From patchwork Mon Apr 27 10:52:02 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Rayagonda Kokatanur X-Patchwork-Id: 238646 List-Id: U-Boot discussion From: rayagonda.kokatanur at broadcom.com (Rayagonda Kokatanur) Date: Mon, 27 Apr 2020 16:22:02 +0530 Subject: [PATCH v1 44/49] cmd: bcm: add broadcom error log setup command In-Reply-To: <20200427105207.5659-1-rayagonda.kokatanur@broadcom.com> References: <20200427105207.5659-1-rayagonda.kokatanur@broadcom.com> Message-ID: <20200427105207.5659-45-rayagonda.kokatanur@broadcom.com> From: Vladimir Olovyannikov Add broadcom error log setup command. Some Broadcom platforms have ability to record event logs by SCP. - Add a logsetup command which is used to perform initial configuration of this log. Move this command to bcm/ directory to be used for Broadcom-specific U-boot commands. - Add support for Broadcom-specific commands to Kconfig and to Makefile in cmd/. Signed-off-by: Vladimir Olovyannikov Signed-off-by: Rayagonda Kokatanur --- board/broadcom/bcmns3/Kconfig | 1 + cmd/Kconfig | 2 + cmd/Makefile | 2 + cmd/bcm/Kconfig | 12 + cmd/bcm/Makefile | 4 + cmd/bcm/elog.h | 64 +++++ cmd/bcm/logsetup.c | 432 ++++++++++++++++++++++++++++++++++ 7 files changed, 517 insertions(+) create mode 100644 cmd/bcm/Kconfig create mode 100644 cmd/bcm/Makefile create mode 100644 cmd/bcm/elog.h create mode 100644 cmd/bcm/logsetup.c diff --git a/board/broadcom/bcmns3/Kconfig b/board/broadcom/bcmns3/Kconfig index 10547f71de..6a8c7bc7db 100644 --- a/board/broadcom/bcmns3/Kconfig +++ b/board/broadcom/bcmns3/Kconfig @@ -15,6 +15,7 @@ config SYS_CONFIG_NAME config CMD_BCM_EXT_UTILS bool "Enable Broadcom-specific u-boot commands" default y + select CMD_BCM_LOGSETUP config CHIMP_OPTEE bool "Enable secure ChiMP firmware loading" diff --git a/cmd/Kconfig b/cmd/Kconfig index 6ce9e5521c..385e6eb5a5 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -2200,4 +2200,6 @@ config CMD_UBIFS help UBIFS is a file system for flash devices which works on top of UBI. +source cmd/bcm/Kconfig + endmenu diff --git a/cmd/Makefile b/cmd/Makefile index 6692ed96c6..c0837de859 100644 --- a/cmd/Makefile +++ b/cmd/Makefile @@ -190,6 +190,8 @@ obj-$(CONFIG_$(SPL_)CMD_TLV_EEPROM) += tlv_eeprom.o # core command obj-y += nvedit.o +obj-$(CONFIG_CMD_BCM_EXT_UTILS) += bcm/ + obj-$(CONFIG_TI_COMMON_CMD_OPTIONS) += ti/ filechk_data_gz = (echo "static const char data_gz[] ="; cat $< | scripts/bin2c; echo ";") diff --git a/cmd/bcm/Kconfig b/cmd/bcm/Kconfig new file mode 100644 index 0000000000..189a45004e --- /dev/null +++ b/cmd/bcm/Kconfig @@ -0,0 +1,12 @@ +menu "Broadcom Extended Utilities" + +config CMD_BCM_LOGSETUP + bool "Command to setup logging on Broadcom boards" + depends on TARGET_BCMNS3 + default n + help + Support specific log setup on Broadcom SoCs. This command + allows checking if logging support is present, and update + log sections. + +endmenu diff --git a/cmd/bcm/Makefile b/cmd/bcm/Makefile new file mode 100644 index 0000000000..96dc8f7ad7 --- /dev/null +++ b/cmd/bcm/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright 2020 Broadcom + +obj-$(CONFIG_CMD_BCM_LOGSETUP) += logsetup.o diff --git a/cmd/bcm/elog.h b/cmd/bcm/elog.h new file mode 100644 index 0000000000..cc36d8739a --- /dev/null +++ b/cmd/bcm/elog.h @@ -0,0 +1,64 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2020 Broadcom + */ + +#ifndef __ELOG_H__ +#define __ELOG_H__ + +#define GLOBAL_META_HDR_SIG 0x45524c47 +#define MAX_REC_COUNT 13 +#define MAX_REC_FORMAT 1 +#define MAX_SRC_TYPE 3 +#define MAX_NVM_TYPE 3 +/* A special type. Use defaults specified in CRMU config */ +#define NVM_DEFAULT 0xff + +/* Max. number of cmd parameters per elog spec */ +#define PARAM_COUNT 3 + +#define REC_DESC_LENGTH 8 + +enum { + LOG_SETUP_CMD_VALIDATE_META, + LOG_SETUP_CMD_WRITE_META, + LOG_SETUP_CMD_ERASE, + LOG_SETUP_CMD_READ, + LOG_SETUP_CMD_CHECK +}; + +#pragma pack(push, 1) + +struct meta_record { + u8 record_type; + u8 record_format; + u8 src_mem_type; + u8 alt_src_mem_type; + u8 nvm_type; + char rec_desc[REC_DESC_LENGTH]; + u64 src_mem_addr; + u64 alt_src_mem_addr; + u64 rec_addr; + u32 rec_size; + u32 sector_size; + u8 padding[3]; +}; + +struct global_header { + u32 signature; + u32 sector_size; + u8 revision; + u8 rec_count; + u16 padding; +}; + +struct log_setup { + u32 cmd; + u32 params[PARAM_COUNT]; + u32 result; + u32 ret_code; +}; + +#pragma pack(pop) + +#endif diff --git a/cmd/bcm/logsetup.c b/cmd/bcm/logsetup.c new file mode 100644 index 0000000000..271462311d --- /dev/null +++ b/cmd/bcm/logsetup.c @@ -0,0 +1,432 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2020 Broadcom + */ + +/* + * Create a binary file ready to be flashed + * as a global meta for logging, from a source file. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "elog.h" + +#define FILE_LINE_BUF_SIZE 1024 +#define GLOBAL_PARAM_COUNT 3 +#define REC_PARAM_COUNT 11 + +#define GLOBAL_NAME "GLOBAL" +#define RECORD_NAME "RECORD" + +#define MCU_IPC_MCU_CMD_ELOG_SETUP 0x84 +/* SPI write operations can be slow */ +#define DEFAULT_TIMEOUT_MS 10000 + +#define MCU_IPC_CMD_DONE_MASK 0x80000000 +#define MCU_IPC_CMD_REPLY_MASK 0x3fff0000 +#define MCU_IPC_CMD_REPLY_SHIFT 16 + +#define MIN_ARGS_COUNT 3 +#define MAX_ARGS_COUNT 5 +#define SEP_STR "," +#define SUPPORTED_CMD "-s" +#define CHK_HDR_CMD "-c" + +enum { + PARAM_GLOBAL, + PARAM_REC +}; + +static uintptr_t crmu_mbox0_address; + +/* + * Send a logging command to MCU patch for execution. + * + * Parameters: + * cmd: an IPC command code + * param: a pointer to parameters structure for IPC + * is_real_cmd: whether command produces a response in the structure. + * Only "support" command does not. + */ +static int send_crmu_log_cmd(u32 cmd, u32 param, int is_real_cmd) +{ + u32 timeout; + u32 val; + int ret = CMD_RET_FAILURE; + struct log_setup *setup; + + setup = (struct log_setup *)(uintptr_t)param; + timeout = DEFAULT_TIMEOUT_MS; + + writel(cmd, crmu_mbox0_address); + writel(param, crmu_mbox0_address + sizeof(u32)); + + do { + mdelay(1); + val = readl(is_real_cmd ? (uintptr_t)&setup->ret_code : + crmu_mbox0_address); + if (val & MCU_IPC_CMD_DONE_MASK) { + ret = CMD_RET_SUCCESS; + break; + } + + } while (timeout--); + + if (ret == CMD_RET_FAILURE) { + pr_err("CRMU cmd timeout!