From patchwork Tue Mar 31 00:48:39 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Marek Vasut X-Patchwork-Id: 244619 List-Id: U-Boot discussion From: marex at denx.de (Marek Vasut) Date: Tue, 31 Mar 2020 02:48:39 +0200 Subject: [PATCH V2 02/14] ARM: dts: stm32: Add alternate pinmux for SDMMC1 direction pins In-Reply-To: <20200331004851.282583-1-marex@denx.de> References: <20200331004851.282583-1-marex@denx.de> Message-ID: <20200331004851.282583-3-marex@denx.de> Add another mux option for SDMMC1 direction pins, in particular SDMMC1_D123DIR, this is used on AV96 board. Signed-off-by: Marek Vasut Cc: Patrick Delaunay Cc: Patrice Chotard Reviewed-by: Patrice Chotard Reviewed-by: Patrick Delaunay --- V2: New patch --- arch/arm/dts/stm32mp157-pinctrl.dtsi | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/arch/arm/dts/stm32mp157-pinctrl.dtsi b/arch/arm/dts/stm32mp157-pinctrl.dtsi index 81a363d93d..6842d4cdca 100644 --- a/arch/arm/dts/stm32mp157-pinctrl.dtsi +++ b/arch/arm/dts/stm32mp157-pinctrl.dtsi @@ -832,6 +832,30 @@ }; }; + sdmmc1_dir_pins_b: sdmmc1-dir-1 { + pins1 { + pinmux = , /* SDMMC1_D0DIR */ + , /* SDMMC1_D123DIR */ + ; /* SDMMC1_CDIR */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2{ + pinmux = ; /* SDMMC1_CKIN */ + bias-pull-up; + }; + }; + + sdmmc1_dir_sleep_pins_b: sdmmc1-dir-sleep-1 { + pins { + pinmux = , /* SDMMC1_D0DIR */ + , /* SDMMC1_D123DIR */ + , /* SDMMC1_CDIR */ + ; /* SDMMC1_CKIN */ + }; + }; + sdmmc2_b4_pins_a: sdmmc2-b4-0 { pins1 { pinmux = , /* SDMMC2_D0 */