diff mbox series

[3/4] powerpc: P1010RDB: Disable legacy PCIe driver when DM_PCI is enabled

Message ID 20200414093022.24132-4-Zhiqiang.Hou@nxp.com
State New
Headers show
Series P1010RDB: Add device tree support and enable DM PCIe driver | expand

Commit Message

Zhiqiang Hou April 14, 2020, 9:30 a.m. UTC 
From: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>

Disable legacy PCIe driver and unused PCIe macros when DM_PCI enabled
for P1010RDB board.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
---
 include/configs/P1010RDB.h | 42 +++++++++++++++++++++++---------------
 1 file changed, 26 insertions(+), 16 deletions(-)
diff mbox series

Patch

diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index 60e8904d42..7c178ac53a 100644
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -113,8 +113,6 @@ 
 #if defined(CONFIG_PCI)
 #define CONFIG_PCIE1			/* PCIE controller 1 (slot 1) */
 #define CONFIG_PCIE2			/* PCIE controller 2 (slot 2) */
-#define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
-#define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
 #define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
 
 /*
@@ -122,19 +120,13 @@ 
  * Memory space is mapped 1-1, but I/O space must start from 0.
  */
 /* controller 1, Slot 1, tgtid 1, Base address a000 */
-#define CONFIG_SYS_PCIE1_NAME		"mini PCIe Slot"
 #define CONFIG_SYS_PCIE1_MEM_VIRT	0x80000000
 #ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCIE1_MEM_BUS	0x80000000
 #define CONFIG_SYS_PCIE1_MEM_PHYS	0xc00000000ull
 #else
-#define CONFIG_SYS_PCIE1_MEM_BUS	0x80000000
 #define CONFIG_SYS_PCIE1_MEM_PHYS	0x80000000
 #endif
-#define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
 #define CONFIG_SYS_PCIE1_IO_VIRT	0xffc00000
-#define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */
 #ifdef CONFIG_PHYS_64BIT
 #define CONFIG_SYS_PCIE1_IO_PHYS	0xfffc00000ull
 #else
@@ -142,27 +134,45 @@ 
 #endif
 
 /* controller 2, Slot 2, tgtid 2, Base address 9000 */
+#define CONFIG_SYS_PCIE2_MEM_VIRT	0xa0000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE2_MEM_PHYS	0xc20000000ull
+#else
+#define CONFIG_SYS_PCIE2_MEM_PHYS	0xa0000000
+#endif
+#define CONFIG_SYS_PCIE2_IO_VIRT	0xffc10000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE2_IO_PHYS	0xfffc10000ull
+#else
+#define CONFIG_SYS_PCIE2_IO_PHYS	0xffc10000
+#endif
+
+#if !defined(CONFIG_DM_PCI)
+#define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
+#define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
+#define CONFIG_SYS_PCIE1_NAME		"mini PCIe Slot"
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE1_MEM_BUS	0x80000000
+#else
+#define CONFIG_SYS_PCIE1_MEM_BUS	0x80000000
+#endif
+#define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
+#define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */
+
 #if defined(CONFIG_TARGET_P1010RDB_PA)
 #define CONFIG_SYS_PCIE2_NAME		"PCIe Slot"
 #elif defined(CONFIG_TARGET_P1010RDB_PB)
 #define CONFIG_SYS_PCIE2_NAME		"mini PCIe Slot"
 #endif
-#define CONFIG_SYS_PCIE2_MEM_VIRT	0xa0000000
 #ifdef CONFIG_PHYS_64BIT
 #define CONFIG_SYS_PCIE2_MEM_BUS	0xc0000000
-#define CONFIG_SYS_PCIE2_MEM_PHYS	0xc20000000ull
 #else
 #define CONFIG_SYS_PCIE2_MEM_BUS	0xa0000000
-#define CONFIG_SYS_PCIE2_MEM_PHYS	0xa0000000
 #endif
 #define CONFIG_SYS_PCIE2_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCIE2_IO_VIRT	0xffc10000
 #define CONFIG_SYS_PCIE2_IO_BUS		0x00000000
 #define CONFIG_SYS_PCIE2_IO_SIZE	0x00010000	/* 64k */
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCIE2_IO_PHYS	0xfffc10000ull
-#else
-#define CONFIG_SYS_PCIE2_IO_PHYS	0xffc10000
 #endif
 
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */