From patchwork Tue Apr 14 09:30:21 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Zhiqiang Hou X-Patchwork-Id: 237776 List-Id: U-Boot discussion From: Zhiqiang.Hou at nxp.com (Zhiqiang Hou) Date: Tue, 14 Apr 2020 17:30:21 +0800 Subject: [PATCH 3/4] powerpc: P1010RDB: Disable legacy PCIe driver when DM_PCI is enabled In-Reply-To: <20200414093022.24132-1-Zhiqiang.Hou@nxp.com> References: <20200414093022.24132-1-Zhiqiang.Hou@nxp.com> Message-ID: <20200414093022.24132-4-Zhiqiang.Hou@nxp.com> From: Hou Zhiqiang Disable legacy PCIe driver and unused PCIe macros when DM_PCI enabled for P1010RDB board. Signed-off-by: Hou Zhiqiang --- include/configs/P1010RDB.h | 42 +++++++++++++++++++++++--------------- 1 file changed, 26 insertions(+), 16 deletions(-) diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index 60e8904d42..7c178ac53a 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -113,8 +113,6 @@ #if defined(CONFIG_PCI) #define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */ #define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */ -#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ /* @@ -122,19 +120,13 @@ * Memory space is mapped 1-1, but I/O space must start from 0. */ /* controller 1, Slot 1, tgtid 1, Base address a000 */ -#define CONFIG_SYS_PCIE1_NAME "mini PCIe Slot" #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull #else -#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 #endif -#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000 -#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 -#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ #ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc00000ull #else @@ -142,27 +134,45 @@ #endif /* controller 2, Slot 2, tgtid 2, Base address 9000 */ +#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull +#else +#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 +#endif +#define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull +#else +#define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 +#endif + +#if !defined(CONFIG_DM_PCI) +#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ +#define CONFIG_SYS_PCIE1_NAME "mini PCIe Slot" +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 +#else +#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 +#endif +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ + #if defined(CONFIG_TARGET_P1010RDB_PA) #define CONFIG_SYS_PCIE2_NAME "PCIe Slot" #elif defined(CONFIG_TARGET_P1010RDB_PB) #define CONFIG_SYS_PCIE2_NAME "mini PCIe Slot" #endif -#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 #ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000 -#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull #else #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 -#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 #endif #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull -#else -#define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 #endif #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */