diff mbox series

[v7,13/22] riscv: cpu: fu540: Add support for cpu fu540

Message ID 20200502100628.24809-14-pragnesh.patel@sifive.com
State Superseded
Headers show
Series RISC-V SiFive FU540 support SPL | expand

Commit Message

Pragnesh Patel May 2, 2020, 10:06 a.m. UTC
Add SiFive fu540 cpu to support RISC-V arch

Signed-off-by: Pragnesh Patel <pragnesh.patel at sifive.com>
---
 arch/riscv/Kconfig            |  1 +
 arch/riscv/cpu/fu540/Kconfig  | 15 ++++++++++++++
 arch/riscv/cpu/fu540/Makefile |  7 +++++++
 arch/riscv/cpu/fu540/cpu.c    | 22 ++++++++++++++++++++
 arch/riscv/cpu/fu540/dram.c   | 38 +++++++++++++++++++++++++++++++++++
 5 files changed, 83 insertions(+)
 create mode 100644 arch/riscv/cpu/fu540/Kconfig
 create mode 100644 arch/riscv/cpu/fu540/Makefile
 create mode 100644 arch/riscv/cpu/fu540/cpu.c
 create mode 100644 arch/riscv/cpu/fu540/dram.c

Comments

Bin Meng May 2, 2020, 12:32 p.m. UTC | #1
Hi Pragnesh,

On Sat, May 2, 2020 at 6:08 PM Pragnesh Patel <pragnesh.patel at sifive.com> wrote:
>
> Add SiFive fu540 cpu to support RISC-V arch
>
> Signed-off-by: Pragnesh Patel <pragnesh.patel at sifive.com>
> ---
>  arch/riscv/Kconfig            |  1 +
>  arch/riscv/cpu/fu540/Kconfig  | 15 ++++++++++++++
>  arch/riscv/cpu/fu540/Makefile |  7 +++++++
>  arch/riscv/cpu/fu540/cpu.c    | 22 ++++++++++++++++++++
>  arch/riscv/cpu/fu540/dram.c   | 38 +++++++++++++++++++++++++++++++++++
>  5 files changed, 83 insertions(+)
>  create mode 100644 arch/riscv/cpu/fu540/Kconfig
>  create mode 100644 arch/riscv/cpu/fu540/Makefile
>  create mode 100644 arch/riscv/cpu/fu540/cpu.c
>  create mode 100644 arch/riscv/cpu/fu540/dram.c
>
> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> index fb5fe5afff..3044609971 100644
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -57,6 +57,7 @@ source "board/sifive/fu540/Kconfig"
>  # platform-specific options below
>  source "arch/riscv/cpu/ax25/Kconfig"
>  source "arch/riscv/cpu/generic/Kconfig"
> +source "arch/riscv/cpu/fu540/Kconfig"
>
>  # architecture-specific options below
>
> diff --git a/arch/riscv/cpu/fu540/Kconfig b/arch/riscv/cpu/fu540/Kconfig
> new file mode 100644
> index 0000000000..b2cb155d6d
> --- /dev/null
> +++ b/arch/riscv/cpu/fu540/Kconfig
> @@ -0,0 +1,15 @@
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +# Copyright (C) 2018, Bin Meng <bmeng.cn at gmail.com>
> +
> +config GENERIC_RISCV

