From patchwork Wed Apr 22 17:09:05 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ioana Ciornei X-Patchwork-Id: 238341 List-Id: U-Boot discussion From: ioana.ciornei at nxp.com (Ioana Ciornei) Date: Wed, 22 Apr 2020 20:09:05 +0300 Subject: [PATCH 3/6] arm: dts: lx2160aqds: add nodes describing possible mezzanine cards In-Reply-To: <20200422170908.19435-1-ioana.ciornei@nxp.com> References: <20200422170908.19435-1-ioana.ciornei@nxp.com> Message-ID: <20200422170908.19435-4-ioana.ciornei@nxp.com> Add device trees describing possible uses of mezzanine cards depending on the SERDES protocol employed. Each SERDES block has a different device tree file per protocol supported, where the IO SLOTs used are enabled and PHYs located on the mezzanine cards are described. Also, dpmac nodes are edited and their associated phy-connection-type and phy-handle are added. Top DTS files are also added for each combination of protocol on the 3 SERDES blocks. Signed-off-by: Ioana Ciornei --- arch/arm/dts/Makefile | 10 +- arch/arm/dts/fsl-lx2160a-qds-19-11-x.dts | 19 +++ arch/arm/dts/fsl-lx2160a-qds-19-x-x.dts | 17 +++ arch/arm/dts/fsl-lx2160a-qds-20-11-x.dts | 19 +++ arch/arm/dts/fsl-lx2160a-qds-20-x-x.dts | 17 +++ arch/arm/dts/fsl-lx2160a-qds-3-11-x.dts | 19 +++ arch/arm/dts/fsl-lx2160a-qds-3-x-x.dts | 17 +++ arch/arm/dts/fsl-lx2160a-qds-7-11-x.dts | 19 +++ arch/arm/dts/fsl-lx2160a-qds-7-x-x.dts | 17 +++ arch/arm/dts/fsl-lx2160a-qds-sd1-19.dtsi | 75 ++++++++++ arch/arm/dts/fsl-lx2160a-qds-sd1-20.dtsi | 39 +++++ arch/arm/dts/fsl-lx2160a-qds-sd1-3.dtsi | 55 +++++++ arch/arm/dts/fsl-lx2160a-qds-sd1-7.dtsi | 100 +++++++++++++ arch/arm/dts/fsl-lx2160a-qds-sd2-11.dtsi | 76 ++++++++++ arch/arm/dts/fsl-lx2160a-qds.dts | 180 +---------------------- arch/arm/dts/fsl-lx2160a-qds.dtsi | 169 +++++++++++++++++++++ 16 files changed, 670 insertions(+), 178 deletions(-) create mode 100644 arch/arm/dts/fsl-lx2160a-qds-19-11-x.dts create mode 100644 arch/arm/dts/fsl-lx2160a-qds-19-x-x.dts create mode 100644 arch/arm/dts/fsl-lx2160a-qds-20-11-x.dts create mode 100644 arch/arm/dts/fsl-lx2160a-qds-20-x-x.dts create mode 100644 arch/arm/dts/fsl-lx2160a-qds-3-11-x.dts create mode 100644 arch/arm/dts/fsl-lx2160a-qds-3-x-x.dts create mode 100644 arch/arm/dts/fsl-lx2160a-qds-7-11-x.dts create mode 100644 arch/arm/dts/fsl-lx2160a-qds-7-x-x.dts create mode 100644 arch/arm/dts/fsl-lx2160a-qds-sd1-19.dtsi create mode 100644 arch/arm/dts/fsl-lx2160a-qds-sd1-20.dtsi create mode 100644 arch/arm/dts/fsl-lx2160a-qds-sd1-3.dtsi create mode 100644 arch/arm/dts/fsl-lx2160a-qds-sd1-7.dtsi create mode 100644 arch/arm/dts/fsl-lx2160a-qds-sd2-11.dtsi create mode 100644 arch/arm/dts/fsl-lx2160a-qds.dtsi diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 6d1e8668e7ee..4fe042dbd7ee 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -377,7 +377,15 @@ dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \ fsl-ls1028a-rdb.dtb \ fsl-ls1028a-qds.dtb \ fsl-lx2160a-rdb.dtb \ - fsl-lx2160a-qds.dtb + fsl-lx2160a-qds.dtb \ + fsl-lx2160a-qds-3-x-x.dtb \ + fsl-lx2160a-qds-3-11-x.dtb \ + fsl-lx2160a-qds-7-x-x.dtb \ + fsl-lx2160a-qds-7-11-x.dtb \ + fsl-lx2160a-qds-19-x-x.dtb \ + fsl-lx2160a-qds-19-11-x.dtb \ + fsl-lx2160a-qds-20-x-x.dtb \ + fsl-lx2160a-qds-20-11-x.dtb dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \ fsl-ls1043a-qds-lpuart.dtb \ fsl-ls1043a-rdb.dtb \ diff --git a/arch/arm/dts/fsl-lx2160a-qds-19-11-x.dts b/arch/arm/dts/fsl-lx2160a-qds-19-11-x.dts new file mode 100644 index 000000000000..585759162f6c --- /dev/null +++ b/arch/arm/dts/fsl-lx2160a-qds-19-11-x.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * NXP LX2160AQDS device tree source for SERDES protocol 19.11.x + * + * Copyright 2020 NXP + * + */ + +/dts-v1/; + +#include "fsl-lx2160a-qds-sd1-19.dtsi" + +#include "fsl-lx2160a-qds-sd2-11.dtsi" + +/ { + model = "NXP Layerscape LX2160AQDS Board (DTS 19.11.x)"; + compatible = "fsl,lx2160aqds", "fsl,lx2160a"; + +}; diff --git a/arch/arm/dts/fsl-lx2160a-qds-19-x-x.dts b/arch/arm/dts/fsl-lx2160a-qds-19-x-x.dts new file mode 100644 index 000000000000..ebe11396a6cb --- /dev/null +++ b/arch/arm/dts/fsl-lx2160a-qds-19-x-x.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * NXP LX2160AQDS device tree source for SERDES protocol 19.x.x + * + * Copyright 2020 NXP + * + */ + +/dts-v1/; + +#include "fsl-lx2160a-qds-sd1-19.dtsi" + +/ { + model = "NXP Layerscape LX2160AQDS Board (DTS 19.x.x)"; + compatible = "fsl,lx2160aqds", "fsl,lx2160a"; + +}; diff --git a/arch/arm/dts/fsl-lx2160a-qds-20-11-x.dts b/arch/arm/dts/fsl-lx2160a-qds-20-11-x.dts new file mode 100644 index 000000000000..d9f091896746 --- /dev/null +++ b/arch/arm/dts/fsl-lx2160a-qds-20-11-x.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * NXP LX2160AQDS device tree source for SERDES protocol 20.11.x + * + * Copyright 2020 NXP + * + */ + +/dts-v1/; + +#include "fsl-lx2160a-qds-sd1-20.dtsi" + +#include "fsl-lx2160a-qds-sd2-11.dtsi" + +/ { + model = "NXP Layerscape LX2160AQDS Board (DTS 20.11.x)"; + compatible = "fsl,lx2160aqds", "fsl,lx2160a"; + +}; diff --git a/arch/arm/dts/fsl-lx2160a-qds-20-x-x.dts b/arch/arm/dts/fsl-lx2160a-qds-20-x-x.dts new file mode 100644 index 000000000000..735d440d3737 --- /dev/null +++ b/arch/arm/dts/fsl-lx2160a-qds-20-x-x.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * NXP LX2160AQDS device tree source for SERDES protocol 20.x.x + * + * Copyright 2020 NXP + * + */ + +/dts-v1/; + +#include "fsl-lx2160a-qds-sd1-20.dtsi" + +/ { + model = "NXP Layerscape LX2160AQDS Board (DTS 20.x.x)"; + compatible = "fsl,lx2160aqds", "fsl,lx2160a"; + +}; diff --git a/arch/arm/dts/fsl-lx2160a-qds-3-11-x.dts b/arch/arm/dts/fsl-lx2160a-qds-3-11-x.dts new file mode 100644 index 000000000000..3b21c87b9329 --- /dev/null +++ b/arch/arm/dts/fsl-lx2160a-qds-3-11-x.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * NXP LX2160AQDS device tree source for SERDES protocol 3.11.x + * + * Copyright 2020 NXP + * + */ + +/dts-v1/; + +#include "fsl-lx2160a-qds-sd1-3.dtsi" + +#include "fsl-lx2160a-qds-sd2-11.dtsi" + +/ { + model = "NXP Layerscape LX2160AQDS Board (DTS 3.11.x)"; + compatible = "fsl,lx2160aqds", "fsl,lx2160a"; + +}; diff --git a/arch/arm/dts/fsl-lx2160a-qds-3-x-x.dts b/arch/arm/dts/fsl-lx2160a-qds-3-x-x.dts new file mode 100644 index 000000000000..ede40563f71e --- /dev/null +++ b/arch/arm/dts/fsl-lx2160a-qds-3-x-x.