From patchwork Sun May 3 14:31:46 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Peng Fan X-Patchwork-Id: 244920 List-Id: U-Boot discussion From: peng.fan at nxp.com (Peng Fan) Date: Sun, 3 May 2020 22:31:46 +0800 Subject: [PATCH 1/2] misc: fuse: Update imx8 fuse driver for 8QM Message-ID: <20200503143147.16144-1-peng.fan@nxp.com> From: Ye Li Add the second ECC fuse area for 8QM which is different with 8QXP Signed-off-by: Ye Li Signed-off-by: Peng Fan --- drivers/misc/imx8/fuse.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/misc/imx8/fuse.c b/drivers/misc/imx8/fuse.c index 1309215d4d..4d7f2f524d 100644 --- a/drivers/misc/imx8/fuse.c +++ b/drivers/misc/imx8/fuse.c @@ -15,8 +15,13 @@ DECLARE_GLOBAL_DATA_PTR; #define FSL_ECC_WORD_START_1 0x10 #define FSL_ECC_WORD_END_1 0x10F +#ifdef CONFIG_IMX8QM +#define FSL_ECC_WORD_START_2 0x1A0 +#define FSL_ECC_WORD_END_2 0x1FF +#elif defined(CONFIG_IMX8QXP) #define FSL_ECC_WORD_START_2 0x220 #define FSL_ECC_WORD_END_2 0x31F +#endif #define FSL_QXP_FUSE_GAP_START 0x110 #define FSL_QXP_FUSE_GAP_END 0x21F