| Message ID | 20200402132913.23245-2-vigneshr@ti.com |
|---|---|
| State | Accepted |
| Commit | aaf55800a36fc9ffede4d072e96231a1deaa8a43 |
| Headers | show |
| Series | [1/2] arm: dts: k3-am654: Increase OSPI default frequency to 50MHz | expand |
diff --git a/arch/arm/dts/k3-j721e-r5-common-proc-board.dts b/arch/arm/dts/k3-j721e-r5-common-proc-board.dts index 403b158f4900..2dde65d9681d 100644 --- a/arch/arm/dts/k3-j721e-r5-common-proc-board.dts +++ b/arch/arm/dts/k3-j721e-r5-common-proc-board.dts @@ -309,7 +309,7 @@ reg = <0x0>; spi-tx-bus-width = <1>; spi-rx-bus-width = <8>; - spi-max-frequency = <40000000>; + spi-max-frequency = <50000000>; cdns,tshsl-ns = <60>; cdns,tsd2d-ns = <60>; cdns,tchsh-ns = <60>; diff --git a/arch/arm/dts/k3-j721e-som-p0.dtsi b/arch/arm/dts/k3-j721e-som-p0.dtsi index 8497ff3e3e12..946de9c3fc69 100644 --- a/arch/arm/dts/k3-j721e-som-p0.dtsi +++ b/arch/arm/dts/k3-j721e-som-p0.dtsi @@ -87,7 +87,7 @@ reg = <0x0>; spi-tx-bus-width = <1>; spi-rx-bus-width = <8>; - spi-max-frequency = <40000000>; + spi-max-frequency = <50000000>; cdns,tshsl-ns = <60>; cdns,tsd2d-ns = <60>; cdns,tchsh-ns = <60>;
In 1 bit mode OSPI can work at upto 50MHz, this provides before write performance. Therefore increase frequency from 40MHz to 50MHz Signed-off-by: Vignesh Raghavendra <vigneshr at ti.com> --- arch/arm/dts/k3-j721e-r5-common-proc-board.dts | 2 +- arch/arm/dts/k3-j721e-som-p0.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)