From patchwork Wed May 13 07:13:30 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Frank Wang X-Patchwork-Id: 245710 List-Id: U-Boot discussion From: frank.wang at rock-chips.com (Frank Wang) Date: Wed, 13 May 2020 15:13:30 +0800 Subject: [PATCH v5 02/16] clk: rk3399: Set empty for TCPHY assigned-clocks In-Reply-To: <20200513071344.5430-1-frank.wang@rock-chips.com> References: <20200513071344.5430-1-frank.wang@rock-chips.com> Message-ID: <20200513071344.5430-3-frank.wang@rock-chips.com> From: Jagan Teki Due to v5.7-rc1 sync the SD controller nodes in rk3399.dtsi have SCLK_UPHY0_TCPDCORE, SCLK_UPHY1_TCPDCORE assigned-clocks which are usually required for Linux and don't require to handle them in U-Boot. assigned-clocks = <&cru SCLK_UPHY0_TCPDCORE>; assigned-clocks = <&cru SCLK_UPHY1_TCPDCORE>; So, mark them as empty in clock otherwise device probe on those typec phy driver would fail. Signed-off-by: Jagan Teki Reviewed-by: Kever Yang --- drivers/clk/rockchip/clk_rk3399.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/clk/rockchip/clk_rk3399.c b/drivers/clk/rockchip/clk_rk3399.c index b53f2f984e..98fc6a3267 100644 --- a/drivers/clk/rockchip/clk_rk3399.c +++ b/drivers/clk/rockchip/clk_rk3399.c @@ -997,6 +997,8 @@ static ulong rk3399_clk_set_rate(struct clk *clk, ulong rate) case ACLK_VOP1: case HCLK_VOP1: case HCLK_SD: + case SCLK_UPHY0_TCPDCORE: + case SCLK_UPHY1_TCPDCORE: /** * assigned-clocks handling won't require for vopl, so * return 0 to satisfy clk_set_defaults during device probe.