From patchwork Mon Mar 30 23:12:45 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Simon Glass X-Patchwork-Id: 244577 List-Id: U-Boot discussion From: sjg at chromium.org (Simon Glass) Date: Mon, 30 Mar 2020 17:12:45 -0600 Subject: [PATCH v3 09/29] x86: apl: Move p2sb ofdata reading to the correct method In-Reply-To: <20200330231305.130488-1-sjg@chromium.org> References: <20200330231305.130488-1-sjg@chromium.org> Message-ID: <20200330171226.v3.9.Iff8dfbeef5f76f776cf3a84807b0ff3fd5a491ac@changeid> With P2SB the initial BAR (base-address register) is set up by TPL and this is used unchanged right through U-Boot. At present the reading of this address is split between the ofdata() and probe() methods. There are a few problems that are unique to the p2sb. One is that its children need to call pcr_read32(), etc. which needs to have the p2sb address correct. Also some of its children are pinctrl devices and pinctrl is used when any device is probed. So p2sb really needs to get its base address set up in ofdata_to_platdata(), before it is probed. Another point is that reading the p2sb BAR will not work if the p2sb is hidden. The FSP-S seems to hide it, presumably to avoid confusing PCI enumeration. Reading ofdata in ofdata_to_platdata() is the correct place anyway, so this is easy to fix. Move the code into one place and use the early-regs property in all cases for simplicity and to avoid needing to probe any PCI devices just to read the BAR. Signed-off-by: Simon Glass Reviewed-by: Wolfgang Wallner Tested-by: Wolfgang Wallner --- Changes in v3: - Fix indenting error mentioned by Andy Shevchenko Changes in v2: None arch/x86/cpu/intel_common/p2sb.c | 33 +++++++++++--------------------- 1 file changed, 11 insertions(+), 22 deletions(-) diff --git a/arch/x86/cpu/intel_common/p2sb.c b/arch/x86/cpu/intel_common/p2sb.c index d5b4846e0a2..6f3c4416186 100644 --- a/arch/x86/cpu/intel_common/p2sb.c +++ b/arch/x86/cpu/intel_common/p2sb.c @@ -92,46 +92,35 @@ int p2sb_ofdata_to_platdata(struct udevice *dev) #if !CONFIG_IS_ENABLED(OF_PLATDATA) int ret; + u32 base[2]; + ret = dev_read_u32_array(dev, "early-regs", base, ARRAY_SIZE(base)); + if (ret) + return log_msg_ret("Missing/short early-regs", ret); + plat->mmio_base = base[0]; + /* TPL sets up the initial BAR */ if (spl_phase() == PHASE_TPL) { - u32 base[2]; - - /* TPL sets up the initial BAR */ - ret = dev_read_u32_array(dev, "early-regs", base, - ARRAY_SIZE(base)); - if (ret) - return log_msg_ret("Missing/short early-regs", ret); - plat->mmio_base = base[0]; plat->bdf = pci_get_devfn(dev); if (plat->bdf < 0) return log_msg_ret("Cannot get p2sb PCI address", plat->bdf); } + upriv->mmio_base = plat->mmio_base; #else plat->mmio_base = plat->dtplat.early_regs[0]; plat->bdf = pci_ofplat_get_devfn(plat->dtplat.reg[0]); -#endif upriv->mmio_base = plat->mmio_base; - debug("p2sb: mmio_base=%x\n", (uint)plat->mmio_base); +#endif return 0; } static int p2sb_probe(struct udevice *dev) { - if (spl_phase() == PHASE_TPL) { + if (spl_phase() == PHASE_TPL) return p2sb_early_init(dev); - } else { - struct p2sb_platdata *plat = dev_get_platdata(dev); - - plat->mmio_base = dev_read_addr_pci(dev); - /* Don't set BDF since it should not be used */ - if (!plat->mmio_base || plat->mmio_base == FDT_ADDR_T_NONE) - return -EINVAL; - - if (spl_phase() == PHASE_SPL) - return p2sb_spl_init(dev); - } + else if (spl_phase() == PHASE_SPL) + return p2sb_spl_init(dev); return 0; }