This should be SIFIVE_FU540

> +       bool
> +       select ARCH_EARLY_INIT_R
> +       imply CPU
> +       imply CPU_RISCV
> +       imply RISCV_TIMER
> +       imply SIFIVE_CLINT if (RISCV_MMODE || SPL_RISCV_MMODE)
> +       imply CMD_CPU
> +       imply SPL_CPU_SUPPORT
> +       imply SPL_OPENSBI
> +       imply SPL_LOAD_FIT
> diff --git a/arch/riscv/cpu/fu540/Makefile b/arch/riscv/cpu/fu540/Makefile
> new file mode 100644
> index 0000000000..44700d998c
> --- /dev/null
> +++ b/arch/riscv/cpu/fu540/Makefile
> @@ -0,0 +1,7 @@
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +# Copyright (C) 2020 SiFive, Inc
> +# Pragnesh Patel <pragnesh.patel at sifive.com>
> +
> +obj-y += dram.o
> +obj-y += cpu.o
> diff --git a/arch/riscv/cpu/fu540/cpu.c b/arch/riscv/cpu/fu540/cpu.c
> new file mode 100644
> index 0000000000..13a69ef0cc
> --- /dev/null
> +++ b/arch/riscv/cpu/fu540/cpu.c
> @@ -0,0 +1,22 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2018, Bin Meng <bmeng.cn at gmail.com>
> + */
> +
> +#include <common.h>
> +#include <irq_func.h>
> +
> +/*
> + * cleanup_before_linux() is called just before we call linux
> + * it prepares the processor for linux
> + *
> + * we disable interrupt and caches.
> + */
> +int cleanup_before_linux(void)
> +{
> +       disable_interrupts();
> +
> +       cache_flush();
> +
> +       return 0;
> +}
> diff --git a/arch/riscv/cpu/fu540/dram.c b/arch/riscv/cpu/fu540/dram.c
> new file mode 100644
> index 0000000000..1dc77efeca
> --- /dev/null
> +++ b/arch/riscv/cpu/fu540/dram.c
> @@ -0,0 +1,38 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2018, Bin Meng <bmeng.cn at gmail.com>
> + */
> +
> +#include <common.h>
> +#include <fdtdec.h>
> +#include <init.h>
> +#include <linux/sizes.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +int dram_init(void)
> +{
> +       return fdtdec_setup_mem_size_base();
> +}
> +
> +int dram_init_banksize(void)
> +{
> +       return fdtdec_setup_memory_banksize();
> +}
> +
> +ulong board_get_usable_ram_top(ulong total_size)
> +{
> +#ifdef CONFIG_64BIT
> +       /*
> +        * Ensure that we run from first 4GB so that all
> +        * addresses used by U-Boot are 32bit addresses.
> +        *
> +        * This in-turn ensures that 32bit DMA capable
> +        * devices work fine because DMA mapping APIs will
> +        * provide 32bit DMA addresses only.
> +        */
> +       if (gd->ram_top > SZ_4G)
> +               return SZ_4G;
> +#endif
> +       return gd->ram_top;
> +}

Other than that,
Reviewed-by: Bin Meng <bmeng.cn at gmail.com>

Regards,
Bin
Pragnesh Patel May 2, 2020, 2:38 p.m. UTC | #2
Hi Bin,

>-----Original Message-----
>From: Bin Meng <bmeng.cn at gmail.com>
>Sent: 02 May 2020 18:03
>To: Pragnesh Patel <pragnesh.patel at sifive.com>
>Cc: U-Boot Mailing List <u-boot at lists.denx.de>; Atish Patra
><atish.patra at wdc.com>; Palmer Dabbelt <palmerdabbelt at google.com>; Paul
>Walmsley <paul.walmsley at sifive.com>; Jagan Teki
><jagan at amarulasolutions.com>; Troy Benjegerdes
><troy.benjegerdes at sifive.com>; Anup Patel <anup.patel at wdc.com>; Sagar
>Kadam <sagar.kadam at sifive.com>; Rick Chen <rick at andestech.com>; Lukas
>Auer <lukas.auer at aisec.fraunhofer.de>; Simon Glass <sjg at chromium.org>
>Subject: Re: [PATCH v7 13/22] riscv: cpu: fu540: Add support for cpu fu540
>
>[External Email] Do not click links or attachments unless you recognize the
>sender and know the content is safe
>
>Hi Pragnesh,
>
>On Sat, May 2, 2020 at 6:08 PM Pragnesh Patel <pragnesh.patel at sifive.com>
>wrote:
>>
>> Add SiFive fu540 cpu to support RISC-V arch
>>
>> Signed-off-by: Pragnesh Patel <pragnesh.patel at sifive.com>
>> ---
>>  arch/riscv/Kconfig            |  1 +
>>  arch/riscv/cpu/fu540/Kconfig  | 15 ++++++++++++++
>> arch/riscv/cpu/fu540/Makefile |  7 +++++++
>>  arch/riscv/cpu/fu540/cpu.c    | 22 ++++++++++++++++++++
>>  arch/riscv/cpu/fu540/dram.c   | 38
>+++++++++++++++++++++++++++++++++++
>>  5 files changed, 83 insertions(+)
>>  create mode 100644 arch/riscv/cpu/fu540/Kconfig  create mode 100644
>> arch/riscv/cpu/fu540/Makefile  create mode 100644
>> arch/riscv/cpu/fu540/cpu.c  create mode 100644
>> arch/riscv/cpu/fu540/dram.c
>>
>> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index
>> fb5fe5afff..3044609971 100644
>> --- a/arch/riscv/Kconfig
>> +++ b/arch/riscv/Kconfig
>> @@ -57,6 +57,7 @@ source "board/sifive/fu540/Kconfig"
>>  # platform-specific options below
>>  source "arch/riscv/cpu/ax25/Kconfig"
>>  source "arch/riscv/cpu/generic/Kconfig"
>> +source "arch/riscv/cpu/fu540/Kconfig"
>>
>>  # architecture-specific options below
>>
>> diff --git a/arch/riscv/cpu/fu540/Kconfig
>> b/arch/riscv/cpu/fu540/Kconfig new file mode 100644 index
>> 0000000000..b2cb155d6d
>> --- /dev/null
>> +++ b/arch/riscv/cpu/fu540/Kconfig
>> @@ -0,0 +1,15 @@
>> +# SPDX-License-Identifier: GPL-2.0+
>> +#
>> +# Copyright (C) 2018, Bin Meng <bmeng.cn at gmail.com>
>> +
>> +config GENERIC_RISCV
>
>This should be SIFIVE_FU540