\n"); + return ret; + } + + /* Obtain status */ + val = (val & MCU_IPC_CMD_REPLY_MASK) >> MCU_IPC_CMD_REPLY_SHIFT; + if (val) + ret = CMD_RET_FAILURE; + + return ret; +} + +static char *get_next_param(char **str, char *delimiter) +{ + char *ret = strsep(str, delimiter); + + if (!ret) + return NULL; + + return strim(ret); +} + +static int count_chars(char *str, char delimiter) +{ + int count = 0; + + if (!str || (!strlen(str))) + return 0; + + do { + if (*str == delimiter) + count++; + + str++; + } while (*str); + + /* Need to consider leftovers (if any) after the last delimiter */ + count++; + + return count; +} + +static int do_setup(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + struct global_header global; + struct log_setup setup = {0}; + u8 *temp; + u8 *ptr = NULL; + char *buf; + u32 line_no = 0; + u32 expected_meta_size; + u32 data_size; + u32 log_offset = 0; + u32 num_recs = 0; + u32 addr; + int global_ready = 0; + int ret = CMD_RET_FAILURE; + int force = 0; + + if (argc < MIN_ARGS_COUNT || argc > MAX_ARGS_COUNT) + return CMD_RET_USAGE; + + /* Usage: addr or (-s/-c) mbox0_addr [data_size] [force] */ + crmu_mbox0_address = simple_strtoul(argv[2], NULL, 16); + if (!crmu_mbox0_address) { + pr_err("Invalid CRMU mbox0 address\n"); + return ret; + } + + if (argc == MIN_ARGS_COUNT) { + if (strncmp(argv[1], SUPPORTED_CMD, 2) == 0) + return send_crmu_log_cmd(MCU_IPC_MCU_CMD_ELOG_SETUP, + LOG_SETUP_CMD_CHECK, + 0 + ); + + if (strncmp(argv[1], CHK_HDR_CMD, 2) == 0) + return send_crmu_log_cmd(MCU_IPC_MCU_CMD_ELOG_SETUP, + (uintptr_t)&setup, + 1 + ); + } + + /* Expect 1st parameter as a pointer to metadata */ + addr = simple_strtoul(argv[1], NULL, 16); + if (!addr) { + pr_err("Address 0x0 is not allowed\n"); + return ret; + } + + data_size = simple_strtoul(argv[3], NULL, 16); + if (!data_size) { + pr_err("Invalid source size\n"); + return ret; + } + + if (argc == MAX_ARGS_COUNT) + force = simple_strtoul(argv[MAX_ARGS_COUNT - 1], NULL, 10); + + memset(&global, 0, sizeof(struct global_header)); + expected_meta_size = sizeof(struct global_header) + + MAX_REC_COUNT * sizeof(struct meta_record); + + temp = (u8 *)malloc(expected_meta_size); + if (!temp) + return ret; + + memset(temp, 0, expected_meta_size); + + ptr = temp; + buf = (char *)(uintptr_t)addr; + /* End of file mark */ + buf[data_size] = '\0'; + + do { + char *type_name; + u32 entry_type; + char *line; + char *value; + + line_no++; + line = get_next_param(&buf, "\n"); + if (!line) + break; + + if ((!strlen(line)) || line[0] == '#') + continue; + + value = get_next_param(&line, "="); + + if (!value || (!strlen(value))) { + pr_err("Invalid format of line %d\n", line_no); + goto free_params; + } + + type_name = GLOBAL_NAME; + + if (!strncasecmp(value, type_name, strlen(GLOBAL_NAME))) { + entry_type = PARAM_GLOBAL; + } else { + type_name = RECORD_NAME; + if (!strncasecmp(value, + type_name, + strlen(RECORD_NAME) + ) + ) { + entry_type = PARAM_REC; + } else { + pr_err("Unknown type %s, line %d\n", + value, + line_no + ); + goto free_params; + } + } + + if (global_ready && entry_type == PARAM_GLOBAL) { + /* Multiple globals are not allowed */ + pr_err("Multiple GLOBAL records, line %d\n", line_no); + goto free_params; + } + + if (entry_type == PARAM_GLOBAL) { + /* Parse Global and create global record in outfile */ + if (count_chars(line, ',') != GLOBAL_PARAM_COUNT) { + pr_err("Invalid GLOBAL format, line %d\n", + line_no + ); + goto free_params; + } + + global.sector_size = + simple_strtoul + (get_next_param(&line, SEP_STR), + NULL, + 0 + ); + global.revision = + (u8)simple_strtoul + (get_next_param(&line, SEP_STR), + NULL, + 0 + ); + log_offset = simple_strtoul + (get_next_param(&line, SEP_STR), + NULL, + 0 + ); + + if (!global.sector_size) { + pr_err("Invalid GLOBAL, line %d\n", line_no); + goto free_params; + } + + global.signature = GLOBAL_META_HDR_SIG; + global_ready = 1; + + /* Shift to the first RECORD header */ + log_offset += 2 * global.sector_size; + ptr += sizeof(struct global_header); + } else { + struct meta_record rec = {0}; + char *desc; + char *rec_addr_str; + int auto_addr = 0; + + if (count_chars(line, ',') != REC_PARAM_COUNT) { + pr_err("Invalid RECORD, line %d\n", line_no); + goto free_params; + } + + rec.record_type = (u8)simple_strtoul + (get_next_param(&line, SEP_STR), + NULL, + 0 + ); + rec.record_format = (u8)simple_strtoul + (get_next_param(&line, SEP_STR), + NULL, + 0 + ); + rec.src_mem_type = (u8)simple_strtoul + (get_next_param(&line, SEP_STR), + NULL, + 0 + ); + rec.alt_src_mem_type = (u8)simple_strtoul + (get_next_param(&line, SEP_STR), + NULL, + 0 + ); + rec.nvm_type = (u8)simple_strtoul + (get_next_param(&line, SEP_STR), + NULL, + 0 + ); + desc = get_next_param(&line, SEP_STR); + if (desc) + desc = strim(desc); + + rec.src_mem_addr = (u64)simple_strtoul + (get_next_param(&line, SEP_STR), + NULL, + 0 + ); + rec.alt_src_mem_addr = (u64)simple_strtoul + (get_next_param(&line, SEP_STR), + NULL, + 0 + ); + rec_addr_str = get_next_param(&line, SEP_STR); + if (rec_addr_str) + rec_addr_str = strim(rec_addr_str); + + if (!strcmp(rec_addr_str, "auto")) + auto_addr = 1; + else + rec.rec_addr = (u64)simple_strtoul + (rec_addr_str, + NULL, + 0 + ); + + rec.rec_size = simple_strtoul + (get_next_param(&line, SEP_STR), + NULL, + 0 + ); + rec.sector_size = simple_strtoul + (get_next_param(&line, SEP_STR), + NULL, + 0 + ); + if (auto_addr) { + rec.rec_addr = (u64)log_offset; + log_offset += rec.rec_size; + } + + /* Sanity checks */ + if (rec.record_type > MAX_REC_COUNT || + rec.record_format > MAX_REC_FORMAT || + (rec.nvm_type > MAX_NVM_TYPE && + rec.nvm_type != NVM_DEFAULT) || + !rec.rec_size || + !rec.sector_size || + (!desc || !strlen(desc) || + (strlen(desc) > sizeof(rec.rec_desc) + 1) + ) + ) { + pr_err("Invalid RECORD %s, line %d\n", + desc ? desc : " (no desc)", line_no + ); + goto free_params; + } + + memset(rec.rec_desc, ' ', sizeof(rec.rec_desc)); + memcpy(rec.rec_desc, desc, strlen(desc)); + memcpy(ptr, &rec, sizeof(struct meta_record)); + ptr += sizeof(struct meta_record); + num_recs++; + } + + } while (buf && ((uintptr_t)buf < (addr + data_size))); + + if (!num_recs) { + pr_err("No RECORD entry!\n"); + goto free_params; + } + + if (!global_ready) { + pr_err("Global entry was not found!\n"); + goto free_params; + } + + if (num_recs > MAX_REC_COUNT) { + pr_err("Too many records (max %d)\n", MAX_REC_COUNT); + goto free_params; + } + + /* Recalculate new expected size */ + if (num_recs != MAX_REC_COUNT) { + expected_meta_size = sizeof(struct global_header) + + num_recs * sizeof(struct meta_record); + } + + global.rec_count = num_recs; + memcpy(temp, &global, sizeof(struct global_header)); + + setup.params[0] = (uintptr_t)temp; + setup.params[1] = expected_meta_size; + + /* Apply the command via CRMU mailboxes and read the result. */ + setup.cmd = (force) ? LOG_SETUP_CMD_WRITE_META : + LOG_SETUP_CMD_VALIDATE_META; + + /* Finally, request the MCU patch to perform the command */ + ret = send_crmu_log_cmd(MCU_IPC_MCU_CMD_ELOG_SETUP, + (uintptr_t)(&setup), + 1 + ); + +free_params: + free(temp); + + return ret; +} + +U_BOOT_CMD(logsetup, 5, 1, do_setup, "setup Broadcom MCU logging subsystem", + "\taddr mbox0_addr [data_size] [force]\nor\n\t -s(or -c) mbox0_addr" + );