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * NXP LX2160AQDS device tree source for SERDES protocol 3.x.x + * + * Copyright 2020 NXP + * + */ + +/dts-v1/; + +#include "fsl-lx2160a-qds-sd1-3.dtsi" + +/ { + model = "NXP Layerscape LX2160AQDS Board (DTS 3.x.x)"; + compatible = "fsl,lx2160aqds", "fsl,lx2160a"; + +}; diff --git a/arch/arm/dts/fsl-lx2160a-qds-7-11-x.dts b/arch/arm/dts/fsl-lx2160a-qds-7-11-x.dts new file mode 100644 index 000000000000..8100af47271a --- /dev/null +++ b/arch/arm/dts/fsl-lx2160a-qds-7-11-x.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * NXP LX2160AQDS device tree source for SERDES protocol 7.11.x + * + * Copyright 2020 NXP + * + */ + +/dts-v1/; + +#include "fsl-lx2160a-qds-sd1-7.dtsi" + +#include "fsl-lx2160a-qds-sd2-11.dtsi" + +/ { + model = "NXP Layerscape LX2160AQDS Board (DTS 7.11.x)"; + compatible = "fsl,lx2160aqds", "fsl,lx2160a"; + +}; diff --git a/arch/arm/dts/fsl-lx2160a-qds-7-x-x.dts b/arch/arm/dts/fsl-lx2160a-qds-7-x-x.dts new file mode 100644 index 000000000000..15dee3587f91 --- /dev/null +++ b/arch/arm/dts/fsl-lx2160a-qds-7-x-x.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * NXP LX2160AQDS device tree source for SERDES protocol 7.x.x + * + * Copyright 2020 NXP + * + */ + +/dts-v1/; + +#include "fsl-lx2160a-qds-sd1-7.dtsi" + +/ { + model = "NXP Layerscape LX2160AQDS Board (DTS 7-x-x)"; + compatible = "fsl,lx2160aqds", "fsl,lx2160a"; + +}; diff --git a/arch/arm/dts/fsl-lx2160a-qds-sd1-19.dtsi b/arch/arm/dts/fsl-lx2160a-qds-sd1-19.dtsi new file mode 100644 index 000000000000..a31ff8a1bd85 --- /dev/null +++ b/arch/arm/dts/fsl-lx2160a-qds-sd1-19.dtsi @@ -0,0 +1,75 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * NXP LX2160AQDS device tree source for the SERDES block #1 - protocol 19 + * + * Some assumptions are made: + * * mezzanine card M11 is connected to IO SLOT1 (usxgmii for DPMAC 3,4) + * * mezzanine card M13 is connected to IO SLOT6 (25g-aui for DPMAC 5,6) + * * mezzanine card M7 is connected to IO SLOT2 (xlaui4 for DPMAC 2) + * + * Copyright 2020 NXP + * + */ + +#include "fsl-lx2160a-qds.dtsi" + +&dpmac2 { + status = "okay"; + phy-handle = <&cortina_phy0>; + phy-connection-type = "xlaui4"; +}; + +&dpmac3 { + status = "okay"; + phy-handle = <&aquantia_phy1>; + phy-connection-type = "usxgmii"; +}; + +&dpmac4 { + status = "okay"; + phy-handle = <&aquantia_phy2>; + phy-connection-type = "usxgmii"; +}; + +&dpmac5 { + status = "okay"; + phy-handle = <&inphi_phy0>; + phy-connection-type = "25g-aui"; +}; + +&dpmac6 { + status = "okay"; + phy-handle = <&inphi_phy1>; + phy-connection-type = "25g-aui"; +}; + +&emdio1_slot1 { + aquantia_phy1: ethernet-phy at 4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; + + aquantia_phy2: ethernet-phy at 5 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x1>; + }; +}; + +&emdio1_slot2 { + cortina_phy0: ethernet-phy at 0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; +}; + +&emdio1_slot6 { + inphi_phy0: ethernet-phy at 0 { + compatible = "ethernet-phy-id0210.7440"; + reg = <0x0>; + }; + + inphi_phy1: ethernet-phy at 1 { + compatible = "ethernet-phy-id0210.7440"; + reg = <0x1>; + }; +}; diff --git a/arch/arm/dts/fsl-lx2160a-qds-sd1-20.dtsi b/arch/arm/dts/fsl-lx2160a-qds-sd1-20.dtsi new file mode 100644 index 000000000000..42e149691d5b --- /dev/null +++ b/arch/arm/dts/fsl-lx2160a-qds-sd1-20.dtsi @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * NXP LX2160AQDS device tree source for the SERDES block #1 - protocol 20 + * + * Some assumptions are made: + * * 2 mezzanine cards M13 are connected to IO SLOT1 and IO SLOT2 + * (xlaui4 for DPMAC 1,2) + * + * Copyright 2020 NXP + * + */ + +#include "fsl-lx2160a-qds.dtsi" + +&dpmac1 { + status = "okay"; + phy-handle = <&cortina_phy1_0>; + phy-connection-type = "xlaui4"; +}; + +&dpmac2 { + status = "okay"; + phy-handle = <&cortina_phy2_0>; + phy-connection-type = "xlaui4"; +}; + +&emdio1_slot1 { + cortina_phy1_0: ethernet-phy at 0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; +}; + +&emdio1_slot2 { + cortina_phy2_0: ethernet-phy at 0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; +}; diff --git a/arch/arm/dts/fsl-lx2160a-qds-sd1-3.dtsi b/arch/arm/dts/fsl-lx2160a-qds-sd1-3.dtsi new file mode 100644 index 000000000000..256d784aca84 --- /dev/null +++ b/arch/arm/dts/fsl-lx2160a-qds-sd1-3.dtsi @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * NXP LX2160AQDS device tree source for the SERDES block #1 - protocol 3 + * + * Some assumptions are made: + * * mezzanine card M11 is connected to IO SLOT1 (usxgmii for DPMAC 3,4,5,6) + * + * Copyright 2020 NXP + * + */ + +#include "fsl-lx2160a-qds.dtsi" + +&dpmac3 { + status = "okay"; + phy-handle = <&aquantia_phy1>; + phy-connection-type = "usxgmii"; +}; + +&dpmac4 { + status = "okay"; + phy-handle = <&aquantia_phy2>; + phy-connection-type = "usxgmii"; +}; + +&dpmac5 { + status = "okay"; + phy-handle = <&aquantia_phy3>; + phy-connection-type = "usxgmii"; +}; + +&dpmac6 { + status = "okay"; + phy-handle = <&aquantia_phy4>; + phy-connection-type = "usxgmii"; +}; + +&emdio1_slot1 { + aquantia_phy1: ethernet-phy at 4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; + aquantia_phy2: ethernet-phy at 5 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x1>; + }; + aquantia_phy3: ethernet-phy at 6 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x2>; + }; + aquantia_phy4: ethernet-phy at 7 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x3>; + }; +}; diff --git a/arch/arm/dts/fsl-lx2160a-qds-sd1-7.dtsi b/arch/arm/dts/fsl-lx2160a-qds-sd1-7.dtsi new file mode 100644 index 000000000000..5fcf846c1066 --- /dev/null +++ b/arch/arm/dts/fsl-lx2160a-qds-sd1-7.dtsi @@ -0,0 +1,100 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * NXP LX2160AQDS device tree source for the SERDES block #1 - protocol 7 + * + * Some assumptions are made: + * * mezzanine card M11 is connected to IO SLOT1 (usxgmii for DPMAC 3,4,5,6) + * * mezzanine card M1/M4 is connected to IO SLOT2 (sgmii for DPMAC 7,8,9,10) + * + * Copyright 2020 NXP + * + */ +#include "fsl-lx2160a-qds.dtsi" + +&dpmac3 { + status = "okay"; + phy-handle = <&aquantia_phy1>; + phy-connection-type = "usxgmii"; +}; + +&dpmac4 { + status = "okay"; + phy-handle = <&aquantia_phy2>; + phy-connection-type = "usxgmii"; +}; + +&dpmac5 { + status = "okay"; + phy-handle = <&aquantia_phy3>; + phy-connection-type = "usxgmii"; +}; + +&dpmac6 { + status = "okay"; + phy-handle = <&aquantia_phy4>; + phy-connection-type = "usxgmii"; +}; + +&dpmac7 { + status = "okay"; + phy-handle = <&sgmii_phy1>; + phy-connection-type = "sgmii"; +}; + +&dpmac8 { + status = "okay"; + phy-handle = <&sgmii_phy2>; + phy-connection-type = "sgmii"; +}; + +&dpmac9 { + status = "okay"; + phy-handle = <&sgmii_phy3>; + phy-connection-type = "sgmii"; +}; + +&dpmac10 { + status = "okay"; + phy-handle = <&sgmii_phy4>; + phy-connection-type = "sgmii"; +}; + +&emdio1_slot1 { + aquantia_phy1: ethernet-phy at 4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; + + aquantia_phy2: ethernet-phy at 5 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x1>; + }; + + aquantia_phy3: ethernet-phy at 6 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x2>; + }; + + aquantia_phy4: ethernet-phy at 7 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x3>; + }; +}; + +&emdio1_slot2 { + sgmii_phy1: ethernet-phy at 1c { + reg = <0x1c>; + }; + + sgmii_phy2: ethernet-phy at 1d { + reg = <0x1d>; + }; + + sgmii_phy3: ethernet-phy at 1e { + reg = <0x1e>; + }; + + sgmii_phy4: ethernet-phy at 1f { + reg = <0x1f>; + }; +}; diff --git a/arch/arm/dts/fsl-lx2160a-qds-sd2-11.dtsi b/arch/arm/dts/fsl-lx2160a-qds-sd2-11.dtsi new file mode 100644 index 000000000000..cf09f98aa60f --- /dev/null +++ b/arch/arm/dts/fsl-lx2160a-qds-sd2-11.dtsi @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * NXP LX2160AQDS device tree source for the SERDES block #2 - protocol 11 + * + * Some assumptions are made: + * * 2 mezzanine cards M1/M4 are connected to IO SLOT 7 and IO SLOT 8 + * (sgmii for DPMAC 12, 13, 14, 16, 17, 18) + * + * Copyright 2020 NXP + * + */ +#include "fsl-lx2160a-qds.dtsi" + +&dpmac12 { + status = "okay"; + phy-handle = <&sgmii_phy7_2>; + phy-connection-type = "sgmii"; +}; + +&dpmac17 { + status = "okay"; + phy-handle = <&sgmii_phy7_3>; + phy-connection-type = "sgmii"; +}; + +&dpmac18 { + status = "okay"; + phy-handle = <&sgmii_phy7_4>; + phy-connection-type = "sgmii"; +}; + +&dpmac16 { + status = "okay"; + phy-handle = <&sgmii_phy8_2>; + phy-connection-type = "sgmii"; +}; + +&dpmac13 { + status = "okay"; + phy-handle = <&sgmii_phy8_3>; + phy-connection-type = "sgmii"; +}; + +&dpmac14 { + status = "okay"; + phy-handle = <&sgmii_phy8_4>; + phy-connection-type = "sgmii"; +}; + +&emdio1_slot7 { + sgmii_phy7_2: ethernet-phy at 1d { + reg = <0x1d>; + }; + + sgmii_phy7_3: ethernet-phy at 1e { + reg = <0x1e>; + }; + + sgmii_phy7_4: ethernet-phy at 1f { + reg = <0x1f>; + }; +}; + +&emdio1_slot8 { + sgmii_phy8_2: ethernet-phy at 1d { + reg = <0x1d>; + }; + + sgmii_phy8_3: ethernet-phy at 1e { + reg = <0x1e>; + }; + + sgmii_phy8_4: ethernet-phy at 1f { + reg = <0x1f>; + }; +}; diff --git