| Message ID | 20200425110354.12381-5-jagan@amarulasolutions.com |
|---|---|
| State | New |
| Headers | show |
| Series | rockchip: Add PCIe host support | expand |
On 2020/4/25 ??7:03, Jagan Teki wrote: > Add PCIE_PHY clock disablement support on rk3399 > clock driver. > > This would trigger if the PCIe PHY driver failed to > initialize or power on the PHY. > > Signed-off-by: Jagan Teki <jagan at amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang at rock-chips.com> Thanks, - Kever > --- > drivers/clk/rockchip/clk_rk3399.c | 17 +++++++++++++++++ > 1 file changed, 17 insertions(+) > > diff --git a/drivers/clk/rockchip/clk_rk3399.c b/drivers/clk/rockchip/clk_rk3399.c > index 8e069fbade..2d447f96f7 100644 > --- a/drivers/clk/rockchip/clk_rk3399.c > +++ b/drivers/clk/rockchip/clk_rk3399.c > @@ -1085,6 +1085,22 @@ static int rk3399_clk_enable(struct clk *clk) > return 0; > } > > +static int rk3399_clk_disable(struct clk *clk) > +{ > + struct rk3399_clk_priv *priv = dev_get_priv(clk->dev); > + > + switch (clk->id) { > + case SCLK_PCIEPHY_REF: > + rk_clrreg(&priv->cru->clksel_con[18], BIT(7)); > + break; > + default: > + debug("%s: unsupported clk %ld\n", __func__, clk->id); > + return -ENOENT; > + } > + > + return 0; > +} > + > static struct clk_ops rk3399_clk_ops = { > .get_rate = rk3399_clk_get_rate, > .set_rate = rk3399_clk_set_rate, > @@ -1092,6 +1108,7 @@ static struct clk_ops rk3399_clk_ops = { > .set_parent = rk3399_clk_set_parent, > #endif > .enable = rk3399_clk_enable, > + .disable = rk3399_clk_disable, > }; > > #ifdef CONFIG_SPL_BUILD
diff --git a/drivers/clk/rockchip/clk_rk3399.c b/drivers/clk/rockchip/clk_rk3399.c index 8e069fbade..2d447f96f7 100644 --- a/drivers/clk/rockchip/clk_rk3399.c +++ b/drivers/clk/rockchip/clk_rk3399.c @@ -1085,6 +1085,22 @@ static int rk3399_clk_enable(struct clk *clk) return 0; } +static int rk3399_clk_disable(struct clk *clk) +{ + struct rk3399_clk_priv *priv = dev_get_priv(clk->dev); + + switch (clk->id) { + case SCLK_PCIEPHY_REF: + rk_clrreg(&priv->cru->clksel_con[18], BIT(7)); + break; + default: + debug("%s: unsupported clk %ld\n", __func__, clk->id); + return -ENOENT; + } + + return 0; +} + static struct clk_ops rk3399_clk_ops = { .get_rate = rk3399_clk_get_rate, .set_rate = rk3399_clk_set_rate, @@ -1092,6 +1108,7 @@ static struct clk_ops rk3399_clk_ops = { .set_parent = rk3399_clk_set_parent, #endif .enable = rk3399_clk_enable, + .disable = rk3399_clk_disable, }; #ifdef CONFIG_SPL_BUILD
Add PCIE_PHY clock disablement support on rk3399 clock driver. This would trigger if the PCIe PHY driver failed to initialize or power on the PHY. Signed-off-by: Jagan Teki <jagan at amarulasolutions.com> --- drivers/clk/rockchip/clk_rk3399.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)