From patchwork Fri Apr 24 16:50:11 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Sylwester Nawrocki/Kernel \\\(PLT\\\) /SRPOL/Staff Engineer/Samsung Electronics" X-Patchwork-Id: 238422 List-Id: U-Boot discussion From: s.nawrocki at samsung.com (Sylwester Nawrocki) Date: Fri, 24 Apr 2020 18:50:11 +0200 Subject: [PATCH v1 09/10] pci: Add driver for Broadcom STB PCIe controller In-Reply-To: <20200424165012.31915-1-s.nawrocki@samsung.com> References: <20200424165012.31915-1-s.nawrocki@samsung.com> Message-ID: <20200424165012.31915-10-s.nawrocki@samsung.com> This patch adds basic driver for the Broadcom STB PCIe host controller. The code is based on Linux upstream driver (pcie-brcmstb.c) with MSI handling removed. The inbound access memory region is not currently parsed from dma-ranges DT property and a fixed 4GB region is used. The patch has been tested on RPI4 board, i.e. on BCM2711 SoC with VL805 USB Host Controller. Signed-off-by: Nicolas Saenz Julienne Signed-off-by: Sylwester Nawrocki --- Changes since RFC: - reworked to align with current Linux mainline version and u-boot driver by Nicolas Saenz Julienne --- drivers/pci/Kconfig | 6 + drivers/pci/Makefile | 1 + drivers/pci/pcie_brcmstb.c | 593 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 600 insertions(+) create mode 100644 drivers/pci/pcie_brcmstb.c diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index 437cd9a..056a021 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -197,4 +197,10 @@ config PCIE_MEDIATEK Say Y here if you want to enable Gen2 PCIe controller, which could be found on MT7623 SoC family. +config PCI_BRCMSTB + bool "Broadcom STB PCIe controller" + depends on DM_PCI + depends on ARCH_BCM283X + help + Say Y here if you want to enable Broadcom STB PCIe controller support. endif diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index c051ecc..3e53b1f 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -43,3 +43,4 @@ obj-$(CONFIG_PCI_PHYTIUM) += pcie_phytium.o obj-$(CONFIG_PCIE_INTEL_FPGA) += pcie_intel_fpga.o obj-$(CONFIG_PCI_KEYSTONE) += pcie_dw_ti.o obj-$(CONFIG_PCIE_MEDIATEK) += pcie_mediatek.o +obj-$(CONFIG_PCI_BRCMSTB) += pcie_brcmstb.o diff --git a/drivers/pci/pcie_brcmstb.c b/drivers/pci/pcie_brcmstb.c new file mode 100644 index 0000000..dfe9833 --- /dev/null +++ b/drivers/pci/pcie_brcmstb.c @@ -0,0 +1,593 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Broadcom STB PCIe controller driver + * + * Copyright (C) 2020 Samsung Electronics Co., Ltd. + * + * Based on upstream Linux kernel driver: + * drivers/pci/controller/pcie-brcmstb.c + * Copyright (C) 2009 - 2017 Broadcom + * + * Based driver by Nicolas Saenz Julienne + * Copyright (C) 2020 Nicolas Saenz Julienne + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +/* BRCM_PCIE_CAP_REGS - Offset for the mandatory capability config regs */ +#define BRCM_PCIE_CAP_REGS 0x00ac + +/* Broadcom STB PCIe Register Offsets */ +#define PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1 0x0188 +#define PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1_ENDIAN_MODE_BAR2_MASK 0xc +#define PCIE_RC_CFG_VENDOR_SPCIFIC_REG1_LITTLE_ENDIAN 0x0 + +#define PCIE_RC_CFG_PRIV1_ID_VAL3 0x043c +#define PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK 0xffffff + +#define PCIE_RC_DL_MDIO_ADDR 0x1100 +#define PCIE_RC_DL_MDIO_WR_DATA 0x1104 +#define PCIE_RC_DL_MDIO_RD_DATA 0x1108 + +#define PCIE_MISC_MISC_CTRL 0x4008 +#define PCIE_MISC_MISC_CTRL_SCB_ACCESS_EN_MASK 