Will update in v8, thanks for the review.

>
>> +       bool
>> +       select ARCH_EARLY_INIT_R
>> +       imply CPU
>> +       imply CPU_RISCV
>> +       imply RISCV_TIMER
>> +       imply SIFIVE_CLINT if (RISCV_MMODE || SPL_RISCV_MMODE)
>> +       imply CMD_CPU
>> +       imply SPL_CPU_SUPPORT
>> +       imply SPL_OPENSBI
>> +       imply SPL_LOAD_FIT
>> diff --git a/arch/riscv/cpu/fu540/Makefile
>> b/arch/riscv/cpu/fu540/Makefile new file mode 100644 index
>> 0000000000..44700d998c
>> --- /dev/null
>> +++ b/arch/riscv/cpu/fu540/Makefile
>> @@ -0,0 +1,7 @@
>> +# SPDX-License-Identifier: GPL-2.0+
>> +#
>> +# Copyright (C) 2020 SiFive, Inc
>> +# Pragnesh Patel <pragnesh.patel at sifive.com>
>> +
>> +obj-y += dram.o
>> +obj-y += cpu.o
>> diff --git a/arch/riscv/cpu/fu540/cpu.c b/arch/riscv/cpu/fu540/cpu.c
>> new file mode 100644 index 0000000000..13a69ef0cc
>> --- /dev/null
>> +++ b/arch/riscv/cpu/fu540/cpu.c
>> @@ -0,0 +1,22 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * Copyright (C) 2018, Bin Meng <bmeng.cn at gmail.com>  */
>> +
>> +#include <common.h>
>> +#include <irq_func.h>
>> +
>> +/*
>> + * cleanup_before_linux() is called just before we call linux
>> + * it prepares the processor for linux
>> + *
>> + * we disable interrupt and caches.
>> + */
>> +int cleanup_before_linux(void)
>> +{
>> +       disable_interrupts();
>> +
>> +       cache_flush();
>> +
>> +       return 0;
>> +}
>> diff --git a/arch/riscv/cpu/fu540/dram.c b/arch/riscv/cpu/fu540/dram.c
>> new file mode 100644 index 0000000000..1dc77efeca
>> --- /dev/null
>> +++ b/arch/riscv/cpu/fu540/dram.c
>> @@ -0,0 +1,38 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * Copyright (C) 2018, Bin Meng <bmeng.cn at gmail.com>  */
>> +
>> +#include <common.h>
>> +#include <fdtdec.h>
>> +#include <init.h>
>> +#include <linux/sizes.h>
>> +
>> +DECLARE_GLOBAL_DATA_PTR;
>> +
>> +int dram_init(void)
>> +{
>> +       return fdtdec_setup_mem_size_base(); }
>> +
>> +int dram_init_banksize(void)
>> +{
>> +       return fdtdec_setup_memory_banksize(); }
>> +
>> +ulong board_get_usable_ram_top(ulong total_size) { #ifdef
>> +CONFIG_64BIT
>> +       /*
>> +        * Ensure that we run from first 4GB so that all
>> +        * addresses used by U-Boot are 32bit addresses.
>> +        *
>> +        * This in-turn ensures that 32bit DMA capable
>> +        * devices work fine because DMA mapping APIs will
>> +        * provide 32bit DMA addresses only.
>> +        */
>> +       if (gd->ram_top > SZ_4G)
>> +               return SZ_4G;
>> +#endif
>> +       return gd->ram_top;
>> +}
>
>Other than that,
>Reviewed-by: Bin Meng <bmeng.cn at gmail.com>
>
>Regards,
>Bin
Jagan Teki May 2, 2020, 4:34 p.m. UTC | #3
On Sat, May 2, 2020 at 3:38 PM Pragnesh Patel <pragnesh.patel at sifive.com> wrote:
>
> Add SiFive fu540 cpu to support RISC-V arch

