From patchwork Thu Apr 9 20:15:03 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Simon Glass X-Patchwork-Id: 237533 List-Id: U-Boot discussion From: sjg at chromium.org (Simon Glass) Date: Thu, 9 Apr 2020 14:15:03 -0600 Subject: [PATCH v2 19/22] Fix some checkpatch warnings in calls to udelay() In-Reply-To: <20200409201506.133129-1-sjg@chromium.org> References: <20200409201506.133129-1-sjg@chromium.org> Message-ID: <20200409201506.133129-5-sjg@chromium.org> Fix up some incorrect code style in calls to functions in the linux/time.h header, mostly udelay(). Signed-off-by: Simon Glass --- Changes in v2: - Split out code-style changes for time functions into a new patch arch/arm/cpu/sa1100/timer.c | 2 +- board/sbc8641d/sbc8641d.c | 8 ++++---- cmd/mem.c | 4 ++-- drivers/ata/sata_sil3114.c | 16 ++++++++-------- drivers/fpga/stratixII.c | 6 +++--- drivers/net/ax88180.c | 10 +++++----- drivers/net/eepro100.c | 18 +++++++++--------- drivers/net/lan91c96.c | 10 +++++----- drivers/net/rtl8139.c | 6 +++--- drivers/net/smc91111.c | 22 +++++++++++----------- drivers/qe/uec_phy.c | 6 +++--- drivers/rtc/ds1306.c | 26 +++++++++++++------------- drivers/video/mb862xx.c | 6 +++--- examples/standalone/smc91111_eeprom.c | 6 +++--- lib/time.c | 2 +- 15 files changed, 74 insertions(+), 74 deletions(-) diff --git a/arch/arm/cpu/sa1100/timer.c b/arch/arm/cpu/sa1100/timer.c index 8e20c96bcda..f2cbee5dca7 100644 --- a/arch/arm/cpu/sa1100/timer.c +++ b/arch/arm/cpu/sa1100/timer.c @@ -23,7 +23,7 @@ ulong get_timer (ulong base) return get_timer_masked (); } -void __udelay (unsigned long usec) +void __udelay(unsigned long usec) { ulong tmo; ulong endtime; diff --git a/board/sbc8641d/sbc8641d.c b/board/sbc8641d/sbc8641d.c index 2346564c7d0..91867d4f3d2 100644 --- a/board/sbc8641d/sbc8641d.c +++ b/board/sbc8641d/sbc8641d.c @@ -123,12 +123,12 @@ long int fixed_sdram (void) asm ("sync;isync"); - udelay (500); + udelay(500); ddr->sdram_cfg = CONFIG_SYS_DDR_CFG_1B; asm ("sync; isync"); - udelay (500); + udelay(500); ddr = &immap->im_ddr2; ddr->cs0_bnds = CONFIG_SYS_DDR2_CS0_BNDS; @@ -154,12 +154,12 @@ long int fixed_sdram (void) asm ("sync;isync"); - udelay (500); + udelay(500); ddr->sdram_cfg = CONFIG_SYS_DDR2_CFG_1B; asm ("sync; isync"); - udelay (500); + udelay(500); #endif return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; } diff --git a/cmd/mem.c b/cmd/mem.c index 13641de63c9..0a5aa8b47cb 100644 --- a/cmd/mem.c +++ b/cmd/mem.c @@ -189,7 +189,7 @@ static int do_mem_mdc(struct cmd_tbl *cmdtp, int flag, int argc, /* delay for ms... */ for (i=0; i ms... */ for (i=0; i= 2ms" before checking status. @@ -121,7 +121,7 @@ static void sata_identify (int num, int dev) cmd = ATA_CMD_ID_ATA; /*Device Identify Command */ writeb (cmd, port[num].ioaddr.command_addr); readb (port[num].ioaddr.altstatus_addr); - udelay (10); + udelay(10); status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 1000, 0); if (status & ATA_ERR) { @@ -194,7 +194,7 @@ static void set_Feature_cmd (int num, int dev) writeb (ATA_DEVICE_OBS, port[num].ioaddr.device_addr); writeb (ATA_CMD_SET_FEATURES, port[num].ioaddr.command_addr); - udelay (50); + udelay(50); msleep (150); status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 5000, 0); @@ -392,7 +392,7 @@ static u8 wait_for_irq (int num, unsigned int max) if (readl (port) & VND_TF_CNST_INTST) { break; } - udelay (1000); + udelay(1000); max--; } while ((max > 0)); @@ -408,7 +408,7 @@ static u8 sata_busy_wait (struct sata_ioports *ioaddr, int bits, if (!