0x1000 +#define PCIE_MISC_MISC_CTRL_CFG_READ_UR_MODE_MASK 0x2000 +#define PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_MASK 0x300000 +#define PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_128 0x0 +#define PCIE_MISC_MISC_CTRL_SCB0_SIZE_MASK 0xf8000000 + +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO 0x400c +#define PCIE_MEM_WIN0_LO(win) \ + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO + ((win) * 4) + +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI 0x4010 +#define PCIE_MEM_WIN0_HI(win) \ + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI + ((win) * 4) + +#define PCIE_MISC_RC_BAR1_CONFIG_LO 0x402c +#define PCIE_MISC_RC_BAR1_CONFIG_LO_SIZE_MASK 0x1f + +#define PCIE_MISC_RC_BAR2_CONFIG_LO 0x4034 +#define PCIE_MISC_RC_BAR2_CONFIG_LO_SIZE_MASK 0x1f +#define PCIE_MISC_RC_BAR2_CONFIG_HI 0x4038 + +#define PCIE_MISC_RC_BAR3_CONFIG_LO 0x403c +#define PCIE_MISC_RC_BAR3_CONFIG_LO_SIZE_MASK 0x1f + +#define PCIE_MISC_PCIE_STATUS 0x4068 +#define PCIE_MISC_PCIE_STATUS_PCIE_PORT_MASK 0x80 +#define PCIE_MISC_PCIE_STATUS_PCIE_DL_ACTIVE_MASK 0x20 +#define PCIE_MISC_PCIE_STATUS_PCIE_PHYLINKUP_MASK 0x10 +#define PCIE_MISC_PCIE_STATUS_PCIE_LINK_IN_L23_MASK 0x40 + +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT 0x4070 +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_LIMIT_MASK 0xfff00000 +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_MASK 0xfff0 +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_HI_SHIFT 12 +#define PCIE_MEM_WIN0_BASE_LIMIT(win) \ + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT + ((win) * 4) + +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI 0x4080 +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI_BASE_MASK 0xff +#define PCIE_MEM_WIN0_BASE_HI(win) \ + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI + ((win) * 8) + +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI 0x4084 +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI_LIMIT_MASK 0xff +#define PCIE_MEM_WIN0_LIMIT_HI(win) \ + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI + ((win) * 8) + +#define PCIE_MISC_HARD_PCIE_HARD_DEBUG 0x4204 +#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK 0x2 +#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK 0x08000000 + +#define PCIE_MSI_INTR2_CLR 0x4508 +#define PCIE_MSI_INTR2_MASK_SET 0x4510 + +#define PCIE_EXT_CFG_DATA 0x8000 + +#define PCIE_EXT_CFG_INDEX 0x9000 +#define PCIE_EXT_BUSNUM_SHIFT 20 +#define PCIE_EXT_SLOT_SHIFT 15 +#define PCIE_EXT_FUNC_SHIFT 12 + +#define PCIE_RGR1_SW_INIT_1 0x9210 +#define PCIE_RGR1_SW_INIT_1_PERST_MASK 0x1 +#define PCIE_RGR1_SW_INIT_1_INIT_MASK 0x2 + +/* PCIe parameters */ +#define BRCM_NUM_PCIE_OUT_WINS 0x4 + +/* MDIO registers */ +#define MDIO_PORT0 0x0 +#define MDIO_DATA_MASK 0x7fffffff +#define MDIO_PORT_MASK 0xf0000 +#define MDIO_REGAD_MASK 0xffff +#define MDIO_CMD_MASK 0xfff00000 +#define MDIO_CMD_READ 0x1 +#define MDIO_CMD_WRITE 0x0 +#define MDIO_DATA_DONE_MASK 0x80000000 +#define MDIO_RD_DONE(x) (((x) & MDIO_DATA_DONE_MASK) ? 1 : 0) +#define MDIO_WT_DONE(x) (((x) & MDIO_DATA_DONE_MASK) ? 