This looks like a new patch in this series, isn't it?

>
> Signed-off-by: Pragnesh Patel <pragnesh.patel at sifive.com>
> ---

Good practice is to add "changes for 7" so-that it is easy for reviews
to find what is new in this series.

>  arch/riscv/Kconfig            |  1 +
>  arch/riscv/cpu/fu540/Kconfig  | 15 ++++++++++++++
>  arch/riscv/cpu/fu540/Makefile |  7 +++++++
>  arch/riscv/cpu/fu540/cpu.c    | 22 ++++++++++++++++++++
>  arch/riscv/cpu/fu540/dram.c   | 38 +++++++++++++++++++++++++++++++++++
>  5 files changed, 83 insertions(+)
>  create mode 100644 arch/riscv/cpu/fu540/Kconfig
>  create mode 100644 arch/riscv/cpu/fu540/Makefile
>  create mode 100644 arch/riscv/cpu/fu540/cpu.c
>  create mode 100644 arch/riscv/cpu/fu540/dram.c
>
> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> index fb5fe5afff..3044609971 100644
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -57,6 +57,7 @@ source "board/sifive/fu540/Kconfig"
>  # platform-specific options below
>  source "arch/riscv/cpu/ax25/Kconfig"
>  source "arch/riscv/cpu/generic/Kconfig"
> +source "arch/riscv/cpu/fu540/Kconfig"
>
>  # architecture-specific options below
>
> diff --git a/arch/riscv/cpu/fu540/Kconfig b/arch/riscv/cpu/fu540/Kconfig
> new file mode 100644
> index 0000000000..b2cb155d6d
> --- /dev/null
> +++ b/arch/riscv/cpu/fu540/Kconfig
> @@ -0,0 +1,15 @@
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +# Copyright (C) 2018, Bin Meng <bmeng.cn at gmail.com>
> +
> +config GENERIC_RISCV
> +       bool
> +       select ARCH_EARLY_INIT_R
> +       imply CPU
> +       imply CPU_RISCV
> +       imply RISCV_TIMER
> +       imply SIFIVE_CLINT if (RISCV_MMODE || SPL_RISCV_MMODE)
> +       imply CMD_CPU
> +       imply SPL_CPU_SUPPORT
> +       imply SPL_OPENSBI
> +       imply SPL_LOAD_FIT
> diff --git a/arch/riscv/cpu/fu540/Makefile b/arch/riscv/cpu/fu540/Makefile
> new file mode 100644
> index 0000000000..44700d998c
> --- /dev/null
> +++ b/arch/riscv/cpu/fu540/Makefile
> @@ -0,0 +1,7 @@
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +# Copyright (C) 2020 SiFive, Inc
> +# Pragnesh Patel <pragnesh.patel at sifive.com>
> +
> +obj-y += dram.o
> +obj-y += cpu.o
> diff --git a/arch/riscv/cpu/fu540/cpu.c b/arch/riscv/cpu/fu540/cpu.c
> new file mode 100644
> index 0000000000..13a69ef0cc
> --- /dev/null
> +++ b/arch/riscv/cpu/fu540/cpu.c
> @@ -0,0 +1,22 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2018, Bin Meng <bmeng.cn at gmail.com>
> + */
> +
> +#include <common.h>
> +#include <irq_func.h>
> +
> +/*
> + * cleanup_before_linux() is called just before we call linux
> + * it prepares the processor for linux
> + *
> + * we disable interrupt and caches.
> + */
> +int cleanup_before_linux(void)
> +{
> +       disable_interrupts();
> +
> +       cache_flush();
> +
> +       return 0;
> +}
> diff --git a/arch/riscv/cpu/fu540/dram.c b/arch/riscv/cpu/fu540/dram.c
> new file mode 100644
> index 0000000000..1dc77efeca
> --- /dev/null
> +++ b/arch/riscv/cpu/fu540/dram.c
> @@ -0,0 +1,38 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2018, Bin Meng <bmeng.cn at gmail.com>
> + */
> +
> +#include <common.h>
> +#include <fdtdec.h>
> +#include <init.h>
> +#include <linux/sizes.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +int dram_init(void)
> +{
> +       return fdtdec_setup_mem_size_base();
> +}
> +
> +int dram_init_banksize(void)
> +{
> +       return fdtdec_setup_memory_banksize();
> +}
> +
> +ulong board_get_usable_ram_top(ulong total_size)
> +{
> +#ifdef CONFIG_64BIT
> +       /*
> +        * Ensure that we run from first 4GB so that all
> +        * addresses used by U-Boot are 32bit addresses.
> +        *
> +        * This in-turn ensures that 32bit DMA capable
> +        * devices work fine because DMA mapping APIs will
> +        * provide 32bit DMA addresses only.
> +        */
> +       if (gd->ram_top > SZ_4G)
> +               return SZ_4G;
> +#endif
> +       return gd->ram_top;

