boot.itb FIT image at the starting of SD >> >>> > >> card sector number (0x822) of GUID type >> >>> > >> "2E54B353-1271-4842-806F- >> >>> > >E436D6AF6985" >> >>> > >> >> >>> > >> Signed-off-by: Pragnesh Patel <pragnesh.patel at sifive.com> >> >>> > >> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com> >> >>> > >> Reviewed-by: Jagan Teki <jagan at amarulasolutions.com> >> >>> > >> --- >> >>> > >> configs/sifive_fu540_defconfig | 8 ++ >> >>> > >> doc/board/sifive/fu540.rst | 134 >> >>+++++++++++++++++++++++++++++++++ >> >>> > >> 2 files changed, 142 insertions(+) >> >>> > >> >> >>> > >> diff --git a/configs/sifive_fu540_defconfig >> >>> > >> b/configs/sifive_fu540_defconfig index f805aacc7a..8d412f8d6a >> >>> > >> 100644 >> >>> > >> --- a/configs/sifive_fu540_defconfig >> >>> > >> +++ b/configs/sifive_fu540_defconfig >> >>> > >> @@ -1,6 +1,11 @@ >> >>> > >> CONFIG_RISCV=y >> >>> > >> +CONFIG_SPL_GPIO_SUPPORT=y >> >>> > >> +CONFIG_SYS_MALLOC_F_LEN=0x3000 >> >>> > >> CONFIG_ENV_SIZE=0x20000 >> >>> > >> +CONFIG_SPL_MMC_SUPPORT=y >> >>> > >> CONFIG_NR_DRAM_BANKS=1 >> >>> > >> +CONFIG_SPL=y >> >>> > >> +CONFIG_SPL_SPI_SUPPORT=y >> >>> > >> CONFIG_TARGET_SIFIVE_FU540=y CONFIG_ARCH_RV64I=y >> >>> > >> CONFIG_RISCV_SMODE=y @@ -9,7 +14,10 @@ CONFIG_FIT=y >> >>> > >> CONFIG_MISC_INIT_R=y CONFIG_DISPLAY_CPUINFO=y >> >>> > >> CONFIG_DISPLAY_BOARDINFO=y >> >>> > >> +CONFIG_SPL_SEPARATE_BSS=y >> >>> > >> +CONFIG_SPL_YMODEM_SUPPORT=y >> >>> > >> CONFIG_OF_BOARD_FIXUP=y >> >>> > >> CONFIG_DEFAULT_DEVICE_TREE="hifive-unleashed-a00" >> >>> > >> CONFIG_SYS_RELOC_GD_ENV_ADDR=y >> >>> > >> +CONFIG_SPL_CLK=y >> >>> > >> CONFIG_DM_MTD=y >> >>> > >> diff --git a/doc/board/sifive/fu540.rst >> >>> > >> b/doc/board/sifive/fu540.rst index 610ba87074..89e8d66c56 >> >>> > >> 100644 >> >>> > >> --- a/doc/board/sifive/fu540.rst >> >>> > >> +++ b/doc/board/sifive/fu540.rst >> >>> > >> @@ -31,6 +31,9 @@ TODO: >> >>> > >> stdout-path = "/soc/serial at 10010000:115200"; >> >>> > >> }; >> >>> > >> >> >>> > >> +Booting from MMC using FSBL >> >>> > >> +--------------------------- >> >>> > >> + >> >>> > >> Building >> >>> > >> -------- >> >>> > >> >> >>> > >> @@ -421,3 +424,134 @@ as well. >> >>> > >> >> >>> > >> Please press Enter to activate this console. >> >>> > >> / # >> >>> > >> + >> >>> > >> +Booting from MMC using U-Boot SPL >> >>> > >> +--------------------------------- >> >>> > >> + >> >>> > >> +Building >> >>> > >> +-------- >> >>> > >> + >> >>> > >> +Before building U-Boot SPL, OpenSBI must be built first. >> >>> > >> +OpenSBI can be cloned and built for FU540 as below: >> >>> > >> + >> >>> > >> +.. code-block:: console >> >>> > >> + >> >>> > >> + git clone https://github.com/riscv/opensbi.git >> >>> > >> + cd opensbi >> >>> > >> + make PLATFORM=generic FW_DYNAMIC=y >> >>> > >> + >> >>> > >> +Copy OpenSBI FW_DYNAMIC image >> >>> > >> +(build/platform/generic/firmware/fw_dynamic.bin) into U-Boot >> >>> > >> +root directory >> >>> > >> + >> >>> > >> +.. code-block:: console >> >>> > >> + >> >>> > >> + cp build/platform/generic/firmware/fw_dynamic.bin >> >>> > >> + <u-boot-dir> >> >>> > >> + >> >>> > >> +Now build the U-Boot SPL and U-Boot proper >> >>> > >> + >> >>> > >> +.. code-block:: console >> >>> > >> + >> >>> > >> + cd <U-Boot-dir> >> >>> > >> + make sifive_fu540_defconfig >> >>> > >> + make >> >>> > >> + >> >>> > >> +This will generate spl/u-boot-spl.bin and FIT image >> >>> > >> +(u-boot.itb) >> >>> > >> + >> >>> > >> + >> >>> > >> +Flashing >> >>> > >> +-------- >> >>> > >> + >> >>> > >> +ZSBL loads the U-Boot SPL (u-boot-spl.bin) from a partition >> >>> > >> +with GUID type >> >>> > >> +5B193300-FC78-40CD-8002-E86C45580B47 >> >>> > >> + >> >>> > >> +U-Boot SPL expects a U-Boot FIT image (u-boot.itb) from a >> >>> > >> +partition with GUID type >> >>> > >> +2E54B353-1271-4842-806F-E436D6AF6985 >> >>> > >> + >> >>> > >> +FIT image (u-boot.itb) is a combination of fw_dynamic.bin, >> >>> > >> +u-boot-nodtb.bin and device tree blob >> >>> > >> +(hifive-unleashed-a00.dtb) >> >>> > >> + >> >>> > >> +Format the SD card (make sure the disk has GPT, otherwise >> >>> > >> +use gdisk to switch) >> >>> > >> + >> >>> > >> +.. code-block:: none >> >>> > >> + >> >>> > >> + # sudo sgdisk --clear \ >> >>> > >> + > --set-alignment=2 \ >> >>> > >> + > --new=1:34:2081 --change-name=1:loader1 >> >>> > >> + --typecode=1:5B193300- >> >>> > >FC78-40CD-8002-E86C45580B47 \ >> >>> > >> + > --new=2:2082:10273 --change-name=2:loader2 -- >> >>> > >typecode=2:2E54B353-1271-4842-806F-E436D6AF6985 \ >> >>> > >> + > --new=3:10274: --change-name=3:rootfs >> >>> > >> + --typecode=3:0FC63DAF- >> >>> > >8483-4772-8E79-3D69D8477DE4 \ >> >>> > >> + > /dev/sda >> >>> > >> + >> >>> > >> +Program the SD card >> >>> > >> + >> >>> > >> +.. code-block:: none >> >>> > >> + >> >>> > >> + sudo dd if=spl/u-boot-spl.bin of=/dev/sda seek=34 >> >>> > >> + sudo dd if=u-boot.itb of=/dev/sda seek=2082 >> >>> > >> + >> >>> > >> +Booting >> >>> > >> +------- >> >>> > >> +Once you plugin the sdcard and power up, you should see the >> >>> > >> +U-Boot >> >>> > >prompt. >> >>> > >> + >> >>> > >> +Sample boot log from HiFive Unleashed board >> >>> > >> +------------------------------------------- >> >>> > >> + >> >>> > >> +.. code-block:: none >> >>> > >> + >> >>> > >> + U-Boot SPL 2020.04-rc2-00109-g63efc7e07e-dirty (Apr >> >>> > >> + 30 >> >>> > >> + 2020 - >> >>> > >13:52:36 +0530) >> >>> > >> + Trying to boot from MMC1 >> >>> > >> + >> >>> > >> + >> >>> > >> + U-Boot 2020.04-rc2-00109-g63efc7e07e-dirty (Apr 30 >> >>> > >> + 2020 >> >>> > >> + - >> >>> > >> + 13:52:36 +0530) >> >>> > >> + >> >>> > >> + CPU: rv64imafdc >> >>> > >> + Model: SiFive HiFive Unleashed A00 >> >>> > >> + DRAM: 8 GiB >> >>> > >> + MMC: spi at 10050000:mmc at 0: 0 >> >>> > >> + In: serial at 10010000 >> >>> > >> + Out: serial at 10010000 >> >>> > >> + Err: serial at 10010000 >> >>> > >> + Board serial number should not be 0 !! >> >>> > >> + Net: >> >>> > >> + Warning: ethernet at 10090000 (eth0) using random MAC >> >>> > >> + address - >> >>> > >96:06:92:18:eb:04 >> >>> > >> + eth0: ethernet at 10090000 >> >>> > >> + Hit any key to stop autoboot: 0 >> >>> > > >> >>> > >Look like v10 seems to be a change, I can see memory region print? >> >>> > > >> >>> > >U-Boot SPL 2020.07-rc1-00540-gd06cdf6989 (May 15 2020 - >> >>> > >23:00:17 >> >>> > >+0530) >> >>> > >Trying to boot from MMC1 >> >>> > > >> >>> > > >> >>> > >U-Boot 2020.07-rc1-00540-gd06cdf6989 (May 15 2020 - 23:00:17 >> >>> > >+0530) >> >>> > > >> >>> > >CPU: rv64imafdc >> >>> > >Model: SiFive HiFive Unleashed A00 >> >>> > >DRAM: 8 GiB >> >>> > >No reserved memory region found in source FDT >> >>> > >MMC: spi at 10050000:mmc at 0: 0 >> >>> > >In: serial at 10010000 >> >>> > >Out: serial at 10010000 >> >>> > >Err: serial at 10010000 >> >>> > >Net: eth0: ethernet at 10090000 >> >>> > >Hit any key to stop autoboot: 0 >> >>> > >> >>> > I haven't got this "memory region" print, can you please update >> >>> > your U-Boot and OpenSBI Repo and recheck. >> >>> >> >>> I have checked with latest opensbi, still got it. >> >> >> >>Do you mean this message? >> >> >> >> No reserved memory region found in source FDT >> >> >> >>If yes, you need use OpenSBI v0.7. >> >> >> >>> >> >>> U-Boot SPL 2020.07-rc2-00154-gb37b258d49-dirty (May 19 2020 - >> >>> 21:33:36 >> >>> +0530) Trying to boot from MMC1 >> >>> >> >>> OpenSBI v0.6 >> >>> ____ _____ ____ _____ >> >>> / __ \ / ____| _ \_ _| >> >>> | | | |_ __ ___ _ __ | (___ | |_) || | >> >>> | | | | '_ \ / _ \ '_ \ \___ \| _ < | | | |__| | |_) | __/ | >> >>> | >> >>> |____) | |_) || |_ >> >>> \____/| .__/ \___|_| |_|_____/|____/_____| >> >>> | | >> >>> |_| >> >>> >> >>> Platform Name : SiFive Freedom U540 >> >>> Platform HART Features : RV64ACDFIMSU >> >>> Platform Max HARTs : 5 >> >>> Current Hart : 3 >> >>> Firmware Base : 0x80000000 >> >>> Firmware Size : 100 KB >> >>> Runtime SBI Version : 0.2 >> >>> >> >>> MIDELEG : 0x0000000000000222 >> >>> MEDELEG : 0x000000000000b109 >> >>> PMP0 : 0x0000000080000000-0x000000008001ffff (A) >> >>> PMP1 : 0x0000000000000000-0x0000007fffffffff (A,R,W,X) >> >>> >> >>> >> >>> U-Boot 2020.07-rc2-00154-gb37b258d49-dirty (May 19 2020 - 21:33:36 >> >>> +0530) >> >>> >> >>> CPU: rv64imafdc >> >>> Model: SiFive HiFive Unleashed A00 >> >>> DRAM: 8 GiB >> >>> No reserved memory region found in source FDT >> >>> MMC: spi at 10050000:mmc at 0: 0 >> >>> In: serial at 10010000 >> >>> Out: serial at 10010000 >> >>> Err: serial at 10010000 >> >>> Net: eth0: ethernet at 10090000 >> >>> Hit any key to stop autoboot: 0 >> >>> >> >>> opensbi sha1: >> >>> 89ba63493c4ce98861144180e408d6db391fd1c3 >> > >> >I have updated my U-Boot and OpenSBI repo and recheck., still not >> >getting this "reserved memory" print. >> > >> >Below is my observation from your boot prints: >> >- It looks like your OpenSBI repo is not updated one. Latest OpenSBI >> >version is >> >v0.7 . >> >- you are using "make PLATFORM=sifive/fu540" instead of " make >> >PLATFORM=generic" >> > >> >Can you please rebuild OpenSBI with above suggestion and reconfirm. >> > >> >U-Boot sha1: >> >c2279d784e35fa25ee3a9fa28a74a1ba545f8c1e >> >(Merge branch '2020-05-18-reduce-size-of-common.h') >> > >> >OpenSBI sha1: >> >89ba63493c4ce98861144180e408d6db391fd1c3 >> >(include: sbi: Add firmware extension constants) >> > >> > >> >Boot prints: >> > >> >U-Boot SPL 2020.07-rc2-00711-g179f936b5c-dirty (May 20 2020 - >> >12:42:00 >> >+0530) Trying to boot from MMC1 >> > >> >OpenSBI v0.7-59-g89ba634 >> > ____ _____ ____ _____ >> > / __ \ / ____| _ \_ _| >> > | | | |_ __ ___ _ __ | (___ | |_) || | >> > | | | | '_ \ / _ \ '_ \ \___ \| _ < | | | |__| | |_) | __/ | | >> > | | |____) | |_) || |_ >> > \____/| .__/ \___|_| |_|_____/|____/_____| >> > | | >> > |_| >> > >> >Platform Name : SiFive HiFive Unleashed A00 >> >Platform Features : timer,mfdeleg >> >Platform HART Count : 5 >> >Boot HART ID : 1 >> >Boot HART ISA : rv64imafdcsu >> >BOOT HART Features : pmp,scounteren,mcounteren BOOT HART PMP >Count : >> >16 >> >Firmware Base : 0x80000000 >> >Firmware Size : 116 KB >> >Runtime SBI Version : 0.2 >> > >> >MIDELEG : 0x0000000000000222 >> >MEDELEG : 0x000000000000b109 >> >PMP0 : 0x0000000080000000-0x000000008001ffff (A) >> >PMP1 : 0x0000000000000000-0x0000007fffffffff (A,R,W,X) >> > >> > >> >U-Boot 2020.07-rc2-00711-g179f936b5c-dirty (May 20 2020 - 12:42:00 >> >+0530) >> > >> >CPU: rv64imafdc >> >Model: SiFive HiFive Unleashed A00 >> >DRAM: 8 GiB >> >MMC: spi at 10050000:mmc at 0: 0 >> >In: serial at 10010000 >> >Out: serial at 10010000 >> >Err: serial at 10010000 >> >Board serial number should not be 0 !! >> >Net: >> >Warning: ethernet at 10090000 (eth0) using random MAC address - >> >7a:3f:bf:c1:f9:29 >> >eth0: ethernet at 10090000 >> >Hit any key to stop autoboot: 0 >> >=> >> >> Any comments ? I am planning to send v12. > >I did not see that. But I see your log has > >> >Warning: ethernet at 10090000 (eth0) using random MAC address - >> >7a:3f:bf:c1:f9:29 > >and I did not see that. This means that OTP driver does not work on your >board? No OTP driver works perfectly fine, I have tested both read and write. By mistake, I overwrite my board serial number that's why it shows " Board serial number should not be 0 !!" and ethernet mac address depends on serial number so got that warning " Warning: ethernet at 10090000 (eth0) using random MAC address -" This works perfectly fine on other boards. > >Regards, >Bin
diff --git a/configs/sifive_fu540_defconfig b/configs/sifive_fu540_defconfig index f805aacc7a..8d412f8d6a 100644 --- a/configs/sifive_fu540_defconfig +++ b/configs/sifive_fu540_defconfig @@ -1,6 +1,11 @@ CONFIG_RISCV=y +CONFIG_SPL_GPIO_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x3000 CONFIG_ENV_SIZE=0x20000 +CONFIG_SPL_MMC_SUPPORT=y CONFIG_NR_DRAM_BANKS=1 +CONFIG_SPL=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_TARGET_SIFIVE_FU540=y CONFIG_ARCH_RV64I=y CONFIG_RISCV_SMODE=y @@ -9,7 +14,10 @@ CONFIG_FIT=y CONFIG_MISC_INIT_R=y CONFIG_DISPLAY_CPUINFO=y CONFIG_DISPLAY_BOARDINFO=y +CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_OF_BOARD_FIXUP=y CONFIG_DEFAULT_DEVICE_TREE="hifive-unleashed-a00" CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_SPL_CLK=y CONFIG_DM_MTD=y diff --git a/doc/board/sifive/fu540.rst b/doc/board/sifive/fu540.rst index 610ba87074..89e8d66c56 100644 --- a/doc/board/sifive/fu540.rst +++ b/doc/board/sifive/fu540.rst @@ -31,6 +31,9 @@ TODO: stdout-path = "/soc/serial at 10010000:115200"; }; +Booting from MMC using FSBL +--------------------------- + Building -------- @@ -421,3 +424,134 @@ as well. Please press Enter to activate this console. / # + +Booting from MMC using U-Boot SPL +--------------------------------- + +Building +-------- + +Before building U-Boot SPL, OpenSBI must be built first. OpenSBI can be +cloned and built for FU540 as below: + +.. code-block:: console + + git clone https://github.com/riscv/opensbi.git + cd opensbi + make PLATFORM=generic FW_DYNAMIC=y + +Copy OpenSBI