From patchwork Sat Mar 28 01:01:58 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Marek Vasut X-Patchwork-Id: 244441 List-Id: U-Boot discussion From: marex at denx.de (Marek Vasut) Date: Sat, 28 Mar 2020 02:01:58 +0100 Subject: [PATCH V4] ARM: dts: stm32: Add KS8851-16MLL ethernet on FMC2 Message-ID: <20200328010158.506777-1-marex@denx.de> Add DT entries, Kconfig entries and board-specific entries to configure FMC2 bus and make KS8851-16MLL on that bus accessible to U-Boot. Signed-off-by: Marek Vasut Cc: Patrick Delaunay Cc: Patrice Chotard Reviewed-by: Patrice Chotard --- V2: Configure FMC2 nCS4 for SRAM as well V3: Adjust the register macros V4: Use more macros --- arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi | 68 ++++++++++++++++++++++ board/dhelectronics/dh_stm32mp1/board.c | 52 +++++++++++++++++ configs/stm32mp15_dhcom_basic_defconfig | 1 + 3 files changed, 121 insertions(+) diff --git a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi index 6c952a57ee..eba3588540 100644 --- a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi @@ -37,6 +37,12 @@ default-state = "on"; }; }; + + /* This is actually on FMC2, but we do not have bus driver for that */ + ksz8851: ks8851mll at 64000000 { + compatible = "micrel,ks8851-mll"; + reg = <0x64000000 0x20000>; + }; }; &i2c4 { @@ -50,6 +56,68 @@ }; }; +&pinctrl { + /* These should bound to FMC2 bus driver, but we do not have one */ + pinctrl-0 = <&fmc_pins_b>; + pinctrl-1 = <&fmc_sleep_pins_b>; + pinctrl-names = "default", "sleep"; + + fmc_pins_b: fmc-0 { + pins1 { + pinmux = , /* FMC_NOE */ + , /* FMC_NWE */ + , /* FMC_NL */ + , /* FMC_D0 */ + , /* FMC_D1 */ + , /* FMC_D2 */ + , /* FMC_D3 */ + , /* FMC_D4 */ + , /* FMC_D5 */ + , /* FMC_D6 */ + , /* FMC_D7 */ + , /* FMC_D8 */ + , /* FMC_D9 */ + , /* FMC_D10 */ + , /* FMC_D11 */ + , /* FMC_D12 */ + , /* FMC_D13 */ + , /* FMC_D14 */ + , /* FMC_D15 */ + , /* FMC_NE2_FMC_NCE */ + ; /* FMC_NE4 */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + }; + + fmc_sleep_pins_b: fmc-sleep-0 { + pins { + pinmux = , /* FMC_NOE */ + , /* FMC_NWE */ + , /* FMC_NL */ + , /* FMC_D0 */ + , /* FMC_D1 */ + , /* FMC_D2 */ + , /* FMC_D3 */ + , /* FMC_D4 */ + , /* FMC_D5 */ + , /* FMC_D6 */ + , /* FMC_D7 */ + , /* FMC_D8 */ + , /* FMC_D9 */ + , /* FMC_D10 */ + , /* FMC_D11 */ + , /* FMC_D12 */ + , /* FMC_D13 */ + , /* FMC_D14 */ + , /* FMC_D15 */ + , /* FMC_NE2_FMC_NCE */ + ; /* FMC_NE4 */ + }; + }; +}; + &pmic { u-boot,dm-pre-reloc; }; diff --git a/board/dhelectronics/dh_stm32mp1/board.c b/board/dhelectronics/dh_stm32mp1/board.c index 7bcd713a86..a3458a2623 100644 --- a/board/dhelectronics/dh_stm32mp1/board.c +++ b/board/dhelectronics/dh_stm32mp1/board.c @@ -375,6 +375,56 @@ static void sysconf_init(void) #endif } +static void board_init_fmc2(void) +{ +#define STM32_FMC2_BCR1 0x0 +#define STM32_FMC2_BTR1 0x4 +#define STM32_FMC2_BWTR1 0x104 +#define STM32_FMC2_BCR(x) ((x) * 0x8 + STM32_FMC2_BCR1) +#define STM32_FMC2_BCRx_FMCEN BIT(31) +#define STM32_FMC2_BCRx_WREN BIT(12) +#define STM32_FMC2_BCRx_RSVD BIT(7) +#define STM32_FMC2_BCRx_FACCEN BIT(6) +#define STM32_FMC2_BCRx_MWID(n) ((n) << 4) +#define STM32_FMC2_BCRx_MTYP(n) ((n) << 2) +#define STM32_FMC2_BCRx_MUXEN BIT(1) +#define STM32_FMC2_BCRx_MBKEN BIT(0) +#define STM32_FMC2_BTR(x) ((x) * 0x8 + STM32_FMC2_BTR1) +#define STM32_FMC2_BTRx_DATAHLD(n) ((n) << 30) +#define STM32_FMC2_BTRx_BUSTURN(n) ((n) << 16) +#define STM32_FMC2_BTRx_DATAST(n) ((n) << 8) +#define STM32_FMC2_BTRx_ADDHLD(n) ((n) << 4) +#define STM32_FMC2_BTRx_ADDSET(n) ((n) << 0) + +#define RCC_MP_AHB6RSTCLRR 0x218 +#define RCC_MP_AHB6RSTCLRR_FMCRST BIT(12) +#define RCC_MP_AHB6ENSETR 0x19c +#define RCC_MP_AHB6ENSETR_FMCEN BIT(12) + + const u32 bcr = STM32_FMC2_BCRx_WREN |STM32_FMC2_BCRx_RSVD | + STM32_FMC2_BCRx_FACCEN | STM32_FMC2_BCRx_MWID(1) | + STM32_FMC2_BCRx_MTYP(2) | STM32_FMC2_BCRx_MUXEN | + STM32_FMC2_BCRx_MBKEN; + const u32 btr = STM32_FMC2_BTRx_DATAHLD(3) | + STM32_FMC2_BTRx_BUSTURN(2) | + STM32_FMC2_BTRx_DATAST(0x22) | + STM32_FMC2_BTRx_ADDHLD(2) | + STM32_FMC2_BTRx_ADDSET(2); + + /* Set up FMC2 bus for KS8851-16MLL and X11 SRAM */ + writel(RCC_MP_AHB6RSTCLRR_FMCRST, STM32_RCC_BASE + RCC_MP_AHB6RSTCLRR); + writel(RCC_MP_AHB6ENSETR_FMCEN, STM32_RCC_BASE + RCC_MP_AHB6ENSETR); + + /* KS8851-16MLL -- Muxed mode */ + writel(bcr, STM32_FMC2_BASE + STM32_FMC2_BCR(1)); + writel(btr, STM32_FMC2_BASE + STM32_FMC2_BTR(1)); + /* AS7C34098 SRAM on X11 -- Muxed mode */ + writel(bcr, STM32_FMC2_BASE + STM32_FMC2_BCR(3)); + writel(btr, STM32_FMC2_BASE + STM32_FMC2_BTR(3)); + + setbits_le32(STM32_FMC2_BASE + STM32_FMC2_BCR1, STM32_FMC2_BCRx_FMCEN); +} + /* board dependent setup after realloc */ int board_init(void) { @@ -398,6 +448,8 @@ int board_init(void) sysconf_init(); + board_init_fmc2(); + if (CONFIG_IS_ENABLED(CONFIG_LED)) led_default_state(); diff --git a/configs/stm32mp15_dhcom_basic_defconfig b/configs/stm32mp15_dhcom_basic_defconfig index 921dea242a..683f15e7d5 100644 --- a/configs/stm32mp15_dhcom_basic_defconfig +++ b/configs/stm32mp15_dhcom_basic_defconfig @@ -93,6 +93,7 @@ CONFIG_SPI_FLASH_MTD=y CONFIG_SPL_SPI_FLASH_MTD=y CONFIG_DM_ETH=y CONFIG_DWC_ETH_QOS=y +CONFIG_KS8851_MLL=y CONFIG_PHY=y CONFIG_PHY_STM32_USBPHYC=y CONFIG_PINCONF=y