Is all this code common across SPL and U-Boot proper? except that SPL
config imply.

Jagan.
Pragnesh Patel May 3, 2020, 9:16 a.m. UTC | #4
Hi Jagan,

>-----Original Message-----
>From: Jagan Teki <jagan at amarulasolutions.com>
>Sent: 02 May 2020 22:05
>To: Pragnesh Patel <pragnesh.patel at sifive.com>
>Cc: U-Boot-Denx <u-boot at lists.denx.de>; Atish Patra
><atish.patra at wdc.com>; Palmer Dabbelt <palmerdabbelt at google.com>; Bin
>Meng <bmeng.cn at gmail.com>; Paul Walmsley <paul.walmsley at sifive.com>;
>Troy Benjegerdes <troy.benjegerdes at sifive.com>; Anup Patel
><anup.patel at wdc.com>; Sagar Kadam <sagar.kadam at sifive.com>; Rick Chen
><rick at andestech.com>; Lukas Auer <lukas.auer at aisec.fraunhofer.de>; Simon
>Glass <sjg at chromium.org>
>Subject: Re: [PATCH v7 13/22] riscv: cpu: fu540: Add support for cpu fu540
>
>[External Email] Do not click links or attachments unless you recognize the
>sender and know the content is safe
>
>On Sat, May 2, 2020 at 3:38 PM Pragnesh Patel <pragnesh.patel at sifive.com>
>wrote:
>>
>> Add SiFive fu540 cpu to support RISC-V arch
>
>This looks like a new patch in this series, isn't it?

Yes.

>
>>
>> Signed-off-by: Pragnesh Patel <pragnesh.patel at sifive.com>
>> ---
>
>Good practice is to add "changes for 7" so-that it is easy for reviews to find
>what is new in this series.

Will take care in future. For this series, I am just updating cover letter.

