diff mbox series

[30/36] bdinfo: arm: Move ARM-specific info into its own file

Message ID 20200504231732.98778-22-sjg@chromium.org
State New
Headers show
Series Tidy up the 'bd' command. | expand

Commit Message

Simon Glass May 4, 2020, 11:17 p.m. UTC 
We don't really want to have ARM-specific code in a generic file. Create
a new arch-specific function to hold it, and move it into that.

Make the function weak so that any arch can implement it.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 arch/arm/lib/Makefile |  1 +
 arch/arm/lib/bdinfo.c | 51 +++++++++++++++++++++++++++++++++++++++++++
 cmd/bdinfo.c          | 44 +++++--------------------------------
 include/init.h        |  3 +++
 4 files changed, 61 insertions(+), 38 deletions(-)
 create mode 100644 arch/arm/lib/bdinfo.c

Comments

Bin Meng May 6, 2020, 8:10 a.m. UTC | #1 
On Tue, May 5, 2020 at 7:19 AM Simon Glass <sjg at chromium.org> wrote:
>
> We don't really want to have ARM-specific code in a generic file. Create
> a new arch-specific function to hold it, and move it into that.
>
> Make the function weak so that any arch can implement it.
>
> Signed-off-by: Simon Glass <sjg at chromium.org>
> ---
>
>  arch/arm/lib/Makefile |  1 +
>  arch/arm/lib/bdinfo.c | 51 +++++++++++++++++++++++++++++++++++++++++++
>  cmd/bdinfo.c          | 44 +++++--------------------------------
>  include/init.h        |  3 +++
>  4 files changed, 61 insertions(+), 38 deletions(-)
>  create mode 100644 arch/arm/lib/bdinfo.c
>

Reviewed-by: Bin Meng <bmeng.cn at gmail.com>
Daniel Schwierzeck May 6, 2020, 4:10 p.m. UTC | #2 
Am 05.05.20 um 01:17 schrieb Simon Glass:
> We don't really want to have ARM-specific code in a generic file. Create
> a new arch-specific function to hold it, and move it into that.
> 
> Make the function weak so that any arch can implement it.
> 
> Signed-off-by: Simon Glass <sjg at chromium.org>
> ---
> 
>  arch/arm/lib/Makefile |  1 +
>  arch/arm/lib/bdinfo.c | 51 +++++++++++++++++++++++++++++++++++++++++++
>  cmd/bdinfo.c          | 44 +++++--------------------------------
>  include/init.h        |  3 +++
>  4 files changed, 61 insertions(+), 38 deletions(-)
>  create mode 100644 arch/arm/lib/bdinfo.c
> 
> diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
> index b839aa7a50..27b12e7f2b 100644
> --- a/arch/arm/lib/Makefile
> +++ b/arch/arm/lib/Makefile
> @@ -43,6 +43,7 @@ obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMSET) += memset.o
>  obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMCPY) += memcpy.o
>  obj-$(CONFIG_SEMIHOSTING) += semihosting.o
>  
> +obj-y	+= bdinfo.o
>  obj-y	+= sections.o
>  obj-y	+= stack.o
>  ifdef CONFIG_CPU_V7M
> diff --git a/arch/arm/lib/bdinfo.c b/arch/arm/lib/bdinfo.c
> new file mode 100644
> index 0000000000..ce8edd0313
> --- /dev/null
> +++ b/arch/arm/lib/bdinfo.c
> @@ -0,0 +1,51 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * ARM-specific information for the 'bd' command
> + *
> + * (C) Copyright 2003
> + * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> + */
> +
> +#include <common.h>
> +#include <init.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +void arch_print_bdinfo(void)
> +{
> +#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
> +	if (gd->arch.secure_ram & MEM_RESERVE_SECURE_SECURED) {
> +		bdinfo_print_num("Secure ram",
> +				 gd->arch.secure_ram &
> +				 MEM_RESERVE_SECURE_ADDR_MASK);
> +	}
> +#endif
> +#ifdef CONFIG_RESV_RAM
> +	if (gd->arch.resv_ram)
> +		bdinfo_print_num("Reserved ram", gd->arch.resv_ram);
> +#endif
> +#if !(CONFIG_IS_ENABLED(SYS_ICACHE_OFF) && CONFIG_IS_ENABLED(SYS_DCACHE_OFF))
> +	bdinfo_print_num("TLB addr", gd->arch.tlb_addr);
> +#endif
> +	bdinfo_print_num("irq_sp", gd->irq_sp);	/* irq stack pointer */
> +	bdinfo_print_num("sp start ", gd->start_addr_sp);
> +	/*
> +	 * TODO: Currently only support for davinci SOC's is added.
> +	 * Remove this check once all the board implement this.
> +	 */
> +#ifdef CONFIG_CLOCKS
> +	printf("ARM frequency = %ld MHz\n", gd->bd->bi_arm_freq);
> +	printf("DSP frequency = %ld MHz\n", gd->bd->bi_dsp_freq);
> +	printf("DDR frequency = %ld MHz\n", gd->bd->bi_ddr_freq);
> +#endif
> +#ifdef CONFIG_BOARD_TYPES
> +	printf("Board Type  = %ld\n", gd->board_type);
> +#endif