0 : 1) +#define SSC_REGS_ADDR 0x1100 +#define SET_ADDR_OFFSET 0x1f +#define SSC_CNTL_OFFSET 0x2 +#define SSC_CNTL_OVRD_EN_MASK 0x8000 +#define SSC_CNTL_OVRD_VAL_MASK 0x4000 +#define SSC_STATUS_OFFSET 0x1 +#define SSC_STATUS_SSC_MASK 0x400 +#define SSC_STATUS_PLL_LOCK_MASK 0x800 + +struct brcm_pcie { + void __iomem *base; + + int gen; + bool ssc; +}; + +#define msleep(a) udelay((a) * 1000) + +/* + * This is to convert the size of the inbound "BAR" region to the + * non-linear values of PCIE_X_MISC_RC_BAR[123]_CONFIG_LO.SIZE + */ +static int brcm_pcie_encode_ibar_size(u64 size) +{ + int log2_in = ilog2(size); + + if (log2_in >= 12 && log2_in <= 15) + /* Covers 4KB to 32KB (inclusive) */ + return (log2_in - 12) + 0x1c; + else if (log2_in >= 16 && log2_in <= 37) + /* Covers 64KB to 32GB, (inclusive) */ + return log2_in - 15; + /* Something is awry so disable */ + return 0; +} + +/* Configuration space read/write support */ +static inline int brcm_pcie_cfg_index(pci_dev_t bdf, int reg) +{ + return (PCI_DEV(bdf) << PCIE_EXT_SLOT_SHIFT) + | (PCI_FUNC(bdf) << PCIE_EXT_FUNC_SHIFT) + | (PCI_BUS(bdf) << PCIE_EXT_BUSNUM_SHIFT) + | (reg & ~3); +} + +/* The controller is capable of serving in both RC and EP roles */ +static bool brcm_pcie_rc_mode(struct brcm_pcie *pcie) +{ + u32 val = readl(pcie->base + PCIE_MISC_PCIE_STATUS); + + return !!FIELD_GET(PCIE_MISC_PCIE_STATUS_PCIE_PORT_MASK, val); +} + +static bool brcm_pcie_link_up(struct brcm_pcie *pcie) +{ + u32 val = readl(pcie->base + PCIE_MISC_PCIE_STATUS); + u32 dla = FIELD_GET(PCIE_MISC_PCIE_STATUS_PCIE_DL_ACTIVE_MASK, val); + u32 plu = FIELD_GET(PCIE_MISC_PCIE_STATUS_PCIE_PHYLINKUP_MASK, val); + + return dla && plu; +} + +static int brcm_pcie_config_address(const struct udevice *udev, pci_dev_t bdf, + uint offset, void **paddress) +{ + struct brcm_pcie *pcie = dev_get_priv(udev); + unsigned int bus = PCI_BUS(bdf); + unsigned int dev = PCI_DEV(bdf); + int idx; + + /* + * Busses 0 (host PCIe bridge) and 1 (its immediate child) + * are limited to a single device each + */ + if ((bus == (udev->seq + 1)) && dev > 0) + return -ENODEV; + + /* Accesses to the RC go right to the RC registers if PCI device == 0 */ + if (bus == udev->seq) { + if (PCI_DEV(bdf)) + return -ENODEV; + + *paddress = pcie->base + offset; + return 0; + } + + /* For devices, write to the config space index register */ + idx = brcm_pcie_cfg_index(bdf, 0); + + writel(idx, pcie->base + PCIE_EXT_CFG_INDEX); + *paddress = pcie->base + PCIE_EXT_CFG_DATA + offset; + + return 0; +} + +static int brcm_pcie_read_config(const struct udevice *bus, pci_dev_t bdf, + uint offset, ulong *valuep, + enum pci_size_t size) +{ + return pci_generic_mmap_read_config(bus, brcm_pcie_config_address, + bdf, offset, valuep, size); +} + +static int brcm_pcie_write_config(struct udevice *bus, pci_dev_t bdf, + uint offset, ulong value, + enum pci_size_t size) +{ + return pci_generic_mmap_write_config(bus, brcm_pcie_config_address, + bdf, offset, value, size); +} + +static const char *link_speed_to_str(unsigned int s) +{ + static const char * const speed_str[] = { "??", "2.5", "5.0", "8.0" }; + + if (s >= ARRAY_SIZE(speed_str)) + s = 0; + + return speed_str[s]; +} + +static inline void brcm_pcie_bridge_sw_init_set(struct brcm_pcie *pcie, u32 val) +{ + u32 tmp; + + tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1); + u32p_replace_bits(&tmp, val, PCIE_RGR1_SW_INIT_1_INIT_MASK); + writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1); +} + +static inline void brcm_pcie_perst_set(struct brcm_pcie *pcie, u32 val) +{ + u32 tmp; + + tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1); + u32p_replace_bits(&tmp, val, PCIE_RGR1_SW_INIT_1_PERST_MASK); + writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1); +} + +static u32 brcm_pcie_mdio_form_pkt(int port, int regad, int