>
>>  arch/riscv/Kconfig            |  1 +
>>  arch/riscv/cpu/fu540/Kconfig  | 15 ++++++++++++++
>> arch/riscv/cpu/fu540/Makefile |  7 +++++++
>>  arch/riscv/cpu/fu540/cpu.c    | 22 ++++++++++++++++++++
>>  arch/riscv/cpu/fu540/dram.c   | 38
>+++++++++++++++++++++++++++++++++++
>>  5 files changed, 83 insertions(+)
>>  create mode 100644 arch/riscv/cpu/fu540/Kconfig  create mode 100644
>> arch/riscv/cpu/fu540/Makefile  create mode 100644
>> arch/riscv/cpu/fu540/cpu.c  create mode 100644
>> arch/riscv/cpu/fu540/dram.c
>>
>> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index
>> fb5fe5afff..3044609971 100644
>> --- a/arch/riscv/Kconfig
>> +++ b/arch/riscv/Kconfig
>> @@ -57,6 +57,7 @@ source "board/sifive/fu540/Kconfig"
>>  # platform-specific options below
>>  source "arch/riscv/cpu/ax25/Kconfig"
>>  source "arch/riscv/cpu/generic/Kconfig"
>> +source "arch/riscv/cpu/fu540/Kconfig"
>>
>>  # architecture-specific options below
>>
>> diff --git a/arch/riscv/cpu/fu540/Kconfig
>> b/arch/riscv/cpu/fu540/Kconfig new file mode 100644 index
>> 0000000000..b2cb155d6d
>> --- /dev/null
>> +++ b/arch/riscv/cpu/fu540/Kconfig
>> @@ -0,0 +1,15 @@
>> +# SPDX-License-Identifier: GPL-2.0+
>> +#
>> +# Copyright (C) 2018, Bin Meng <bmeng.cn at gmail.com>
>> +
>> +config GENERIC_RISCV
>> +       bool
>> +       select ARCH_EARLY_INIT_R
>> +       imply CPU
>> +       imply CPU_RISCV
>> +       imply RISCV_TIMER
>> +       imply SIFIVE_CLINT if (RISCV_MMODE || SPL_RISCV_MMODE)
>> +       imply CMD_CPU
>> +       imply SPL_CPU_SUPPORT
>> +       imply SPL_OPENSBI
>> +       imply SPL_LOAD_FIT
>> diff --git a/arch/riscv/cpu/fu540/Makefile
>> b/arch/riscv/cpu/fu540/Makefile new file mode 100644 index
>> 0000000000..44700d998c
>> --- /dev/null
>> +++ b/arch/riscv/cpu/fu540/Makefile
>> @@ -0,0 +1,7 @@
>> +# SPDX-License-Identifier: GPL-2.0+
>> +#
>> +# Copyright (C) 2020 SiFive, Inc
>> +# Pragnesh Patel <pragnesh.patel at sifive.com>
>> +
>> +obj-y += dram.o
>> +obj-y += cpu.o
>> diff --git a/arch/riscv/cpu/fu540/cpu.c b/arch/riscv/cpu/fu540/cpu.c
>> new file mode 100644 index 0000000000..13a69ef0cc
>> --- /dev/null
>> +++ b/arch/riscv/cpu/fu540/cpu.c
>> @@ -0,0 +1,22 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * Copyright (C) 2018, Bin Meng <bmeng.cn at gmail.com>  */
>> +
>> +#include <common.h>
>> +#include <irq_func.h>
>> +
>> +/*
>> + * cleanup_before_linux() is called just before we call linux
>> + * it prepares the processor for linux
>> + *
>> + * we disable interrupt and caches.
>> + */
>> +int cleanup_before_linux(void)
>> +{
>> +       disable_interrupts();
>> +
>> +       cache_flush();
>> +
>> +       return 0;
>> +}
>> diff --git a/arch/riscv/cpu/fu540/dram.c b/arch/riscv/cpu/fu540/dram.c
>> new file mode 100644 index 0000000000..1dc77efeca
>> --- /dev/null
>> +++ b/arch/riscv/cpu/fu540/dram.c
>> @@ -0,0 +1,38 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * Copyright (C) 2018, Bin Meng <bmeng.cn at gmail.com>  */
>> +
>> +#include <common.h>
>> +#include <fdtdec.h>
>> +#include <init.h>
>> +#include <linux/sizes.h>
>> +
>> +DECLARE_GLOBAL_DATA_PTR;
>> +
>> +int dram_init(void)
>> +{
>> +       return fdtdec_setup_mem_size_base(); }
>> +
>> +int dram_init_banksize(void)
>> +{
>> +       return fdtdec_setup_memory_banksize(); }
>> +
>> +ulong board_get_usable_ram_top(ulong total_size) { #ifdef
>> +CONFIG_64BIT
>> +       /*
>> +        * Ensure that we run from first 4GB so that all
>> +        * addresses used by U-Boot are 32bit addresses.
>> +        *
>> +        * This in-turn ensures that 32bit DMA capable
>> +        * devices work fine because DMA mapping APIs will
>> +        * provide 32bit DMA addresses only.
>> +        */
>> +       if (gd->ram_top > SZ_4G)
>> +               return SZ_4G;
>> +#endif
>> +       return gd->ram_top;
>
>Is all this code common across SPL and U-Boot proper? except that SPL config
>imply.