((status = sata_chk_status (ioaddr, usealtstatus)) & bits)) { break; } - udelay (1000); + udelay(1000); max--; } while ((status & bits) && (max > 0)); @@ -429,7 +429,7 @@ static void msleep (int count) int i; for (i = 0; i < count; i++) - udelay (1000); + udelay(1000); } /* Read up to 255 sectors @@ -616,7 +616,7 @@ ulong sata_write (int device, ulong block, lbaint_t blkcnt, const void *buff) output_data (&port[num].ioaddr, buffer, ATA_SECTOR_WORDS); readb (port[num].ioaddr.altstatus_addr); - udelay (50); + udelay(50); ++n; ++blknr; diff --git a/drivers/fpga/stratixII.c b/drivers/fpga/stratixII.c index 12d8dd19bf6..4edbfe4ba87 100644 --- a/drivers/fpga/stratixII.c +++ b/drivers/fpga/stratixII.c @@ -116,9 +116,9 @@ int StratixII_ps_fpp_load (Altera_desc * desc, void *buf, size_t bsize, /* 2. Strat burn cycle by deasserting config for t_CFG and waiting t_CF2CK after reaserted */ fns->config (0, 1, cookie); - udelay (5); /* nCONFIG low pulse width 2usec */ + udelay(5); /* nCONFIG low pulse width 2usec */ fns->config (1, 1, cookie); - udelay (100); /* nCONFIG high to first rising edge on DCLK */ + udelay(100); /* nCONFIG high to first rising edge on DCLK */ /* 3. Start the Data cycle with clk deasserted */ bytecount = 0; @@ -168,7 +168,7 @@ int StratixII_ps_fpp_load (Altera_desc * desc, void *buf, size_t bsize, /* 4. Set one last clock and check conf done signal */ fns->clk (1, 1, cookie); - udelay (100); + udelay(100); if (!fns->done (cookie)) { printf (" error!.\n"); fns->abort (cookie); diff --git a/drivers/net/ax88180.c b/drivers/net/ax88180.c index d13eb11187c..2715653cd45 100644 --- a/drivers/net/ax88180.c +++ b/drivers/net/ax88180.c @@ -118,7 +118,7 @@ static int ax88180_phy_reset (struct eth_device *dev) /* Wait for the reset to complete, or time out (500 ms) */ while (ax88180_mdio_read (dev, MII_BMCR) & BMCR_RESET) { - udelay (1000); + udelay(1000); if (--delay_cnt == 0) { printf ("Failed to reset PHY!\n"); return -1; @@ -177,7 +177,7 @@ static int ax88180_poll_tx_complete (struct eth_device *dev) if ((tmpval & txbs_txdp) == 0) break; - udelay (100); + udelay(100); } if (TimeOutCnt) @@ -342,7 +342,7 @@ static void ax88180_media_config (struct eth_device *dev) if (bmsr_val & BMSR_LSTATUS) { break; } - udelay (100); + udelay(100); } bmsr_val = ax88180_mdio_read (dev, MII_BMSR); @@ -364,7 +364,7 @@ static void ax88180_media_config (struct eth_device *dev) if (bmsr_val & BMSR_ANEGCOMPLETE) { break; } - udelay (100); + udelay(100); } } else debug ("ax88180: Auto-negotiation is disabled.