From patchwork Mon May  4 14:09:01 2020
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
X-Patchwork-Submitter: Peng Fan <peng.fan@nxp.com>
X-Patchwork-Id: 245035
List-Id: U-Boot discussion <u-boot.lists.denx.de>
From: peng.fan at nxp.com (Peng Fan)
Date: Mon,  4 May 2020 22:09:01 +0800
Subject: [PATCH 12/14] MXS_NAND: Add clock support for iMX8
In-Reply-To: <20200504140903.23602-1-peng.fan@nxp.com>
References: <20200504140903.23602-1-peng.fan@nxp.com>
Message-ID: <20200504140903.23602-13-peng.fan@nxp.com>

From: Ye Li <ye.li at nxp.com>

Since iMX8 has enabled clock uclass, we can parse the clocks from DTB
and enable them in GPMI driver.

Signed-off-by: Ye Li <ye.li at nxp.com>
Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 drivers/mtd/nand/raw/mxs_nand_dt.c | 69 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 69 insertions(+)

diff --git a/drivers/mtd/nand/raw/mxs_nand_dt.c b/drivers/mtd/nand/raw/mxs_nand_dt.c
index c4dc0bb1dd..43dbe9e66e 100644
--- a/drivers/mtd/nand/raw/mxs_nand_dt.c
+++ b/drivers/mtd/nand/raw/mxs_nand_dt.c
@@ -2,6 +2,8 @@
  * NXP GPMI NAND flash driver (DT initialization)
  *
  * Copyright (C) 2018 Toradex
+ * Copyright 2019 NXP
+ *
  * Authors:
  * Stefan Agner <stefan.agner at toradex.com>
  *
@@ -14,6 +16,7 @@
 #include <linux/io.h>
 #include <linux/ioport.h>
 #include <linux/printk.h>
+#include <clk.h>
 
 #include <mxs_nand.h>
 
@@ -91,6 +94,72 @@ static int mxs_nand_dt_probe(struct udevice *dev)
 
 	info->legacy_bch_geometry = dev_read_bool(dev, "fsl,legacy-bch-geometry");
 
+	if (IS_ENABLED(CONFIG_CLK) && IS_ENABLED(CONFIG_IMX8)) {
+		/* Assigned clock already set clock */
+		struct clk gpmi_clk;
+
+		ret = clk_get_by_name(dev, "gpmi_io", &gpmi_clk);
+		if (ret < 0) {
+			debug("Can't get gpmi io clk: %d\n", ret);
+			return ret;
+		}
+
+		ret = clk_enable(&gpmi_clk);
+		if (ret < 0) {
+			debug("Can't enable gpmi io clk: %d\n", ret);
+			return ret;
+		}
+
+		ret = clk_get_by_name(dev, "gpmi_apb", &gpmi_clk);
+		if (ret < 0) {
+			debug("Can't get gpmi_apb clk: %d\n", ret);
+			return ret;
+		}
+
+		ret = clk_enable(&gpmi_clk);
+		if (ret < 0) {
+			debug("Can't enable gpmi_apb clk: %d\n", ret);
+			return ret;
+		}
+
+		ret = clk_get_by_name(dev, "gpmi_bch", &gpmi_clk);
+		if (ret < 0) {
+			debug("Can't get gpmi_bch clk: %d\n", ret);
+			return ret;
+		}
+
+		ret = clk_enable(&gpmi_clk);
+		if (ret < 0) {
+			debug("Can't enable gpmi_bch clk: %d\n", ret);
+			return ret;
+		}
+
+		ret = clk_get_by_name(dev, "gpmi_apb_bch", &gpmi_clk);
+		if (ret < 0) {
+			debug("Can't get gpmi_apb_bch clk: %d\n", ret);
+			return ret;
+		}
+
+		ret = clk_enable(&gpmi_clk);
+		if (ret < 0) {
+			debug("Can't enable gpmi_apb_bch clk: %d\n", ret);
+			return ret;
+		}
+
+		/* this clock is used for apbh_dma, since the apbh dma does not support DM,
+		  * we optionally enable it here
+		  */
+		ret = clk_get_by_name(dev, "gpmi_apbh_dma", &gpmi_clk);
+		if (ret < 0) {
+			debug("Can't get gpmi_apbh_dma clk: %d\n", ret);
+		} else {
+			ret = clk_enable(&gpmi_clk);
+			if (ret < 0) {
+				debug("Can't enable gpmi_apbh_dma clk: %d\n", ret);
+			}
+		}
+	}
+
 	return mxs_nand_init_ctrl(info);
 }