a/arch/arm/dts/fsl-lx2160a-qds.dts b/arch/arm/dts/fsl-lx2160a-qds.dts index 4946ce8dfba8..e0f5d5e2d38f 100644 --- a/arch/arm/dts/fsl-lx2160a-qds.dts +++ b/arch/arm/dts/fsl-lx2160a-qds.dts @@ -1,14 +1,14 @@ // SPDX-License-Identifier: GPL-2.0+ OR X11 /* - * NXP LX2160AQDS device tree source + * NXP LX2160AQDS default device tree source * - * Copyright 2018-2020 NXP + * Copyright 2020 NXP * */ /dts-v1/; -#include "fsl-lx2160a.dtsi" +#include "fsl-lx2160a-qds.dtsi" / { model = "NXP Layerscape LX2160AQDS Board"; @@ -17,177 +17,3 @@ spi0 = &fspi; }; }; - -&dpmac17 { - status = "okay"; - phy-handle = <&rgmii_phy1>; - phy-connection-type = "rgmii-id"; -}; - -&dpmac18 { - status = "okay"; - phy-handle = <&rgmii_phy2>; - phy-connection-type = "rgmii-id"; -}; - -&emdio1 { - status = "okay"; -}; - -&emdio2 { - status = "okay"; -}; - -&esdhc0 { - status = "okay"; -}; - -&esdhc1 { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - u-boot,dm-pre-reloc; - - fpga at 66 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "simple-mfd"; - reg = <0x66>; - - mux-mdio at 54 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "mdio-mux-i2creg"; - reg = <0x54>; - #mux-control-cells = <1>; - mux-reg-masks = <0x54 0xf8>; // reg 0x54, bits 7:3 - mdio-parent-bus = <&emdio1>; - - mdio at 00 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x00>; - - rgmii_phy1: ethernet-phy at 1 { - reg = <0x1>; - }; - }; - mdio at 08 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x40>; - - rgmii_phy2: ethernet-phy at 2 { - reg = <0x2>; - }; - }; - - emdio1_slot1: mdio at c0 { /* I/O Slot #1 */ - reg = <0xC0>; - device-name = "emdio1_slot1"; - #address-cells = <1>; - #size-cells = <0>; - }; - - emdio1_slot2: mdio at c8 { /* I/O Slot #2 */ - reg = <0xC8>; - device-name = "emdio1_slot2"; - #address-cells = <1>; - #size-cells = <0>; - }; - - emdio1_slot3: mdio at d0 { /* I/O Slot #3 */ - reg = <0xD0>; - device-name = "emdio1_slot3"; - #address-cells = <1>; - #size-cells = <0>; - }; - - emdio1_slot4: mdio at d8 { /* I/O Slot #4 */ - reg = <0xD8>; - device-name = "emdio1_slot4"; - #address-cells = <1>; - #size-cells = <0>; - }; - - emdio1_slot5: mdio at e0 { /* I/O Slot #5 */ - reg = <0xE0>; - device-name = "emdio1_slot5"; - #address-cells = <1>; - #size-cells = <0>; - }; - - emdio1_slot6: mdio at e8 { /* I/O Slot #6 */ - reg = <0xE8>; - device-name = "emdio1_slot6"; - #address-cells = <1>; - #size-cells = <0>; - }; - - emdio1_slot7: mdio at f0 { /* I/O Slot #7 */ - reg = <0xF0>; - device-name = "emdio1_slot7"; - #address-cells = <1>; - #size-cells = <0>; - }; - - emdio1_slot8: mdio at f8 { /* I/O Slot #8 */ - reg = <0xF8>; - device-name = "emdio1_slot8"; - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - }; - - i2c-mux at 77 { - compatible = "nxp,pca9547"; - reg = <0x77>; - #address-cells = <1>; - #size-cells = <0>; - - i2c at 3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x3>; - - rtc at 51 { - compatible = "pcf2127-rtc"; - reg = <0x51>; - }; - }; - }; -}; - -&fspi { - status = "okay"; - - mt35xu512aba0: flash at 0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <50000000>; - reg = <0>; - spi-rx-bus-width = <8>; - spi-tx-bus-width = <1>; - }; -}; - -&sata0 { - status = "okay"; -}; - -&sata1 { - status = "okay"; -}; - -&sata2 { - status = "okay"; -}; - -&sata3 { - status = "okay"; -}; diff --git a/arch/arm/dts/fsl-lx2160a-qds.dtsi b/arch/arm/dts/fsl-lx2160a-qds.dtsi new file mode 100644 index 000000000000..129cf82a8f37 --- /dev/null +++ b/arch/arm/dts/fsl-lx2160a-qds.dtsi @@ -0,0 +1,169 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * NXP LX2160AQDS common device tree source + * + * Copyright 2018-2019 NXP + * + */ + +#include "fsl-lx2160a.dtsi" + +&dpmac17 { + status = "okay"; + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii-id"; +}; + +&dpmac18 { + status = "okay"; + phy-handle = <&rgmii_phy2>; + phy-connection-type = "rgmii-id"; +}; + +&emdio1 { + status = "okay"; +}; + +&emdio2 { + status = "okay"; +}; + +&esdhc0 { + status = "okay"; +}; + +&esdhc1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + u-boot,dm-pre-reloc; + + fpga at 66 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "simple-mfd"; + reg = <0x66>; + + mux-mdio at 54 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mdio-mux-i2creg"; + reg = <0x54>; + #mux-control-cells = <1>; + mux-reg-masks = <0x54 0xf8>; // reg 0x54, bits 7:3 + mdio-parent-bus = <&emdio1>; + + mdio at 00 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x00>; + + rgmii_phy1: ethernet-phy at 1 { + reg = <0x1>; + }; + }; + mdio at 08 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x40>; + + rgmii_phy2: ethernet-phy at 2 { + reg = <0x2>; + }; + }; + + emdio1_slot1: mdio at c0 { /* I/O Slot #1 */ + reg = <0xC0>; + device-name = "emdio1_slot1"; + #address-cells = <1>; + #size-cells = <0>; + }; + + emdio1_slot2: mdio at c8 { /* I/O Slot #2 */ + reg = <0xC8>; + device-name = "emdio1_slot2"; + #address-cells = <1>; + #size-cells = <0>; + }; + + emdio1_slot3: mdio at d0 { /* I/O Slot #3 */ + reg = <0xD0>; + device-name = "emdio1_slot3"; + #address-cells = <1>; + #size-cells = <0>; + }; + + emdio1_slot4: mdio at d8 { /* I/O Slot #4 */ + reg = <0xD8>; + device-name = "emdio1_slot4"; + #address-cells = <1>; + #size-cells = <0>; + }; + + emdio1_slot5: mdio at e0 { /* I/O Slot #5 */ + reg = <0xE0>; + device-name = "emdio1_slot5"; + #address-cells = <1>; + #size-cells = <0>; + }; + + emdio1_slot6: mdio at e8 { /* I/O Slot #6 */ + reg = <0xE8>; + device-name = "emdio1_slot6"; + #address-cells = <1>; + #size-cells = <0>; + }; + + emdio1_slot7: mdio at f0 { /* I/O Slot #7 */ + reg = <0xF0>; + device-name = "emdio1_slot7"; + #address-cells = <1>; + #size-cells = <0>; + }; + + emdio1_slot8: mdio at f8 { /* I/O Slot #8 */ + reg = <0xF8>; + device-name = "emdio1_slot8"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + }; + + i2c-mux at 77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c at 3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + rtc at 51 { + compatible = "pcf2127-rtc"; + reg = <0x51>; + }; + }; + }; +}; + +&sata0 { + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&sata2 { + status = "okay"; +}; + +&sata3 { + status = "okay"; +};