\n"); @@ -680,7 +680,7 @@ static void ax88180_read_mac_addr (struct eth_device *dev) tmp_regval = INW (dev, PROMCTRL); if ((tmp_regval & RELOAD_EEPROM) == 0) break; - udelay (1000); + udelay(1000); } /* Get MAC addresses */ diff --git a/drivers/net/eepro100.c b/drivers/net/eepro100.c index 2fe0ba6e20f..36a9d4d91c3 100644 --- a/drivers/net/eepro100.c +++ b/drivers/net/eepro100.c @@ -462,7 +462,7 @@ int eepro100_initialize (bd_t * bis) */ pci_write_config_byte (devno, PCI_LATENCY_TIMER, 0x20); - udelay (10 * 1000); + udelay(10 * 1000); read_hw_addr (dev, bis); } @@ -480,10 +480,10 @@ static int eepro100_init (struct eth_device *dev, bd_t * bis) /* Reset the ethernet controller */ OUTL (dev, I82559_SELECTIVE_RESET, SCBPort); - udelay (20); + udelay(20); OUTL (dev, I82559_RESET, SCBPort); - udelay (20); + udelay(20); if (!wait_for_eepro100 (dev)) { printf ("Error: Can not reset ethernet controller.\n"); @@ -721,10 +721,10 @@ static void eepro100_halt (struct eth_device *dev) /* Reset the ethernet controller */ OUTL (dev, I82559_SELECTIVE_RESET, SCBPort); - udelay (20); + udelay(20); OUTL (dev, I82559_RESET, SCBPort); - udelay (20); + udelay(20); if (!wait_for_eepro100 (dev)) { printf ("Error: Can not reset ethernet controller.\n"); @@ -760,19 +760,19 @@ static int read_eeprom (struct eth_device *dev, int location, int addr_len) short dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0; OUTW (dev, EE_ENB | dataval, SCBeeprom); - udelay (1); + udelay(1); OUTW (dev, EE_ENB | dataval | EE_SHIFT_CLK, SCBeeprom); - udelay (1); + udelay(1); } OUTW (dev, EE_ENB, SCBeeprom); for (i = 15; i >= 0; i--) { OUTW (dev, EE_ENB | EE_SHIFT_CLK, SCBeeprom); - udelay (1); + udelay(1); retval = (retval << 1) | ((INW (dev, SCBeeprom) & EE_DATA_READ) ? 1 : 0); OUTW (dev, EE_ENB, SCBeeprom); - udelay (1); + udelay(1); } /* Terminate the EEPROM access. */ diff --git a/drivers/net/lan91c96.c b/drivers/net/lan91c96.c index c08bd21f95a..1989b66a486 100644 --- a/drivers/net/lan91c96.c +++ b/drivers/net/lan91c96.c @@ -211,7 +211,7 @@ static void smc_reset(struct eth_device *dev) SMC_SELECT_BANK(dev, 0); SMC_outw(dev, LAN91C96_RCR_SOFT_RST, LAN91C96_RCR); - udelay (10); + udelay(10); /* Disable transmit and receive functionality */ SMC_outw(dev, 0, LAN91C96_RCR); @@ -438,7 +438,7 @@ static int smc_send_packet(struct eth_device *dev, void *packet, /* wait for MMU getting ready (low) */ while (SMC_inw(dev, LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY) - udelay (10); + udelay(10); PRINTK2("MMU ready\n"); @@ -455,7 +455,7 @@ static int smc_send_packet(struct eth_device *dev, void *packet, /* wait for MMU getting ready (low) */ while (SMC_inw(dev, LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY) - udelay (10); + udelay(10); PRINTK2 ("MMU ready\n"); } @@ -600,13 +600,13 @@ static int smc_rcv(struct eth_device *dev) } while (SMC_inw(dev, LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY) - udelay (1); /* Wait until not busy */ + udelay(1); /* Wait until not busy */ /* error or good, tell the card to get rid of this packet */ SMC_outw(dev, LAN91C96_MMUCR_RELEASE_RX, LAN91C96_MMU); while (SMC_inw(dev, LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY) - udelay (1); /* Wait until not busy */ + udelay(1); /* Wait until not busy */ if (!is_error) { /* Pass the packet up to the protocol layers. */ diff --git a/drivers/net/rtl8139.c b/drivers/net/rtl8139.c index 67be1a3dc3f..b8c402270ab 100644 --- a/drivers/net/rtl8139.c +++ b/drivers/net/rtl8139.c @@ -237,7 +237,7 @@ int rtl8139_initialize(bd_t *bis) pci_write_config_byte (devno, PCI_LATENCY_TIMER, 0x20); - udelay (10 * 1000); + udelay(10 * 1000); } return card_number; @@ -357,7 +357,7 @@ static void rtl_reset(struct eth_device *dev) /* Give the chip 10ms to finish the reset. */ for (i=0; i<100; ++i){ if ((inb(ioaddr + ChipCmd) & CmdReset) == 0) break; - udelay (100); /* wait 100us */ + udelay(100); /* wait 100us */ } @@ -528,6 +528,6 @@ static void rtl_disable(struct eth_device *dev) /* Give the chip 10ms to finish the reset. */ for (i=0; i<100; ++i){ if ((inb(ioaddr + ChipCmd) & CmdReset) == 0) break; - udelay (100); /* wait 100us */ + udelay(100); /* wait 100us */ } } diff --git a/drivers/net/smc91111.c b/drivers/net/smc91111.c index 5754c3106c9..52bbf05a1e0 100644 --- a/drivers/net/smc91111.c +++ b/drivers/net/smc91111.c @@ -266,7 +266,7 @@ static inline void smc_wait_mmu_release_complete (struct eth_device *dev) /* assume bank 2 selected */ while (SMC_inw (dev, MMU_CMD_REG) & MC_BUSY) { - udelay (1); /* Wait until not busy */ + udelay(1); /* Wait until not busy */ if (++count > 200) break; } @@ -318,7 +318,7 @@ static void smc_reset (struct eth_device *dev) SMC_SELECT_BANK (dev, 0); /* this should pause enough for the chip to be happy */ - udelay (10); + udelay(10); /* Disable transmit and receive functionality */ SMC_outw (dev, RCR_CLEAR, RCR_REG); @@ -333,7 +333,7 @@ static void smc_reset (struct eth_device *dev) smc_wait_mmu_release_complete (dev); SMC_outw (dev, MC_RESET, MMU_CMD_REG); while (SMC_inw (dev, MMU_CMD_REG) & MC_BUSY) - udelay (1); /* Wait until not busy */ + udelay(1); /* Wait until not busy */ /* Note: It doesn't seem that waiting for the MMU busy is needed here, but this is a place where future chipsets _COULD_ break. Be wary @@ -564,7 +564,7 @@ again: /* wait for MMU getting ready (low) */ while (SMC_inw (dev, MMU_CMD_REG) & MC_BUSY) { - udelay (10); + udelay(10); } PRINTK2 ("MMU ready\n"); @@ -583,7 +583,7 @@ again: /* wait for MMU getting ready (low) */ while (SMC_inw (dev, MMU_CMD_REG) & MC_BUSY) { - udelay (10); + udelay(10); } PRINTK2 ("MMU ready\n"); @@ -957,19 +957,19 @@ static word smc_read_phy_register (struct eth_device *dev, byte phyreg) for (i = 0; i < sizeof bits; ++i) { /* Clock Low - output data */ SMC_outw (dev, mii_reg | bits[i], MII_REG); - udelay (SMC_PHY_CLOCK_DELAY); + udelay(SMC_PHY_CLOCK_DELAY); /* Clock Hi - input data */ SMC_outw (dev, mii_reg | bits[i] | MII_MCLK, MII_REG); - udelay (SMC_PHY_CLOCK_DELAY); + udelay(SMC_PHY_CLOCK_DELAY); bits[i] |= SMC_inw (dev, MII_REG) & MII_MDI; } /* Return to idle state */ /* Set clock to low, data to low, and output tristated */ SMC_outw (dev, mii_reg, MII_REG); - udelay (SMC_PHY_CLOCK_DELAY); + udelay(SMC_PHY_CLOCK_DELAY); /* Restore original bank select */ SMC_SELECT_BANK (dev, oldBank); @@ -1078,19 +1078,19 @@ static void smc_write_phy_register (struct eth_device *dev, byte phyreg, for (i = 0; i < sizeof bits; ++i) { /* Clock Low - output data */ SMC_outw (dev, mii_reg | bits[i], MII_REG); - udelay (SMC_PHY_CLOCK_DELAY); + udelay(SMC_PHY_CLOCK_DELAY); /* Clock Hi - input data */ SMC_outw (dev, mii_reg | bits[i] | MII_MCLK, MII_REG); - udelay (SMC_PHY_CLOCK_DELAY); + udelay(SMC_PHY_CLOCK_DELAY); bits[i] |= SMC_inw (dev, MII_REG) & MII_MDI; } /* Return to idle state */ /* Set clock to low, data to low, and output tristated */ SMC_outw (dev, mii_reg, MII_REG); - udelay (SMC_PHY_CLOCK_DELAY); + udelay(SMC_PHY_CLOCK_DELAY); /* Restore original bank select */ SMC_SELECT_BANK (dev, oldBank); diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c index 94253797946..1dae2615095 100644 --- a/drivers/qe/uec_phy.c +++ b/drivers/qe/uec_phy.c @@ -875,7 +875,7 @@ void marvell_phy_interface_mode(struct eth_device *dev, phy_interface_t type, uec_phy_write(mii_info, 0x04, 0x01e1); uec_phy_write(mii_info, 0x00, 0x9140); uec_phy_write(mii_info, 0x00, 0x1000); - udelay (100000); + mdelay(100); uec_phy_write(mii_info, 0x00, 0x2900); uec_phy_write(mii_info, 0x14, 0x0cd2); uec_phy_write(mii_info, 0x00, 0xa100); @@ -884,13 +884,13 @@ void marvell_phy_interface_mode(struct eth_device *dev, phy_interface_t type, uec_phy_write(mii_info, 0x04, 0x05e1); uec_phy_write(mii_info, 0x00, 0xa100); uec_phy_write(mii_info, 0x00, 0x2100); - udelay (1000000); + mdelay(1000); } else if (speed == SPEED_10) { uec_phy_write(mii_info, 0x14, 0x8e40); uec_phy_write(mii_info, 0x1b, 0x800b); uec_phy_write(mii_info, 0x14, 0x0c82); uec_phy_write(mii_info, 0x00, 0x8100); - udelay (1000000); + mdelay(1000); } } diff --git a/drivers/rtc/ds1306.c b/drivers/rtc/ds1306.c index 02d617e09c9..1bd1151e1b3 100644 --- a/drivers/rtc/ds1306.c +++ b/drivers/rtc/ds1306.c @@ -71,7 +71,7 @@ int rtc_get (struct rtc_time *tmp) /* Now we can enable the DS1306 RTC */ immap->im_cpm.cp_pbdat |= PB_SPI_CE; - udelay (10); + udelay(10); /* Shift out the address (0) of the time in the Clock Chip */ soft_spi_send (0); @@ -105,7 +105,7 @@ int rtc_get (struct rtc_time *tmp) /* Now we can disable the DS1306 RTC */ immap->im_cpm.cp_pbdat &= ~PB_SPI_CE; /* Disable DS1306 Chip */ - udelay (10); + udelay(10); rtc_calc_weekday(tmp); /* Determine the day of week */ @@ -127,7 +127,7 @@ int rtc_set (struct rtc_time *tmp) /* Now we can enable the DS1306 RTC */ immap->im_cpm.cp_pbdat |= PB_SPI_CE; /* Enable DS1306 Chip */ - udelay (10); + udelay(10); /* First disable write protect in the clock chip control register */ soft_spi_send (0x8F); /* send address of the control register */ @@ -135,11 +135,11 @@ int rtc_set (struct rtc_time *tmp) /* Now disable the DS1306 to terminate the write */ immap->im_cpm.cp_pbdat &= ~PB_SPI_CE; - udelay (10); + udelay(10); /* Now enable the DS1306 to initiate a new write */ immap->im_cpm.cp_pbdat |= PB_SPI_CE; - udelay (10); + udelay(10); /* Next, send the address of the clock time write registers */ soft_spi_send (0x80); /* send address of the first time register */ @@ -156,11 +156,11 @@ int rtc_set (struct rtc_time *tmp) /* Now we can disable the Clock chip to terminate the burst write */ immap->im_cpm.cp_pbdat &= ~PB_SPI_CE; /* Disable DS1306 Chip */ - udelay (10); + udelay(10); /* Now we can enable the Clock chip to initiate a new write */ immap->im_cpm.cp_pbdat |= PB_SPI_CE; /* Enable DS1306 Chip */ - udelay (10); + udelay(10); /* First we Enable write protect in the clock chip control register */ soft_spi_send (0x8F); /* send address of the control register */ @@ -168,7 +168,7 @@ int rtc_set (struct rtc_time *tmp) /* Now disable the DS1306 */ immap->im_cpm.cp_pbdat &= ~PB_SPI_CE; /* Disable DS1306 