> +#if CONFIG_VAL(SYS_MALLOC_F_LEN)
> +	printf("Early malloc usage: %lx / %x\n", gd->malloc_ptr,
> +	       CONFIG_VAL(SYS_MALLOC_F_LEN));
> +#endif
> +#if CONFIG_IS_ENABLED(MULTI_DTB_FIT)
> +	bdinfo_print_num("multi_dtb_fit", (ulong)gd->multi_dtb_fit);
> +#endif
> +}

that part is not really ARM specific. Maybe it's useful in the generic
function?
diff mbox series

Patch

diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index b839aa7a50..27b12e7f2b 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -43,6 +43,7 @@  obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMSET) += memset.o
 obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMCPY) += memcpy.o
 obj-$(CONFIG_SEMIHOSTING) += semihosting.o
 
+obj-y	+= bdinfo.o
 obj-y	+= sections.o
 obj-y	+= stack.o
 ifdef CONFIG_CPU_V7M
diff --git a/arch/arm/lib/bdinfo.c b/arch/arm/lib/bdinfo.c
new file mode 100644
index 0000000000..ce8edd0313
--- /dev/null
+++ b/arch/arm/lib/bdinfo.c
@@ -0,0 +1,51 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * ARM-specific information for the 'bd' command
+ *
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+ */
+
+#include <common.h>
+#include <init.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void arch_print_bdinfo(void)
+{
+#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+	if (gd->arch.secure_ram & MEM_RESERVE_SECURE_SECURED) {
+		bdinfo_print_num("Secure ram",
+				 gd->arch.secure_ram &
+				 MEM_RESERVE_SECURE_ADDR_MASK);
+	}
+#endif
+#ifdef CONFIG_RESV_RAM
+	if (gd->arch.resv_ram)
+		bdinfo_print_num("Reserved ram", gd->arch.resv_ram);
+#endif
+#if !(CONFIG_IS_ENABLED(SYS_ICACHE_OFF) && CONFIG_IS_ENABLED(SYS_DCACHE_OFF))
+	bdinfo_print_num("TLB addr", gd->arch.tlb_addr);
+#endif
+	bdinfo_print_num("irq_sp", gd->irq_sp);	/* irq stack pointer */
+	bdinfo_print_num("sp start ", gd->start_addr_sp);
+	/*
+	 * TODO: Currently only support for davinci SOC's is added.
+	 * Remove this check once all the board implement this.
+	 */
+#ifdef CONFIG_CLOCKS
+	printf("ARM frequency = %ld MHz\n", gd->bd->bi_arm_freq);
+	printf("DSP frequency = %ld MHz\n", gd->bd->bi_dsp_freq);
+	printf("DDR frequency = %ld MHz\n", gd->bd->bi_ddr_freq);
+#endif
+#ifdef CONFIG_BOARD_TYPES
+	printf("Board Type  = %ld\n", gd->board_type);
+#endif
+#if CONFIG_VAL(SYS_MALLOC_F_LEN)
+	printf("Early malloc usage: %lx / %x\n", gd->malloc_ptr,
+	       CONFIG_VAL(SYS_MALLOC_F_LEN));
+#endif
+#if CONFIG_IS_ENABLED(MULTI_DTB_FIT)
+	bdinfo_print_num("multi_dtb_fit", (ulong)gd->multi_dtb_fit);
+#endif
+}
diff --git a/cmd/bdinfo.c b/cmd/bdinfo.c
index c6096a5fd3..55a9244aef 100644
--- a/cmd/bdinfo.c
+++ b/cmd/bdinfo.c
@@ -65,6 +65,10 @@  void __weak board_detail(void)
 	/* Please define board_detail() for your PPC platform */
 }
 