cmd) +{ + u32 pkt = 0; + + pkt |= FIELD_PREP(MDIO_PORT_MASK, port); + pkt |= FIELD_PREP(MDIO_REGAD_MASK, regad); + pkt |= FIELD_PREP(MDIO_CMD_MASK, cmd); + + return pkt; +} + +/* Negative return value indicates error */ +static int brcm_pcie_mdio_read(void __iomem *base, u8 port, u8 regad, u32 *val) +{ + int tries; + u32 data; + + writel(brcm_pcie_mdio_form_pkt(port, regad, MDIO_CMD_READ), + base + PCIE_RC_DL_MDIO_ADDR); + readl(base + PCIE_RC_DL_MDIO_ADDR); + + data = readl(base + PCIE_RC_DL_MDIO_RD_DATA); + for (tries = 0; !MDIO_RD_DONE(data) && tries < 10; tries++) { + udelay(10); + data = readl(base + PCIE_RC_DL_MDIO_RD_DATA); + } + + *val = FIELD_GET(MDIO_DATA_MASK, data); + return MDIO_RD_DONE(data) ? 0 : -EIO; +} + +/* Negative return value indicates error */ +static int brcm_pcie_mdio_write(void __iomem *base, u8 port, + u8 regad, u16 wrdata) +{ + int tries; + u32 data; + + writel(brcm_pcie_mdio_form_pkt(port, regad, MDIO_CMD_WRITE), + base + PCIE_RC_DL_MDIO_ADDR); + readl(base + PCIE_RC_DL_MDIO_ADDR); + writel(MDIO_DATA_DONE_MASK | wrdata, base + PCIE_RC_DL_MDIO_WR_DATA); + + data = readl(base + PCIE_RC_DL_MDIO_WR_DATA); + for (tries = 0; !MDIO_WT_DONE(data) && tries < 10; tries++) { + udelay(10); + data = readl(base + PCIE_RC_DL_MDIO_WR_DATA); + } + + return MDIO_WT_DONE(data) ? 0 : -EIO; +} + +/* + * Configures device for Spread Spectrum Clocking (SSC) mode; negative + * return value indicates error. + */ +static int brcm_pcie_set_ssc(struct brcm_pcie *pcie) +{ + void __iomem *base = pcie->base; + int pll, ssc; + int ret; + u32 tmp; + + ret = brcm_pcie_mdio_write(base, MDIO_PORT0, SET_ADDR_OFFSET, + SSC_REGS_ADDR); + if (ret < 0) + return ret; + + ret = brcm_pcie_mdio_read(base, MDIO_PORT0, SSC_CNTL_OFFSET, &tmp); + if (ret < 0) + return ret; + + u32p_replace_bits(&tmp, 1, SSC_CNTL_OVRD_EN_MASK); + u32p_replace_bits(&tmp, 1, SSC_CNTL_OVRD_VAL_MASK); + ret = brcm_pcie_mdio_write(base, MDIO_PORT0, SSC_CNTL_OFFSET, tmp); + if (ret < 0) + return ret; + + udelay(1000); + ret = brcm_pcie_mdio_read(base, MDIO_PORT0, SSC_STATUS_OFFSET, &tmp); + if (ret < 0) + return ret; + + ssc = FIELD_GET(SSC_STATUS_SSC_MASK, tmp); + pll = FIELD_GET(SSC_STATUS_PLL_LOCK_MASK, tmp); + + return ssc && pll ? 0 : -EIO; +} + +/* Limits operation to a specific generation (1, 2, or 3) */ +static void brcm_pcie_set_gen(struct brcm_pcie *pcie, int gen) +{ + void __iomem *base = pcie->base; + + u16 lnkctl2 = readw(base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCTL2); + u32 lnkcap = readl(base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCAP); + + lnkcap = (lnkcap & ~PCI_EXP_LNKCAP_SLS) | gen; + writel(lnkcap, base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCAP); + + lnkctl2 = (lnkctl2 & ~0xf) | gen; + writew(lnkctl2, base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCTL2); +} + +static void brcm_pcie_set_outbound_win(struct brcm_pcie *pcie, + unsigned int win, u64 phys_addr, + u64 pcie_addr, u64 size) +{ + void __iomem *base = pcie->base; + u32 phys_addr_mb_high, limit_addr_mb_high; + phys_addr_t phys_addr_mb, limit_addr_mb; + int high_addr_shift; + u32 tmp; + + /* Set the base of the pcie_addr window */ + writel(lower_32_bits(pcie_addr), base + PCIE_MEM_WIN0_LO(win)); + writel(upper_32_bits(pcie_addr), base + PCIE_MEM_WIN0_HI(win)); + + /* Write the addr base & limit lower bits (in MBs) */ + phys_addr_mb = phys_addr / SZ_1M; + limit_addr_mb = (phys_addr + size - 1) / SZ_1M; + + tmp = readl(base + PCIE_MEM_WIN0_BASE_LIMIT(win)); + u32p_replace_bits(&tmp, phys_addr_mb, + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_MASK); + u32p_replace_bits(&tmp, limit_addr_mb, + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_LIMIT_MASK); + writel(tmp, base + PCIE_MEM_WIN0_BASE_LIMIT(win)); + + /* Write the cpu & limit addr upper bits */ + high_addr_shift = PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_HI_SHIFT; + phys_addr_mb_high = phys_addr_mb >> high_addr_shift; + tmp = readl(base + PCIE_MEM_WIN0_BASE_HI(win)); + u32p_replace_bits(&tmp, phys_addr_mb_high, + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI_BASE_MASK); + writel(tmp, base + PCIE_MEM_WIN0_BASE_HI(win)); + + limit_addr_mb_high = limit_addr_mb >> high_addr_shift; + tmp = readl(base + PCIE_MEM_WIN0_LIMIT_HI(win)); + u32p_replace_bits(&tmp, limit_addr_mb_high, + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI_LIMIT_MASK); + writel(tmp, base + PCIE_MEM_WIN0_LIMIT_HI(win)); +} + +static int brcm_pcie_probe(struct udevice *dev) +{ + struct udevice *ctlr = pci_get_controller(dev); + struct pci_controller *hose = dev_get_uclass_priv(ctlr); + struct brcm_pcie *pcie = dev_get_priv(dev); + void __iomem *base = pcie->base; + bool ssc_good = false; + int num_out_wins = 0; + u64 rc_bar2_offset, rc_bar2_size; + unsigned int scb_size_val; + int i, ret; + u16 nlw, cls, lnksta; + u32 tmp; + + /* Reset the bridge */ + brcm_pcie_bridge_sw_init_set(pcie, 1); + + udelay(150); + + /* Take the bridge out of reset */ + brcm_pcie_bridge_sw_init_set(pcie, 0); + + tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG); + tmp &= ~PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK; + writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG); + /* Wait for SerDes to be stable */ + udelay(150); + + /* Set SCB_MAX_BURST_SIZE, CFG_READ_UR_MODE, SCB_ACCESS_EN */ + u32p_replace_bits(&tmp, 1, PCIE_MISC_MISC_CTRL_SCB_ACCESS_EN_MASK); + u32p_replace_bits(&tmp, 1, PCIE_MISC_MISC_CTRL_CFG_READ_UR_MODE_MASK); + u32p_replace_bits(&tmp, PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_128, + PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_MASK); + writel(tmp, base + PCIE_MISC_MISC_CTRL); + + /* + * TODO: Use the base address and size(s) provided in the dma-ranges + * property. + */ + rc_bar2_offset = 0; + rc_bar2_size = 1ULL << 32; + + tmp = lower_32_bits(rc_bar2_offset); + u32p_replace_bits(&tmp, brcm_pcie_encode_ibar_size(rc_bar2_size), + PCIE_MISC_RC_BAR2_CONFIG_LO_SIZE_MASK); + writel(tmp, base + PCIE_MISC_RC_BAR2_CONFIG_LO); + writel(upper_32_bits(rc_bar2_offset), + base + PCIE_MISC_RC_BAR2_CONFIG_HI); + + scb_size_val = rc_bar2_size ? + ilog2(rc_bar2_size) - 15 : 0xf; /* 0xf is 1GB */ + tmp = readl(base + PCIE_MISC_MISC_CTRL); + u32p_replace_bits(&tmp, scb_size_val, + PCIE_MISC_MISC_CTRL_SCB0_SIZE_MASK); + writel(tmp, base + PCIE_MISC_MISC_CTRL); + + /* Disable the PCIe->GISB memory window (RC_BAR1) */ + tmp = readl(base + PCIE_MISC_RC_BAR1_CONFIG_LO); + tmp &= ~PCIE_MISC_RC_BAR1_CONFIG_LO_SIZE_MASK; + writel(tmp, base + PCIE_MISC_RC_BAR1_CONFIG_LO); + + /* Disable the PCIe->SCB memory window (RC_BAR3) */ + tmp = readl(base + PCIE_MISC_RC_BAR3_CONFIG_LO); + tmp &= ~PCIE_MISC_RC_BAR3_CONFIG_LO_SIZE_MASK; + writel(tmp, base + PCIE_MISC_RC_BAR3_CONFIG_LO); + + /* Mask all interrupts since we are not handling any yet */ + writel(0xffffffff, base + PCIE_MSI_INTR2_MASK_SET); + + /* Clear any interrupts we find on boot */ + writel(0xffffffff, base + PCIE_MSI_INTR2_CLR); + + if (pcie->gen) + brcm_pcie_set_gen(pcie, pcie->gen); + + /* Unassert the fundamental reset */ + brcm_pcie_perst_set(pcie, 0); + + /* Give the RC/EP time to wake up, before trying to configure RC. + * Intermittently check status for link-up, up to a total of 100ms. + */ + for (i = 0; i < 100 && !brcm_pcie_link_up(pcie); i += 5) + msleep(5); + + if (!brcm_pcie_link_up(pcie)) { + printf("PCIe BRCM: link down\n"); + return -ENODEV; + } + + if (!brcm_pcie_rc_mode(pcie)) { + printf("PCIe misconfigured; is in EP mode\n"); + return -EINVAL; + } + + for (i = 0; i < hose->region_count; i++) { + struct pci_region *reg = &hose->regions[i]; + + if (reg->flags != PCI_REGION_MEM) + continue; + + if (num_out_wins >= BRCM_NUM_PCIE_OUT_WINS) + return -EINVAL; + + brcm_pcie_set_outbound_win(pcie, num_out_wins, reg->phys_start, + reg->bus_start, reg->size); + + num_out_wins++; + } + + /* + * For config space accesses on the RC, show the right class for + * a PCIe-PCIe bridge (the default setting is to be EP mode). + */ + tmp = readl(base + PCIE_RC_CFG_PRIV1_ID_VAL3); + u32p_replace_bits(&tmp, 0x060400, + PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK); + writel(tmp, base + PCIE_RC_CFG_PRIV1_ID_VAL3); + + if (pcie->ssc) { + ret = brcm_pcie_set_ssc(base); + if (ret == 0) + ssc_good = true; + else + printf("PCIe BRCM: failed attempt to enter SSC mode\n"); + } + + lnksta = readw(base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKSTA); + cls = FIELD_GET(PCI_EXP_LNKSTA_CLS, lnksta); + nlw = FIELD_GET(PCI_EXP_LNKSTA_NLW, lnksta); + + printf("PCIe BRCM: link up, %s Gbps x%u %s\n", link_speed_to_str(cls), + nlw, ssc_good ? "(SSC)" : "(!SSC)"); + + /* PCIe->SCB endian mode for BAR */ + tmp = readl(base + PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1); + u32p_replace_bits(&tmp, PCIE_RC_CFG_VENDOR_SPCIFIC_REG1_LITTLE_ENDIAN, + PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1_ENDIAN_MODE_BAR2_MASK); + writel(tmp, base + PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1); + + /* + * Refclk from RC should be gated with CLKREQ# input when ASPM L0s,L1 + * is enabled => setting the CLKREQ_DEBUG_ENABLE field to 1. + */ + tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG); + tmp |= PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK; + writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG); + + return 0; +} + +static int brcm_pcie_ofdata_to_platdata(struct udevice *dev) +{ + struct brcm_pcie *pcie = dev_get_priv(dev); + ofnode dn = dev_ofnode(dev); + u32 max_link_speed; + int ret; + + /* Get the controller base address */ + pcie->base = dev_read_addr_ptr(dev); + if (!pcie->base) + return -EINVAL; + + pcie->ssc = ofnode_read_bool(dn, "brcm,enable-ssc"); + + ret = ofnode_read_u32(dn, "max-link-speed", &max_link_speed); + if (ret < 0 || max_link_speed > 4) + pcie->gen = 0; + else + pcie->gen = max_link_speed; + + return 0; +} + +static const struct dm_pci_ops brcm_pcie_ops = { + .read_config = brcm_pcie_read_config, + .write_config = brcm_pcie_write_config, +}; + +static const struct udevice_id brcm_pcie_ids[] = { + { .compatible = "brcm,bcm2711-pcie" }, + { } +}; + +U_BOOT_DRIVER(pcie_brcm_base) = { + .name = "pcie_brcm", + .id = UCLASS_PCI, + .ops = &brcm_pcie_ops, + .of_match = brcm_pcie_ids, + .probe = brcm_pcie_probe, + .ofdata_to_platdata = brcm_pcie_ofdata_to_platdata, + .priv_auto_alloc_size = sizeof(struct brcm_pcie), +};