FW_DYNAMIC image +(build/platform/generic/firmware/fw_dynamic.bin) into U-Boot +root directory + +.. code-block:: console + + cp build/platform/generic/firmware/fw_dynamic.bin <u-boot-dir> + +Now build the U-Boot SPL and U-Boot proper + +.. code-block:: console + + cd <U-Boot-dir> + make sifive_fu540_defconfig + make + +This will generate spl/u-boot-spl.bin and FIT image (u-boot.itb) + + +Flashing +-------- + +ZSBL loads the U-Boot SPL (u-boot-spl.bin) from a partition with GUID type +5B193300-FC78-40CD-8002-E86C45580B47 + +U-Boot SPL expects a U-Boot FIT image (u-boot.itb) from a partition with GUID +type 2E54B353-1271-4842-806F-E436D6AF6985 + +FIT image (u-boot.itb) is a combination of fw_dynamic.bin, u-boot-nodtb.bin and +device tree blob (hifive-unleashed-a00.dtb) + +Format the SD card (make sure the disk has GPT, otherwise use gdisk to switch) + +.. code-block:: none + + # sudo sgdisk --clear \ + > --set-alignment=2 \ + > --new=1:34:2081 --change-name=1:loader1 --typecode=1:5B193300-FC78-40CD-8002-E86C45580B47 \ + > --new=2:2082:10273 --change-name=2:loader2 --typecode=2:2E54B353-1271-4842-806F-E436D6AF6985 \ + > --new=3:10274: --change-name=3:rootfs --typecode=3:0FC63DAF-8483-4772-8E79-3D69D8477DE4 \ + > /dev/sda + +Program the SD card + +.. code-block:: none + + sudo dd if=spl/u-boot-spl.bin of=/dev/sda seek=34 + sudo dd if=u-boot.itb of=/dev/sda seek=2082 + +Booting +------- +Once you plugin the sdcard and power up, you should see the U-Boot prompt. + +Sample boot log from HiFive Unleashed board +------------------------------------------- + +.. code-block:: none + + U-Boot SPL 2020.04-rc2-00109-g63efc7e07e-dirty (Apr 30 2020 - 13:52:36 +0530) + Trying to boot from MMC1 + + + U-Boot 2020.04-rc2-00109-g63efc7e07e-dirty (Apr 30 2020 - 13:52:36 +0530) + + CPU: rv64imafdc + Model: SiFive HiFive Unleashed A00 + DRAM: 8 GiB + MMC: spi at 10050000:mmc at 0: 0 + In: serial at 10010000 + Out: serial at 10010000 + Err: serial at 10010000 + Board serial number should not be 0 !! + Net: + Warning: ethernet at 10090000 (eth0) using random MAC address - 96:06:92:18:eb:04 + eth0: ethernet at 10090000 + Hit any key to stop autoboot: 0 + => version + U-Boot 2020.04-rc2-00109-g63efc7e07e-dirty (Apr 30 2020 - 13:52:36 +0530) + + riscv64-unknown-linux-gnu-gcc (crosstool-NG 1.24.0.37-3f461da) 9.2.0 + GNU ld (crosstool-NG 1.24.0.37-3f461da) 2.32 + => mmc info + Device: spi at 10050000:mmc at 0 + Manufacturer ID: 3 + OEM: 5344 + Name: SC16G + Bus Speed: 20000000 + Mode: SD Legacy + Rd Block Len: 512 + SD version 2.0 + High Capacity: Yes + Capacity: 14.8 GiB + Bus Width: 1-bit + Erase Group Size: 512 Bytes + => mmc part + + Partition Map for MMC device 0 -- Partition Type: EFI + + Part Start LBA End LBA Name + Attributes + Type GUID + Partition GUID + 1 0x00000022 0x00000821 "loader1" + attrs: 0x0000000000000000 + type: 5b193300-fc78-40cd-8002-e86c45580b47 + guid: 66e2b5d2-74db-4df8-ad6f-694b3617f87f + 2 0x00000822 0x00002821 "loader2" + attrs: 0x0000000000000000 + type: 2e54b353-1271-4842-806f-e436d6af6985 + guid: 8befaeaf-bca0-435d-b002-e201f37c0a2f + 3 0x00002822 0x01dacbde "rootfs" + attrs: 0x0000000000000000 + type: 0fc63daf-8483-4772-8e79-3d69d8477de4 + type: linux + guid: 9faa81b6-39b1-4418-af5e-89c48f29c20d