+__weak void arch_print_bdinfo(void)
+{
+}
+
 int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
 {
 	bd_t *bd = gd->bd;
@@ -97,43 +101,7 @@  int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
 	bdinfo_print_num("FB base  ", gd->fb_base);
 #endif
 
-	/* This section is used only by ARM */
-#ifdef CONFIG_ARM
-#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
-	if (gd->arch.secure_ram & MEM_RESERVE_SECURE_SECURED) {
-		bdinfo_print_num("Secure ram",
-			  gd->arch.secure_ram & MEM_RESERVE_SECURE_ADDR_MASK);
-	}
-#endif
-#ifdef CONFIG_RESV_RAM
-	if (gd->arch.resv_ram)
-		bdinfo_print_num("Reserved ram", gd->arch.resv_ram);
-#endif
-#if !(CONFIG_IS_ENABLED(SYS_ICACHE_OFF) && CONFIG_IS_ENABLED(SYS_DCACHE_OFF))
-	bdinfo_print_num("TLB addr", gd->arch.tlb_addr);
-#endif
-	bdinfo_print_num("irq_sp", gd->irq_sp);	/* irq stack pointer */
-	bdinfo_print_num("sp start ", gd->start_addr_sp);
-	/*
-	 * TODO: Currently only support for davinci SOC's is added.
-	 * Remove this check once all the board implement this.
-	 */
-#ifdef CONFIG_CLOCKS
-	printf("ARM frequency = %ld MHz\n", gd->bd->bi_arm_freq);
-	printf("DSP frequency = %ld MHz\n", gd->bd->bi_dsp_freq);
-	printf("DDR frequency = %ld MHz\n", gd->bd->bi_ddr_freq);
-#endif
-#ifdef CONFIG_BOARD_TYPES
-	printf("Board Type  = %ld\n", gd->board_type);
-#endif
-#if CONFIG_VAL(SYS_MALLOC_F_LEN)
-	printf("Early malloc usage: %lx / %x\n", gd->malloc_ptr,
-	       CONFIG_VAL(SYS_MALLOC_F_LEN));
-#endif
-#if CONFIG_IS_ENABLED(MULTI_DTB_FIT)
-	bdinfo_print_num("multi_dtb_fit", (ulong)gd->multi_dtb_fit);
-#endif
-#endif /* CONFIG_ARM */
+	arch_print_bdinfo();
 
 	/* This section is used only by ppc */
 #if defined(CONFIG_MPC8xx) || defined(CONFIG_E500)
@@ -168,7 +136,7 @@  int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
 	/* The rest are used only by m68k */
 #ifdef CONFIG_M68K
 #if defined(CONFIG_SYS_MBAR)
-	print_num("mbar", bd->bi_mbar_base);
+	bdinfo_print_num("mbar", bd->bi_mbar_base);
 #endif
 	bdinfo_print_mhz("cpufreq", bd->bi_intfreq);
 	if (IS_ENABLED(CONFIG_PCI))
diff --git a/include/init.h b/include/init.h
index af4deed566..e727031514 100644
--- a/include/init.h
+++ b/include/init.h
@@ -267,6 +267,9 @@  void bdinfo_print_num(const char *name, ulong value);
 /* Print a clock speed in MHz */
 void bdinfo_print_mhz(const char *name, unsigned long hz);
 
+/* Show arch-specific information for the 'bd' command */
+void arch_print_bdinfo(void);
+
 #endif	/* __ASSEMBLY__ */
 /* Put only stuff here that the assembler can digest */