For SPL, only spl.c file is necessary. All other files are compiled only for U-Boot proper.
You can check this in "arch/riscv/cpu/fu540/Makefile".

>
>Jagan.
diff mbox series

Patch

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index fb5fe5afff..3044609971 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -57,6 +57,7 @@  source "board/sifive/fu540/Kconfig"
 # platform-specific options below
 source "arch/riscv/cpu/ax25/Kconfig"
 source "arch/riscv/cpu/generic/Kconfig"
+source "arch/riscv/cpu/fu540/Kconfig"
 
 # architecture-specific options below
 
diff --git a/arch/riscv/cpu/fu540/Kconfig b/arch/riscv/cpu/fu540/Kconfig
new file mode 100644
index 0000000000..b2cb155d6d
--- /dev/null
+++ b/arch/riscv/cpu/fu540/Kconfig
@@ -0,0 +1,15 @@ 
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2018, Bin Meng <bmeng.cn at gmail.com>
+
+config GENERIC_RISCV
+	bool
+	select ARCH_EARLY_INIT_R
+	imply CPU
+	imply CPU_RISCV
+	imply RISCV_TIMER
+	imply SIFIVE_CLINT if (RISCV_MMODE || SPL_RISCV_MMODE)
+	imply CMD_CPU
+	imply SPL_CPU_SUPPORT
+	imply SPL_OPENSBI
+	imply SPL_LOAD_FIT
diff --git a/arch/riscv/cpu/fu540/Makefile b/arch/riscv/cpu/fu540/Makefile
new file mode 100644
index 0000000000..44700d998c
--- /dev/null
+++ b/arch/riscv/cpu/fu540/Makefile
@@ -0,0 +1,7 @@ 
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2020 SiFive, Inc
+# Pragnesh Patel <pragnesh.patel at sifive.com>
+
+obj-y += dram.o
+obj-y += cpu.o
diff --git a/arch/riscv/cpu/fu540/cpu.c b/arch/riscv/cpu/fu540/cpu.c
new file mode 100644
index 0000000000..13a69ef0cc
--- /dev/null
+++ b/arch/riscv/cpu/fu540/cpu.c
@@ -0,0 +1,22 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018, Bin Meng <bmeng.cn at gmail.com>
+ */
+
+#include <common.h>
+#include <irq_func.h>
+
+/*
+ * cleanup_before_linux() is called just before we call linux
+ * it prepares the processor for linux
+ *
+ * we disable interrupt and caches.
+ */
+int cleanup_before_linux(void)
+{
+	disable_interrupts();
+
+	cache_flush();
+
+	return 0;
+}
diff --git a/arch/riscv/cpu/fu540/dram.c b/arch/riscv/cpu/fu540/dram.c
new file mode 100644
index 0000000000..1dc77efeca
--- /dev/null
+++ b/arch/riscv/cpu/fu540/dram.c
@@ -0,0 +1,38 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018, Bin Meng <bmeng.cn at gmail.com>
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <init.h>
+#include <linux/sizes.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+	return fdtdec_setup_mem_size_base();
+}
+
+int dram_init_banksize(void)
+{
+	return fdtdec_setup_memory_banksize();
+}
+
+ulong board_get_usable_ram_top(ulong total_size)
+{
+#ifdef CONFIG_64BIT
+	/*
+	 * Ensure that we run from first 4GB so that all
+	 * addresses used by U-Boot are 32bit addresses.
+	 *
+	 * This in-turn ensures that 32bit DMA capable
+	 * devices work fine because DMA mapping APIs will
+	 * provide 32bit DMA addresses only.
+	 */
+	if (gd->ram_top > SZ_4G)
+		return SZ_4G;
+#endif
+	return gd->ram_top;
+}