From patchwork Tue Apr 7 09:09:16 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Marek Vasut X-Patchwork-Id: 237306 List-Id: U-Boot discussion From: marex at denx.de (Marek Vasut) Date: Tue, 7 Apr 2020 11:09:16 +0200 Subject: [PATCH 6/6] ARM: stm32: Implement DDR3 coding on DHCOR SoM In-Reply-To: <20200407090916.2966-1-marex@denx.de> References: <20200407090916.2966-1-marex@denx.de> Message-ID: <20200407090916.2966-6-marex@denx.de> The DHCOR board does exist in multiple variants with different DDR3 DRAM sizes. To cater for all of them, implement DDR3 code handling. There are two GPIOs which code the DRAM size populated on the SoM, read them out and use the value to pick the correct DDR3 config. Signed-off-by: Marek Vasut Cc: Manivannan Sadhasivam Cc: Patrick Delaunay Cc: Patrice Chotard --- arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi | 2 ++ arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi | 2 ++ board/dhelectronics/dh_stm32mp1/board.c | 26 +++++++++++++++++++++- configs/stm32mp15_dhcom_basic_defconfig | 1 + configs/stm32mp15_dhcor_basic_defconfig | 1 + 5 files changed, 31 insertions(+), 1 deletion(-) diff --git a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi index fcdc5e6859..54416acd5c 100644 --- a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi @@ -5,6 +5,7 @@ #include #include "stm32mp157-u-boot.dtsi" +#include "stm32mp15-ddr3-1x4Gb-1066-binG.dtsi" #include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi" / { @@ -26,6 +27,7 @@ st,stm32prog-gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; #gpio-cells = <2>; dh,som-coding-gpios = <&gpiof 12 0>, <&gpiof 13 0>, <&gpiof 15 0>; + dh,ddr3-coding-gpios = <&gpioz 6 0>, <&gpioz 7 0>; }; led { diff --git a/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi index 17a23ae21c..6db4ac37e1 100644 --- a/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi @@ -9,6 +9,7 @@ #include #include "stm32mp157-u-boot.dtsi" +#include "stm32mp15-ddr3-1x4Gb-1066-binG.dtsi" #include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi" / { @@ -16,6 +17,7 @@ config { u-boot,dm-pre-reloc; #gpio-cells = <2>; + dh,ddr3-coding-gpios = <&gpiog 0 0>, <&gpiog 1 0>; dh,som-coding-gpios = <&gpioz 7 0>, <&gpiof 3 0>; }; }; diff --git a/board/dhelectronics/dh_stm32mp1/board.c b/board/dhelectronics/dh_stm32mp1/board.c index b72d113a6f..e0039ebce8 100644 --- a/board/dhelectronics/dh_stm32mp1/board.c +++ b/board/dhelectronics/dh_stm32mp1/board.c @@ -135,6 +135,7 @@ int checkboard(void) #ifdef CONFIG_BOARD_EARLY_INIT_F static u8 brdcode __section("data"); +static u8 ddr3code __section("data"); static u8 somcode __section("data"); static void board_get_coding_straps(void) @@ -150,6 +151,7 @@ static void board_get_coding_straps(void) } brdcode = 0; + ddr3code = 0; somcode = 0; ret = gpio_request_list_by_name_nodev(node, "dh,som-coding-gpios", @@ -158,13 +160,34 @@ static void board_get_coding_straps(void) for (i = 0; i < ret; i++) somcode |= !!dm_gpio_get_value(&(gpio[i])) << i; + ret = gpio_request_list_by_name_nodev(node, "dh,ddr3-coding-gpios", + gpio, ARRAY_SIZE(gpio), + GPIOD_IS_IN); + for (i = 0; i < ret; i++) + ddr3code |= !!dm_gpio_get_value(&(gpio[i])) << i; + ret = gpio_request_list_by_name_nodev(node, "dh,board-coding-gpios", gpio, ARRAY_SIZE(gpio), GPIOD_IS_IN); for (i = 0; i < ret; i++) brdcode |= !!dm_gpio_get_value(&(gpio[i])) << i; - printf("Code: SoM:rev=%d Board:rev=%d\n", somcode, brdcode); + printf("Code: SoM:rev=%d,ddr3=%d Board:rev=%d\n", + somcode, ddr3code, brdcode); +} + +int board_stm32mp1_ddr_config_name_match(struct udevice *dev, + const char *name) +{ + if (ddr3code == 2 && + !strcmp(name, "config at ddr3-1066-888-bin-g-1x4gb-533mhz")) + return 0; + + if (ddr3code == 3 && + !strcmp(name, "config at ddr3-1066-888-bin-g-2x4gb-533mhz")) + return 0; + + return -EINVAL; } int board_early_init_f(void) @@ -537,6 +560,7 @@ int board_late_init(void) #ifdef CONFIG_BOARD_EARLY_INIT_F env_set_ulong("dh_som_rev", somcode); env_set_ulong("dh_board_rev", brdcode); + env_set_ulong("dh_ddr3_code", ddr3code); #endif return 0; diff --git a/configs/stm32mp15_dhcom_basic_defconfig b/configs/stm32mp15_dhcom_basic_defconfig index 9ad7ba9c54..8ca5b825a9 100644 --- a/configs/stm32mp15_dhcom_basic_defconfig +++ b/configs/stm32mp15_dhcom_basic_defconfig @@ -14,6 +14,7 @@ CONFIG_FIT=y CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_FIT_SOURCE="board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its" CONFIG_BOOTCOMMAND="run bootcmd_stm32mp" +CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_LEGACY_IMAGE_SUPPORT=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3 diff --git a/configs/stm32mp15_dhcor_basic_defconfig b/configs/stm32mp15_dhcor_basic_defconfig index b7be88c3a6..9dc5323013 100644 --- a/configs/stm32mp15_dhcor_basic_defconfig +++ b/configs/stm32mp15_dhcor_basic_defconfig @@ -14,6 +14,7 @@ CONFIG_FIT=y CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_FIT_SOURCE="board/dhelectronics/dh_stm32mp1/u-boot-dhcor.its" CONFIG_BOOTCOMMAND="run bootcmd_stm32mp" +CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_LEGACY_IMAGE_SUPPORT=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3