Chip */ - udelay (10); + udelay(10); /* Set standard MPC8xx clock to the same time so Linux will * see the time even if it doesn't have a DS1306 clock driver. @@ -204,7 +204,7 @@ static void init_spi (void) immap->im_cpm.cp_pbdir |= (PB_SPIMOSI | PB_SPI_CE | PB_SPISCK); immap->im_cpm.cp_pbdir &= ~PB_SPIMISO; /* Make MISO pin an input */ - udelay (10); + udelay(10); } /* ------------------------------------------------------------------------- */ @@ -227,10 +227,10 @@ static void soft_spi_send (unsigned char n) immap->im_cpm.cp_pbdat |= PB_SPIMOSI; /* Set MOSI to 1 */ else immap->im_cpm.cp_pbdat &= ~PB_SPIMOSI; /* Set MOSI to 0 */ - udelay (10); + udelay(10); immap->im_cpm.cp_pbdat &= ~PB_SPISCK; /* Lower SCK */ - udelay (10); + udelay(10); bitpos >>= 1; /* Shift for next bit position */ } @@ -253,11 +253,11 @@ static unsigned char soft_spi_read (void) /* Read 8 bits here */ for (i = 0; i < 8; i++) { /* Do 8 bits in loop */ immap->im_cpm.cp_pbdat |= PB_SPISCK; /* Raise SCK */ - udelay (10); + udelay(10); if (immap->im_cpm.cp_pbdat & PB_SPIMISO) /* Get a bit of data */ spi_byte |= bitpos; /* Set data accordingly */ immap->im_cpm.cp_pbdat &= ~PB_SPISCK; /* Lower SCK */ - udelay (10); + udelay(10); bitpos >>= 1; /* Shift for next bit position */ } diff --git a/drivers/video/mb862xx.c b/drivers/video/mb862xx.c index 301c1f0df17..a3a7a8dd98d 100644 --- a/drivers/video/mb862xx.c +++ b/drivers/video/mb862xx.c @@ -79,7 +79,7 @@ static void gdc_sw_reset (void) GraphicDevice *dev = &mb862xx; HOST_WR_REG (GC_SRST, 0x1); - udelay (500); + udelay(500); video_hw_init (); } @@ -222,9 +222,9 @@ unsigned int pci_video_init (void) /* Setup clocks and memory mode for Coral-P(A) */ HOST_WR_REG(GC_CCF, CONFIG_SYS_MB862xx_CCF); - udelay (200); + udelay(200); HOST_WR_REG(GC_MMR, CONFIG_SYS_MB862xx_MMR); - udelay (100); + udelay(100); return dev->frameAdrs; } diff --git a/examples/standalone/smc91111_eeprom.c b/examples/standalone/smc91111_eeprom.c index a43d14f3967..631b1b04d6f 100644 --- a/examples/standalone/smc91111_eeprom.c +++ b/examples/standalone/smc91111_eeprom.c @@ -237,7 +237,7 @@ void copy_from_eeprom (struct eth_device *dev) CTL_RELOAD, CTL_REG); i = 100; while ((SMC_inw (dev, CTL_REG) & CTL_RELOAD) && --i) - udelay (100); + udelay(100); if (i == 0) { printf ("Timeout Refreshing EEPROM registers\n"); } else { @@ -318,7 +318,7 @@ int read_eeprom_reg (struct eth_device *dev, int reg) CTL_RELOAD, CTL_REG); timeout = 100; while ((SMC_inw (dev, CTL_REG) & CTL_RELOAD) && --timeout) - udelay (100); + udelay(100); if (timeout == 0) { printf ("Timeout Reading EEPROM register %02x\n", reg); return 0; @@ -341,7 +341,7 @@ int write_eeprom_reg (struct eth_device *dev, int value, int reg) CTL_STORE, CTL_REG); timeout = 100; while ((SMC_inw (dev, CTL_REG) & CTL_STORE) && --timeout) - udelay (100); + udelay(100); if (timeout == 0) { printf ("Timeout Writing EEPROM register %02x\n", reg); return 0; diff --git a/lib/time.c b/lib/time.c index 3d6447d7c0a..551698e36d0 100644 --- a/lib/time.c +++ b/lib/time.c @@ -183,7 +183,7 @@ void udelay(unsigned long usec) do { WATCHDOG_RESET(); kv = usec > CONFIG_WD_PERIOD ? CONFIG_WD_PERIOD : usec; - __udelay (kv); + __udelay(kv); usec -= kv; } while(usec); }